Search results for query: *

  1. martijne

    FM3 kind of ruined my Marshall

    So true all of this..
  2. martijne

    Presets NKP Presets Master thread (Infos - Links - Demos...)

    nice! Ordered your punk rock package - just what i need right now!
  3. martijne

    Using FM3 with Boss SY1

    Hello! Q1: depends whether you have your main tone stereo or mono. If its mono, then you could send Out 1 left to FOH,Out1 right to FRFR and use out2 / in 2 for the SY1. Or: hook up the SY1 before the main input 1?
  4. martijne

    Affordable Monitor for FM3?

    I had an Alto TX310 for a while, but I didn’t like it. Now they have a TS410 on the market (at least here in Europe), that’s a higher standard. I returned the TX310 and got a MF Elis/8 from g66. More expensive than what you want to spend, but an excellent speaker.
  5. martijne

    Using an external amp and amp block together

    I never thought of this, but I’d guess that you would put out2 and in2 block in parallel with the amp block and feed the in2 block into the cab block. Somewhat similar to the 4cm in the manual on page 38. But I don’t have any experience with this.
  6. martijne

    Mic'd amp into FM3?

    Might work, but why not use a clean amp model in the FM3 itself? You can put the amp/cab on the grid before the stereo effect, record directly both the dry and the amped signal via USB. Reamp if you want… But maybe you want your specific clean amp sound?
  7. martijne

    NUX NMP-2 Dual Footswitch A/B Pedal

    Haven’t tried this one, but looks pretty straightforward, so I guess it may work. But havent tried..
  8. martijne

    FM3 and FC6 question - effects only

    Recently, I started working with the Per Preset system. It enables you to mix ‘n’ match any combination of scenes, effect bypass, scene toggles, effect channel, control switches etc etc. And moreover, it is preset specific! I have 2-3 kitchen sink presets I mostly work with.. I changed the std...
  9. martijne

    FM3 —> FC6 crashes

    maybe post the layout so we can check it?
  10. martijne

    Wich crunch tone do you prefer for live use between those 3? (short mp3)

    2
  11. martijne

    Wish Pleeaaaaassseeee MIDI Clock out !

    +1
  12. martijne

    Joined the Fractal family!

    Welcome! FAS will make you a better player!
  13. martijne

    Do you use reverb on stage?

    Cool stuff!! Care to share more??
  14. martijne

    Do you use reverb on stage?

    Bit of reverb to wetten up, or some 5% analog delay. For leads I up the analog to 20% mix and for a huge chimey new wave post punk sound switch over to the memory man style with a dash of slow modulation for nice swirliness. On the AC15 model with a micro boost for extra bite.
  15. martijne

    Do you use reverb on stage?

    Interesting.. why the pitch follower?
  16. martijne

    Flight case SKB SC2111 for FM3 FC6 expression pedals and cables

    Not included..
  17. martijne

    Flight case SKB SC2111 for FM3 FC6 expression pedals and cables

    An awesome SKB case SC2111 for FM3 FC6, my bulky Boss FV-500H expression pedal and quite some cables. https://www.bax-shop.nl/pedaal-koffer/skb-1skb-sc2111-draagtas-voor-voetcontroller
  18. martijne

    Red Sound Elis8 FRFR Review and MF 10 Comparision

    Got me an active Elis.8 recently. Sheer awesomeness.
  19. martijne

    [solved] OMG9 Question

    Thank you. Yes OMG9 is a piece of genius! I already found the importance of the layout links. I guess this piece of info is key to understanding the view switching in Layout 8. I‘ll take a closer look at that. https://www.fractalaudio.com/downloads/manuals/FM3/FM3-OMG9-Manual.pdf page 4.
  20. martijne

    [solved] OMG9 Question

    I'm customizing the amazing OMG9 layout for my purposes, tossing over some effect positions and adding song/section/setlist stuff. I noticed that Layout 8 OMG9 quadruples up PRESETS - SCENES -EFFECTS over the four views. SCENES & HOLD SCENES always select view 2 and EFFECTS selects view 3 and...
  21. martijne

    How is everyone mounting the FM3 onto their pedalboards?

    Anyone managed to squeeze an FM3 with a Boss FV-500H on a Temple Audio Duo 17?
  22. martijne

    Do you still buy pedals?

    Yes SY200 here too. Sold all others
  23. martijne

    Sitting in the mix with a keyboard player

    Thanks a million to all of you guys! We’re mainly rehearsing for live shows and the keyboard player is not the most diva princess type (just a bit). I’ll check all your tone tips and yes, arranging also plays a big part. is this the video @lauke-lux ?
  24. martijne

    Sitting in the mix with a keyboard player

    Thank you Greg, So it is more about cutting where the keyboard player is than adding where he isn't? I understood from this forum that the brightness of Brit 800's is important for cutting through, that was why i was looking at the bright switch etc.
  25. martijne

    Sitting in the mix with a keyboard player

    Hello dear FAS friends, I was looking for some general ideas / directions to make my guitar sit in the mix. We are a five piece band with a not-too-loud drummer (lucky us!) a bass player who mostly uses a pick for a bright and snappy attack, some occasional chorus and OD, a keyboard player and...
  26. martijne

    Amplifying FM3 at home?

    Adam T5V monitors thru an X32 rack mixer.
  27. martijne

    pitch shift to Eb

    Same here!
  28. martijne

    Strymon Deco or other tape saturation type effects

    Maybe its rather a question of properly emulating these new effects with the blocks already available? And add it to the Mother thread above. Anyone can contribute and we will all benefit.
  29. martijne

    Strymon Deco or other tape saturation type effects

    Maybe some more are here https://forum.fractalaudio.com/threads/the-mother-of-all-effects-blocks-thread-multi-model-edition.177536/
  30. martijne

    Poll: How many people use screen protectors?

    Where to get good protectors? I’ve seen some FM3 with all plexiglass around them.
  31. martijne

    Free IRs: VOX AC30 6/TBX (clearer, more optimized for distortion)

    Thank you!
  32. martijne

    Eventide H90, FRACTAL WHERE ARE YOU???

    Very, very true…
  33. martijne

    External effects bypass from FM3 MIDI?

    yes expensive. Thomann’s home brand Harley Benton has this one: https://www.thomann.de/intl/harley_benton_fxl8_pro.htm
  34. martijne

    External effects bypass from FM3 MIDI?

    Boss ES5 and ES8?
  35. martijne

    How Do U Arrange Your Presets?

    I have my presets in bank A; and the factory presets in bank B-C-D.
  36. martijne

    Looper/MIDI Questions

    IIrc there is a loop quantize parameter (see block guide) and the III/FM9/FM3 sync to an external midi tempo (FM3 manual p. 85). try to play around with that to see if it does what you want.
  37. martijne

    Wish Send External controller via MIDI CC out

    Thnx! I’ll check out the device. This is another company with interesting midi gear https://midisolutions.com/products.htm. (I’m not affiliated in any sense). And a very happy 2023 to all of you!.
  38. martijne

    Wish Send External controller via MIDI CC out

    Very true. I am trying to integrate my FM3 with Roland MC707 groovebox and now also a Boss SY-200. In one preset, the expression pedal can do wah or delay level in the FM3 and in another some filter in the 707 or the SY. Cool huh?
  39. martijne

    Wish Send External controller via MIDI CC out

    Yes this is what I meant. Send out midi CC‘s for expression pedals and foot switches. Passing midi via midi thru is already possible indeed. Thanks for clarifying!
  40. martijne

    Wish Send External controller via MIDI CC out

    the FM3 can send a MIDI PC via Midi out on preset change to downstream devices. It can also send Scene and Control Switch MIDI payload. My wish is to also send out external controller as midi cc messages. Upstream external midi devices can control the FM3. So if a knob on my synth sends CC...
  41. martijne

    Wish Pleeaaaaassseeee MIDI Clock out !

    +1
  42. martijne

    Amazed how good my FM3 sounds through a ToneKing Gremlin with cab sims on

    Cool. I’m gonna give a try with my little solid state Vox Pathfinder 10 amp!
  43. martijne

    Is the Matrix Amplification Q12a outdated?

    Thnx for your insights!
  44. martijne

    Is the Matrix Amplification Q12a outdated?

    Merry Christmas dear Fractalites! I was pondering about these new cool compact lightweight ELIS.8 FRFR in stereo pairs :hearteyes: and i was reading up on FRFR cabs in general. Nowadays, the Matrix Q12a does not seem to be in anyone’s top 3 anymore. I got one second hand already some years...
  45. martijne

    Newbie: Help me get my FM3 sounding like the YouTube videos

    Hello Prakhar, Merry Christmas and welcome to the club. I’m also an amateur guitarist and the FM3 is just plain awesome. I presume your preset is identical to Leon’s as he is very generous in sharing. Some factors that come in play may include Leons fingers & technique Leons guitars might be...
  46. martijne

    Help with creating tones

    I’m no dialing in expert either. I mostly just pick a factory preset, add the effect block i like and off I go. Fractal makes it so easy!
  47. martijne

    Delay/ exp pedal help

    I havent tried, but maybe set the exp pedal to external 1 (a controller) and then link both the delay time and the volume block to external 1. See the controllers section in the manual. Good luck!
  48. martijne

    OMG9 + OMG15

    I'm just beginning to explore OMG9, but it is really smartly designed. I was just wondering if anyone has made adaptations to include Setlist Song Section functionalities?
  49. martijne

    FM3 Firmware Version 6.00 beta 2

    jawdroppingly fast.... Thank you!!
  50. martijne

    FIXED: FC Setlist/song menu not accessible on the FM3 unit?

    You're most welcome! Glad to be of any help.
  51. martijne

    FM3 Firmware Version 6.00 beta 1

    You are infinitely awesome! Thanks for all the work you put in!
  52. martijne

    FIXED: FC Setlist/song menu not accessible on the FM3 unit?

    Please check whether you can acces the FC Setlist/Songs menu on the unit itself (from Setup)? I can make songs setlists and sections in FM3 Edit, but cannot see them in the menu on the unit itself. Can you reproduce this?
  53. martijne

    FM3 Firmware Version 6.00 beta 1

    Please check whether you can acces the FC Setlist/Songs menu on the unit itself (from Setup)? I can make lists, songs and section in FM3-edit, but not yet on the unit itself? Can you reproduce?
  54. martijne

    FM3 Firmware Version 6.00 beta 1

    Now that is awesome bunch of updates improvements and what else!!
  55. martijne

    Fm3 + external fx unit

    People also seem to use polyphonic guitar synth with the FM3.
  56. martijne

    Fm3 + external fx unit

    I came from L6 HXFX. I think the FM3 is much better., drives are more natural , let alone delays and pitch sifters.
  57. martijne

    Killing Joke Love Like Blood and Eighties preset

    Thanks a lot for your help. The high pass filter on the cab block helps tame the Marshally fizz quite a bit and low cut is always good to tidy up the low end and make room for the bass player.. The 30ms pre delay in the chorus was already there, it sounds best in my ears with the Vintage Tape...
  58. martijne

    The Axe effect strikes again..

    Even mrs. expressed herself about professional tone. Can you imagine that??
  59. martijne

    Killing Joke Love Like Blood and Eighties preset

    Dear Fractalites, Our new wave cover band plays these two awesome KJ songs and I was looking for your help on dialing in a preset for my FM3. I found some info on KJ guitarist Geordie Walker's rig over here...
  60. martijne

    The Axe effect strikes again..

    Couldn’t put it better. It is monstrous :lol:
  61. martijne

    The Axe effect strikes again..

    My band mates after our first rehearsal with my new only roughly tweaked FM3: “your old setup sounded nice, but this is really awesome”…:D;)
  62. martijne

    Is there a way to move presets on the FM3 unit?

    Yes I meant banks A-D, not blocks.. Thnx!.
  63. martijne

    Is there a way to move presets on the FM3 unit?

    I agree - swapping from the panel would be very nice. As would setlists and song sections. You are not by chance beta testing 6.0?
  64. martijne

    Is there a way to move presets on the FM3 unit?

    True, but then you can take a preset from bank B-D and save anywhere in A. That was my thought..
  65. martijne

    Is there a way to move presets on the FM3 unit?

    I moved all the factory presets from block A-C to block B-D. Now I can save everything everywhere I want to. I made preset 1-10 some song presets, 11-20 chimy amps, 21-30 clean amps, 31-40 marshall style crunchy amps etc.
  66. martijne

    Tips for fine tuning a basic Fender style clean?

    Awesome vid. Thank you for posting
  67. martijne

    Wish Utilities>Send MIDI

    +1 +1 +1. And if we could also have midi start stop and continue messages with that. Its a use case for people hooking up the FM3 with drum computers grooveboxes and the like. Start and stop and continue are just different bytes than note on/off, pc and cc . No complicated sysex stuff...
  68. martijne

    Let's see those FM3 rigs!

    A great team! Two midi cables. The Roland MC707 send a midi clock to the FM3. The FM3 send midi to the MC707 to play different patches thru the scene midi block. The MC707 currently goes into Input2 and then to Out1 with my wet guitar signal. I will certainly second the wish for ”Utility/Send...
  69. martijne

    FS FS (EU/NL) several effect pedals (Boss, Strymon, Walrus)

    I’m a happy Fractalite again with my newly acquired FM3 (thank you G66). So I‘m ready to part with: A strymon Timeline €350 A Boss RV500 €300 A Boss ES8 effect switcher €550 A Walrus audio Jupiter v2 fuzz Local pickup in The Hague NL or add shipping costs.
  70. martijne

    Emulate a Bad Cat Black Cat on the AX8?

    Thank you, I was also looking at the tubes if this were possible. I will definitely give it a try. But I also found this thread, stating that the Black Cat probably has a more DC30 like topology and that the Hot Cat is a unique Bad Cat design. Lots of great info on Black Cat amps...
  71. martijne

    Emulate a Bad Cat Black Cat on the AX8?

    I haven‘t been gassing over amps for a long long time but now I’ve seen a couple of great vids of the Bad Cat Black Cat amp. It’s a vox style amp. Does anybody know if it is easily emulated on the trustworthy AX8. We do have the Hot Kitty, but the Hot Cat it is based on is a different kind of...
  72. martijne

    12 external controllers

    You can hook up a midi foot controller that sends the ccs for external 5 - 12. Or an iPad with a midi app. Or a daw.
  73. martijne

    All my AX8 Presets for FREE!

    Thank You!
  74. martijne

    Fractal AX8 with Line 6 Power cab 112

    Hi, welcome to the club! The AX8 still holds to its own, i love the form factor. I'd say you are asking about two different use cases. A powered cab is great for playing out live or for band rehearsals. I have an active Matrix Q12a. We have a loud drummer but I never even push it to 50%. I...
  75. martijne

    Home rig vs Live rig. How to deal with 2 systems

    There;s always FracTools for converting presets between platforms..
  76. martijne

    Thanks to Austin Buddy, I'm out of the rabbit hole.

    Yeah, more or less the same here!
  77. martijne

    FM3 Recording with Austin Buddy's presets

    I suppose you won't mind me posting an AX8 recording based on Austin Buddy's presets. A 1980ies post punk / dark wave style song about the pandemic and the vaccines. https://forum.fractalaudio.com/threads/austinbuddy-dream-rigs-1000-tonepack-for-ax8-available-now.145365/post-2016853
  78. martijne

    Legacy Presets MASTER THREAD - AustinBuddy DREAMRIGS 1000+TonePack for AX8 and Axe-FX Mark II/XL/XL+

    I recorded a new song over the weekend. I used amp and cab settings from the Dream Rigs in an existing guitar patch. The bass patch is straight out of Austin Buddy's 200+ bass pack. Man, do these patches sound majestic! The spatiality of the guitar, the punchiness of the bass. No way I could...
  79. martijne

    Legacy Presets MASTER THREAD - AustinBuddy DREAMRIGS 1000+TonePack for AX8 and Axe-FX Mark II/XL/XL+

    Dream Rigs Is an excellent buy! Great tones and lots to learn from.
  80. martijne

    Using Fractool to convert Axe-Fx presets over to the AX8

    Iirc not all XL+ blocks are present in the AX8. Multi tap delay etc. Some blocks have two instances in the XL+ and one in the AX8. And consider the difference in CPU processing power. Lots of info here: https://wiki.fractalaudio.com/wiki/index.php?title=Comparing_the_Axe-Fx_II,_AX8_and_FX8
  81. martijne

    FM3 3-button vs AX8 11-button, reflection after 6 months or so

    Thank you. Very interesting to hear your experiences.
  82. martijne

    Patch mode vs Scenes

    Why don’t you program foot switches 1-8 to access preset 1-8 in the current banks (manual p 35). And set up F1 with single preset/ bank (manual p.24). Then you can have tap and tuner and stuff on f2 and f3. Only when you stomp F1, f-2 and f3 will scroll banks.
  83. martijne

    Cab-Lab and AX8 question

    So I‘m looking at Cab Lab to use with my AX8. But I’m not sure I understand exactly how this would work. I can mix several IR’s and send the result directly to a scratch pad or user Cab and save them in the Ax8. but for live mode, I must use a 3rd audio interface and then? Use the FXL block in...
  84. martijne

    Using External Switch to Switch Between Scene 1 and 2

    Do you want to make the Axe switch channels on a real amp? I don't think it does that. it does not have relays. The FX8 does. You can however make a preset with different XY settings in the amp block in different scenes and use a pedal to switch between scenes. But there is no real amp...
  85. martijne

    FS Wood veneer for AX8

    too bad I’m in Europe.
  86. martijne

    Using an Axe-Fx III with my Fender Twin for effects?

    If you want multiple high quality effects, get an FX8! Designed to work with great tube amps. You can leave it connected to the Twin and use your III for recording/studio work..Some are available in the For Sale section 😊.
  87. martijne

    FS Wood veneer for AX8

    Shipping to where?
  88. martijne

    FS RAC12 For Sale

    Awesome with an Axe-FXII!
  89. martijne

    AX8 Midi & startup issue

    Hello, have you experienced this? Starting up the AX8 with a midi cable (on midi in) to an other device (MC707 here) makes it hang during startup sequence. With the cable disconnected from the other device it boots normally. Easy enough to work around, but I was wondering if this is normal...
  90. martijne

    FS AX8 for sale (uk) - £775 - SOLD

    Very happy. Great seller, kudos to you Bob!
  91. martijne

    AX8 new user

    Welcome to the club. Prepare to enjoy great tone! You can start playing by connecting the AX8 Out1 directly to your speakers. Connect USB to your Mac and launch AX8Edit to edit patches. Or use the knobs and display on the AX8 itself. If you also want to record the AX8 on your macbook, connect...
  92. martijne

    FS AX8 for sale (uk) - £775 - SOLD

    PMd you
  93. martijne

    AFIII I opened the gates of hell with my Axe-Fx ...

    preset?
  94. martijne

    FM3: G66 availability?

    You might be right, but is is good to keep track of the state of affairs. At a certain moment het shipment rate will go up. I’ve got an FX8 and a bid bad ugly 4x12 100watter for the time being.
  95. martijne

    FM3: G66 availability?

    Awesome!!! “Huge” as in “also for people on the waitlist since March 2020”?
  96. martijne

    Tickling the Red

    +1
  97. martijne

    Wish Synth block update?

    Yeah! I'd swap a monophonic synth block for a poly guitar to midi. Then just connect any midi synth. If Roland and JamOrigin can do it..
  98. martijne

    Wish Synth block update?

    Uhh - poor kitty... @bradlake, Now this is getting spooky.
  99. martijne

    Wish Synth block update?

    :tearsofjoy::tearsofjoy::tearsofjoy:. Yeah non-native typo. Chorfs (chorves?) are beyond translate.google.com's capabilities and beyond my 1668 page English dictionary which advertises itself as the complete guide to written and spoken English. This leaves me even more lost in translation...
  100. martijne

    Wish Synth block update?

    Yuk! and you want that in yer III??? We'd rather have some synth block upgrades..
Back
Top Bottom