Search results for query: *

  1. deathbyguitar

    Axe-FX II spotted in Sega's new Jet Set Radio teaser

    At 57 seconds: As much as I love my Axe-FX III, I do miss the iconic green. I changed my III's logo color to III to compensate lol
  2. deathbyguitar

    Need advice for determining the EQ curve of a Xitone power amp

    Before I go any further, let's keep the discussion of Xitone business practices out of this thread if possible. Not to discredit the very valid concerns. Anyway.... I've got 2 Xitone cabs with nearly identical specs. One sounds perfect, the other sounds terrible. The good sounding one has a...
  3. deathbyguitar

    Wish Hartke LH1000 or LH500 head (schematic attached)

    I'm super grateful for the recent inclusion of the Hartke 2x10 Dynacab, . What about including a Hartke head to go with it? I'm attaching the schematic for both the LH1000 and LH500.
  4. deathbyguitar

    I wanna make an FRFR comparison video. Suggestions for methodology and other odds and ends?

    I'm in the middle of going down a rabbit hole with FRFR speakers for no reason. It's kind of my thing. Anyway, I figured this would be a perfect opportunity to make a back-to-back comparison video (or several) about FRFR speakers that have been mentioned on the forum and elsewhere. I've seen...
  5. deathbyguitar

    Cats-FX III

    My little studio assistants at work.
  6. deathbyguitar

    Am I imagining this? Brand new strings sound muddier than broken in ones

    I feel kinda dumb asking this but I'm not sure if I'm imagining this or not - Whenever I change strings, the fresh set always sounds muddy compared to maybe a day or so later. Feels like there's more low mids or something, just less focus overall. Mind you, this is for heavy rock/metal tones...
  7. deathbyguitar

    AFIII Alt-Metal Recto Goodness

    This is by far the best guitar tone I've ever come up with, very close to what I've been hearing in my head all these years. The guitars in this clip are not EQ'd except for some boosts on the master bus applied to the whole mix. This was done using Recto 2 Red Modnern and York Audio's Mesa 412...
  8. deathbyguitar

    Recto Tube/Diode and Spongy/Bold settings. Let's Discuss.

    I saw a few questions/requests in the Cygnus X2 beta threads so I figured now would be a good time to re-explore this. A few questions for those of who have real Rectos to compare with: 1. The Bold/Spongy switch is a variac according to Cliff. Would a Variac value of 100% in the Axe roughly...
  9. deathbyguitar

    What's the point of a 4x12 in 2022? - Genuine question

    I feel like I might be missing something very obvious. - What purpose does a 4x12 serve in this day and age? It seems like if you're playing a tiny place with no PA or only a PA for vocals, a 2x12 would probably give you more than enough volume. For a larger room with a more robust PA, wouldn't...
  10. deathbyguitar

    Wish Revised Recto 4x12 speaker impedance curve names

    I feel like the current Recto 4x12 speaker impedance names are confusing. 4x12 Recto Large for example - Is that the Standard angled oversized? If so, what's the 4x12 Recto Slant? 4x12 Recto Small is probably the Traditional but which one? I think the impedance curve names should be closer to...
  11. deathbyguitar

    AFIII Chainsaw sledgehammer tone (preset included)

    Experimenting with different amp settings than I'm used to. Worthless throwaway riff but I think it sounds pretty good. Recto 2 Red Modern with York MES 412 OS Mix 15. Included preset uses some stock cabs instead.
  12. deathbyguitar

    CabLab vs cab block for recording - Any real difference?

    I'm torn between fully committing to tones on the Axe on the way in vs "re-cabbing" using CabLab while mixing. Is there any real difference between these two in this scenario? Shouldn't they sound/behave exactly the same if I'm not using any EQ/Saturation settings in the cab block? Does the amp...
  13. deathbyguitar

    Breaking in new headphones - Or not???

    So I just got some Shure SRH1840s for mixing and I think they sound pretty great so far. However, I've seen so many conflicting things about whether the benefits of breaking in headphones with pink noise and such are actually real. I've seen quite a few people talk about how significant of a...
  14. deathbyguitar

    "We've been trying to reach you about your car's extended warranty" (Song)

    We've been sitting on this since May and I'm super happy to finally have it out there.
  15. deathbyguitar

    AFIII Full Res Recto goodness (preset included)

    Like the title says. First half of the clip is my usual heavy sound (boosted Recto 2 Red Modern with Factory 2 850 & 852 cabs) with the 4x12 Recto Room L & R cabs mixed in at equal volume. Second is just the room IRs solo'd. I would never use combinations like this in a mix but it feels super...
  16. deathbyguitar

    FC-6 and hold function indicators?

    I've got an FC-6 and I'm trying to see whether or not the following is possible. I read the manual and some forum posts but I might have missed something. In the Scenes layout, I've got switches 5 and 6 setup with hold functions to trigger scenes 7 and 8. Scene 7 is identical to Scene 5 except...
  17. deathbyguitar

    What's the idea behind the FAS Bass model?

    Like the title says...I know it's an original creation but I'm not really sure what to make of it. Anyone using it for a bass rig? To my ears is kinda sounds like the Tube Pre model. I'm curious what the thought process was when makin that model but I'm sure the specifics are something that...
  18. deathbyguitar

    Amplitube Ampeg SVX for free (limited time)

    https://audioplugin.deals/amplitube-svx-by-ik-multimedia-free-download/ref/11/?campaign=AmpliTubeSVX I got this the other day and it's the real deal. The model of the Ampeg BA-500 sounds and feels so good that I'm gonna use it instead of my Axe-FX III for bass on my album. Hope this is helpful...
  19. deathbyguitar

    My new Xitone cab that I've dubbed "The Hammer"

    Just got the finished cab yesterday. It's a slight deviation from the Michael Britt design in that it's a fully sealed and also 2 inches deeper. I wanted something similar dimensions to the Mesa Recto 1x12 (which I loved way back when) and the Tech 21 Deuce Deluxe (which I was debating getting...
  20. deathbyguitar

    FRFR Design - ported vs. un-ported?

    I'm doing some tweaks to a recently built 1x12 cabinet that's 14 in deep (if that makes any difference). Just wondering what the advantage of having ports in a full range cabinet would be versus omitting the ports? I'm a metal guy so I palm mute constantly. I know that porting is supposed to do...
  21. deathbyguitar

    Craziest/most elaborate use of a III you've seen?

    So I'm getting an Axe-FX III in the mail tomorrow and my needs are extremely meager. I mostly use one preset and amp model 90 percent of the time. But that got me thinking... What's the craziest/coolest/most elaborate/ridiculous use of a III you've seen? I think I read somewhere that Plini's...
  22. deathbyguitar

    New BluGuitar Amp X - Holy $#!%

    If there were ever anything that could pry me away from my Fractal fanboy life, this would probably be it. https://www.bluguitar.com/amp-x/en/ I'm really intrigued by the idea of this whole Nanotube thing. Not quite solid state but also not super duper heavy like old school tube amps. This...
  23. deathbyguitar

    Having issues installing audio driver in Windows 10 - HELP

    Happy New Year, Fractal family! I'm having difficulties installing the Axe-FX II driver on my laptop with Windows 10. The USB MIDI driver component installs just fine but the ASIO driver doesn't install. The Device Manager shows that it can't start the driver but it's using a generic USB Audio...
  24. deathbyguitar

    Marshall JCM 900's and 2000's - Why are these never emulated in modelers?

    I'm not even a Marshall guy (Recto or GTFO) but I was just curious. I've noticed that most of the time if a Marshall amp is gonna be included in an amp modeler product it's usually a JCM 800 or a Plexi. I don't think I've ever seen a JCM 900 or a JCM 2000/DSL/TSL modeled anywhere. Were these...
  25. deathbyguitar

    I was featured on the local news for the dumbest thing imaginable.

    https://www.wfmynews2.com/article/news/local/2-wants-to-know/greensboro-dating-app-online-dating-singularity/83-de8a5d3a-dea6-4a71-8da0-f2394f071cdc Also, notice the glowing green screen in the background. 8-)
  26. deathbyguitar

    Helmet - In the Meantime (full band cover)

    Celebrating my birthday with a cover of one of my favorite songs. Mix isn't the best but whatever. Used Recto 2 Red Modern for guitars, FAS Bass for Bass.
  27. deathbyguitar

    Will there be a version 2 of FAS-FX Reverb or any updates to it?

    So I know the FAS-FX Reverb doesn't seem to be hugely popular, but is there a chance of there being an updated version that implements some of the new stuff from the Axe-FX III? I use this plugin on every mix and would gladly pay for an upgrade.
  28. deathbyguitar

    Newer tube desgins (ala Korg Nutube, BluGuitar Nanotube 100, ect)

    I'm deeply fascinated by the new kinds of of tubes that some companies are using in their amps these days. BluGuitar has some sort of mini tubes in their pedals and Korg has the Nanotube stuff which I've heard good things about. Iv'e seen some other companies over the years with similar...
  29. deathbyguitar

    Output Comp GR meter makes no sense to me

    When using the Amp block's output comp, I notice that the gain reduction meter's base number increases when I increase "Output Comp Amount". For example, if I put it on 5, the value will be 13.3 instead of 0. When I'm playing, the gain reduction meter decreases but it's still showing positive...
  30. deathbyguitar

    Seeking advice for compressing cleans before amp block

    I'm looking to even out my clean arpeggios as well as add a bit more sustain in clean parts in general. I've been playing around with the Studio Comp with near stock settings (brought down threshold and release a bit) and while it seems to be doing the trick (placebo?) the drastic difference in...
  31. deathbyguitar

    Power amp transparency questions

    As ridiculous as it sounds, I've found that I LOVE the tone of my Axe-FX II straight into my old Yamaha PA cab (without a poweramp, mind you) and it has almost enough juice to play comfortably at bedroom volumes. My heavy preset translates perfectly and the visceral feeling is amazing. Is it...
  32. deathbyguitar

    Bug? "FAS Bass" Amp Model - Aliasing (I think)

    I posted a clip of what seems to be aliasing at around 6-8k when using FAS Bass. Haven't heard it with any other amps so far. This clip was recorded with just my bass into the amp block, fully reset beforehand using firmware Quantum 10.01 on my Mark I. You'll need to turn your...
  33. deathbyguitar

    Axe-FX III Reverb vs FAS-FX Reverb?

    Just wondering if the III uses the same reverb as FAS-FX Reverb or if it's something entirely different/better. Thanks.
  34. deathbyguitar

    Questions about USA Bass 400 models

    So I've been using the USA Bass 400 model forever (usually the 1 model) but I can't really figure out what's supposed to be the difference in the grand scheme of things. I know that the USA Bass 400 2 model is supposed to be an emulation of the Bass 400 with the Deep switch engaged, but what...
  35. deathbyguitar

    iLok Cloud?

    Will Fractal support the new iLok Cloud functionality? Looks pretty promising.
  36. deathbyguitar

    Simmons DA200s - Possible FRFR-ish for bass

    I bought a used Simmons DA200s drum amp yesterday for $180 after reading that it also works well for bass. So far that certainly seem to be true! I ran my Axe-FX through it using the USA Bass model the cab sim on and it was nice and punchy, but also really clear. I've got practice tomorrow and...
  37. deathbyguitar

    Recto Red Modern 2 Quantum 7 with Ownhammer MES-OS+TR

    This is probably my favorite guitar tone I've ever heard ever. The two different mesa IRs combined really balance eachother out, I think. First one is both the MES-OS and TR togeather, second is just OS, third is just TR. Lemme know what you think! Btw, amp settings for this were super quick...
  38. deathbyguitar

    Super aggressive Recto 2 sound.

    Here's a little mix test of some stuff I'm working on using OwnHammer Mesa ST and OS impulses. Not the greatest mix (it's only a pre-production demo anyway) but I think you get the picture. I've had good success with using the TS-808 in front of the Recto 2 also with the Cut engaged. What do you...
  39. deathbyguitar

    Designing tones with recording in mind?

    I was wondering about how you guys approach coming up with tones that you will use on a recording, specifically heavy rock/metal tones. Obviously ,a pro-quality mix will have tons of processing on the master, like EQ, compression, saturation and such, but do you guys like to craft your tones...
  40. deathbyguitar

    2 beta 3 possible bug with speaker low res [NOT A BUG]

    I updated from 1.06 to 2 beta 2 the other day and was in heaven. I updated to beta 3 and thought something was really off. I've been comparing the Recto Red models and noticed that 1.06 and 2 beta 3 have different speaker low res values. Thing is, I don't recall there being this change in beta...
  41. deathbyguitar

    TX Star clean model - Am I missing something?

    I really like the vibe of the Lone Star / TX Star Clean model, but I'm noticing that with identical gain/MV settings to a Mark/USA clean model, the Lone Star gets pretty dirty.When I turn down the MV or gain it seems to loose something, but it's possible that it's confirmation bias running...
  42. deathbyguitar

    FCB1010 and Looper controls: What am I doing wrong?

    So I've got looper controls mapped to my top 5 pedals in a given bank. I have the Record and Play commands mapped to 28 and 29 and the looper responds accordingly when I hit those pedals. The problem I'm having is that the Record function won't stop when I hit Record again, and the Play button...
  43. deathbyguitar

    What happened to Tosin?

    Every so often I like to browse the website and see who the latest endorsers are. I noticed Tosin Abasi is no longer on there. Interesting. Wonder if this has to do with the Positive Grid stuff he's been hawking lately...
  44. deathbyguitar

    So it's come to this...

    Had a dream last night that I worked for Fractal and Cliff angrily fired me. To be fair, I was acting really unprofessional and crazy at a convention the company was attending. This isn't even the first Fractal-related dream I've had. :lol
  45. deathbyguitar

    Do G3 and Quantum go hand in hand?

    Just wondering if G3 modeling tech was something that Quantum was building on, or has Quantum rendered it obsolete? Are the remaining non-G3 amps going to be G3'd?
  46. deathbyguitar

    Explain your thought process for mixing IR's

    So I'm working on perfecting my distorted tone and I've got the amp tone just where I like it. I haven't yet mastered the art of IR mixing. Could anyone provide a few pointers or insights into your thought process? For example, when combining multiple IR's, are you just picking ones that have...
  47. deathbyguitar

    Quick Cab Pack 14 Test

    Here's a quick clip of Cab Pack 14 that I recorded last night using 4x12 Recto and 4x12 Recto new. Amp was Recto 1 Modern, TS808 in front. I also scooped the shit out of 250hz because that frequency is the devil...or at least for the aesthetic I'm after. Still needs a bit more high mids or...
  48. deathbyguitar

    Suggestions for usability improvements/features

    Cab Lab 3 is great so far, but there's a couple of little things that I think could make a difference usability-wise. I may be the only person who thinks any of this is a good idea, but it's worth a shot. 1. Show tooltips for full file name if too long. I have quite a few IRs that run over...
  49. deathbyguitar

    Examining frequency response of 3rd party IR's

    I've been using a certain cab simulator VST for a few years because it's way easier to get it to sound I want verses ever other set of IR’s I’ve tried. Thing is..I want to know WHY. Not entirely sure which route to take, but I think I may need to try and create IR’s of the plugin’s...
  50. deathbyguitar

    Mark I incoming! Super deal. I'm on cloud nine.

    Snagged me a Mark I on Craigslist for 1300 bucks! Seriously. Was shipped today and should be here on Saturday. I just had to share this with you guys. Never played a II before. Someone high-five me.
  51. deathbyguitar

    Ultra knob not working correctly when scrolling through presets

    Ultra's knob not working correctly when scrolling through presets The knob on my ultra no longer works right when I try and scroll through presets. Half the time it'll take me to the next preset if I rotate clockwise, other times it'll just take me back to the previous one. Do I need to send...
  52. deathbyguitar

    Help. V30 cab is the only IR I don't hate, so clearly I'm something wrong

    So I've had my Ultra since October and I've found that the V30 cab is the only thing remotely suitable for the music I'm trying to record, which is funny considering it's not even based on a real cab. There's something unique about it's EQ; it lacks most of the frequencies I hate for distorted...
  53. deathbyguitar

    And for my first post...my holy grail of guitar tone.

    Made this the other day. Practically crapped myself when I came across this tone, but the next day when I pulled up the preset to re-create what I had done, it sounds totally different, so I must have changed something after I saved the preset to get it to sound like that. Gonna spend the...
Back
Top Bottom