Search results for query: *

  1. Frischerl

    Help! I'm a newbie and my used FM3 sounds like trash

    Did you turn on AMP Modelling in the Setup Menue ?
  2. Frischerl

    (Clear, Sorry for confusion) Can an FM3 Run Straight in to PA speaker?

    Hi Mathhew, as already stated above, this is the exact setting I use @ home (off course with smaller active powered speakers), just when you want to add additional signals (keyborad / Vocals) a mixer or an Interface like a scarlet might make sense, have fun enjoying your FM3
  3. Frischerl

    Using FM3 with Microphones/DAW

    Like this one OTraki Midi USB Kabel Interface...
  4. Frischerl

    Using FM3 with Microphones/DAW

    Hi Jonny If you want to use midi with fm3 you have to get a midi to usb cable. There are some tutorials from cooper carter on how to Programm fm3 3 scene or block status changed in the Logic Pro timeline in a song, it takes some time to get used To it but you can automise almost everything
  5. Frischerl

    Using FM3 with Microphones/DAW

    Hi Jonny have just saw your quote, as GlennO answered I would use #4 but as I am not recording guitar and vocals once I have no need to do so. Hope you could already find setting for you that is working fine ? Best michael
  6. Frischerl

    FM3 Firmware Version 6.00 beta 2

    Thank you FAS i played today with the archeon, and after playing for about 30 min, i loaded the new beta, and it was way clearer in the low ends with the same settings, not thas has been an issue for me before but you guyS improve wiht every release, awesome work. Setlist works also like a...
  7. Frischerl

    LT Presets

    Have you loaded the cabs from LT ? Otherwise you have to pick your own cab, i suggest to load them
  8. Frischerl

    Help with - LOGIC sending MIDI patch change via USB

    i just spend some hours on that topic to automate changes on my fm3, you definitely need an midi over usb cable this will show up as some midi device not as fm3. So far preset and scene changes work fine, only copy and paste of the midi item and pasting it lead sometimes to unwanted behaviour.
  9. Frischerl

    New FM3 Day!

    Congrats, you will have an awesome time going through the presets, enjoy
  10. Frischerl

    most of the preset sound like i had guitar tone down to 0-4 value

    Ist that problem accuring all presets you use ? If yes it would be easier for the folks here to help if you share the preset or a sample of your sound, netherless i would suggest to check the basics like if amp modeling is turned on, i have to say that there is a difference when you listen to...
  11. Frischerl

    Noise Gate Help

    Here you go, starts @ 1:00 you are welcome.
  12. Frischerl

    Headphone amp needed?

    Same here, i see no value ad in adding a headphone amp, FM3 is capable to drive your headphones to reach "tinitus" level
  13. Frischerl

    Using FM3 in Europe. Power Cable?

    Amazon or google are your friends Swiss type power cable
  14. Frischerl

    Free Preset Pack - FW 5

    Awesome, love it, as always brilliant stuff, thank you Leon
  15. Frischerl

    Help me chose my PRS

    Hi Diego, congrats also from my side to your new beauty, i baught myself my custom mint and had some things to adjust as the former owner turned the action of the stings far too low so the strings where sitting on the pickups and so one ;). So i completely understand that you are so happy with...
  16. Frischerl

    New Fractal user…..

    G66 have stellar support even if it seems that you had a bad start, this will be quickly solved by their support team.
  17. Frischerl

    Another convert to Fractal

    Hi there warm welcome you will love your new peace of gear—.
  18. Frischerl

    First Time Fractal Customer

    Sounds more like a 1st world problem than an complaint to me :), i know what you mean Joe l
  19. Frischerl

    Output 1 headphones/monitor question

    Hi there, cheapest solution is to turn of the active monitors. otherwise add an interface like a scarlet you can plug in unbalanced or balanced you can control left and right and the headphone out individual. On the back you can connect your monitors but only with 6,3mm jack (This is not a...
  20. Frischerl

    Help FM3 won’t connect to Mac’s

    Thx greg for answering the question before i went back online 👍
  21. Frischerl

    Help FM3 won’t connect to Mac’s

    as both macs dont work and usb cable also ok, would go fo a factory reset of the fm3, and then support if thats not working
  22. Frischerl

    Drums….what do you guys use to make tracks

    hi there with cubase or logic pro you can get with not so much effort reasonable results (using midi drums) for logic ypu can also use sequencer patterns. I am using logic prox so i have no experiance with cubase but i just saw a video on yputube where a guy programmed midi drums for an easy...
  23. Frischerl

    Firmware 5.00 Question

    Factory presets are not affected with the upgrade from 4.1 to 5 beta, if you dont have any customized or tweaked presets nothing can go wron, otherwise backup the presets, this takes only a minute And you will be save
  24. Frischerl

    Fm3 Output 2 's Volume level knob issue

    wild guess copy out 1 to out 2 might solve his issue hmm that is kinda strange, i just read the manual it seems that out 2 is suppost to be cranked up to achieve unity gain and the volume adjustment is done on your amp. I saw in the pic that you have unity gain selected maybe change this one...
  25. Frischerl

    AFIII Livin' On a Fractal Prayer

    :tearsofjoy:
  26. Frischerl

    Which 2-Button External ("Stand-In") Switch Do You Recommend?

    Mosky dual switch price and value is fair Mosky website
  27. Frischerl

    Fm3 Output 2 's Volume level knob issue

    If you go straight from fm3 to your power amp you should use output 1, amp modeling turned of. See page 30 of manual if youre setup is guitar amp see page 31 of manual disable power amp modeling in the setup menue thenl Navigate to SETUP: I/O: Audio and change Output 2/Copy Output 1 to “ON”...
  28. Frischerl

    Alternate tunings, via the FM 3

    Half step works down like a charm with the Virtual Capo (Pitch Block).
  29. Frischerl

    Alternate tunings, via the FM 3

    you are so right, VC ist only up or downtuning all of the strings acordingly to the desired value, no individual tuning per string possible, but I assume neither on the AXFXII
  30. Frischerl

    Alternate tunings, via the FM 3

    Yes, use same as in AXFXII the Pitch block, inside you´ll find the "virtual Capo", adjust to taste (+, - , 1 equals a Semitone). Search in the forum the Fm3 capo is not able to run the same quality of algorythm as of the "big briother" but is still a good one
  31. Frischerl

    Is it possible to .....

    Hi Greg, you are really a Fractal Pro, I didnt know that this was possible to route that way, thumbs up for this. Best MIchael
  32. Frischerl

    Is it possible to .....

    Yes I am using FM3 as my interface which is directed to Logic Pro and I am reamping tracks from time to time so with this option I am able to add or remove any effect that I want, So USB conntected to Mac book in the DAW FM3 as audio source selected and there you go, for reamping there are some...
  33. Frischerl

    Is it possible to .....

    Dont know if that is with the fm 3 possible, but Another way to aproach this: how about Recording dry and reamping in your daw the track as you can experiment than with delay and reverb to your taste.
  34. Frischerl

    Seamless switching question

    You can also use control switches to boost gain like to go from clean to crunch then you will have no noticeable latency asign them to a footswitch and you are ready to go
  35. Frischerl

    FM3 via headphones and small/quiet ‘computer’ speakers

    like Iaxu stated, go an invest on really good headphone that produce a sound that you like, I am using the BD 770 work great for my needs. Still I play a lot of time using a pair of afordable JBL 305, they work also well with low volumes..
  36. Frischerl

    FM3+ Could this be a thing?

    hi guys first of all, no offence to any of you as this is a dicussion thread i just want to share my observation i do have reading the last 3 pages of different posts. my point is that fractal is already offering a wide range of units that cover already a lot of needs. I mean some of us have...
  37. Frischerl

    FM3 direct into cab for low level apartment playing?

    Or just use 1 or better 2 small active frfr monitor speakers to play with aceptable sound on room level. They will even deliver useful results to practice. As above stated there is only a small driver in the fm3 that is capable to fire headphones but not enough power to drive. Real speaker
  38. Frischerl

    Awoke to a GOOD knock on my door

    Have Fun with it
  39. Frischerl

    How to question with virtual capo

    select Vitrual Capo in pitch block and detune -1 for half step down E1-E6. -1 is equal to half step down
  40. Frischerl

    New to the Forum... my FM3 Rig

    Welcome to the forum, always good to have another player here to join forces and help each other out. Thats one of the things i like so much on the fractal gear and the community here is always helpful and supportiv.
  41. Frischerl

    I'm a bedroom player with the following goals, what gear would you recommend?

    Have no experience with plugins also, so I cannot comment on that. I think that you made a good invest, as you have bought a peace of gear that is constantly further developed by the fractal engineers. also you can dial in quit quick a well suited metal tone, or just use a preset created by one...
  42. Frischerl

    New! CronoEcho Delays for FM3

    Also from my side, a big thank you, great new stuff. really appreciate all, your hard work and development.
  43. Frischerl

    FM3 Firmware Version 5.00 beta 1

    Honestly i was also expecting an updated VC, but the feature set of updates is really a lot of improvement of an already top notch unit. I have owned a FXII & MC101, than an AX-8, sold that for the FM3 with no regrets. So that the FM3 might not get an further improved virtual capo in future...
  44. Frischerl

    FM3 Firmware Version 5.00 beta 1

    löik Same issue here, only Worn Tape ist shown up, for 2) same effect. Reloaded the Beta version 2nd time and also did a refresh on Fm3 Edit, no change, I am using Mac OS Monterey 12.1 mac book pro
  45. Frischerl

    FM3 Firmware Version 5.00 beta 1

    Thanks to all of the fractal specialists for a lot of improved an now options and stuff to work on and play around with, this is as always much appreciated. You guys rock 👏
  46. Frischerl

    Urgent Help: Output not working

    does the issue cover all of the presets? If yes than check global settings if there has been some substantial change happened that affects the output!. as unix guy stated the knobs out 1 out 2 are cranked up ? Have you had a chance to test if usb audio will hit the output also? like backing...
  47. Frischerl

    FM3 and 250ohms headphones

    Beyerdynamics DT 770 Pro. great sound, enough volume, i am using the 250 Ohm Version For me they work well Happy new year!
  48. Frischerl

    fx return to headphones?

    Why dont use the usb? fm3 is designed for that and can be used as audio interface ? Thats much easier then build routings in every preset. If you use phone plugs You have to route the input 2 to out 1 (as Greg stated above) to get the audio. I would go for gregs advice
  49. Frischerl

    fx return to headphones?

    Do you mean the audio coming from your laptop (usb)?
  50. Frischerl

    How do you get a good filter sound?

    Hope i got it right You could place a vol/pan block in the chain and the reverb and or delay in paralell to The signal chain after the looper and then straight to the output. This should work you would than provide a non delayed sound over the backing track
  51. Frischerl

    How do you get a good filter sound?

    That is true, so to be conrete for some presets, especially for those with a ton of gain i am using wah after drive and before amp in, looper comes after the cab section, but i have seen presets where the wah is placed for the drive block... for the clean settings i place the looper as stated...
  52. Frischerl

    How do you get a good filter sound?

    i go for the looper next to the input and loop the dry signal, but i am not a „looper“ guy building songs based on a dozen overdubs :cool:
  53. Frischerl

    What are you using for recording your music?

    Guitar- PRS Custom 24 & Tremonti Tuning- various drop tunings on the tremonti, otherwise e standard and eb DAW- Logic Pro X Computer- 2020 mac pro 16“ Audio interface - FM3 (used a scarlet 2i2 before) Monitors - JBL 305 Headphones - DT 770 250 Ohm
  54. Frischerl

    Boost Scene

    You can setup a Control switch and assign with momentary function to one of the three footswitches and engage either in the pream section an additional 3 db boost, or you can in crease the master volume about the desired db range. Just assign the digital switch to a desired footswitch. You can...
  55. Frischerl

    Training Videos

    Welcome to the fractal family, you might go an visit leon todds videos on youtube, he shares a lot of his knowledge to the community. Also on the g66 website (european distributor) you can find some artists that share videos of presets and how to tweak certain sounds. if you want to learn how to...
  56. Frischerl

    Rammstein and Machine Head presets?

    Rammstein AXII preset Hi, you might start with Fractool convert the above preset and tweak to your taste, as I did not find a free Rammstein preset for native FM3. The free machine head presets are much to old to make sense. Maybe there are some purchaseable ones out there also... There is a...
  57. Frischerl

    Just got my FM3 !

    that is soo true, only the toys are getting bigger and more expensive....:cool:
  58. Frischerl

    Question about FM3 edit

    It lets you set that (delay) block's mix using the global mix setting. See "Effects Mix" on page 90 in the FM3 manual.
  59. Frischerl

    Best headphone monitors

    Hi there, there is already a thread flying around about headphone monitors. if you use the search function you will find a lot of user feedback. Myself, I am using beyerdynamics dt770 with 250 Ohm, they are loud enough powered by the fm3 and surly will be also good for fm9. also you might take a...
  60. Frischerl

    FM3 Firmware Version 4.01

    I am happy with my FM3 as it is,. If a major update is on scedule, I am happy to have an release update as Fractal always improves their gear, love this.
  61. Frischerl

    Silly question

    there is some other thread flying around where admin staded that due to a loaded bad IR within a preset it can happen that the fm3 freezes.
  62. Frischerl

    Just got my FM3 !

    Hi an welcome to the Fractal family. Can only fully support what you stated, the Fractal products and the modeling and effects are outstanding and value for money is more than fair and you will get updates and patches during the lifecycle frequently as the device is further developed. So enjoy...
  63. Frischerl

    FM3 locking up.

    I recomend to go for a factory reset, upgrade to 4.01 software, reload the stock presets from scratch try again, if the problem is still in place, open a ticket @ support. the stated situation is definitely not normal.
  64. Frischerl

    Noise Gate Help

    hmm ok, so I am using it the same way, honestly i dont have 100% zero hum but it is noticeable more quiet than not using a gate, but i prefer to have sustain and live with a little bit of noice and turn my volume on the guitar down when not playing. I know that doesnt solve your issue. I believe...
  65. Frischerl

    Noise Gate Help

    Seems like you have a setup like Leon todd is showin in his vids ? Have you tried to check the Leon Todd, vids he shows the settings he is using there. Adjust threshold to taste, Attack time 1-2ms, holde time and release 10 ms if I have this values right in my mind ? please go to youtube and...
  66. Frischerl

    Questions About FM3

    can only add that I dont hear or feel any noticable latency at all.
  67. Frischerl

    Single Preset Problem

    no, I did not had this experiance, but I am by far not using a lot of the stock presets that come with the FM3. I would reload this special, single preset from the fractal website und store it new and retry...
  68. Frischerl

    Low volume outputting to studio monitors

    cross my fingers that might help 🤞
  69. Frischerl

    Low volume outputting to studio monitors

    have you set in the I/O menue all to unity gain? Seems to me that there might be a generall setting issue If that is present at all presets. the issues sounds quite strange as the fm3 works with the matrix well ?
  70. Frischerl

    Output 2 hum problem

    Maybe also try to connect to another ac circuit with headrush than fm3, i think i read that somewhere in the forum, somebody has solved the problem so.
  71. Frischerl

    USB Cable(s)

    I am using the FM3 with a Mac Book Pro 2019 USB-c to USB-B with several cable length and different manufacturers, no issues so far here. Also the use of a USB Hub like this with no issues at all
  72. Frischerl

    Sennheiser HD 650 - Too much impedance?

    Good advise greg, leveling presets is helping a lot :cool:
  73. Frischerl

    Sennheiser HD 650 - Too much impedance?

    Hi there i am using dt770 with 250 Ohm Impedance works with enough volume upside possible. so 50 Ohm more should work also fine.
  74. Frischerl

    Pitch block

    The search function in the forum is your friend: https://forum.fractalaudio.com/threads/any-word-on-the-fm3-getting-the-axe-iiis-pitch-block.172813/
  75. Frischerl

    Analog out stopped working

    Fractal will help you quickly
  76. Frischerl

    New User (Help!)

    Hi there, Monitors are always subject to your individual needs, and feeling about how you "hear" music. So hard to say that this is the go to pair. I am using JBL 305 and they work fine for me, also in terms of value for money they are good, Sure there are better ones out there. Its a decission...
  77. Frischerl

    Analog out stopped working

    Do the Led parameters work, or even in FM3 Edit can you see that the signal ist aproaching the output block ? have you tried also another preset, I mean does none of the presets provide sound at the output => if yes, => I would do a reset => if the proble still there => open a ticket @ fractal
  78. Frischerl

    Would the FM3 USB power this?

    Currently waiting for some functionality programmed by the fractal engineers. Could be some option to load presets from usb or anything else… there is also a Thread about this anywhere in the Forum..
  79. Frischerl

    Leave it on all day?

    since Fm3 is a native digital product, a permanent on, vs. switching off, should not affect sound in any direction. just my 2 cents on this, but it might affect your invoice from local electricity suplier, sligthly ;)
  80. Frischerl

    Convert Axe FX III Presets to FM3 presets

    You can use fractool https://wiki.fractalaudio.com/wiki/index.php?title=FracTool
  81. Frischerl

    FM3: G66 availability?

    I am in IT (europe) and we have massive Issues from various network and security suppliers due to lack of raw materials like silicium which is essential to produce any kind of semiconductors. 12+ weeks delivery on top due to that is meanwhile standard unfortunately..... so blaming Fractal is...
  82. Frischerl

    FM3 Fan issues after Cygnus

    No fan issues here with 4.0 beta1
  83. Frischerl

    Moving to FM3 from AX8, Worth it?

    Definetly worth it, i used to had the AXFXII, swaped to AX8 the big unit was offering too much options for me. I changed to the Fm3 months ago because: >+ improvment in terms of sound >+ Improvement in Editing much more convinent in the Editor as in the Ax8 >+ big colored display is a bonus...
  84. Frischerl

    Recommend me the best solution to run the FM3 through?

    Fair point, this video is for adjusting sound for home use. For recording and live use this will not be the right source off course. for,myself i also use 1 preset, differently in terms of adjusting to specific type of guitar, live use, home use & headphone. As im am not recording yet cannot say...
  85. Frischerl

    Recommend me the best solution to run the FM3 through?

    There is also a video in the forum from leon todd on how to tweak sound for headphone usage.
  86. Frischerl

    Riddle me this....

    Up, and down not possible due to low vertical grid availability 😂
  87. Frischerl

    What to do when it arrives?

    When you buy from G66 Europe than yes USB cable comes along, if US than a USB cable with a type „A“ on one side and type „B“ on the other side (printer usb cable) is needed. Dont buy a too cheap China usb cable it might give you a hard time.
  88. Frischerl

    Recommend me the best solution to run the FM3 through?

    Same here, get a pair of nearfield studio monitors and headphones that meet your taste in terms of sound. Had 4cm with ax8 and mini rectifier, was always way toooo loud for home use.
  89. Frischerl

    Fractal Audio - Amps

    Wouldnt it be a smart move to use the color option to mark the amps in your fm3 / edit? You would save much time as you dont have to keep an offline list up to date when amps, cabs are edited when software improves. there is already a thread alive here from some user who shared this, just use...
  90. Frischerl

    High Output Pickups and AMP Block Headroom Meter

    Ah ok thx for reply, cross fingers that this will work for you, rolling down the guitar volume cant be the final solution 🤞
  91. Frischerl

    High Output Pickups and AMP Block Headroom Meter

    And has it worked out With the trim? Or still same issue ?
  92. Frischerl

    High Output Pickups and AMP Block Headroom Meter

    You did the general setup routine As stated in the manual? stroke the strings hard and adjst the input Trim so that the red led only lights ups time by time? I am playing tremonti pickups and 85/15 no issue with both pu‘s with using fm3
  93. Frischerl

    New FM3 - Footswitch Problem?

    Seems that only some of the units are affected with this issue. Good that this forums is alive and folks are exchanging they’re experience here.
  94. Frischerl

    Help! Best way to use your headphones with fm3?

    I am using my headphones with 250 OHM and the driver within the FM3 powers this easily, so loud enough at least for my ears...
  95. Frischerl

    FM3 Firmware Version 3.03 beta 1

    This has been introduced earlier, you can name the fm3 to your taste
  96. Frischerl

    Cygnus and DSP limits

    The only one who can answer your question is Cliff, or someone from his devops team.
  97. Frischerl

    FM3 USB audio device won't connect

    no USB switches in the chain connected ?
  98. Frischerl

    FM3 Firmware Version 3.03 beta 1

    Thank you, FAS Team, have a great weekend
  99. Frischerl

    New FM3 - Any Issues to Watch For?

    Nope, unbox it, connect it, have fun,
  100. Frischerl

    swap/rearrange presets

    Dont think so, as workaround you could arange presets, perfom a backup and save it on your pc/mac. but this also takes some time to do. But maybe somone else in the forum has experiance with your demand ? In terms of upcomming sw updates, like Cygnus this would also implicate that you will have...
Back
Top Bottom