Search results for query: *

  1. S

    MIDI switching CC on/off question

    You can't easily do it with CC only with the Eureka chip. I've been very disappointed with that chip's limitations. It can be done easily with the stock FCB & with the Uno chip. Another way to do it is with scenes and that can be handled by the Eureka.
  2. S

    Axe FX Volumes for live use?

    This issue is similar whether you use a modeler or traditional guitar amp & pedals. The ONLY real way to do it is at near gig volume with the band. Live, the phrase "less is more" usually applies. The more gain, delay, modulation, etc etc etc you add, the less your sound will cut through the...
  3. S

    How to display Preset Numbers Greater than 1-9 correctly on FCB1010

    As far as I know, that's not possible with the stock FCB or Uno chips. The only way I know it can be done is by using the EurekaProm chip in IO mode where all display LED segments are addressable BUT then the FCB pedal basically does nothing but send a single CC/Value per button/controller and...
  4. S

    Let’s see those Les Pauls!

    Latest additions are two cheapie Fireflys that , after a bunch of work, play and sound great.
  5. S

    EurekaProm 3.2 Tuner Issue

    Turns out the problem was caused by the Axe/FX II I/O MIDI SEND REALTIME SYSEX etting was set to NONE. Setting it to ALL or TUNER restored the function at the pedal. Not sure how it got changed because I was not familiar with the setting. Still trying to chase down another EP chip issue. In...
  6. S

    Ampeg amps for guitar?

    I had a V4 from the mid 70s until about '99. The one I had was somewhat unreliable and acted like it had a cold solder joint somewhere but no one I brought it to was ever able to find it. It only acted up when played at lower volumes. When I finally decided to move on from it I took it to a Sam...
  7. S

    EurekaProm 3.2 Tuner Issue

    I just got a EurekaProm 3.2 for ,y Axe/Fx II and 2nd FBC1010 (I've been using another with the Uno chip for years). The 3.2 chip has a new feature that reflects the Axe's tuner onto the FCB display. The display will show the note and next to it on the left, a + for sharp, - for flat, or blank...
  8. S

    Direct to FOH Rig with IEM and vocals?

    Did a gig once where the sound was done using a QSC Touchmix Compatible mixer. Soundguy had us d/l the Touchmix app and then connect our phones to his router at the gig. We were all able to adjust our own monitor mix onstage from our phones. It was very cool!
  9. S

    FCB 1010 programming

    Each of the switches on the stock FCB1010 can be programmed to send out one or more MIDI events. The events may be a combination of patch changes, Continuous Controller (CC) values, and/or notes. So, yes you should be able to do what you want. I don't know if your device wants the same MIDI...
  10. S

    Need a patch that cuts through the mix

    My $0.02... I've always found that less (fx & distortion) is more live, especially if there are other guitars & keys playing. To my ears, most of the stock patches were crafted 1) to show what the Axe/Fx could do and 2) to grab the player's ear when demo'ing solo. They sound great when noodling...
  11. S

    Axe-Fx II "Ares" Rev 2.00 Firmware Release

    What version of Axe-Edit is required with Ares 2.00 on the MkII?
  12. S

    Wireless?

    Xvive U2
  13. S

    Making a Humbuster Cable - 1 or 2 Conductor Cable Required?

    I made a couple of HB cables today and it worked out well. I was getting some hum and the new cables significantly reduced it.
  14. S

    Making a Humbuster Cable - 1 or 2 Conductor Cable Required?

    Yes but what would be the difference between that and this: Wouldn't they be exactly the same to any device sensing from the TRS end? The R & S from the TRS end are connected to the S at the TS end in both, right? What purpose would the extra wire serve?
  15. S

    Making a Humbuster Cable - 1 or 2 Conductor Cable Required?

    That doesn't sound right to me. I believe balanced cables are designed to reject noise picked up by the cable itself along its length. Each conductor as well as the shield is a discreet path, none are shorted together. One conductor carries the signal, one carries nothing. Any noise picked up...
  16. S

    Making a Humbuster Cable - 1 or 2 Conductor Cable Required?

    Pardon me if this question has been answered somewhere in this forum but my searches didn't find what I'm looking for. I've seen the Wiki image on this topic and also comments saying all that's needed is to short the R&S on the TRS plug connected to the Axe/Fx 1/4" outputs. Can I simply put...
  17. S

    "Digital modelers just don't cut through"

    IMHO, it's usually a case of not setting up patches wisely for live play. LESS IS MORE/MORE IS LESS live. The more gain/distortion & effects one uses, the less the sound will cut through. The same issue can apply to anyone with a large analog pedalboard too. A lot of the stock presets in the...
  18. S

    Behringer FCB 1010 Not resetting!!! Help PLEASE!!!

    I haven't used that chip myself but have read a lot of good thing about it. Lots of info here: https://www.eurekasound.com/eurekaprom
  19. S

    Can't Get Roland FC-200 To Select Axe/Fx II @128-155

    FYI, I have written a MIDIDINGS Python script for my Raspberry Pi 3 to translate CC events to PC (program & bank change) events allowing me to directly access or scroll through all Ace/Fx II patches from one FCB1010 bank (no Uno features required). One pedal sends CC 121 events with values 0-127...
  20. S

    Can't Get Roland FC-200 To Select Axe/Fx II @128-155

    Thanks. Yeah, that's how it seemed to me too. Odd that any MIDI controller would be designed that way but I guess Roland didn't care if it worked with other brand gear. I imagine the FC-300 addressed this issue. Oh well, no biggie, it was still a great score for $0 and very usable. I like the...
  21. S

    Can't Get Roland FC-200 To Select Axe/Fx II @128-155

    I recently got a Roland FC-200 for free and have been playing around with it to compare with my FCB1010/Uno. I consider myself to have a pretty decent understanding of MIDI, having coded a DOS program in C to edit patches on a Casio CZ101 long ago, lol. I later gave the source to a French guy...
  22. S

    Studio Monitors or Headrush-108 for my Axe-Fx II XL+? Confused, please help!

    As a practical matter, most studio monitors are not designed to be transported. In fact they rarely even have grilles to protect the driver(s).
  23. S

    Problem with Behringer FCB1010 connected to Axe-Fx II

    You really need to know what MIDI msgs are being sent. If you use WIndows, download MIDIOX. It's old but will still work under Win 10. Use it to display the MIDi msgs the FCB is sending and then look up what they are set to do in your Axe/Fx II. h
  24. S

    What amp, if did not have the Axe Fx III?

    Too difficult to expect all the tones I want from an amp. I don't even do that in that Axe II. I would get a vintage Vibrolux and pedalboard.
  25. S

    Anyone using an FCB1010 w/EurekaProm 3.2?

    I've been using an FCB1010 w/Uno for years. Recently I picked up a 2nd FCB for free and have been thinking of getting a Eureka chip for it. I've been reading some disturbing reports in their forum though about CC pedal (wah/vol, etc) latency in 3.2 that makes it pretty near unusable. Just...
  26. S

    Using the Harmonizer / Queen project

    Read up on using custom-defined harmonies. I found it easier than trying to find pre-defined scales that worked. I created a couple of harmony definitions that I could switch between as needed (for verses of Hotel California). It's not hard. For each of 12 notes, you specify a + or - offset. You...
  27. S

    Guitar Opinions $400 to $600 Range

    Check out the PRS SE series.
  28. S

    Best $20....

    Who else remembers using pitch pipes? 🙃
  29. S

    Axe-Fx II "Ares" Rev 1.03 Firmware Release

    I used to see people here rave endlessly about improvements after updates. IMHO, my II has always sounded great and the updates didn't really change much of what I use. I would not focus on the fact that there will be no more updates. The II is so deep and well-done you won't need them. You...
  30. S

    What are your opinions on running a sim cab into a real cab?

    I have a small tube amp through which the Axe/Fx II sounds best when cab sims are engaged. Try it both ways and let your ears help you decide.
  31. S

    Good time or terrible time to buy Axe-Fx II?

    My Axe/FX II does way more than I use. I won't be getting a III anytime soon. That said, if it's for live use more than studio I'd wait as long as possible for an update on the AX8. Dealing with rack gear and MIDI pedals live kinda sucks. It's a time sink with more points of failure than one...
  32. S

    Footswitch for looper

    I came into a 2nd stock FCB an was thinking of adding the Eureka but the lack of an editor really puts me off.
  33. S

    Smallest Rack Case?

    I use a 3U Odyssey rack bag but the wooden rack box is too big to lug on a plane, I'll look at the Gator GRB-2U, thanks.
  34. S

    Footswitch for looper

    Yeah, I forgot it is. There are a couple of other editors out there though. Here's one from the FCB1010 Yahoo Group.
  35. S

    Smallest Rack Case?

    Have a fly gig coming up and want to carry the Fx II onto the plane. What's the smallest, lightest case I can get for it?
  36. S

    Axe-Fx II in Action: Yes - Live at the Apollo

    Very cool! I've been a YES fan since the very early 70s and have seen them live many times, but never w/Rabin. I'm also a big fan of King Crimson. Check out the FAS and Kemper devices onstage with them in this video: If I'm not mistaken at 2:10 you see Fripp using 2 Axe/Fx II units and...
  37. S

    Footswitch for looper

    You will be hard-pressed to find a better controller for the $ than the FCB1010. I have used one for years with a number of devices and highly recommend it. Be aware though that the manual is translated-German gibberish and any pedal configuration editing should be done with a s/w editor. I use...
  38. S

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    The Walken Dude? Wait, I think I'm mixing SK adaptations.... :)
  39. S

    How to activate tuner from MIDI Controller FCB1010?

    Each button can be set to do many things simultaneously: - up to 5 MIDI Program changes - up to 2 MIDI CC msgs - 1 MIDI Note on/off msg - Open/close Switch 1 - Open/close Switch 2 - Define value for Exp pedal A and /or B or disable them If all you want to do is send CC values, you need to...
  40. S

    How to activate tuner from MIDI Controller FCB1010?

    I believe by default, the Tuner is linked to CC15. Hi Conley, fellow TOOPer! :-D
  41. S

    Best DAW?

    FYI, Cakewalk/Sonar (Windows) was picked up from Roland by Bandlab and is now free. It is also being updated/maintained again. Development manager Noel Borthwick transitioned with the acquisition so there is some development/bug fix continuity. I got a chance to meet and speak with Noel last...
  42. S

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Looking forward to hearing it even though I love the way it sounds now...thanks, Cliff!
  43. S

    FCB1010 Up Down on XL+

    Neither the stock FCB nor FBC w/Uno has an "increment" function. You will need to put a MIDI PROGRAM change msg with a preset number in each patch. For example, if you aren't using Uno "STOMPBOX" mode, you have 10 buttons in each of 19 banks. You could do something like this: Bank 0 Button 1...
  44. S

    Behringer FCB1010 - setup question - (somewhat advanced)

    You actually have access to 19 BANKS of presets. Since the Uno chip STOMPBOX mode keeps one row static, you have 19*5=95 presets to work with. I don't think expansion is easily possible with the stock or Uno-enhanced FCB. I would also recommend using an Editor/Librarian so you can quickly load...
  45. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Once I develop it a little more, I'll narrate a screen recording and send it to you.
  46. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Yeah, I suppose it's a bit too far from the core function of FP. I've got a working poc demo coded in Python on an r-pi3. Shouldn't take much to get it usable.
  47. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Here's a feature request that would be "gold" for me, something I've been trying to figure out how to do for a while: I would love to have a Fracpad mode that displays what my foot controller buttons do for each MIDI PC msg received by Fracpad. Now I realize that Fracpad has no direct way to...
  48. S

    Fractal Audio AMP models: Hipower (Hiwatt DR103)

    Yes, I have a TS drive as well as a compressor block set to add a bit of gain. I also have an amp X/Y setup so that X is clean but with a dynamic, crunchy edge if pushed like with the compressor and the Y is OD'd in the amp block. So, between the vol on the guitar, compressor, TS, Comp blocks...
  49. S

    Fractal Audio AMP models: Hipower (Hiwatt DR103)

    Not being much of a high gain guy, I've been happily using Fender models on my Axe/Fx II for the last couple of years and really haven't explored much beyond those until recently. I'd been listening to Live at Leeds and as I happened to have an SG w/P90s, I thought I'd dial up a patch using the...
  50. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Hi Al, What's different from the previous version? IOW, why should I upgrade if I I have the previous version for the Axe/Fx II and don't plan to get a III? I looked at the video and it the differences and/or new features weren't obvious.
  51. S

    Stock FCB1010 - What more could you want?

    With stock FCB chip, you can only have one LED on at a time and it can't be toggled on/off. You must press another switch which will then light the LED for that switch. That's fine if you mainly use patch and scene changes but if you like to use the FCB to control FX blocks like you would on a...
  52. S

    No, but I really never pursued the issue. I don't really use the old S5 device anyway. I...

    No, but I really never pursued the issue. I don't really use the old S5 device anyway. I mostly use an even older Tab2 running Cynaogenmod and so far Fracpad has worked well for me on it.
  53. S

    Xvive U2 - any recommendations?

    My friend has his for almost 2 years now and loves it. I've had mine about 6 months and have done a few gigs with it without issues. Amazon had a flash sale a while back and I picked up a 2nd set for 1/2 retail. I use the 2nd transmitter in another guitar (only 1 switched on at a time). The...
  54. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    OK, so this is just a CC that Fracpad sends when the song is chosen. Got it, thanks.
  55. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Thanks but I'm still not understanding what CC#/CC$ would be used for. Would you please give an example.
  56. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Thanks, Al. Is there an explanation of the set list feature anywhere? If not, I have a few questions and comments: what are the CC# and CC$ columns? There seem to be 2 setlist modes: edit and monitor - right? MIDI CC values can only move forward thru the list not backwards? Is there a way to...
  57. S

    Axe/FX II vs. Headrush - in my studio

    A good friend left his Headrush pedal with me overnight and I got to spend more time with it than I did at NAMM and also put it head-to-head (with no rush :-D ) with my Axe II. I found the models I listened to too bright before EQ. My go-to Axe model model is a Vibrolux with a 1-12 cab. On the...
  58. S

    [Solved] FCB-to-AXE/FX II MIDI Failure During Gig

    Found the my 7-to-5 MIDI pigtail had failed. The cable I used had very poor quality wire that tended to break inside the insulation with very little stress. That doesn't explain the switching problem when I wasn't using it and powered the FCB via the AC cord. Oh well, have not been able to...
  59. S

    [Solved] FCB-to-AXE/FX II MIDI Failure During Gig

    Had my 1st AXE/FX II screw-up at a gig this weekend. We did a 2-night stand at a venue in Nevada and had MIDI switching issues. I run an FCB1010 and phantom power it from the Axe/FX using an appropriate power supply plugged into the AXE's phantom power jack and a 7-to-5 pin MIDI cable pigtail. I...
  60. S

    MIDI Maestro Seen yesterday @ NAMM

    http://singularsound.com/product/midimaestro/ Not available until May but the prototype looked very cool. Rep demo'd editing via iPhone/Android app with Bluetooth connection. Prototype has 2 Expression jacks but I was told they were probably going to change that to only 1 and use the other jack...
  61. S

    Axe-edit connection problems

    Axe-Edit connections are extremely unreliable for me lately. I've been running the same configuration for years but in the last few months it's really gotten bad. I'm having no such issues with any other USB MIDI connections on this Win7X64 PC. Axe-Edit never recovers either and I just lost a...
  62. S

    Input 1 question

    geeze, can ya tell it's a sausage party in here or what! (Ok try to focus and don't go THERE....) I have a mando patch using tone match. I use a cheap stick on piezo pickup through a Fishman exteral preamp. I would like to keep the preamp plugged into the Axe/Fx so I don't have to swap cables...
  63. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    I don't blame you at all. :-D I have not reinitialized it yet. I have to get a full backup first. I think it's running Android 6 but will have to check when I get home. Lineage would be overkill. CM was great for the old Tab2 and made it useful again but the S5 shouldn't old enough to need it...
  64. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    I did some connection tests with my Android devices, Axe/FX II, and Fracpad v1.11 last night. Something is definitely weird about the S5-axefx connection. It never seems to get the bootstrap file or prompts to allow apps to access the MIDI device. I suspect there's an Android configuration issue...
  65. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Alex has told me his S5 works just fine. Mine is a Verizon S5, old and off network now but the OS is a Verizon load. What's yours?
  66. S

    Coolest practice/light-duty FRFR to date...

    Guess I seriously need to brush up on my mind-reading skills. 2nd time today I failed at it.... :-/
  67. S

    Midi Phantom Power

    When it comes to external power supplies ASSUME NOTHING! AC, DC, polarity, voltage, current capacity can be just about anything depending on how the device that uses it was designed. If you buy a PS on its own, read the specs and check them at the output plug with a meter before using it. That...
  68. S

    Coolest practice/light-duty FRFR to date...

    Since the SDOTD changes daily (it's a Korg Tuner today) what where you looking at, still the Korg Stageman 80?
  69. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    I'm having an issue with getting my Samsung S5/Android device to reliably connect to my Axe/FX II. I've been discussing this with Alex via email but I thought I'd post it here too to see if anyone else has any insight. The issue seems to me to be an issue with Android & the Axe/FX not...
  70. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Not sure if the subject of USB cable length w/Fracpad on Android has been covered before but I thought I'd share my experiences. Fracpad works fine on my Android devices using a single ~6 foot/2 meter USB cable but when I tried to use 2 cables of those cables joined by a connection adapter, my...
  71. S

    Anyone use special USB cable?

    I was unable to get Fracpad to work after extending a usb cable beyond 5 feet or so. Limitation may have been my old tablet.
  72. S

    World's simplest/reliable MFC for Axe-Fx other than FAS MFC

    FCB1010 w/Uno programming isn't bad using the free Ripwerx editor (java). I use the bottom row as "stomp boxes" to control a compressor, Overdrive, Chorus, Delay, and X/Y for clean /dirty amp drive settings. Unfortunately, MIDI communication is one-way so you can get some LEDs out of sync if you...
  73. S

    Anyone use special USB cable?

    Use MONSTER for the shiniest bits! j/k of course.... :-D Note that there *IS* a rather short distance limitation for USB cables, 5 or 3 meters depending on the device speed. I recently ran into this limit when trying to extend USB cables to use Fracpad on and old Android tablet. Usually...
  74. S

    Using The Axe/FX To Translate MIDI From USB to 5-pin DIN

    I was surprised that I was able to see the Fractal MIDI USB port within Android. Usually, that will only be possible for "class compliant"/driverless interfaces yet it requires a driver in Windows. Oddly, sometimes the Fractal USB port doesn't show up in either TouchDAW or MIDIScope android...
  75. S

    Using The Axe/FX To Translate MIDI From USB to 5-pin DIN

    I'm playing a few songs on keyboards in my latest band and need a live keys rig. I bought an inexpensive weighted 88-key controller some years back for recording but it has USB MIDI only and limited on-board sounds. I experimented with using a laptop as a VSTi host (Cantabile - great live VST...
  76. S

    Small FRFR speakers?

    Any studio monitor system will work. I use an older set of Behringer Truth monitors (not what you'd call "well respected" by "the critics") and it the Axe sound great through them.
  77. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    v1.08 is also working great on my old Samsung Galaxy Tab 2 w/Cyanogenmod 13 OS.
  78. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Even a R/O display would be great. It would be helpful to see which CCs and External Controllers are being used in a patch and over a range of patches. It would also be nice to be able to run Fracpad while disconnected (no MIDI interface detected) to load and view local patch files.
  79. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Are the Global, I/O, and Control parms remotely accessible via MIDI? I find it frustrating to have to work from the LCD for some things that Fracpad and AxeEdit don't expose. I recently spent some time setting up custom scales and mapping controllers to select between them and it was...
  80. S

    Guitar cab vs FRFR?

    When I was playing larger venues, I never trusted the sound crew to be in total control of my stage level. Perhaps it was because the bands were large and vocal-oriented with a lot of singers. My guitar never got much attention during sound check and we ALWAYS ran short of monitor channels. I...
  81. S

    Intelligent Harmonizer On-The-Fly Scale Changes

    Last night I setup an external controller tied to MIDI CC17 (which I was using to control the WAH block but won't need the Hotel patch) to control VOICE 1 of the Custom Shift and Pitch Block bypass. Heel down (tolerance 20%) turns the pitch block off. MIN =1 and MAX =0 (0 controller value =...
  82. S

    Intelligent Harmonizer On-The-Fly Scale Changes

    yes, that's what I was thinking about, thanks.
  83. S

    Intelligent Harmonizer On-The-Fly Scale Changes

    I finally got to play around with the pitch block last night. After some confusion (the manual doesn't really explain things very well in this area), I was blown away to find that I can set up 32 custom shifts - that is SO cool! I wish I could edit the shifts in Axe-Edit rather than using the...
  84. S

    Intelligent Harmonizer On-The-Fly Scale Changes

    I'll try using a momentary Pitch block X/Y change, thanks.
  85. S

    Intelligent Harmonizer On-The-Fly Scale Changes

    Let me preface this question by saying that I have not yet worked with the Axe/FX II's Intelligent Harmony effect. Tonight, I will explore setting it up for Hotel California, not the iconic Felder/Walsh ending triplets but for the riffs during the verses. I have configured 2 devices (Johnson...
  86. S

    Saw Kansas last night

    Saw them in the 90s when Rich was using the JM150. Cool amp, ahead of its time. I still have mine. Proprietary pedal control architecture was really done well. Had issues with the pedal/amp connection though after many years of gigging. If contact was lost, amp needed to be restarted to...
  87. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Get a tablet running Android 6.0.1 and you'll be good to go. I've gotten good results with the latest FracPad release and other levels of the OS but 6.0.1 is your best bet.
  88. S

    Somebody please convince me to NOT buy an Axe FX with my tax return.

    Don't do it. It will make you too happy. so... convinced?
  89. S

    Complete Noob

    Plan on getting a control pedal of some sort unless you are a "no effects" guy. FAS's MFC-101 is probably the most comprehensive solution, but it's pricey. If your comfortable with a little MIDI programming there are a number of less expensive pedals. I use an Axe/FX II w/ Behringer FCB1010...
  90. S

    Playing an Axe/FX II Has Ruined NAMM For me

    I just need one .... <more>
  91. S

    Playing an Axe/FX II Has Ruined NAMM For me

    I've been going to the winter NAMM show most every year since the mid 80s. Almost every year I come home jonesin' for a great new box of TONE that I if I just had I could be so much better. Now, I hear all those great tones from the new boxes at the show and just think, yeah that's in the Axe too.
  92. S

    FracPad Android tablet recommendations?

    If you want to try to repurpose an older tablet, the best bet is to load Cyanogenmod on it. It takes some time to get through the process but it will effectively remove the extra UI layer almost all vendors & communications companies put on Android devices. It will also get rid of the junk apps...
  93. S

    FracPad Android tablet recommendations?

    https://swappa.com/buy/devices/tablets?platform=android I've read the Asus Nexus tablets are the best. Didn't see the Amazon req .... this one would probably work well:
  94. S

    Storing Presets on Behringer FCB1010 with Ultra?

    Do yourself a BIG favor and grab a copy of RIPWERX. Patch programming from the FCB itself is an exercise in futility.
  95. S

    Step by step how hook and set this Unit up Properly

    I'd suggest first putting it on your desk, plugging in the AC power, a set of headphones and a guitar (in the front jack). Once you've verify it's working as expected, then figure out how you want to use it. There are many options, the easiest being powered full-range speakers. For gigs, I...
  96. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Thanks. Unfortunately (as communicate via email) v1.03 won't load on my Galaxy Tab2 running Android 4.2.2. I use the Tab2 for chord/lyrics at some gigs and it would be perfect to also be able to run Fracpad on it. I did get it loaded and authorized on a phone running Android 6 but I haven't...
  97. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    OK, purchased. I DL'd 1.02 which won't load on 4,2,2 then remembered you said you had a newer build. Please email to gary_pr@yahoo.com.
  98. S

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Cool, thanks! Will try for later today. Busy work week...
Back
Top Bottom