Search results for query: *

  • Users: Ironwill
  • Content: Threads
  • Order by date
  1. Ironwill

    Possible to convert a Ultra Res IR to Wave file?

    Hey guys, Would it be possible to convert a UR IR I've got from a friends cab to a Wave file actually?
  2. Ironwill

    Tonematch convert to Cab IR help

    Hey , I want to do a tone match of a recorded Track/ Tone of me where I used my favourite Marshall Cab IR in the Axe fx signal chain, my mic preamp and EQ Plugin for filtering on the Track in Pro tools, so I processed it. - When i tone match this and convert the result to Ultra Res IR is it...
  3. Ironwill

    Amp Speaker Page matched to cab?

    Iam lost with the Amp Block speaker setting to getting the realest result match to my Cab IR. Amp EVH 5150 Mk3 , default its matched to the EVH 4x12cab right? Now when using it with my Mesa 4x12 IR, to me it feels not the best Low end, highs, how I can archieve the most real setting there, It...
  4. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    How precise is the Axe fx II 5153 Red parameters of Drive, Presence and MasterVolume in FW 19 to the real amp actually, are they different at same positions??
  5. Ironwill

    EVH 5153 Red and Mesa Cab FW19B2, Avalerion - Into The Wild Remix/Master

    EVH 5153 Red/Mesa 4x12 Greenbacks Cab FW19B2, Avalerion - Into The Wild Remix/Master Thats a song I've done as Mix practice, Guitars and Bass are Re-amped with my Axe Fx II. Hope It's not too bad for your gentle ears
  6. Ironwill

    Mic sim on factory cabs?

    Hey, when select a factory cab is it suggested to use a Mic sim also? Or for example at the New Mesa Mix 4x12 cab, should I go for a Mic in this case, how is it captured when not select a mic , with a flat one?? Would be great to know.
  7. Ironwill

    Miss May I - Apologies Are For The Weak (Cover-Remix-Master Practice) All Axe-Fx II

    Hello, I had some fast fun with Re-amping and a Cover song of "Miss May I". Found the DI's and Midi of this Track for Mixing Practice, Not finished this Remix and Master so far. And already noticed few things (Drive and Phases) need to be corrected, most likely a little too much Drive or...
  8. Ironwill

    Real Amp Head in the FXLoop, possible?

    Hey, is it possible to put a Real Amp Head 5150 in the FXLoop and just using the Axe cabs for recording Analog out or Re-amping? Guitar- Axe FX In- Gate block-Drive block-FXL(5150)Input 2-Cab block - Interface
  9. Ironwill

    ON the jump to KPA maybe

    Hey guys, after 2 Years having my Axe Fx II (I sold even my lovely Peavey 5150 sig. Head for it back then) iam more than happy hehe, I can create and get killer metal tones out of it, firmware 18.12 is amazing!! Iam still interested to ADD a Kemper to my setup as well now, curious to give it a...
  10. Ironwill

    Axe FX II Latency

    hello, I have a question, I do Reamp with my Axe FX II over Interface XLR- Axe-AES -Interface , I get latency of 0.99ms on the reamped track which I compansate with Pro Tools HW Insert delay, that works fine. Do latency from the Axe FX change with different Presets,different...
  11. Ironwill

    Where to find “Preset + User Cab”,any infos?

    Where I find and use this new feature? Didn't work the normal way here when export a Preset, please explain, no infos in Axe-Edit help i see.. 8.11 This release supports a new preset dump format known as “Preset + User Cab”. This format dumps the preset plus any User Cab IRs used in the...
  12. Ironwill

    What Link in the Stereo cab block means?

    Can someone please tell me, I cant find these parameter explained anywhere..
  13. Ironwill

    Help Tone-Match Alg. Time?

    Will do a Tone-Match session tomorrow, Do I have to care about the TM Alg. Time setting to get the best possible result, by default it's on 3,5 s, should I Increase it to the Max rather? I'll tonematch OFFLINE , the reference audio is a guitar track from an album. Would be good to find...
  14. Ironwill

    Tone-matching question

    How much the guitar pickup affect the tonematch of a isolated guitar track (Recording) in the case I'd switch my Pu in the guitar, do the sound would change drastic to the original track? Any experience using it with different guitars? Only have Emg 81's in my axes so i cant compare at the...
  15. Ironwill

    Re-amping Which way best in this case??!

    Hey, on re-amping over the Axe FX II and external Interface which is the better way you think? I know some of you prefer the digital way send the DI to the Axe via AES/Sdif. So far I choosed the analog path XLR to Axe Rear Input 1(bal.) for my DI's. Anyone have experience IF it would be...
  16. Ironwill

    5153 Red FW 18.08 Sat?

    Is it normal that the Saturation switch is set to OFF in FW 18.08 as defaults setting, not ON(authentic), just asking ?? The 5153 RED sounds amazing!!!!
  17. Ironwill

    Axefx II AES recording 48khz (32bit float)?

    What can I expect of recording with the Axe fx as master clock AES in a 48khz 32 bit float session? Anyone have experience, will it sound bad that way if its not synched to 24 Bit? Iam very interested in.
  18. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    Hey, I have a big Issues since Iam on 18.7, I have cracklings and clicks in my recordings, it actually sounds like a clock issue, did something changed there with the Update? i use AES, Axe FX is master for sure. It's not clipping internal in the Axe-fx stages.
  19. Ironwill

    5150 question to Cliff

    Hey Cliff do your Peavey 5150 have any modifications like a Bias mod or so that make it sound warmer and better? I assume it is your amplifier modelled in the Axe-Fx 2? I have to say, to me it sound more improved and real in 18! Thx for that, love to use it in my presets.
  20. Ironwill

    How achieve the the EVH 5150 III Stealth Tone?

    Hey guys , where would you start, can I achieve the the EVH 5150 III Stealth Tone or my own S tone? With Modifications, I want to achieve some kind the channel 3 increased High-Gain sound. Just wanted to discuss about it and find a few answers, I'm in general a very simple Amp and Axe-fx II...
  21. Ironwill

    Someone would help me out, Krank Texas Heat IR?

    Hello, is there someone owned CabLab and would kindly convert 2 Redwirez Krank Texas Heat cab IRs I have for me please? Waves to UltraRes
  22. Ironwill

    Clicks and cracklings after go for Fw 18.03 AES/EBU [SOLVED]

    Hello, today I loaded FW 18 to my Axe Fx II, now I getting clicks and clackles on my recorded tracks through AES to my HD I/O.. I set the clock source right, my Axe is master, I only know this clicks from setting the clock wrong in the past. What can i do now, what changed with the Axe FX clock...
  23. Ironwill

    Axe fx Preamps EQ points?

    what are the Preamp Low,Mid and High EQ frequency points actually? I wish some more official infos about the classic Pre's of the cab block, some general advise, tips how to adjust them the best way would very good to me, thx For sure so far i go by ear and use the PEQ after the cab block...
  24. Ironwill

    Axe fx II DI clipping, distortion

    Hey, started recording my DI's through AES/ebu from the Axe fx II, I noticed some little clipping, distortion when playing very hard riffs in the strings, I already checked my levels, Axe Input and recoding level, all fine and definitely not in the area of the Red and digital clipping. It s more...
  25. Ironwill

    Load FW 17.4 preset on Axe fx With Fw 17.2?

    can i do this, or do i loose something in the tone of my preset?
  26. Ironwill

    Axe-fx II Preamps, what are your favorites on High Gain presets?

    Hey, how's it working for you with the Axe-fx II Preamps in the cab block, what are your favorite Preamp's, channels on High Gain guitars in your presets? Maybe share some settings you like on them in general. Would be awesome to hear and see from you! \m/ My favs soo far: Modern Drive 3.10...
  27. Ironwill

    Preamp simulations how much SAT?

    Hey, I've wonder about how much SAT in the Cab preamp simulations you guys like to use, what would you suggest is a good amount!? "The Sat parameter controls the ratio of even/odd harmonics." I usually added around 1-2, gave a sweet touch at the sims i use. Didn't found time to try all of...
  28. Ironwill

    Need help, AXe fx II AES/ebu to Avid HD I/O crackling

    Hey anyone can help me, I got a new Avid PT 11 HD bundle a few days a ago, now I having a big problem with set it up right and crackling while tracking.:( I use a mogami cable from Axe fx II AES output to my HD I/O Aes input. I set everything to 48khz for sure. Should the I/O be master because...
  29. Ironwill

    Axe fx II and OSX Yosemite?

    Are all Software Fractal Bot, Axe-Edit be compatible to OSX Yosemite actually?
  30. Ironwill

    Capturing a IR

    I capture a IR of a analog gear with my Axe fx Ii IR cap, do this look normal?
  31. Ironwill

    Mute Axe direct monitoring anyhow?

    Is it possible to mute the Axe fx direct monitoring in Pro Tools 11 when use the Axe as Interface? I Want to hear only the processed audio what come back from PT to Axe, to can hear how plugins affect my guitar tone on the recorded track
  32. Ironwill

    What's improved on the new intelligent noise gate?

    GTE Input 2 not work?! I have noticed at the GTE, when using the GTE block after the FXL and set this to Input 2, it not work, only when select Input 1?!
  33. Ironwill

    Still having noise problem with Preamp in the Fxloop

    I still having a problem with a bad noise from my API Preamp or Input 1 and 2 when connected, i've found out that the noise is when the API is ON and also when the Preamp is off and just connected, cables are balanced XLR-TRS, i don't know what to do anymore.. It's gone when disconnect the cable.
  34. Ironwill

    Axe FX II with Avid HD Native IO

    Does anyone here use his Axe fx II through a Avid HD native system, Omni or 8x8x8 IO?
  35. Ironwill

    Reamp DI Track Front Input

    Hey when I want to reamp a DI track from my Interface through the Axe -fx, do I need a reamp box (Radial X-amp) before the Axe Inst. front Input?? Or is it alright to go straight from the Interface line level in to the Front Input or rather Rear Input, (Not a low level Axe fx DI track!)...
  36. Ironwill

    Axe-fx II Crystal Echos

    Little test track of me, I was trying out the factory Crystal Echos preset :-) I know the lead is not played perfect there
  37. Ironwill

    Outboard gear Input 1 A/D Level

    I have a question, on Interfaces like the AVID 16x16 etc. I can't adjust the Level of the Analog input signal going to the converter, on the Axe fx II I have, so where's the sweet spot on the Input Level control in % I should set when want to adjust what's coming in at the Output Level from an...
  38. Ironwill

    Input 1 Rear static noise normal?

    Is it normal that I getting a lot more static noise at Input 1 on the back than insert my preamp to Input 2 with the fxloop?
  39. Ironwill

    Axe-Fx 2 AD DA Conversion, Outboard gear

    A few Axe-Fx II facts I have found tell me not much about A/D D/A, didn't find matching infos for Analog Input 2 too 1. Dynamic Range: > 110 dB (more ???) 2. Crosstalk: < -60 dB over full bandwidth (less???) 3. -dB SNR in the Axe? 4. What is recommended to set IN level "Signal to...
  40. Ironwill

    Axe-FX II and Mbox 3 Pro, experience anyone?

    Hey, have anyone of you a Mbox 3 Pro Interface feeded by the Axe-FX II, what are your experience when it comes to recording quality with it, would you favor that path before record with the Axe USB, iam not sure if I should go for it at all.
  41. Ironwill

    What USB cable do you favor for Axe-fx II?

    Are there a specific high quality USB cable anyone of you use for recording with the Axe, possible to hearing a difference at that part? Iam just very interested about it.
  42. Ironwill

    USB/Digi SDIF outputs, same time?

    Is it possible to recording with the Axe-fx II USB and monitor through S/DIF Out??
  43. Ironwill

    Axe-fx II Headphone/mix

    Hey, 1. who of you using the Axe -fx II with Sennheiser HD 650 headphones? 2. Would you suggest mixing a session through the Axe fx as Playback Engine with headphones? 3. Should I care for Ohm mismatch there, Axe headphone output 600 OHM/ Sennheiser HD 650 300 OHm( headphone amp...
  44. Ironwill

    Axe-Fx II Update 15.07 Is it work like a charm?

    Who of you updated to 15.07 so far,are there any known bugs already I have to care about then updating to it from 15.02?
  45. Ironwill

    Recording with Axe-Fx II USB Pro Tools 10 help w/ Direct sound

    Hello, iam recording USB with my Axe-fx II in Pro Tools 10, everything works fine by selecting the Left or Right for tracking Mono, my big problem at the moment is how to set the Axe I/O and my present yet when I have 1 mono processed path and 1 Clean DI mono path in my preset go to Output 1...
  46. Ironwill

    PVH 6160 II (Peavey 6505+) Pre and post, Drive and MV?

    Hey the PVH 6160 II(Peavey 6505+) model in the Axe-fx II, Is Pre and post on the real amp, Drive and MV in my Axe? It sounds amazing in FW 15!! Slight better than the 5150 model to me. What are your favorite settings at it for high-gain presets,tones there? Would be very great to hear! \m/
  47. Ironwill

    Ultra Res Cabs FW 15.02?

    Hey guys do the new cabs with the fw 15.02 are already all Ultra Res ?? Or i have to load the samples in the fw zip file extra?
  48. Ironwill

    Evh 5153 Red MV and Pres

    I know and i also go by ear in the end, but iam very interested in how the parameters affect the tone too thats why asking here again. 1. Is it still the range of the gain taper in Firmware 15 and also for the EVH 5153 Red? Axewiki. "The range of the gain taper in the Axe-Fx is 0-10. Volume...
  49. Ironwill

    BRIT 800 (based on Marshall JCM800 model 2204) make it sound like a 2205?

    Is it viable to make the 2204 model in the Axe-fx II sound like a Marshall JCM 800 2205 with changes in the advanced amp block parameters?
  50. Ironwill

    Metallica RAR 2014 Axe-fx II?!!

    Hey just watching Metallica on tv playing at Rock am Ring 2014 in Germany, sadly iam not there. they use the Axe fx II actual right? Sounds awesome what i hear! :-)
  51. Ironwill

    Compensate Output 2 level

    If the output 2 level is -10 dB consumer level, make it sense to compensate the level to +4dB line level anyhow? (output 2 FXL, TS cable to preamp's XLR input)
  52. Ironwill

    What poweramp for capturing cab IR's and monitor?

    Hello Fractal users, what neutral solide state poweramp you can suggest me for capturing cab IR's and go for monitoring a 4x12 cab? I look and plan to buy one for both situations in general. Matrix?!
  53. Ironwill

    Drive block Input Sound change?

    I know the default Input in the Drive block is L+R, mine was always set to Left in my main preset, since i have my Axe-Fx II i think, now when i switch to L+R Input select the tone sounds different at any event to me, why there is a sound change actually? I have just a GTE block before the...
  54. Ironwill

    EVH 5153 sim. Bias Mod add Warmth

    With which parameter in the amp block (EVH 5153) i can simulate a Bias Mod, to get more Warmth or Cold tone from the head? You know were to tweak this? :-)
  55. Ironwill

    Amp block SPKR Page/Damping where's the magic behind?

    Hey guys i tried a bit more the SPKR Page (Speaker impedance, Frequency Resonance, Transformer) and Damping controls, of course read the manual notes to this, but i don't get it anyhow, is this something you use always in your presets?! Or a must, i always let it by default because i wanted my...
  56. Ironwill

    Help, connecting Axe-fx II to Preamp w/Output 2 unbalanced

    Hey guys i want to connect my Axe-fx II to a Preamp out of Output 2 unbalanced (Summed L+R Mono) to the preamp Line input balanced, can i go for a TRS 1/4 to XLR balanced cable without destroy anything on the preamp and my Axe Fx? Rather should i use a TS unbalanced cable to the Preamp Front D.I...
  57. Ironwill

    Are the DI signal good enough?

    You know how good the Axe DI tracking is against other DI boxes, are they good enough to use it for a different device in the case a Mixing Engineer want it additional to reamp later? I saw that my DI track i get from my Axe fx have less dB on the DAW meters than some Dry's from a other Axe user...
  58. Ironwill

    Insert a analog Preamp FX Send/Return

    At what i have to look at and take care by insert a analog preamp in the grid end, with Fx send/ Return ? ( cables, impedance, levels etc,)
  59. Ironwill

    Axe-Fx II vs Digidesign 192 converters

    Anybody have knowledge about what have the better high quality converters in it,Axe-Fx II vs Digidesign 192? Is it possible to compare these two actually? Very, very interested in it!! :wink-new: Axe FX II run with Cirrus Logic converters i've read, is there better quality in a Digidesign..
  60. Ironwill

    Recording straight USB buffer size?

    What is the suggested USB buffer size in the Axe-Fx II when record straight? Default setting is at 1024, (iam on Mavericks OSX) With which size i get the best result? Anybody have experience at it?
  61. Ironwill

    Cab block Input, what i have to set?

    What to set in the Cab block Input Select feature? I have a amp block then a PEQ before the single cab. I think it wasn't there at fw 12, now in 14 i don't know anyhow which choice is the best Stereo, Left, Right, L+R Summed.. How was the default in FW 12? :? It already confused me at...
  62. Ironwill

    Recording DI's/ Dry tracks USB right?

    What way for recording DI's/ Dry tracks right? Hey Fractal users out there, How you guys record your Dry tracks at the Axe Fx II direct? I actually run my DI's Mono always, set the Axe output 1 Left and Right Summed at any event for recording, track "Front center" dry input on a mono...
  63. Ironwill

    Do Amp block modeling parameters change straight after update to 14?

    Do the Amp block parameters and sound of my old presets on my Axe-FX after the update from 12 to 14 change straight?? when not (reselect/ select) the amp again, that the new amp modeling values are load! Corrupt working presets then?
  64. Ironwill

    Are the cab block level affect the sound?

    Somebody can tell me if the level in the cab block affects the sound actually, lower level in the amp a bit and increase the cab level, i thought or noticed i heard a difference at it, anybody can confirm this, is this right?
  65. Ironwill

    What changed in the EvH 5153 in FW14

    Hey,are here someone can tell me in detail what changed in FW14 at the EvH 5153 RED amp model? I went from FW 12.02 to 14 now, using the 5153 RED in my preset, it sound really stronger, tighter after the update, it's amazing! Yes i done "update all presets", re-selected and select the amp...
  66. Ironwill

    Preamp block viable?

    "Hey how about a preamp block with a Neve 1073 sim etc. in the Axe fx 2? I see there are many people run their Axe analog to a Pre before they go in their system and DAW in general, so why not bring that to the grid for users recording straight USB or also XLR out of box? Just a idea, what you...
  67. Ironwill

    Help with USB Status?!

    Hey FRactal pro's, What's the best USB buffer size i should set for recording with my Axe Fx II, i know actually the recommended is 64 samples,have delays while tracking, so i mute the actual track i record every time, to avoid it haha I am on Mavericks at my Mac now, just updated it. Well, i...
  68. Ironwill

    export complete preset with cab?

    Hey guys, is it possible to export my preset with the cab block, that a other one can load my preset and my cab together at his Axe fx 2, when he don't have my cab in his user cabs list? :?
  69. Ironwill

    Is this capture a Bogner or Engl cab?

    Is this capture a Bogner or Engl cab? 4x12 German V30 (RW) Based on a Bogner or ENGL Pro 4x12 cabinet loaded with four Celestion Vintage 30s.
  70. Ironwill

    EVH 5150 III How to set?

    Can anybody tell me, when i let all knobs (BOOST,COMP, CUT,FAT, Bright,SAT, HICUT, DEPTH and all over possibilities) how they are set standard at the amp section up to Gain,Low,Mid, high, volume and presence , do it emulate the real EVH 5150 III amp factory tone?
  71. Ironwill

    Mesa 4x12 Stiletto, Traditional Straight cab?

    Hello, anybody know if the 4x12 Recto V30 (OH)Based on: Mesa Boogie Rectifier 4x12 with Celestion Vintage 30s. at the axe effects 2 is a Mesa 4x12 Stiletto, Traditional Straight cab actually?
  72. Ironwill

    Mic sim. when use IR capture

    DO i need a mic sim. in my line when i use a cabinet IR capture of my own actually? Or there are no advises to use NONE mic after the cab section, does it makes scene? :?
  73. Ironwill

    EVH 5153 100 watt or 50 watt?

    Can anybody answer me if the EVH 5153 head on my axe fx 2 is based on a 100 watt or 50 watt amp,or a mix of both?
Back
Top Bottom