Search results for query: *

  • Users: edo
  • Order by date
  1. edo

    Emulating Korg SDD300

    I personally use sdd into vintage digital delay, changing the mod waveform to triangle, hi cut to 17khz and bit rate to 11 (which is actually 13 being a reverse value). Mod speed between 3.6 and 3.9, and depth between 45 and 55 - those get you really close to what I consider the sweet spot on...
  2. edo

    Question about vol/pan block

    Very clear, thank you!
  3. edo

    Question about vol/pan block

    I just happened to find out by accident that when you have 2 amps / cabs in parallel, usually when you switch from A/B to A+B the volume gets louder, but if I use the vol/pan block after the amps and pan one cab left (setting channel A of the vol/pan to left only) one cab right (setting channel...
  4. edo

    Dynacabs tested on Edosounds Presets

    I finally got to test a couple new dynacabs - namely the 2x12 ClassA 30 and 4x12 1960TV - on 2 Edosounds favorite presets: U2 - Streets (from U2UV pack for AF3) GNR - UYI (from Famous Riffs Vol.3 for FM3) Very impressive how you can get great sounds in seconds! Check them out:
  5. edo

    Axe-Fx III Firmware 24.00 Public Beta #2

    Is it normal that the AC30TB has twice the gain it used to have? Loading my go to patch (drive at 2.3ish which should be edge of breakup) sounds like it has a fuzz in front of the amp..! Can you check it? Thanks!
  6. edo

    Axe-Fx III Firmware 23.05 Release

    Sounds very exciting! Just out of curiosity, does this have to do with more correct values over existing parameters or is it an entirely different algorithm? In other words, for fm9 and fm3 can we just copy the new af3 default values or do we have to wait for a new fw?
  7. edo

    Presets Edosounds summer sale

    Jt19 for af3 is for fw20.04. I almost finished updating all packs for fm9, will move to af3 next - although I have a few gigs coming up, so it will take a couple weeks, probably over the next break in early august
  8. edo

    Presets Edosounds summer sale

    Summer sale is up and running! 20% off on every product until July 31, using promo code SUMMER23 at checkout www.edosounds.com
    • edo
    • Thread
    • Replies: 4
    • Forum: Vendors
  9. edo

    Presets Edosounds updates

    Eventually there will be a summer sale at some point 😉
  10. edo

    Presets Edosounds updates

    Hello everyone, it's been a long time since I last posted in the forums.. I had to take a forced break from my activity with edosounds commercial presets because of a landslide right behind my studio which forced me to keep out for close to 1 year while they secured the mountain. Now I'm finally...
    • edo
    • Thread
    • Replies: 2
    • Forum: Vendors
  11. edo

    Pitch Block - Like a Stone solo (Rage Against the Machine)

    You should use the classic whammy mode, 2 octaves up, and assign it to an expression pedal. Here's a sample from one of my commercial preset packs:
  12. edo

    Sell me on dual amps

    You're still using 2 maximum per scene, put you have 8 preloaded in the channels, so you can switch between 8 amps (or any combination of 2) within 1 preset
  13. edo

    Sell me on dual amps

    Besides all reasons above (which I second), the simplest reason is that you can have 8 amps in one preset as opposed to 4, which is cool because you can have 1 preset to range from jazz to metal and everything in between, but its even more useful because you can load 8 amps - or 8 of the same...
  14. edo

    Axe-Fx III Firmware Release Version 16.03

    I haven't installed this yet, but I meant to ask this question on the previous fw thread: is there any specific reason why the presets that used to use the tweed deluxe now default to tweed deluxe jumpered?
  15. edo

    Delay Block Update

    Comparing sdd rack and add pedal is like apple vs orange.. the only thing they share in common is the name, they didn’t even get the color right!! 😄
  16. edo

    Delay Block Update

    Try and reduce the bit rate to 13 (so bit reduction = 11) on the vintage digital and turn the eq hi cut down to 17k (or 8k), set the modulation wave to triangle, and you're more than a half way there..!
  17. edo

    Vox Ac30 Midrange

    As far as the wight switch, not sure what that does, but usually "weight" refers to the lows / low mids, it could either be some sort of "deep switch" or tone shift. As a matter of fact, on Edge's vox1 weight is on "more" and on vox2 it's on "less", and if you listen to them, vox 1 sounds much...
  18. edo

    Vox Ac30 Midrange

    As far as the mids, technically speaking a stock ac30 doesn’t have a mid knob, but the mids are heavily affected by the way you set bass and treble. Also, the volume of the normal channel affects the treble boost channel to some extent, but I never liked what it does, it adds some sort of...
  19. edo

    Axe-Fx III Cygnus Factory Preset Banks A, B, and C

    I just finished a 40 minute jeff beckesque noodling session with this preset!
  20. edo

    Wish Global Blocks

    Any word on this?? It would truly be a game changer..!!
  21. edo

    deluxe tweed bright switch..

    Yeah, I know the Tweed Deluxe doesn't have a bright switch (it is one of the few amps I still own), but I was wondering whether its intentional to leave the switch without functioning or it was some sort of "ops, I forgot!" kind of thing :-)
  22. edo

    deluxe tweed bright switch..

    The bright switch on the deluxe tweed doesn't seem to have any effect. Is this normal behavior or possible bug?
  23. edo

    Another IEM Question

    Chances are you’re either not receiving the other side from the mixer, or the body pack is panned hard side
  24. edo

    AF in studio: any benefit from mic pre's?

    Oh, yeah, I know! I will surely try, i was just making sure it would not be a wrong principle, like eg connecting an amp sim into a guitar amp, since I always assumed the mic preamp character should already be printed in the ir one is using.
  25. edo

    AF in studio: any benefit from mic pre's?

    I generally always tweak my presets for live use, but in the last year I obviously found myself much more involved in studio sessions than live playing. So because I am considering to upgrade my home studio with some fine mic pre's / compressors etc to use for tracking vocals, acoustic guitar...
  26. edo

    Any anti modelers have religious conversion?

    Well, it's been a long way since the bean and that old modeling generation... giant steps every now and then, so the worst / cheapest modeler today sounds way better and "more real" than whatever the flagship was at the time. Said that, out of all the more recent modelers I played, the fas were...
  27. edo

    Axe-Fx III Cygnus Factory Presets - Bank A Preview

    Bank A is where its at anyways!!! Sweet!! P.S. Can I become a beta team member?? :blush:
  28. edo

    Any issues with running verb and delay in front of amp Blk

    Some fx default with reverse phase on one side only (eg 2290 delay) and you won’t hear any delay until you switch phase reverse to “none” or “both”.
  29. edo

    What will be better about Cygnus?

    I agree, in fact I always cut about 3db’s at 250hz in the amp graphic eq. Now I only cut 1.5-2 but with increased bass you get more weight with no mud / flubbiness
  30. edo

    What will be better about Cygnus?

    I generally don’t like to exaggerate, but this fw truly is a game changer, seriously.
  31. edo

    What will be better about Cygnus?

    Tbh I find it’s the other way around! I always found the low end a little flubby until fw15, now i find it a bit tighter - in fact a couple days ago I updated one of my U2 packs and I ended up increasing the bass compared to where it was in the previous fw! And I also increased the treble cut...
  32. edo

    What will be better about Cygnus?

    amp modelling, ridiculously better
  33. edo

    New Axe-Fx III Sounds Dark/Muddy, Advice?

    Try and select a different amp model and then back to the former one.. I remember I had a similar problem (around fw 12 iirc), and basically selecting a different amp and reselecting the former one brought life back into the tone.
  34. edo

    AF3 into Vox AC15 Amp

    It's the way my presets are routed. I split the signal after the fx chain before the amp block on 2 parallel paths, one path goes to amp / cab sims and to output 1 L&R, the other path goes into an fxl block to output 2 L. This way you can either use amp sims using output1, a real amp using...
  35. edo

    AF3 into Vox AC15 Amp

    Like @Toopy14 said, that's correct, use output 2 L straight into a real amp (amp / cab sims are only routed to output1). This way you're sending the fx chain to a real amp. You might need to adjust some fx level based on your amp settings, as the levels in my presets rely on the amp sim at edge...
  36. edo

    Wish Lovetone Product Line

    Oh, yeah, I know the difference between the live and studio version! The live version in fact does not use the doppelgänger at all, you can hear the doppelgänger in last night on earth live (the refrain after the choruses). However, when I said I managed to get decent results with what we have...
  37. edo

    How would you characterize the leap from v15.x to v16.x

    In an hypothetical chart of the most revolutionary things in history, it would be something like this: 1) the invention of electricity 2) the invention of electric guitar 3) the transition from 15.xx to 16.xx 4) computer 5) smartphone
  38. edo

    Wish Lovetone Product Line

    I managed to get fairly decent meatball and doppelgänger sims out of what we already have, but psychologically, the idea to have dedicated blocks named after those would definitely make for a better result - at least visually!!
  39. edo

    You guys are in for another treat.

    You’d better not be f’in’ with Cygnus!!!
  40. edo

    Fender Ultra Strats - HSS vs SSS for Axe FX III?

    I wouldn't focus too much on what sounds good though the af3, I'd rather think of what you're after. Personally, for my taste and for what I normally like to play, an SSS guitar doesn't sound good on the af3, on the af2, on any of my amps and so on, just because I never really cared for that...
  41. edo

    AFIII Persnally, the Analog vs Digital battle is over!! (JCM800 A/B clip)

    My perception from my studio monitors (Adam S2A) is that the first clip might sound a little brighter because clip #2 has a little more weight in the bottom end. But that could be because my JCM800 is the 20W studio version which I would assume has a smaller transformer and can't produce the...
  42. edo

    Axe-Fx III 16.00 Beta 8 "Cygnus" Firmware - Public Beta #5

    Same here! The only new preset I made (which is going to become my go to for quick sessions) has tweed twin for clean, plexi50#1 for crunch and brit800mod for power and lead. Just glorious!
  43. edo

    Do major firmware updates make commercial preset packs obsolete?

    +1. Personally I do try and update my commercial preset packs whenever a new fw has a major impact on amp block and drive block. When a new fw comes out, sometimes preset packs just sound better without touching anything, and sometimes they need a retouch because the new fw added more drive, or...
  44. edo

    Axe-Fx III 16.00 Beta 8 "Cygnus" Firmware - Public Beta #5

    the Kemper is a mystery I will never understand. You can use a triple rectifier profile or a fender Princeton profile, they will always sound like a Kemper, with that annoying ooomph in the low mids that FAS sorted out about 75 fw's ago!
  45. edo

    Axe-Fx III 16.00 Beta 8 "Cygnus" Firmware - Public Beta #5

    That's correct, but I seriously believe that if I used a real amp 2 nights in a row in different venues, placing the same mic on the same spot, the comparison between the 2 would probably sound more off than the jcm comparison! And like I just wrote in another reply, my jcm is the 20w studio...
  46. edo

    Axe-Fx III 16.00 Beta 8 "Cygnus" Firmware - Public Beta #5

    Could be, but also my jcm800 is the 20W studio head, I believe it has a smaller transformer than the 50/100W af model, so it does sound a little thinner. But the feel is incredibly close!
  47. edo

    Axe-Fx III 16.00 Beta 8 "Cygnus" Firmware - Public Beta #5

    I already posted this in the af3 recording subforum, but I'm reposting here if you don't mind, because everyone has to know that Cygnus finally fills the gap between a real amp and a digital model! Definitely a game changer - and its till a beta!
  48. edo

    AFIII Persnally, the Analog vs Digital battle is over!! (JCM800 A/B clip)

    I think I'm going to post in the wish section to stop messing with the modeling, it just can't get any better than this! Can it?? In this clip I plugged into the af3, sent an output to the jcm800 input, jcm800 output into a torpedo captor x with cab sim bypassed, and form the captor back into...
  49. edo

    Axe-Fx III 16.00 Beta 6 "Cygnus" Firmware - Public Beta #3

    accidentally stopping by, and.. sweet!!
  50. edo

    Implemented Marshall Jubilee & Suhr PT15

    There you go, from the Cygnus beta5 topic comes the official confirmation!
  51. edo

    Implemented Marshall Jubilee & Suhr PT15

    Yes, and from a private chat: “Our Brit Silver model is actually based on the Lerxst which Alex Lifeson gave me.”
  52. edo

    Implemented Marshall Jubilee & Suhr PT15

    I can’t remember whether it was a forum post or a private chat, but I remember cliff saying the brit silver was based on a lexrst silver he borrowed from lifeson. Which was the explanation why I couldn’t get it to sound anywhere near my jubilee head..! I’ll see if i can find the quote
  53. edo

    Implemented Marshall Jubilee & Suhr PT15

    IIRC the brit silver is based on some kind of modded jubilee owned by Alex lifeson.. it would be cool if we could have the original silver jub too! And the PT15 would be cool too! Unless someone has info on what it’s based on and how we can approximate it with what we already have..!!
  54. edo

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    You guys realize some of you have been complaining about a fw that's not even been released yet?? It's an uncomplete beta, it's like your wife just turned on the oven and you tell her the Wellington filet was much better last week..!
  55. edo

    Sync user cabs between Axe-Fx 3 and FM3?

    Is there a way to sync user cabs between af3 and fm3? Obviously with all limitations considered, for example if I load 120 Ir's in the fm3, is there an easier way to sync them in the af3 other than manually import them 1 by 1 in the corresponding user slot?
  56. edo

    FM3 VS Quad Cortex

    Personally, if the idea is to have a smaller / fly rig alternative to your main af3 rig, I’d go for the fm3 so that you can use the same presets more or less. In any other case, I’d go for the fm3 anyways! 😁
  57. edo

    Believe it or not... Can't get the Tweed amps to sounds fizzy enough

    What IR are you using? I used to turn the bright switch on to get closer to my edge signature tweed deluxe, but when I finally captured the IR of that very amp, I no longer needed to engage the bright switch to make it sound nearly identical.
  58. edo

    FM3 Firmware Version 3.0

    I don't think it matter, it just happened again on a completely different (and fairly basic amp > cab > reverb) preset
  59. edo

    FM3 Firmware Version 3.0

    Great, thank you!! However, just to let you know @BryantP, my fm3 froze 30 seconds after startup.. connected to MacBook Pro, FM3Edit (latest version) running, no daw, no preset change, no tweaking. It just froze while doing nothing basically. EDIT: Now it just froze while recording in a daw. It...
  60. edo

    FM3 Edosounds Xmas Jam

    6 days to go.. anyone's up for it?
  61. edo

    FM3 Edosounds Xmas Jam

    I already posted this in the af3 general forum, but since I used the fm3 to record all guitars and bass, I might as well post it here instead! Anyways, I made a short arrangement of John Lennon’s happy Xmas, and would be happy to turn it into a global challenge / jam. If you want to be part of...
  62. edo

    Edosounds Xmas Jam, anybody up for it?

    I made a backing track with a rock arrangement of John Lennon's Happy Xmas (War Is Over), and I'd like to make it a global jam / challenge. But to spice things up, I'm going to pick my 3 favorite solo's and assign 3 edosounds prizes (preset packs and cab pack). So, who's up for it??? You can...
  63. edo

    FM3 Firmware Version 2.0

    As a followup to my previous post, I can confirm that: 1) the interface does not come back, it stays frozen 2) It happened with and without DAW, FM3 edit was open 3) It happened on 4 different presets (including a factory preset just a few seconds ago)
  64. edo

    What's your base tone?

    My general purpose "go to" preset uses brit800 for (not so) clean and brit#34 with different settings for rhythm and lead. I have a few fx preloaded, some pre and some post, in case I want to add them here and there: compressor, jam ray (to either make the clean channel crunchier or to boost the...
  65. edo

    FM3 Firmware Version 2.0

    I'm not in front of it right now, will do some more tests when I get to my workstation and report back. I did have FM3 edit running when it happened yesterday, no DAW, and it did happen on 2 different presets so far. Will give you more info in a couple hours, thanks for your tremendous /...
  66. edo

    FM3 Firmware Version 2.0

    FYI after installing 2.0, I still get the occasional freeze (sound coming through, but no response from any button / knob / input meter lights). This happened a couple times when connecting the usb cable into my Mac with the fm3 already on, not sure whether the problem lies in the usb connection...
  67. edo

    U2 presets

    Shameless self promotion: have you heard my edosounds Slash / GNR presets? One is based on the AFD tone, one is based on the UIY tone, and one is based on Lenny Kravitz's Always on the Run. Here's some demo clips: AFD (Welcome to the Jungle) AFD (Sweet Child o' Mine) UYI (mix of songs)...
  68. edo

    Best way to use SDD Preamp + Delay to model old Korg rack unit?

    Forget about the pedal, the only thing it has in common with the rack unit is the name! lol The axe can get very close to the rack (and identical to the pedal), although the original rack has some magic in the modulation that I haven't quite matched with the axe yet, but I don't think anybody...
  69. edo

    If the problem is hardware?

    Personally, it always happens when the fm3 is connected fm3 edit via usb and running logic at the same time (no matter if I use the fm3 or the rme as audio interface). Very annoying / frustrating, hopefully the fix is only a fw away..!
  70. edo

    AFIII 3 Italian guys with FAS units: simply pleasure....

    Thank you all! It was fun!
  71. edo

    FM3 Firmware Release Version 1.06

    Yes, I just installed the new fw and it worked with no problems, but for the presets it won't work. I'll try loading the banks separately like @dieter suggested
  72. edo

    FM3 Firmware Release Version 1.06

    I can't load the new preset banks.. I get the following message: "No response received. Please ensure the device is connected and powered on, then try again". The device is connected as I can use fm3edit. Any clues?
  73. edo

    AFIII Presets Dream Theater Metropolis Part1 (full cover)

    Thank you! It's here: https://www.edosounds.com/singlepresets (images & words preset)!
  74. edo

    AFIII Presets Dream Theater Metropolis Part1 (full cover)

    A couple days ago I made a John Petrucci commercial preset for FM3, yesterday I was converting it for AF3 and I got carried away with the power of the beast, so I made a deluxe version (for AF3 only, and possibly one of the best presets I've ever made!) and recorded the full guitar cover of...
    • edo
    • Thread
    • Replies: 5
    • Forum: Vendors
  75. edo

    Cables...

    They have different capacitance, technically the platinum is "better" (aka more hifi), but I definitely prefer the treble roll off of the 2524. I'm just so used to the timber of that cable that whenever I happen to play a different cable for any reason, it just doesn't sound right!
  76. edo

    Cables...

    I personally use mogami 2524 because I like the sound / color they add to the tone. I tried the more expensive platinum version and hated it. It comes down to personal preference
  77. edo

    FM3 JTC jam of the month

    Here’s my first “post vacation” clip, just came up with this solo for this month JTC jam of the month. I used the lead preset I made a couple weeks ago for a 1 off gig with a local band, based on the Brit 800#34. You can buy it as individual preset on my website (the preset includes 6 scenes...
  78. edo

    Help setting up external switch!

    Its the ocd, the one specifically made for fas fc/fm: https://www.ottercustomdesign.com/product-page/ocd-duo-for-fractal-audio-fc-6-fc-12-fm-3
  79. edo

    Help setting up external switch!

    I bought a dual switch that I would like to use to scroll preset up/down, and I’d like to be able to hold one of the 2 buttons for tuner. I got the preset up/down part working, but whenever I assign the hold function to tuner, it just goes straight to tuner even if I just press. I’m assuming it...
  80. edo

    In the style of John Petrucci (Preset attached)

    I already posted this clip a couple weeks ago in the AF3 recordings subforum, and since I promised I would share the preset for both AF3 and FM3, I'm going to post it here too, so you can check out the clip and get the preset if you want! I made this clip for the JTC free backing tracks of July...
  81. edo

    AFIII In the style of John Petrucci

    I updated the OP with the preset for FM3 / AF3
  82. edo

    AFIII In the style of John Petrucci

    I’m away for the weekend, when I get back I’ll share it like I did with the Megadeth patch!
  83. edo

    AFIII In the style of John Petrucci

    I took part to the jtc #jamofthemonth, it was “in the style of John Petrucci”, so i went for the i&w style (I haven’t listened to any Petrucci since metropolis 2, so I’m not sure how his tone and playing has evolved since..!) Anyways, here it is the clip: And here's the preset for FM3 / AF3
  84. edo

    AFIII Megadeth - Tornado of Souls (free preset)

    Those are bare knuckle pickups, bridge hb is the holy driver and the 2 sc’s are the Irish tours
  85. edo

    Wish New Product: Just the 2 Amps+Cabs of the Axe III

    Personally, if I had to carry a rack and a pedalboard, I would just use the axe fx and the midi controller. If I could place a fas amp modeler in a stompbox size and put it in a small pedalboard with a couple pedals, I would buy it immediately
  86. edo

    Wish New Product: Just the 2 Amps+Cabs of the Axe III

    It would be even better if it were in a pedal form, think of the two note torpedo c.a.b. m.. just place it at the end of the pedalboard chain and use your old school pedalboard as if it were an ax8 / fm3 between guitar and pa!
  87. edo

    AFIII Megadeth - Tornado of Souls (free preset)

    yeah, well, it means I faked it pretty good! 😄
  88. edo

    Tornado of Souls (free preset)

    From the AF3 forum: When I was posting the daily clips by request for the Famous Riffs preset packs, a friend asked me over and over to play this. Truth is, I don't have a 24 fret guitar (the fact that I couldn't play it was not a major concern! :D).. Well, I still don't have a 24 fret guitar...
  89. edo

    AFIII Megadeth - Tornado of Souls (free preset)

    When I was posting the daily clips by request for the Famous Riffs preset packs, a friend asked me over and over to play this. Truth is, I don't have a 24 fret guitar (the fact that I couldn't play it was not a major concern! :D).. Well, I still don't have a 24 fret guitar (and I still can't...
  90. edo

    AFIII Presets Edosounds - U2 ie15 Tour Preset Pack

    thank you very much, I sincerely appreciate!
  91. edo

    AFIII Pink Floyd - Comfortably Numb (2nd solo, Pulse)

    Considered by many the GOAT guitar solo in history, turning 40 today! Here's Comfortably numb, mostly based on the PULSE cd live version, with a few "licenses" here and there 😁 The preset is "Pink Floyd" from the "Famous Riffs Vol2" by Edosounds (aka me :D), played by Edo Faiella - Music (again...
  92. edo

    AFIII Edosounds Famous Riffs (Slash - AFD)

    I published the "Famous Riffs" preset packs for AF3 a couple weeks ago. Now they're available for fm3. I'll be posting daily demo clips on my ig page until I have all clips done to make a full length demo on youtube. Here's a preview of the "GNR - Welcome to the Jungle" preset applied to Sweet...
  93. edo

    AFIII Presets Edosounds - U2 ie15 Tour Preset Pack

    Thank you very much! Will fix it straight away! ;)
  94. edo

    AFIII Presets Edosounds - U2 ie15 Tour Preset Pack

    This was the first commercial U2 preset pack I made for AF2 about 3 years ago. It's probably my favorite U2 tour, because of a killer setlist and what I consider the best live tone the Edge has ever had! Now it's finally available for AF3, check it out and let me know what you think! Here's the...
    • edo
    • Thread
    • Replies: 15
    • Forum: Vendors
  95. edo

    Plex shift

    yeah, well, this is the only block where I encountered such difference, everything else is pretty much spot on identical. That’s why I asked to see if there’s a technical reason for this and in that case learn to live with that!
  96. edo

    AFIII Presets Edosounds Famous Riffs Vol.3

    The bundle is available for all processors, just use the contact form to specify the processor when placing the order! I’m just working on a new store for the site that does it automatically, but I am not sure when it will be ready.. Anyways, some presets do sound slightly different because of...
  97. edo

    Plex shift

    i don’t necessarily see it as a “problem” to address in the next fw, I would just like to know whether the algorithm works differently to figure out a workaround!
  98. edo

    Plex shift

  99. edo

    Plex shift

    Detune values should be irrelevant as I'm only using the first 4 delays (the other ones are off with volume set to 0%). I find the behavior of the repeats is substantially different, the af3 Plex has a different rhythmic pattern and each repeat sounds 1 octave higher than the previous one, while...
  100. edo

    Plex shift

    here you go
Back
Top Bottom