Search results for query: *

  • Users: bread
  • Content: Threads
  • Order by date
  1. bread

    Wish Add Micro Boost to Amp Preamp Boost Type

    I really like the Micro boost with the gain at around 0.65 and level at 5.0 because it provides a nice bit of fattening to the tone of the guitar. Similar to the Spark Booster in "fat" mode but with less gain. Any chance we could have it in the Amp Preamp Boost Type so I can have it as an...
  2. bread

    FS Fractal FC6 Mark 1 - UK Only

    I have an FC6 in very good condition. One slight scuff on the front as shown in the photos. £320 or nearest offer - standard postage included.
  3. bread

    GigRig 321 - Any User Feedback ?

    I'm intrigued by this new offering by Gigrig so I can use the same presets with my MM Luke IIIs and my Tele / Les Paul without having a volume drop. Does anyone have any experience with these please ? Thanks "Bread"
  4. bread

    Using Latching Stand-In Switches

    I'm going to use a stand in switch so that when pressed, it enables a filter to act as a boost. I've currently got it configured as a latching switch so that the light on the stand-in switch stays on so I know the boost is enabled. I don't like momentary because once pressed, the light on the...
  5. bread

    Solved - Layout Reverts Back to PP# Override

    I've installed an external switch which I want to use to select Presets. The FC button I've configured is on Layout 8 and I've named it "Presets", so when I hit the external switch, it accesses FC Button 7 on Layout 8, which, when selected loads Layout 6 which has all my presets on. The...
  6. bread

    Wish Echosex Delay

    The echosex delay would be a good effect to have if that's possible
  7. bread

    Orange Oil / Lemon Oil for Fretboards

    I've been using "Parker & Bailey Orange Oil Polish" on my guitar fretboards for about 10 years now. I've seen recent discussions online from folk who say that this can cause damage to the fretboard and instead use one of the branded guitar fretboard oils such as the Dunlop 65 Fretboard Oil that...
  8. bread

    AFIII That Eighties Band

    We helped a local theater out over the covid lockdowns to showcase some of the bands that play there. It was a really weird thing to do with no audience and social distancing, but I think we did ok. Everything is straight off the desk, 30 channels recorded direct with no processing whatsoever...
  9. bread

    Knowing the Neck

    Hs anyone got any good tips for learning all the notes on the neck of the guitar please? Thanks in advance
  10. bread

    OUT3 Level

    I've tried a number of times using a pedal in the loop (OUT3 -> IN3 in series) of my axe fx 3, but i always find the right side lower in volume by about 6db to the left hand side when looking at the output levels of the OUT1 block. I've checked the cables and connectors and also tried a...
  11. bread

    When....

    Going into a pub and there's a live band do you look at the valve amps and refer to them by their fractal equivalent names ? Asking for a friend LOL
  12. bread

    Gotoh BB-04 for MM Luke III

    Does anyone know if the Gotoh is a straight swap replacement for the Musicman battery box please ? Another Luke III failed on me yesterday so need to replace it. Thank you !
  13. bread

    Wish Output 1 Show Files

    Any chance we could have (for example) 20 or so Output 1 EQ presets so the EQ curve for each different venue can be saved and recalled ? Similar to how show files work on digital mixers, just limited to OUT 1 EQ curves.
  14. bread

    Output 1 EQ Question

    If Out1 is copied to Out 2 does this also mean Out1 EQ is also copied to Out2 EQ ? Thanks for your help
  15. bread

    DB Tecnologies ES802 for Monitoring

    Has anyone tried this pa as a monitoring system instead of studio monitors please? What was your experience ... I'm thinking if going for one of these instead of another pair of DXR10s...
  16. bread

    Cleaning Up Higher Gain Amps

    Hello I'm currently using the Plexi 50W Hi and I really love the crunchy sound of it from the stock settings. I'd like to clean the amp up but I was wondering if there are any other parameters in the amp block that would also need changing apart from the obvious reduction in the gain control ...
  17. bread

    Blowing on my strings

    It's complete bollocks but I think it's funny to see people's reactions. "Oooh he's blowing on his strings, he must be good".... LOL
  18. bread

    Dimension D Mode

    Does anyone know how I can get the classic Dimension D mode out of the Dimension 3 chorus block please? As I understand I need to switch the dimension mode to high but it sounds a bit off to me. Are there any tips please ? Thanks a ton
  19. bread

    Best IEM Remote Monitoring App for X32 ?

    I'm a bit confused about which is the beat app for this desk. There is M32Q and X-32Q does anyone know which one is better please ? I'm running latest software versions on X32 and X32r. Thanks !
  20. bread

    Preset Levelling Window vs Output Block Levels

    I'm using Axe Edit 1.12.07 with FW 20.04 and just noticed that the "Preset Levelling" level meters only go up to 10dB where the meters in the Output Block go up to about 20Db. Is this a bug or are the output levels in the block different to the output levels in the preset levelling window.
  21. bread

    Factory Reset ?

    Hello ! For the first time in what seems, years I'm experiencing all sorts of problems with my Axe FX III. It's a mark 1 unit from 2018 so about 4 years old. I'm running firmware 21 Beta 4, which I know is still under testing conditions and there are subsequent versions with many fixes by...
  22. bread

    Not a Bug FC EDIT renames all custom scene names on the FC12 the same as the first bank

    Axe FX FW 21.b4 Axe Edit Version 1.12.09 USB FW 1.14 1. FC EDIT renames all custom scene names (mini display label ) on the FC12 the same as the first bank when doing the following. Note : I use custom names (not the scene name) for my FC12 controller scribble strips throughout all my presets...
  23. bread

    Anyone using a Tone Concepts Luke ?

    I'm using a TC Electroncs spark booster to eq the front end of my Axe FX3 which I really like. Has anyone got any experience of using the Tone Concepts Luke to do a similar thing and if so what are your thoughts please? I know I could use a PEQ block or GEQ but I really like the vibe of the...
  24. bread

    Is there any way to ..

    Reduce the level of all amp block levels by say, 5db across the board in one easy step please ?
  25. bread

    Every Little Thing She Does is Magic - Help Needed

    There's a really "chewy" flanger/chorus going on in the verse of this song and I was wondering if anyone knew how to dial this in please ? I've tried the Electric Mistress Flanger with the chorus but it I can't get it close enough. Thanks in advance.
  26. bread

    AV Disasters and Rigging Disasters on Facebook

    Some of these are hilarious, go and have a look on Facebook at these groups if you haven't already. If you ever thought you were having a bad gig, you will feel a lot better once you've seen some of these.
  27. bread

    Soundcraft SI Impact Help Needed

    I have a Soundcraft SI Impact with the 32 channel stage box we use regularly, with on stage, in ear monitoring via Visi Listen. Even though the levels in the band are constant (our presets are levelled at rehearsals and, where we play through a Yamaha DXR/DXS PA system) we regularly lose the...
  28. bread

    How Many Amp (mA) Does the Axe Fx 3 Need

    Just wondering as we have very limited power on stage tomorrow and I need to work out if I can run all back line and lighting off 16A Thanks !
  29. bread

    Suhr Classic T Pickups Sound Dull

    I have a Sur Classic T and the pickups sound really bass heavy and low output. Has anyone else had this experience with the stock pickups and resolved it somehow ? I've adjusted the pickup heights and had the guitar set up by a professional luthier so its definitely the pickups that have this...
  30. bread

    Cathode Follower - It's Really Cool

    I had some time on my hands this morning, so I installed 20.01 and then decided to learn some advanced parameters of the Axe FX which I have always found a bit too technical for my understanding. I decided to start with the Cathode Follower parameters, but first, did a bit of googling to find...
  31. bread

    Wish Output Block Dedicated to In Ear Monitors

    Would be great to have an IEM output block with the Room and Air controls in so that I don't have to add an additional cab block. It would also allow for the same signal chain to be used instead of routing around the existing cab block etc. Having a reverb control in the output block would be...
  32. bread

    Preset Levelling Using Set Lists

    Is anyone using set lists to help level presets ? For example, move a crunch scene to a part of set list song (say, Intro) and a new crunch scene to the same song in the set list as another part (say, Intro 2). Then use the Level Preset function in Axe Edit to adjust the level of the new...
  33. bread

    Wish Fc12 - Pedal I/O Routings

    Be nice if the FC12 pedal inputs could be routed as send and returns
  34. bread

    Behringer X32 / X32R Latency with MX-Q Help

    Hi ! I recently bought an X32R with a S32 stage box (Midas Preamps) to use for sweaty pub gigs so I don't have to use the Soundcraft Impact SI on front of house. We have 6 members in our band and we all have in ear monitoring, using iPad to mix our personal monitoring from the stage. We have a...
  35. bread

    People Falling Into Your Pedal Board

    #1 Pub gigs eh ? It all started when this lady decided it would be a good idea to just buy bottles of Prosecco at the bar instead of individual glasses and waiting about 15 to 20 minutes to get served at the bar. Over she came... a middle aged lady dancing towards her friends who were at the...
  36. bread

    Proximity Frequency

    Does anyone use the proximity frequency on the cab block ? I've just been playing around with it and instead of leaving it at its 120Hz default, raised it to 140Hz - 160Hz with a proximity value of around 1. The difference is subtle (probably because I'm not changing it very much) but it...
  37. bread

    Fixed : 80s Style Chorus

    I've put a chorus block before the amp and selected the 80s Chorus type. When increasing mix, the volume reduced and at 100% there is no volume at all. Is this right ?
  38. bread

    Strymon Sunset

    Has anyone used a Strymon Sunset in front of the Axe FX and what are your experiences ? Thank you
  39. bread

    Preset Access with FC-12

    Is there a way I can heel-toe the two buttons on the FC12 so that 10 presets are immediately displayed, then select one preset and automatically return to my default layout ? Thanks in advance...
  40. bread

    Spillover Issue

    I am using a delay in a scene in one preset but if I change to another preset when the delay tails are tailing off from the previous one, I get a very noticeable "bump" in volume for one delay when the new preset is engaged. I'm sure this is to do with the spillover (configured as "both" on my...
  41. bread

    Bug - Axe Edit Modifiers ?

    I use a FAS expression pedal as a wah connected as FC12 Pedal 2 as a modifier. When i view in the Controllers->Modifiers menu in Axe Edit, it says it is in position 3, not 2. Could someone check please ?
  42. bread

    Wish Retain Output and Input EQ When Using "Reset Amp Block"

    Please could the input and output EQ settings be preserved when using the "Reset Amp Block" feature ? Mesa Mark series are dialled in using these EQ settings in particular and would be great if resetting the settings could be avoided Thanks !
  43. bread

    Wish Synth Block Fixes Please

    Can we have the synth block fixed so it doesn't chirp when using it please?
  44. bread

    "Your Love" by The Outfield - Harmoniser Help Needed

    Could someone shed some light on how to get this harmoniser sound in the first solo section on the song Your Love by The Outfield please ? I've seen some on-line demos and read some stuff on the internet, but my attempts sound like a fairground so I wondered if anyone could give me some tips...
  45. bread

    Control Switch Channel Toggling Problem?

    Hello and Happy New Year ! I'm setting up a filter block which will give me 2 different boosts depending on whether a button on the FC12 is using the tap or hold state. However, I can't seem to get the block to revert to Channel A when the button is disengaged. I want it to work like this ...
  46. bread

    No Audio Using Axe-Fx III with USB into a Mac with Scarlett 8i6

    Hello, I wonder if anyone could help me with this issue I'm having. I have my Axe FX III connected via USB to my Mac which runs Axe Edit no problem at all. I want to use the Axe Fx audio over the USB into my Scarlett so I can hear it through my monitors but, although I can see the meters move...
  47. bread

    Key Changes Using Layout

    Is it possible to use a layout dedicated to changing the key of a global pitch block for harmonies etc. So I can change layout hit "Key C" and then go back to my preset in my main layout and the Key of the pitch block is set to C for all of that preset please ? Or is there an easier way of...
  48. bread

    Loving the FAS Amp Models

    Not much is mentioned on here about the FAS amp in the Axe FX. I think they are amazing - if you want a mega clean sound that really springs out, try the FAS Class-A. The FAS Crunch is another belter.
  49. bread

    The Paradox of Guitar Tone

    I stumbled across this today I'm not sure if you've already seen it ? Anyway, here it's explained how to get a great big tone from your guitar using the master volume on the amp, how speaker compression kicks in, how it distorts, pick attack and power amp tube distortion all work together to...
  50. bread

    External Switches With Control Switch Properties

    Is it possible I can assign my external switch (connected to the FC12 via a TS cable) as a control switch ? Here is what I want to do .... Assign my external switch (a Bright Onion pedal) to a Filter Block on Channel A so that when engaged, I get a 3 or 4db boost to make up the loss in level...
  51. bread

    Chorus Hall Reverb

    Have you tried this reverb ? It's now my go to for just about all my presets because it sounds so good. I have mix about 12% and the rest stock. If you haven't tried it, give it a go.
  52. bread

    External Switch Help

    I'm trying to assign an external latching footswich (Bright Onion) to a filter block so it will act as a dedicated boost across all scenes. I've assigned the switch in Layout 9 as a Stand-In Switch (Effect Block - Filter in bypass mode) and included the block in the layout of my preset. My...
  53. bread

    WISH : Blocks Select on Toggle

    I'm not sure this is possible already but here goes ... I can assign an effect block (for example DELAY 1) to an FC switch to switch that effect on or off - that's no problem. However, what I would really like to do is in the FC12 config of Axe Edit 3 is to have a drop down to select which...
  54. bread

    Map Volume/Pan Level to OUT 1- 4 Controls

    I'm not sure if this can be done already, at least I haven't seen a way of doing this yet. Here is my current setup ... I have the Axe FX3 OUT 1 going to FOH, echo'd to OUT 2 (internally in the config) which goes to my rack mixer channel 1. The mixer outputs go into the stereo input of my IEMs...
  55. bread

    Weird Crackles and Pops on 12.09

    Hi Since upgrading to 12.09 I'm getting weird crackles and pops coming from my higher gain presets. Its especially noticeable on a single note and sounds as if its digital clipping coming from somewhere. 1. I've bypassed all blocks except the amp and cab bock - still happens 2. The outputs are...
  56. bread

    Focusrite Scarlett 8i6 SPDIF Help

    Hi I've connected my axe 3 to my scarlett interface but can't seem to get it to sync at 48khz anymore. I've set the AF3 as follows Input 1 Source: Analog Word Clock: SPDIF/AES IN SPDIF/AES: SPDIF SPIDFI/AES Out Source: Output One When I change from 44.1khz to 48khz on the focusrite control...
  57. bread

    Power Supply AC Line Frequency

    Hello ! I was wondering if we should ask to have the Power Supply AC Line Frequency moved from the Amp Block Power Supply setting to a global setting because of the way it interacts with the new noise gate in the input block ? I've played around with it and changed it for most of my amps from...
  58. bread

    Fat Solo Tones

    Hi I've searched the forums for advise on this subject but with new firmware coming out all the time I thought I would start a separate thread for it now that FW12 is here I normally use pitch, a bit of chorus, a long delay and an 800hz bump. What other tips are there for creating solo...
  59. bread

    "Walk This Way" ... Solo's?

    Hi I'm learning Walk This Way by RunDMC and Aerosmith but the single version solo's are completely different to the live version which is the one I've just spent ages learning. Does anyone know which studio version on an album is the one that is closest to the live version (link below) so I...
  60. bread

    Music Hall Reverb is So Cool !

    I've never used this reverb before but thought I would try it out with a low gain fender type preset. I have the mix quite high at 15% and everything else at the default values ... its amazing - anyone else use this ?
  61. bread

    Embarrassing Moments ..

    Thread dedicated to when you make an absolute nob of yourself. I was at the London Drum Show years ago with my son who was only about 13 at the time but a monster drummer doing his trinity guild grade 7 exams. We saw this guy playing in one of the booths and he was amazing so we got chatting...
  62. bread

    Cab Block Question - Stereo

    Hi I was wondering if someone could help clarify my cab block settings. I looked in the WiKi but didn't really find my answer, so I thought I would ask on here. I'm running stereo effects (chorus, delay and reverb) into the cab block (after the amp ofcourse), so I've set the cabs up (all 4 of...
  63. bread

    Compressor Block Problem ?

    Is it me or does the auto gain make up not work on the compressor block ? I need to crank the level to around 14db just to get unity gain when mix is 100%. On the Axe II this was really simple, choose a compressor, select Auto Gain makeup and adjust the settings. Now I need to re-do all my...
  64. bread

    Studio Compressor - Bug ?

    I had this on 100% mix on my Axe II and with gain makeup on it pulled the level back up to unity (or thereabouts) On the III this doesn't seem to be the case anymore and even with gain makeup on I need to really crank the levels to get the preset back to it's original level Is there something...
  65. bread

    Include Mini Display Label on Per Preset Override Selection

    Is it possible to include the Mini Display label when selecting a PP# from the PER-PRESET OVERRIDE menu selector so its a bit more intuitive than just showing the PP# ? It would be great if it could display something like PP#1 FLANGER or PP#2 DELAY 2 or PP#3 SCENE 8 etc. I'm lazy and have a...
  66. bread

    Effects Explained by Cats ...

  67. bread

    Wish Scene Search

    It would be great if I could search within scenes of presets in Axe Edit III. I would like all presets returned with my search criteria as BOLD for the search is in the preset name and NORMAL for if the search criteria appears within a scene of that preset. ... or colour would work to highlight...
  68. bread

    Implemented Preset Linked to Layout

    I've only had my III for a few days but I'm still scratching my head trying to figure out how to assign a layout to a preset. What I want is a standard layout where I have 5 scenes and 5 effects, plus preset up and down - this is Ok, I have this. Preset number 2 I want layout 2 so I have 10...
  69. bread

    Layout Question

    Hello I'm on day 2 with my Axe Fx 3 and programming up the presets with Axe Edit III. I have an FC12 foot controller and wondered if there was a way that I can change layout on the FC12 when I change preset without going into the master layout to select it. I've changed the setting in Axe Edit...
  70. bread

    In Ears for Input / Output 2

    Quick question please I'm going to run everything from the desk (stereo) into input 2 of the FX3 when it arrives so I can mix the guitar from out 1 and everything else from out 2 as a blend to my IEMs. I can ipad individual mixes so this isnt a problem for separate mixes Question is of the...
  71. bread

    Synth Block

    Is the synth block improved on the axe 3 please ? I find it sounds great on my XL+ but very difficult to control. Thanks in advance
  72. bread

    Two Tribes Help

    Hi I'm working on Two Tribes by Frankie Goes to Hollywood but cant seem to dial in the tone that's used in the song. Does anyone have any ideas please on amp, cab effects etc ? Thanks in advance :) Here's a clip
  73. bread

    Steve Farris Tone on Broken Wings

    Hi could someone please tell me what the effect is thats running through the distorted guitar tone on Broken Wings please ? It's a kind of modulated pitchy chorus ..... I've tried phaser, chorus and pitch (detune) but can't get anywhere near it. Any help much appreciated. Thanks in advance...
  74. bread

    Fractal Load Box Question - Bass Amp

    Our bass player has a Mesa Carbine 600 bass amp which he wants to use without the cab. He will run an XLR from the back of the cab clone to a mixer where it will be split to the FOH and his IEM. I've seen the spec on the Fractal Load Box but it only goes up to 100W (the Carbine is 600W). Could...
  75. bread

    AustinBuddy HiWatt DR103 Jumped Clean

    Holy cow ! If you have the AustinBuddy naked amps collection, give this one a whirl with a plex delay, rich hall reverb and studio compressor. Its absolutely amazing.
  76. bread

    Wish Level Control Generator in Axe Edit

    Is it possible to have a constant tone generator in Axe Edit which has a range of instrument level volumes to match (roughly) each guitar pickup type (passive hum bucker, passive single coil, active hum bucker, active single coil etc) ? This is so I can use this facility to match levels more...
  77. bread

    USA Pre Clean Level Problem

    For some strange reason, reducing the level on the USA Pre Clean doesn't seem to do anything. I'm not sure if its something weird about the preset or something odd going on with my Axe FX XL+. I've tried using Axe Edit and on the unit itself, it stays at the same volume from about -12 downwards...
  78. bread

    Weird Buzzing - Help Needed

    Hi, I've tried everything with this preset and for some weird reason, when playing there is this strange buzzing from the left speaker. It doesn't happen with any other preset I have - just this one. I've tried saving to another preset, bypassing the blocks, resetting the blocks etc etc and it...
  79. bread

    Two Tribes FGTH - Help Needed

    My band is doing Two Tribes by Frankie Goes to Hollywood and I need to get the preset sounding just or near to the original. I'm struggling with that "metallic" sound that sounds like it's layered on the guitar so wondered if anyone had any ideas. I've tried pitch, chorus and multi delay but...
  80. bread

    Amp block bypass modes

    I'm using two amp blocks routed in parallel. I have the top amp block "mute" and the bottom one "thru". Do I need to change the bottom amp block to "mute" to prevent dry signal going through the amp block ? Thanks in advance.
  81. bread

    Mark V Amp GEQ

    I'm gravitating to the 5 Band (Mark) EQ on just about all my amp blocks now. I've found it to work really well with the Brit 800 so I guess I'm moving away from authenticity to using what I prefer to hear. That's a good thing I think... Anyone else doing this and had similar results ?
  82. bread

    Dual Delay Live

    I'm using the Brit800 with a big studio reverb and a dual delay. I have the first delay line set at 375ms and the second at 750ms which is giving me the huge sound that I really like. I've never gone this big on delay before for live use and just wondered if anyone had tried this and what your...
  83. bread

    How to import new factory presets ?

    Hi Sorry for the stupid question but how do I import the new factory preset banks A, B and C into my XL+ banks D, E and F using axe edit? Thanks !
  84. bread

    GEQ Mark Setting

    I've been experimenting with the GEQ settings on the Brit 800 amp model and having great result using the "Mark" setting in the GEQ section. Has anyone else tried this ? Im find it very easy to dial in great tones on pretty much every amp I've used. The Brit 800 is a very bright sounding amp...
  85. bread

    Odd Sound - Like a Wah Coming On Randomly

    When I was using my Axe FX II XL+ with MCF101 III at reharsals last night, I came across this weird problem. After playing on the same scene for around 3 minutes, the sound would suddenly change as if the wah had come on in the heel down position. This also happened in another preset with the...
  86. bread

    Running Stereo to FOH

    I'm going to give Stereo a go on Friday but just before I do I thought I would check a few things to make sure I've got it set up correctly please. All my stereo effects (chorus 2290 delay and reverb) are after the cab block and I have them all set to stereo with a width of around 60%. I have...
  87. bread

    Axe FX XL+ with Mesa Mark V Experiences ?

    Hi Has anyone used an Axe FX XL+ with a Mesa Mark V ? If so could you please tell me if it works well in 4CM and how you are switch the channels ? I'm going to experiment with this with a Mini Amp Gizmo if I hear good things about it. In particular the noise levels - are they as good as the FX8...
  88. bread

    Tone Matching a PA

    Is it possible to tone match a cranked PA to simulate what a patch would sound like at gig levels? I guess this has been discussed before but I would be very interested if the Fletcher Munson characteristics could be simulated so that a patch can be EQ'd at bedroom levels ready for live...
  89. bread

    Mark IIC+ Amp Model Issues

    Hello ! Is anyone else having problems dialling in this amp model? No matter what I do it always sounds very "dead" and lifeless. I've tried various different cabs but although there are some minor improvements (like the TV Mix F131) it still sound pretty crap. All my other presets sound great...
  90. bread

    Axe Edit Preset Name Doesn't Update Properly ?

    I'm sure this has been mentioned before but I haven't seen it on the forums ... Anyway I'm using Quantum 6.0 on an Axe FX XL+ running 3.10 Axe Edit on a Mac with Sierra 10.12 If I copy an existing preset to another location using Axe Edit, save it and rename it, then save it again, the MFC101...
  91. bread

    Question : Tone Match to Cab Block

    Hello, sorry ... another question. Is it possible to export 2 TM blocks into a single cab block - one TM for X and the other one for Y ? This way I can use 2 tone match presets and switch them using scenes ? Alternatively, is there a way to convert a TM block to a cab block without using the...
  92. bread

    Help - Preset Causing Strange "Crackling" When Using 2 Amp Blocks

    I have 2 presets attached - one which has 2 amp blocks that creates a strange "crackling" noise and another that has one amp block which doesn't crackle. Does anyone know why this is the case as I've used 2 amp blocks before and not had a problem, it's just with this preset. I'm running Q5.0...
  93. bread

    Block Input Gain and Parallel Path

    I was wondering why only some blocks such as reverb and delay have an input gain control ? For example, if I have chorus in parallel, then I would adjust the amount of effect with the level control (100% mix). However, the overall volume increases as a result and because there is no input gain...
  94. bread

    FX LOOP Block Question

    I have an FX Loop block in series from my reverb to the output. My output 1 level is about twice the volume of my output 2 level so is this because the level on the FX Loop block is not high enough (0db) or because it is in series connected to the output and not in parallel with the reberb...
  95. bread

    Axe Edit - Changing Types of Delay Resets Ducking Parameters

    Is there any chance that when changing delay types in the delay block, the block could retain the ducking parameters please ? Thanks
  96. bread

    External Switching Per Scene ?

    Hi is it possible to set up the MFC101 to switch on or off the external switches per scene within a preset please ? Thanks
  97. bread

    Scene Changes - Anomoly

    Hi When changing scenes that use different amp blocks I'm getting a momentary noise when the new scene is engaged. It sounds like the wah comes on for a 10th of a second then goes back off again. Anyone else had this problem ? It doesn't happen switching scenes that use the same amp block...
  98. bread

    Boost for leads

    I'm currently using a null filter for a lead boost and it's around 8db in order to cut through. Is this about right ? Thanks
  99. bread

    So Far So Good - Week 4 With the Axe FX II XL+

    So far I've read a heap of stuff on here, read the manual (a lot) and watched the super videos from Axe FX Tutorials (thanks Chris - these were a big help in getting everything up and running). So far I think the Axe FX sounds amazing. I've had a G System, POD HD, Kemper and still own an FX8...
  100. bread

    Setting Up Volume and Wah

    Hi I've got everything set up properly now on my new Axe FX II and was wondering if anyone could tell me 1. How to set up a global volume pedal between the preamp and the power amp (delay tails remain) 2. How to set up the expression pedal 2 for a way I've read the WiKi and looked at some...
Back
Top Bottom