Search results for query: *

  1. Perdikament

    Wish Amp Block FAT Switch Freq. Adj. Parameter

    Would love to have some deeper editing control over the FAT switch on the Amp Block. Even if it was just to move the center frequency of it. We have it for the Presence & Deep controls & can adjust the Bright switch.. FAT switch needs love too!
  2. Perdikament

    Using A Preamp/Boost Pedal

    Is anyone using an actual Preamp/Clean Boost pedal in their setup? I know we have several available to us, (FET, SDD) and I use them more than any of the other Drive Block pedals, as well as the Boost Switch in the Amp Block. Anyway, my question is: where is the best placement of an actual...
  3. Perdikament

    What y’all make of this?

    check out Factory 2 #687 & have a look at it in the graph.. ever seen anything like it?
  4. Perdikament

    Cab Block Tip / Possibly a Bug

    I’ve had a few channels on a few patches that just haven’t sounded right, out of phase.. but when I look they are all lined up.. so I was going through each cab one by one and I muted al of them & I was still getting a bit of a signal. Huh?? It was the Air parameter in the Cab Block.. it sends a...
  5. Perdikament

    Wish Control Over Diffusion On The Delays

    Maybe it’s me & my understanding of how the diffusion in the delay Block(s) works or is supposed to work, but a lot of the time I find myself left wishing I had both more control over the tone, time & panning but also wishing the fidelity of the diffusion was a little better, (more along the...
  6. Perdikament

    What to do when you can’t line up IRs?

    i was just working with a fewOwnhammer IR’s from the Mesa Oversized cab that I converted non MPC & there was too much lead in and I couldn’t shift over a regular IR far enough to get it to line up. Not that it’s a real big deal, just wondering though has anyone else run into this? It wasn’t...
  7. Perdikament

    Cab Block Cabs List

    Is there a list online somewhere that lists the names of all of the III’s Factory Cabs? It be kind of nice to peruse through in one spot & also would be helpful in determining what Cabs to load up in the User Slots to avoid doubling up on, for example ML Cabs from bought ML Cab packs such as...
  8. Perdikament

    Bludo PAB

    Is the Bludo PAB now the Bludo Lead 2? I was just converting some AFII patches to the III with FracTool but the III wouldn’t recognize the patch with the Bludo PAB Amp. So I’m assuming that it’s just been renamed to lead 2. It’s not a big deal, I’ll just dial in another patch fresh, but I’m just...
  9. Perdikament

    Bug? Wrecker Express & Ideal Preamp CF Comp

    I’m no expert when it comes to the inner workings to amps, I only have a general working knowledge. Anyway, I’m pretty sure the TrainWreck Express is not a CF Amp but one of the settings I’ll tweak from time to time on the non CF Amps is adding in the Preamp CF Compression.. I was just messing...
  10. Perdikament

    Will we see the Plexi 2204/JMP50w

    Wondering if the Axe II & AX8 will see that new model?
  11. Perdikament

    Scholz Classic

    For anyone who is a fan of these speakers, Ownhammer has a nice set of 4x12 IR’s in a Mesa Cab here: https://www.ownhammer.com/store/index.php?main_page=product_info&cPath=176&products_id=393
  12. Perdikament

    Kinda Cool Info Regarding Strings

    Just happened across this article amongst my daily internet readings, thought it’d be of interest... https://m.phys.org/news/2017-09-revolutionary-guitar-world.html
  13. Perdikament

    Regarding The Fuzz's In The Drive Block Tips.

    I've always tried to get a decent Fuzz tone out of some of the Fuzz's without much luck. The only one I ever have any decent results with is the Face Fuzz and of course the Oct Fuzz. The Bender Fuzz sometimes.. but none of them really give that real Fuzz goodness IMO. And I realize that's due to...
  14. Perdikament

    Here's a cool rather addictive patch

    I'm using the Friedman Small Box driven by the FET Preamp in Scene 1 for a wicked killer base tone, but the addictive part is the multi-delay plex detune followed by a Block 90 phaser running parrallel. i have a few scenes set up, i think 1-5, basically just turning on\off the plex and turning...
  15. Perdikament

    Need a little modifier help...

    I'm trying to set up a modifier tied to the Input Trim of the Amp Block so that Scenes 1-4 the Trim is Set to 0.100 and then Scenes 5-8 it's set to 0.475, but I can't get the modifier to work! I'm trying to tie it to Scene 1 & Scene 2 in the modifier menu, but it'll only do one or the other and...
  16. Perdikament

    Any Recommendations for D-Style Amps?

    Anyone have some good IR's they like for the D-Style amps? I have the Buddy's Botique Pack & the Celestion G12-65 Collection. Just wondering if there's anything else out there that I am unaware of.
  17. Perdikament

    Bludojai LD2

    This was one of my original favorite amps in the AxeFX & I've really kind of forgotten about it. Sometimes I wish there were Dates/FW info attached to the presets in Axe Edit just for reference. I now at least add the FW number at the end of all my patches. Anyway.. I'm assuming since you've...
  18. Perdikament

    A nice drive stack combo

    Here's a real nice thick and chewy yet still articulate two drive pedal combo that really works well for both chords/riffs & leads. I'm using on a very lightly overdriven amp (CA OD2). Shimmer into the Esoteric RCB Both Drives are Low 2.0 & 3.5 everything else is left alone except...
  19. Perdikament

    Wish Axe Edit Page Switching On AxeFX

    It would be super awesome if Axe Edit would switch each page within the blocks on the screen of the AxeFX. Especially now that the Motor Drive has meters attached within their respective pages. AE already switches between blocks but not within pages within blocks. I'm sure there are a lot of...
  20. Perdikament

    FW 7 & FAS Amp(s) Love

    Something that doesn't seem to get a whole lot of attention but I feel, especially now after FW 7, is just how good some of these FAS Amps are. I'm guilty myself of often overlooking them, but from time to time I always go back and end up creating a killer patch with one of them. Usually i...
  21. Perdikament

    Control Pedals Possibilities

    On a IIXL can I have the Boss FS6, (which is a 2 button control) to say have button A do Tap Tempo & B to turn on/off a OD, and have an expression pedal hooked up at the same time? *I'm pretty sure this is possible, just not sure if the one CTRL Input will respond to 2 or just one Button?*...
  22. Perdikament

    Is there a Bluetooth to USB adapter?

    Wondering if there is such a thing so I can ditch the cord between my Laptop and the AxeFX? This way I can use Axe Edit wireless. Is this possible/any suggestions? Or even a Wireless USB to USB.. Basically any way to use AXE Edit wireless...
  23. Perdikament

    Carol-Ann & Mr. Oboto

    For those who may be considering purchasing the, "Obot The Robot" cab pack, the 1x12 Carol-Ann Scholz Speaker/Cab IR's have something magical in there. It's similar to an EV12L, but there's definitely something sweet mixed in there. Almost as if it was sprinkled with some raw pure cane sugar. ;)...
  24. Perdikament

    [NOT A BUG] Dual Amp & x/y Editing in FW•5.03

    Using Dual amps into a Stereo UltaRes Cab i had Amp1 & Amp2 dialed in so I proceeded to add two more amps on each y-channel. Both y-channels were on the default '59 Bassguy. So I first switch Amp1 to the Hook•1a & BMT defaulted to 0•0•0 &, Level -60.0dB. -Fwiw I also have the Force FW to...
  25. Perdikament

    The Hook

    i just went from 4.01b to 5.00b and noticed a significant volume & gain increase between the two FW's. Fwiw... To get 5 to sound like 4 I just had to reduce Input Trim from 1.000 to 0.100 & reduce preamp bias from .120 to .100 And bring the Harmonics back to 0.
  26. Perdikament

    Fuchs Patch

    Here is a Fuchs Patch for anyone who is interested. I also threw in a Dumble, Lonestar & Cameron CCV on the X/Y's & Amp2. If ya turn down the amp volumes by -3dB each there is some nice dual amp combos as well. I originally created the patch using 2 IR's from the Zilla cab pack so if ya have it...
  27. Perdikament

    Wah...Wah...What The!??

    Ever have this happen to ya? I had just finished adjusting my monitors by lowering them a bit. Sit down, pick up my guitar, start playing & the tone is way different. I'm thinking at first, there is no freaking way it could make this much difference, everything sounds like shit. Ha, the Wah...
  28. Perdikament

    Getting a Helpful List of Deeper Parameters.

    What would be tremendously helpful is having an easy access reference guide of all the parameters in the AMP & CAB blocks broken down perhaps into categories. I've come to realize as I dig deeper & become more familiar with all the parameters that there are basically two categories of tone...
  29. Perdikament

    How do you have your foot controller configured?

    I just picked up a FCB 1010. I always said that I'd never own a piece of Behringer gear. But considering that my audio signal doesn't pass thru it, and it's a cheap temp solution till I have the clams to buy the real deal, I broke down and bought Behringer. Anyway, after a few hours of being...
  30. Perdikament

    Four Way Molten-Metal Patch

    **FW15b**Multi-Molten-Metal Patch. This Patch has 4 different Heads & 2 Cabs. *they are set up for one at a time, although you could combine them just make sure you lower the main output level on each amp first!!* Amp1(x) - Splawn Nitro Amp1(y) - Freidman HBE Amp2(x) - Engl Savage1 Amp2(y) -...
  31. Perdikament

    Any Suggestions On A Mesa Maverick?

    I used to have a Mesa Boogie Maverick 1x12 & it really was a super sweet & warm sounding amp. It's a 35w Class A, 2 channel amp. The clean channel was glorious, the drive channel was good, but not real high gain. One of the really cool things about that amp was it had an overall master...
Back
Top Bottom