Search results for query: *

  1. Kenny Burch

    Cab-Lab 4 Version 1.00.01 Release

    Thank you, for your explanation, and also to Rex for his. That is definitely something to consider regarding reflections from the floor, wall, or just adjacent speaker bleed through. However, I don't know, especially regarding a single speaker cab, if I have seen any explanation from the Fractal...
  2. Kenny Burch

    Cab-Lab 4 Version 1.00.01 Release

    Thanks, I appreciate you guy's comments on the Cab Lab 4 positioning. I guess I can't fathom how the radiated sound from a particular round guitar speaker would be different than any particular position on the top quarter section of the speaker like Cliff's Dyna Cab block allows, versus being...
  3. Kenny Burch

    Cab-Lab 4 Version 1.00.01 Release

    Can anyone tell me what the big advantage is in using Cab Lab 4 as opposed to what Cliff has already developed for us AXE FX 3 users with the release of the Dyna Cabs update in the cab block in recent months? I watched Cooper's introduction video and tutorial, and I just can't see what the big...
  4. Kenny Burch

    Axe-Fx Firmware Version 21.01

    That's how sound tracks for "B" rated Sci-Fi movies are made....I guess....o_O
  5. Kenny Burch

    Axe-Fx III Firmware Version 20.03 Release

    I just noticed, while trying out the Klone Drive, that the "tone" section and the "graphic equalizer" section, in "post" mode, of the block has no effect on any frequency band. Has anyone else experienced this? I did find that the graphic EQ does work when switched to "Pre" mode, but not the...
  6. Kenny Burch

    Axe-Fx III Cygnus Factory Preset Banks A, B, and C

    Great! Thanks for the reply. I will give that process a try later this afternoon.
  7. Kenny Burch

    Axe-Fx III Cygnus Factory Preset Banks A, B, and C

    Is there a way to download the new Factory Presets to my computer as individual .syx presets, in a list form, without having to download entire banks to my AXE FX III? I have the majority of my banks currently filled with different custom presets I use on different occasions and I don't want to...
  8. Kenny Burch

    Axe-Fx III Firmware Release Version 16.01 Beta 1 Public Beta

    Same here...LF RES Q does nothing, and I believe there was another on that page that was not working.
  9. Kenny Burch

    Axe-Fx III Firmware Release Version 14.00

    Just checking out Firmware 14.00 and found when turning up the cathode follower compression level to any level other than zero causes my FC 1 expression pedal to generate a squealing noise when pedal movement occurs. The pedal is only controlling a Volume block and Cab level. Anyone have any...
  10. Kenny Burch

    Axe-Fx III Firmware Release Version 12.08 Public Beta 4

    Thanks for the reply...Yes that makes sense that there were probably too many things going on that a lot the AXE's CPU power was being consumed. However, I don't know what would have been wrong with the preset I was on. It did not show more than 80% for the preset. I have never seen my screen on...
  11. Kenny Burch

    Axe-Fx III Firmware Release Version 12.08 Public Beta 4

    Updated to 12:08 Beta 4, and now my AXE FX III is rebooting and refreshing at a snail's pace... AXE Edit will not update changes so I "Refreshed after FW update" in settings and it has been reading block and cabinet names for over a half an hour now. After re-downloading and installing the...
  12. Kenny Burch

    Axe-Fx III Firmware Release Version 12.08 Public Beta 4

    Anyone know of any update available for AXE Edit for 12:08 Beta 4? AXE Edit 1.05.13 Beta 1, maybe?
  13. Kenny Burch

    Axe-Fx III Firmware Release Version 12.08 Public Beta Part Deux

    I think the VC is a definite improvement. However, I noticed that, when selected, the tracking mode of "Poly" does not turn on, (at least not in AXE-Edit). The mode stays in Mono Mode. Anyone know why?
  14. Kenny Burch

    Axe-Fx II - How long will it be supported?

    Since I have the AXE FX III and FC-12 now, I will be selling my AXE FX II XL and MFC-101. Didn't see a lot for sale online, was wanting to get some opinions as to what would be a fair price for both units sold together? I also plan to throw in a Gator, 2 space rack, Fastlink cable, some magnetic...
  15. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    OK, I guess my terminology is incorrect, so I guess I should scratch the word Current and just use the word Name or Target Name of the preset, as opposed to Destination Name. The FC-12 Manual under Mini Display Options for Preset Functions describes what I am looking for as: *** Name – Shows...
  16. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    Hello atquinn, as I have tried to explain to others on this thread, per your example, if I select P6, Allman Brothers and I the move over to the left and hit P2, Blues Fusion, P2's mini display will say Blues Fusion and the active ring for that preset will light up. P6's display will still say...
  17. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    If I hit another switch like preset 8 I would expect the Mini Display for that button to show the name of the preset for Preset 8. The Allman Brothers switch will still say Allman Brothers unless I toggle it. There is a lot of information there. I can virtually see 5 presets on the controller at...
  18. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    No, I want the Mini Display to show one of those names, (as an example), when I toggle the preset button, instead of P1 or P6 (as an example). No matter whether I toggle or don't toggle, I want the resulting preset to display that preset's name in the Mini Display just as it will show in the...
  19. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    Yes, you are correct this is how I have it set up.. I just don't want to see numbers when I stomp the preset button, I want to see names. If P1 toggles to P6, and P1 is SRV Blues, and P6 is Allman Brothers, then that is what I want the Mini Display to read when a particular preset is active.
  20. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    Chris, I know that, but I was talking about two different things in the previous set up. I was referring to Current Name of a preset and was explaining that the set up I had explained worked well for me except that it was displayed in numbers, [P1] / P6, [P2] / P7, etc., as the toggled...
  21. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    Well Chris I just wrote out a detailed reponse to you on my issue but this darn post timed out on me and I lost it all. So I will try to make this one brief... I have decided to reduce my bank size to 5 presets instead of 10 and increase # of Banks to 8 instead of 4. This way I can remove all...
  22. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    Hi Chris, my mistake on the example I gave above. The example above should have read, "I may want to see Presets 1,2,8,9,5, displayed in front of me in a given bank for a particular song line up". The bottom line is that I may want to be able to see any of the 10 presets in a bank lined up in...
  23. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    Well here's the deal. I am setting up my pedal for the fastest way to get to where I want to go without getting confused. My set up is having the bottom five buttons as scenes with buttons 3-5 toggling to scenes 5-8. Button 6, toggles between Bank 0 and 1. Top row first five buttons are Presets...
  24. Kenny Burch

    Video - FC-12 - Quick Look | Default Layouts | EZ Switch Editing

    I did not see it in your video but have you seen a way to toggle presets so the mini displays show the current preset name of the toggle rather than the choice of 'Destination Name" when toggling within a particular bank?
  25. Kenny Burch

    Classes The Complete Axe-Fx III Master Class with Cooper Carter - v3.0 AVAILABLE NOW!

    Does anyone know if if his online class accepts PayPal as a form of payment for access to the course? I did not see anywhere on his site where it tells what kind of payments are accepted.
  26. Kenny Burch

    Bug - screen frequency

    Yes, I confirm this. I happened to me a few weeks ago and I just never got around to reporting it. But yes it pops, locks up the unit , and one has to turn it off and reboot the machine to get it unlocked.
  27. Kenny Burch

    MFC-Edit Window Scaling on HiRes Windows 10

    I purchased and downloaded the latest version of MFC-Edit. The first issue right off the bat was that the program GUI and the text are all miniaturized on my screen. I cannot read it. My computer screen is a 40" ultra HD monitor operating in UHD super high resolution mode. My other Fractal Audio...
  28. Kenny Burch

    TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

    So, has anyone written a zipped .syx file to set up the parameters for the MFC-101 Mark III to operate the AXE FX III in the midi controller mode? Just like the file Markus Hohmann supplied for the AXE FX III Systemdata.syx on YouTube. His AXE FX III .syx file downloaded perfectly for the AXE FX...
  29. Kenny Burch

    Post Your Axe-Fx III Rigs Here!

    Well here is an AXE FX III set up you probably haven't seen... I still use my AXE FX II XL on the live gig, which is where it is set up right now along with my large and heavy power amp along with my EV speaker cabinet, until I explore all of the sound possibilities of my AXE FX III first before...
  30. Kenny Burch

    Making the MFC and Axe-Fx III work together?

    Thanks guys for the replies to my inquiry. As suggested, I may go ahead and just keep the AXE FX II XL for my shows but also bring the AXE FX III along to switch between them as I gradually rewrite all of my presets for the AXE FX III. I have so many presets to re-write and gigs coming up fast...
  31. Kenny Burch

    Making the MFC and Axe-Fx III work together?

    Hi guys...I too can no longer wait for the FC Controllers to come out because as with many, I have shows to do this month as well. I was reading the interesting posts regarding turning the MFC-101 into a regular Midi controller to control the AXE FX III. There seemed to be a lot of steps and...
  32. Kenny Burch

    Axe-Edit III 0.05.17 Public Beta

    Thank you...Reinstalled the USB Driver and it worked perfectly...
  33. Kenny Burch

    Axe-Edit III 0.05.17 Public Beta

    Just received my AXE FX III today. Wanted to try out the AXE EDIT III Public Beta." Downloaded and the AXE EDIT screen will not do anything. In the upper left hand corner, the red button is on and says "disconnected". The AXE is connected to the computer via USB but the AXE FX III apparently...
  34. Kenny Burch

    Axe-Fx III wait list: Let us know when you get notified...

    Well finally.... Waitlist Confirmation: January 30, 10:16 am. EST Purchase Invitation: May 18, 12:48 pm. EST Order Confirmation: May 18, 1:32 pm. EST Order Shipped: May 18, 1:52 pm. EST Hope the Foot Controllers are here soon... or at least some update information on them!
  35. Kenny Burch

    Axe-Fx III wait list: Let us know when you get notified...

    Well fellas, I was born in 1954, and I have lived through all of the eras of guitar and rock, etc., but I am still playing guitar strong as ever. So with that said, I think this thread needs to stay on track, and back to reporting invitation times. That is the focus here for us who do want an...
  36. Kenny Burch

    Mark, loved the sound of your new video, Separate Ways....with the AXE FX III... Where was the...

    Mark, loved the sound of your new video, Separate Ways....with the AXE FX III... Where was the keyboard player, or was that just a backing track of one?
  37. Kenny Burch

    Presenting... The Axe-Fx III

    So would you estimate around March 8, 2018 for release? Would like to get the most revised ETA.
Back
Top Bottom