Search results for query: *

  • Users: ynor
  • Order by date
  1. Y

    Speaker match

    I want to obtain a corrective IR that matches my Celestion Century Vintage (with extended frequency range) with my Greenback. The reason I want this is that I want my home cabinet with Century Vintage to sound "the same" as my live cab with Greenbacks by adding an IR when using the home cab...
  2. Y

    Routing for 4CM with alternative amp sim possible?

    I am looking into the possibility to switch in and out a real amp heads preamp using the 4 cable method. The scenario is whether it is possible to switch between these options in different presets with the same cabeling: Preset 1: Regular 4CM where the real amp heads preamp is used. FX is added...
  3. Y

    Help me reamp with a real amp head

    No I will not send the piezo signal to the amp. The first thing I will try is to set Input 1 to "Left only" and use a regular mag guitar, and Output 2 to Copy L>R. Then I think original mag level at input 1 will be maintained at Output 2, and I can record the DI signal into Pro Tools via SPDIF.
  4. Y

    Help me reamp with a real amp head

    Thank you for your help! I will check when I get back to the studio.
  5. Y

    Help me reamp with a real amp head

    I think I might have found an explanation of the difference in sound using the Axe-FX 2 as a DI compared to direct into amp head: I have Input 1 set at stereo (because I regulary use a mag/piezo system), and I believe that somewhat reduses the gain. How can I compensate? I will try to shunt in a...
  6. Y

    Help me reamp with a real amp head

    I do not have the Axe-FX at hand here right now to show a screen shot, but will try to give as much details as possible: I doubt there is an issue with the DAW settings. We're using Pro Tools HD|3 Accel with three different Avid interfaces, combining both analog and digital inputs and outputs. I...
  7. Y

    Help me reamp with a real amp head

    So to achieve unity gain to have output 2 send the exact same signal that is entered at input 1 (Axe-FX as a DI), I just place a wire from INPUT to FX Loop block in Axe Edit and set Out 2 knob to 100 %? I did try this, but it didn't sound as good as plugging the guitar straight into the amp...
  8. Y

    Help me reamp with a real amp head

    Please help me to route the signal and set the settings in the Axe-FX 2. We're starting to record our next album, and what I want to achieve is reamping with a real amp head. I have set up the usual AX2 reamping with SPDIF according to the instructions here...
  9. Y

    Switching from VHT 2/50/2 to 6505+ as power amp

    You could probably do a tone match by using a tone generator (pink noise) in the Axe-FX 2, using a load or a D.I out of the VHT and 6505+. That way you would match some of the tone characteristics of the 6505+ to the VHT at that specific volume, resulting in an IR. Dynamics will not be matched...
  10. Y

    Left Only VS Stereo input. Sounds different.

    I'm not 100% sure, but I think I've read somewhere that one must set input trim to 1.5 in the amp block when using stereo inputs to match the standard input trim of 1.0 when using mono input/left only. Can anyone confirm?
  11. Y

    PRS Custom 24 owners - need pup advice

    ...BTW, I used to have a C24 with 59/09. Those were completely different than the \m/. Didn't like the 59/09 though... I missed clarity and "character" in those. They were a bit sterile and uninspiring for me. That guitar had the regular rosewood fretboard and standard PRS tremolo.
  12. Y

    PRS Custom 24 owners - need pup advice

    Let us know what you decide. I have a simular guitar but with ebony fretboard. I have installed a bigger brass block in the Floyd Rose and I'm looking for a more organic and fuller sound than the \m/. I agree on your description of those pickups. I currently have a set of Illuminators in the...
  13. Y

    Tone matching power amps

    Thank you for your response! How about capturing the IR of the JCM800 power section and applying the inverse for leveling out the amp's coloration?
  14. Y

    Tone matching power amps

    I use a Fryette Power Station to drive the guitar cab. Power amp modeling in the Axe-FX 2 is on. However, I also have a JCM800 2205 in another rehearsal place that I would love to use as a second power amp. So I'm looking for a solution to make the JCM800 power section (Axe-FX to JCM800...
  15. Y

    Stereo input and input trim correction

    I'm going to set up all my preset with stereo inputs as I have started to use a guitar with piezo pickups in addition to the mags. So I change the input from "left only" to "stereo" and use left for mags and right for piezo. But I think I've read that input gain is redused when going from left...
  16. Y

    Axe-Fx II "Quantum" Rev 2.01 Public Beta Zwei

    I wish it was that simple, but the EF86 channel is a different circuit than the 12AX7 channel.
  17. Y

    Axe-Fx II "Quantum" Rev 2.01 Public Beta Zwei

    So the EF86 has been revised. Matchless DC30 EF86 channel soon perhaps? :innocent:
  18. Y

    How to get inverse IR of a tube power amp?

    Yes that's my intention
  19. Y

    How to get inverse IR of a tube power amp?

    Someone tried this?
  20. Y

    Axe-Fx II "Quantum" Rev 1.05 Firmware Release

    The evolution of perfection in new firmwares are fantastic :) But will the EF86 channel of the Matchless DC30 one day show up in a new firmware? Have been eagerly waiting for this with each firmware release. It's the only thing I miss.
  21. Y

    Need help with gain sounds, please!

    Thanks, Chris Sent fra min SM-G920F via Tapatalk
  22. Y

    Need help with gain sounds, please!

    I use Input 1 in stereo mode because I have Ghost piezo installed in one of my guitars. Passive mag signal from the humbuckers to tip, active piezo signal to ring. I then use left side routed to amp-cab blocks and right side to another route of blocks for piezo signal in the same preset. I...
  23. Y

    High quality stereo TRS guitar cable?

    Thank you for your suggestions :-) Will look into these!
  24. Y

    High quality stereo TRS guitar cable?

    No it sure won't. I'll split it in the back of the rack before entering the Axe with two mono jacks.
  25. Y

    High quality stereo TRS guitar cable?

    I'm looking for a high qualtiy stereo guitar cable with TRS in both ends. Will use it with my PRS with Ghost Piezo into the Axe-FX 2. I do belive that a good quality guitar cable sounds superior to lesser cables when dealing with high impedance signals, but not to the extent that I'm willing...
  26. Y

    Fryette Power Station tube power amp

    In contrast, I bought mine directly from Fryette. They shipped within 24h to Norway, and answered all my questions quickly. Sent fra min SM-G920F via Tapatalk
  27. Y

    Fryette Power Station tube power amp

    I bought one just to use as a power amp for the Axe-Fx II. Works excellent! I use it to power either a 1x12" with Celestion Century Vintage at home, or a 4x12" Marshall 1960 on stage + with added cab sims to FOH on gigs. The power station brings out more characteristics in the simulations than...
  28. Y

    LF resonance and HF resonance with tube power amp

    Anyone have any input about this?
  29. Y

    About Speaker LF Resonance

    When using an IR made with a tube power amp, should the Low Resonance and Hi Resonance be set to 0?
  30. Y

    LF resonance and HF resonance with tube power amp

    When using a FRFR tube power amp (I use a Fryette Power Station) through a convensional cab, should the LF and HF resonance settings in the speaker page in the amp block be set flat? Otherwise, there will be a double effect for LF and HF resonance: One from the amp sim speaker page, and one from...
  31. Y

    About the Tone Match block and applying eq curves

    I'm also curious about this. Could you point me to the other thread?
  32. Y

    How to get inverse IR of a tube power amp?

    I'm tired of waiting for the Fryette LXII, so I'm gonna try to flatten the response of the power section on my JVM410HJS to use it as a power amp with a 4x12" cab. So how do I make an inverse IR of the power section of the JVM? Will this work: 1) Use the "MIC+DI" technique: Split Out2L...
  33. Y

    Axe-Fx Norge

    Axe-fx II mkII, Tromsøværing her. Har spilt gitar i 28 av mine 34 år, så har hatt min del av rør-amper og div. Line6-rigger. Står igjen med Axe-fx og en JVM410HJS.
  34. Y

    Axe-fx 2 with FRFR tube power amp and LF resonance

    I'm waiting (im)patiently for Fryette to release their 1U FRFR power amp with built-in valulator, the LXII. The impedance response to tubes vs. SS argument seems plausible, at least to me. Will this mean that when using the Axe-fx 2 with an amp like the LXII, one should disable the LF and HF...
  35. Y

    Optimizing a FRFR cab?

    Thank you for your input, aziz :-) That last point makes completely sense.
  36. Y

    Optimizing a FRFR cab?

    So compensating with EQ to make it more neutral won't work?
  37. Y

    Optimizing a FRFR cab?

    I think it might also be possible to tune a self-built cab in another way: I actually have another 1936 Lead cab with Greenbacks. I could capture and save an IR of this cab. I could build a patch where one output goes to the power amp and 1936 Lead with Greenbacks without cab sim, and the other...
  38. Y

    Optimizing a FRFR cab?

    The reason I'm thinking of this, is that I have an empty Marshall 1936 2x12 laying around, and I'm thinking of putting FRFR speakers in it just to try. It would probably need some serious tuning due to the cabinet design... Sent fra min GT-I9505 via Tapatalk
  39. Y

    Optimizing a FRFR cab?

    Thanks for your input. As I don't have any studio gear at home for the time being, a simular approach could be to use the Axe-Fx as an interface, or even the input on my PC connected to a small mixer and a flat mic. Some kind of free spectrum analyser or other free software on the PC is probably...
  40. Y

    Optimizing a FRFR cab?

    To tune a lesser FRFR cab to a more or less completely flat respone, is it possible to tone match the cab (and saving this as a "compensating cab" for other patches) by sending white noise using synth block and micing the cab with a neutral mic, and have the synth block with white noise as...
  41. Y

    FOH and real amp and cab

    Ah, yes I see. Is there a way to link the controllers of amp1 and amp2 so I'd only need to make changes on one of those to adjust both? Sent fra min GT-I9505 via Tapatalk
  42. Y

    FOH and real amp and cab

    Yes, but I'd like amp sims on both outputs but only power sims and cab sims on the FOH as the other output would go to my amp which already has a power amp and cab.
  43. Y

    FOH and real amp and cab

    This wouldn't disable the power sims for only one of the outputs
  44. Y

    FOH and real amp and cab

    I suspected one would need two parallel amp blocks, one with power sims and cab on and one without power sims and cab. Would be great if a new FW release could have individual power sims on/off and cab sims on/off for each of the Out 1 and Out 2 in the global menu! It would simplify the patches...
  45. Y

    FOH and real amp and cab

    Is there a way to send Out 1 to FOH with power sims on and cabs on, and Out 2 without power sims and no cab to the fx return of a real amp with cab without having to use two parallell paths in the grid to save CPU usage and to simplify?
  46. Y

    Rebuild power section of JCM800 to FRFR?

    ...and probably the most important reason: The looks of a Marshall stack is unbeatable! I'm not a fan of racks. But I wouldn't fake it and put it empty on top of the cab just for looks ;) I might eventually use it live...
  47. Y

    Rebuild power section of JCM800 to FRFR?

    The 2205 has an unbuffered FX-loop, and I did try it but didn't sound good due to it lacking service. I did try it on the Marshall AFD100, which has a simular power section. It did sound amazingly good on Marshall type amps, but not so much on many other amps which is the reason I'm looking for...
  48. Y

    Rebuild power section of JCM800 to FRFR?

    I wouldn't dare to sell the old Marshall, as it was a gift from my parents :-) Yes, I'm planning on getting a Matrix for our rehearsal studio, but I need yet another power amp at home and could use this old Marshall for that. I though the Atomic Monoblocks were well suited as a FRFR power amp?
  49. Y

    Rebuild power section of JCM800 to FRFR?

    I have an old Marshall JCM800 2205 that's been gathering dust for 10 years, and I fired it up last night to try it as a power amp on my Axe-FX II. Clearly the old Marshall needs a complete overhaul as it sounded really bad, so I got to thinking it would be nice if I could modify the power...
  50. Y

    Klon Capture IR of Most Common Clean Boost Settings

    I just sold my Klon to finance a Axe-FX II, and shipped away the Klon before I got the Axe-FX and the opportunity to make an IR. I really miss a Klon drive in the Axe-FX. If you were to capture another IR of the Klon, could you also add an IR with the Drive at 2 o'clock, tone at 11.30 and Output...
  51. Y

    Matchless DC30

    Thank you! Now I also discovered the Axe-FX II Wiki to bookmark and do some bed time reading :)
  52. Y

    Matchless DC30

    I just got a second hand mkII a few days ago, and I'm really enjoying it! It's been at least 10 years since I ran digital the last time (used POD back then), and now I'm back to digital mainly for a variety of sounds to play with at home as I leave my tube amps in our rehersal studio. Now, I...
Back
Top Bottom