Search results for query: *

  1. Ironwill

    Possible to convert a Ultra Res IR to Wave file?

    So the wave above looks wrong to you and encrypted , for a cab Sine track ?
  2. Ironwill

    Possible to convert a Ultra Res IR to Wave file?

    No one knows? Can jump in for helping please
  3. Ironwill

    Amp Speaker Page matched to cab?

    How will the Oversize Mesa cab alter Frequency response of the Speakers (Greenbacks)then and Impedance curve, I don't get it fully But nice to see the discussion and great suggestions to make IR's easier to dial in/match for users with the Axe maybe in future. Sure most important is what I...
  4. Ironwill

    Amp Speaker Page matched to cab?

    Ah alright, Thx I didn't know that hehe
  5. Ironwill

    Amp Speaker Page matched to cab?

    How to read/ translate a cabs frequency response ON a graph, which points I should pick to use in Axe Amp page? It's a Mesa 4x12 Oversize Cab with Celestion Greenbacks
  6. Ironwill

    Possible to convert a Ultra Res IR to Wave file?

    Anyone here who know what to do and can (deconvolve)or so the cab file for me please? Or does this is impossible-- and looks wrong in the pic how I tried to capture my Axe cab there??
  7. Ironwill

    Possible to convert a Ultra Res IR to Wave file?

    Someone of you can explain me making the IR fine or help me out how process a recorded Wave after created with a sine sweep through the cab ?:-/ I just don't know what to do now to get it a usual IR Wave, I'd made the sine tracks in different lengths and exported them Mono 44.1khz and 48 khz in...
  8. Ironwill

    Possible to convert a Ultra Res IR to Wave file?

    Hey guys, Would it be possible to convert a UR IR I've got from a friends cab to a Wave file actually?
  9. Ironwill

    EVH 5153 Red and Mesa Cab FW19B2, Avalerion - Into The Wild Remix/Master

    Updated the clip, had a few more touches on it and guitars,
  10. Ironwill

    Amp Speaker Page matched to cab?

    A answer on this would be neat..yes
  11. Ironwill

    Guide: Re-Amping with external sound card/audio interface

    Re-amping by sending the DI back to the Axe via AES works now or ?
  12. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    Damn Cliff my EVH 5150 mk3 never sounded better than in 19 now, best MV Sweet spot I found and High Gain, Drive 6, Mvolume .. Wait for it.... 2.9 ! Never thought I would lower it so much, and with the new Drives,the TS808 before the amp, it gets very big and heavy at any event.
  13. Ironwill

    Tonematch convert to Cab IR help

    Hey , I want to do a tone match of a recorded Track/ Tone of me where I used my favourite Marshall Cab IR in the Axe fx signal chain, my mic preamp and EQ Plugin for filtering on the Track in Pro tools, so I processed it. - When i tone match this and convert the result to Ultra Res IR is it...
  14. Ironwill

    Amp Speaker Page matched to cab?

    Iam lost with the Amp Block speaker setting to getting the realest result match to my Cab IR. Amp EVH 5150 Mk3 , default its matched to the EVH 4x12cab right? Now when using it with my Mesa 4x12 IR, to me it feels not the best Low end, highs, how I can archieve the most real setting there, It...
  15. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    Yeah most likely, was joking anyway
  16. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    Thanks for jumping in with that Yek! I understand. So it would be possible to calculate with deep amp knowledge at least haha Would the chart mentioned translate the real 5150 III Master too in this case perhaps? Its also a fender amp,
  17. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    Hey, I remember a chart for Axe MV and real fender amp anywhere on the Fractal platform, is something like this senseless? Why every amp having the same MV Taper actually, is it also a physically reason behind and Axe modeling algorithms, or just too crazy imply a internal designed MV para for...
  18. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    M Would mean you can't translate the default value on the MV to the real amp or a certain spot because it depends on the Drive setting before,
  19. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    What was your sweet spot you choosed there for the Red channel defaults " 4" on the real Amp then? Would be interesting
  20. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    Alrighty,nice to hear from you, thx a lot Cliff!!
  21. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    Thank you for the kind advise's how to dial in, Iam not trying to match anything actually, it was just curiosity at all! Very bad asked maybe.. and to mention my favorite Axe Amp, well , was more about the new G3 technology and how precise is that with the pots. :-P Doesn't matter right..
  22. Ironwill

    How precise is the Axe 5153 Red to the real amp?

    How precise is the Axe fx II 5153 Red parameters of Drive, Presence and MasterVolume in FW 19 to the real amp actually, are they different at same positions??
  23. Ironwill

    EVH 5153 Red and Mesa Cab FW19B2, Avalerion - Into The Wild Remix/Master

    EVH 5153 Red/Mesa 4x12 Greenbacks Cab FW19B2, Avalerion - Into The Wild Remix/Master Thats a song I've done as Mix practice, Guitars and Bass are Re-amped with my Axe Fx II. Hope It's not too bad for your gentle ears
  24. Ironwill

    Commercial recording made with Axe-FX II?

    https://m.youtube.com/watch?v=g7Yw1jYMptI \m/
  25. Ironwill

    Mic sim on factory cabs?

    Alrighty! Thx, Didnt even thought about the wiki cab list.. Oh yes. I will check this!
  26. Ironwill

    Mic sim on factory cabs?

    Hey, when select a factory cab is it suggested to use a Mic sim also? Or for example at the New Mesa Mix 4x12 cab, should I go for a Mic in this case, how is it captured when not select a mic , with a flat one?? Would be great to know.
  27. Ironwill

    Axe-Fx II Firmware 19.00 Public Beta #2

    I noticed that I just don't have the pressure when hitting, pick the strings anymore, too dynamic kinda
  28. Ironwill

    Axe-Fx II Firmware 19.00 Public Beta #2

    Then in my Re-amped track, same preset, Update amp defaults only ,19 sounds better more AIR in the Highs and Grrr in the lower notes, I think I need to spend some time again with the new fw
  29. Ironwill

    Axe-Fx II Firmware 19.00 Public Beta #2

    I think Iam the only one didn't like 19, it feels and reacts complete different as 18, "Clarity" i didnt found anyway..think I go back for the First Time ever sry to say But I give it a few more hours of tweaking tomorrow
  30. Ironwill

    Axe-Fx II Firmware 19.00 Public Beta #2

    Just asking, doesn't play a big roll to me, I noticed a great change in 18 in this case with my High-Gain settings , already felt better and realer with lower MV setting, used a lot more of it before to get my tone.
  31. Ironwill

    Axe-Fx II Firmware 19.00 Public Beta #2

    Cant wait for the official release of 19.00 and the new drives!!!! Drives me crazy Hey I always thought about, are there a comparison clip of Cliffs real 5150 and Axe? For example. And I have a question about the Amp Drive, Presence and MV Parameters how accurate they are to,same as the...
  32. Ironwill

    Miss May I - Apologies Are For The Weak (Cover-Remix-Master Practice) All Axe-Fx II

    Hello, I had some fast fun with Re-amping and a Cover song of "Miss May I". Found the DI's and Midi of this Track for Mixing Practice, Not finished this Remix and Master so far. And already noticed few things (Drive and Phases) need to be corrected, most likely a little too much Drive or...
  33. Ironwill

    Axe-Fx II Firmware 19.00 Public Beta #2

    Hey can someone explain how this kinda looks with Amp+Cab feature? Will there be Pro packs available where the amp and cab are tone matched to a real setup or is it just meant for easier saving,sharing Amp+Cab ??!
  34. Ironwill

    Real Amp Head in the FXLoop, possible?

    Ah that I assumed, thanks for the info. So it's never possible to Loop a real Head very accurate in the Axe. I think maybe it not worth it for me apart from it would be a amp we not have already in the box. But when the the frequencies are difference with a load box doesn't mean it sound wrong...
  35. Ironwill

    Real Amp Head in the FXLoop, possible?

    But it's not only the Impedance setting their then right? Amp 8OHM- Load Box 8 OHM for example, it's also the Frequency response of a real cab reacting to the amp which I loose if I understand correctly. That's why finding the right frequency response to the cab IR in Axe Amps speaker page can...
  36. Ironwill

    Real Amp Head in the FXLoop, possible?

    The suhr reactive box does Look fine, but do it have cab sims on.. I don't know
  37. Ironwill

    Real Amp Head in the FXLoop, possible?

    Thanks for all the infos, I was thinking about getting a Mesa Cabclone/use the Line Out with Cab sim OFF -> Axe FX That it most likely react different then, what this mean? In Tone, Dynamics, general sound..? I assume it will sound pretty good still, I hope actually
  38. Ironwill

    Real Amp Head in the FXLoop, possible?

    Going the route with a load box and back to the Axe FX do it really reacts different the Amp Head?
  39. Ironwill

    Real Amp Head in the FXLoop, possible?

    Alright, how that a box looks, someone already tried or have experience at that?
  40. Ironwill

    Real Amp Head in the FXLoop, possible?

    Hey, is it possible to put a Real Amp Head 5150 in the FXLoop and just using the Axe cabs for recording Analog out or Re-amping? Guitar- Axe FX In- Gate block-Drive block-FXL(5150)Input 2-Cab block - Interface
  41. Ironwill

    ON the jump to KPA maybe

    Thx man, I will keep this in mind if I testing them in comparision.
  42. Ironwill

    ON the jump to KPA maybe

    Come on, you are one of the idiots everyone talking about on the net I see, are you so bored or a bad comedian on Fractal forum? I will not discuss every comment of you to my post thats sure, no fun, I could but no time for such a shit
  43. Ironwill

    ON the jump to KPA maybe

    Why is looking for User experience about comparing the Fractal Axe latest firmware to KPA OFF Topic?! That's strict, well.. do we fear the (Enemy ) here.. sucks a bit
  44. Ironwill

    ON the jump to KPA maybe

    Thanks for your sharing your experience mister, yes the price's are not cheap, main reason is Iam looking for some amp sounds we don't have in the Axe and for sure want to try something new too, I will see. Interested in how's the new KPA firmware against Axe 18/19.
  45. Ironwill

    ON the jump to KPA maybe

    Yes, maybe I should go for a Trial.KPA's features looking already limited to me
  46. Ironwill

    ON the jump to KPA maybe

    Hey guys, after 2 Years having my Axe Fx II (I sold even my lovely Peavey 5150 sig. Head for it back then) iam more than happy hehe, I can create and get killer metal tones out of it, firmware 18.12 is amazing!! Iam still interested to ADD a Kemper to my setup as well now, curious to give it a...
  47. Ironwill

    Firmware forecast?

    A heavy and angry Peavey Triple X would be amazing in my libruary
  48. Ironwill

    Axe FX II Latency

    Thanks guys, With PT HW delay It s so nice, sometimes use a mic-Preamp between so USB is no option anymore for me, having a external HD interface as well now. I was just interested if some internal things can create more latency in some case.
  49. Ironwill

    Axe FX II Latency

    hello, I have a question, I do Reamp with my Axe FX II over Interface XLR- Axe-AES -Interface , I get latency of 0.99ms on the reamped track which I compansate with Pro Tools HW Insert delay, that works fine. Do latency from the Axe FX change with different Presets,different...
  50. Ironwill

    Where to find “Preset + User Cab”,any infos?

    Oh alrighty, thx didn't know, Iam stoked about this new feature!!
  51. Ironwill

    Where to find “Preset + User Cab”,any infos?

    Where I find and use this new feature? Didn't work the normal way here when export a Preset, please explain, no infos in Axe-Edit help i see.. 8.11 This release supports a new preset dump format known as “Preset + User Cab”. This format dumps the preset plus any User Cab IRs used in the...
  52. Ironwill

    What Link in the Stereo cab block means?

    I have choosed two different IR's in the Cab Left and Right, panned Hard L&R and use a little delay on the R cab and the Low cut at 60 Hz, what you recommend to set? I don't get exactly, Linked would make no ense when I set a delay on the R cab then or?
  53. Ironwill

    What Link in the Stereo cab block means?

    Can someone please tell me, I cant find these parameter explained anywhere..
  54. Ironwill

    Help Tone-Match Alg. Time?

    Will do a Tone-Match session tomorrow, Do I have to care about the TM Alg. Time setting to get the best possible result, by default it's on 3,5 s, should I Increase it to the Max rather? I'll tonematch OFFLINE , the reference audio is a guitar track from an album. Would be good to find...
  55. Ironwill

    Tone-matching question

    How much the guitar pickup affect the tonematch of a isolated guitar track (Recording) in the case I'd switch my Pu in the guitar, do the sound would change drastic to the original track? Any experience using it with different guitars? Only have Emg 81's in my axes so i cant compare at the...
  56. Ironwill

    Re-amping Which way best in this case??!

    Alrighty, thanks for share your experience mister! To stay digital would be a option maybe for me over AES, I will look. What would be interesting is , the Axe Front Inst In is unbalanced.. Should I send my DI out XLR/TRS balanced to the front Input then, just to maybe have the benefit of the...
  57. Ironwill

    Re-amping Which way best in this case??!

    ;-) I tried AES/ebu and XLR Rear Input 1 for sending the DI, I don't hear any noticeable difference actually. Only wonder about the third way over a Re-amp box to the Axe Inst. IN , I assume a Re-amp box shapes the signal most likely a little. mmm I got a fine HD I/O lately so iam not have to...
  58. Ironwill

    Re-amping Which way best in this case??!

    Hey, on re-amping over the Axe FX II and external Interface which is the better way you think? I know some of you prefer the digital way send the DI to the Axe via AES/Sdif. So far I choosed the analog path XLR to Axe Rear Input 1(bal.) for my DI's. Anyone have experience IF it would be...
  59. Ironwill

    5153 Red FW 18.08 Sat?

    Alrighty, thanks mister!
  60. Ironwill

    5153 Red FW 18.08 Sat?

    Is it normal that the Saturation switch is set to OFF in FW 18.08 as defaults setting, not ON(authentic), just asking ?? The 5153 RED sounds amazing!!!!
  61. Ironwill

    Axefx II AES recording 48khz (32bit float)?

    For those who are interested, that's the kind detailed answer I've got from AVID Support as well: "From the HD I/O guide: HD I/O features 24-bit analog-to-digital (A/D) and digital-to-analog (D/A) converters. So you are correct that the 32-bit floating point comes into play when clips are...
  62. Ironwill

    Axefx II AES recording 48khz (32bit float)?

    OK, the Shade of difference I hear is most likely in my head ?! Alrighty, so I don't have to care about switch to 24 bits in PT session when recording, just stay on 32 Bit depth float (Pro Tools converting on the fly) and it shouldn't make a difference when record with the Axe fx 24 bit...
  63. Ironwill

    Axefx II AES recording 48khz (32bit float)?

    Okay, I just tried, started my session 48khz 32 Bits float engine. I compared recording with 32 bits and switch in the the session setting window to 24 bits, I can hear a very slight difference. The 24 bit recorded clip sound a little more detailed, wider and warmer to me, but its not a big...
  64. Ironwill

    Axefx II AES recording 48khz (32bit float)?

    Ah alright sounds like a good way, thx How I understand, Recording At 48 khz 24 bits and mixing and processing I just switch over to 32 bits in the session right? When record on 32Bits, you think this will bring any problems or tone altering,shifts? I definitely need to try later.
  65. Ironwill

    Axefx II AES recording 48khz (32bit float)?

    What can I expect of recording with the Axe fx as master clock AES in a 48khz 32 bit float session? Anyone have experience, will it sound bad that way if its not synched to 24 Bit? Iam very interested in.
  66. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    Axe FX II Word Clock AUTO AES HD I/O Clock Source AES/EBU (Axe-fx II) that should be fine actually.
  67. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    I will check every Part of my setup again later, from Guitar batterie up to AEs cable at any event. Will audible clicks, crackle over AES recording always be a hardware issue? So never made by software?
  68. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    Are here some other AES users experienced issues?
  69. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    Oh alrighty, is it programmable over the new fw's now or a new hardware settingPart of the XL's? I don't know then, I not assume that my AES connection or cable is broken, when you say it's hardware related. Only know that my Interface sync after the Axe FX II master, the signals are digital so...
  70. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    Too bad to hear that mister, Analog out's would a alternative, but I likes to track my DI's AES before Analog reamping. What changed actually in the Axe-fxII Clock, I mean there was a change in 18 right, also in the menu?!
  71. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    I think i noticed some rare crackles already after 17.04 to 18.00, but I just played and tweaked presets here and there, now after the whole process of updates, so the last one was 18.06 before .07 I started with recording and writing yesterday again in PT. I just thought my Interface wasn't...
  72. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    No it's not cpu, 38-40 %
  73. Ironwill

    Crackle and clicks over AES since Upgrade 18.7

    Hey, I have a big Issues since Iam on 18.7, I have cracklings and clicks in my recordings, it actually sounds like a clock issue, did something changed there with the Update? i use AES, Axe FX is master for sure. It's not clipping internal in the Axe-fx stages.
  74. Ironwill

    Bug? Possible bug since fw18.07 (scooped sound with Recto)

    I said I just updated amp Block,no adjusted,so to me it sound way far from a good tone as well. I see there changed High cut to Presence in the Recto. Not sure where's the problem
  75. Ironwill

    Bug? Possible bug since fw18.07 (scooped sound with Recto)

    Alright, yeah you can try. Iam only Talking about amp block paras. only for sure.
  76. Ironwill

    Bug? Possible bug since fw18.07 (scooped sound with Recto)

    Are you using the Amp Block advanced settings a lot ? Maybe thats why the imported preset sound pretty different in the new Firmware because of changed internal values in the Amp, I just assume if it's no bug
  77. Ironwill

    Bug? Possible bug since fw18.07 (scooped sound with Recto)

    I meant always when I import a old FW preset or after a Upgrade I do "Update amp defaults" on my Main presets, Like you can hear in my clip above ,It perhaps helps. Always worked like a charm when go for this way. But my presets are fine, so maybe there's something wrong with your preset file...
  78. Ironwill

    Bug? Possible bug since fw18.07 (scooped sound with Recto)

    Didn't you updated amp defaults(updatead Advanced parameters to new fw)? For sure when you tweaked there you loose the settings.
  79. Ironwill

    Bug? Possible bug since fw18.07 (scooped sound with Recto)

    Alrighty, I checked all my Firmware 17-18.06 Presets by Importing into Fw 18.7 with Axe Edit, they were all fine ! I also checked Algones's Preset and cab, it's the same Issue here, not sure why, corrupted Preset file? After I pressed (Utility) Update Amps defaults it sounds normal to me...
  80. Ironwill

    Bug? Possible bug since fw18.07 (scooped sound with Recto)

    Is it a difference which you would hear straight by comparing you think?
  81. Ironwill

    Bug? Possible bug since fw18.07 (scooped sound with Recto)

    Do I have to worry to load my old 17 Presets to 18 now? I mean when something would sound mid-scooped different to me after a Upgrade I always started to adjust my amp to the new firmware, I couldn't tell if it's a bug then or so, well perhaps I will compare them when Iam back home, new Preset...
  82. Ironwill

    Cab block preamps

    Alrighty to me the preamps make the sound even better! Perhaps there's more difference for you when go for a hot Input(increase with the Drive knob)but not up to 0VU for sure then lower the cab output level a few dB. Preamp Drive around 3, SAT 1-3 depends, for High Gain Presets it rocks to give...
  83. Ironwill

    Guide: Re-Amping with external sound card/audio interface

    Hey Sir, I tested today reamping my DI analog balanced to Axe-fx Rear vs sending it AES, when I look on the Wave and listen the DI's A/B (Reamped the analog DI back AES)I didn't noticed any difference here at all, I stay with the Analog way. Perhaps it's because the D/A converters are pretty...
  84. Ironwill

    Cab block preamps

    You're right, thanks for explain it again Sir ;) No studio preamp modeler especially for sure but a Interface at least, so good that we have this feature to sweet up things at the end of the chain in digital.
  85. Ironwill

    Cab block preamps

    I absolutely know and understand what you mean mister, How about tell us by using your experienced ears instead of the guessing internet example? Would be a challange, To me Modern maybe sounds like 1073, Transformer - API 3124 Hahaha Some of them acting pretty similar to my ears,for example...
  86. Ironwill

    Cab block preamps

    Last place I assume.. I really appreciate that he brought the Preamp,Tape Feature in the Axe-FX II in the end!
  87. Ironwill

    Cab block preamps

    That's why my last block is the cab on my grid, sometimes another PEQ or Filter after it when need a few last cuts in processing, then I record over AES digital, that way rocks! Yes it's more a additional feature simulate the way to the Interface, desk. Cliff choosed the Cab block as the right...
  88. Ironwill

    Cab block preamps

    Thats it for sure. I get it absolutly and understand your decision to bring this feature in the Axe-Fx without names. But one point I miss also, isn't the Axe-fx overall about modeling real amps etc, it's a little sad to not knowing what preamp image is used, would make it perhaps more exciting...
  89. Ironwill

    Axe-Fx II Firmware 18.07 Released

    I was misleaded by your post kind of I have to admit. Nah not see me there as well, I have a lot respect for the choosen Beta testers. For sure all users in the forum are part of the development-process when sharing their experience and ideas with the product. Thats epic in the FAS forum at any...
  90. Ironwill

    Look What Arrived Today

    Is it the Lucifer among the Boogies?
  91. Ironwill

    Axe-Fx II Firmware 18.07 Released

    Are you really Fire against Fractal Beta testers in kinda way as well? Not the right thread anyhow, how about write some comments in the Kemper Or AVID forum, then I don't have to read anymore. Why we don't get a Update plan you pay for month/year like the Avid mafia started with PT 12, that...
  92. Ironwill

    Axe-Fx II Firmware 18.07 Released

    Oh yeah, just noticed when switch them, pwramp hardness switch too. Good to know Thx. Am I blind i dont find Power tube types in the front panel, only in Axe-Edit?
  93. Ironwill

    Axe-Fx II Firmware 18.07 Released

    Cliff can I ask why there's also a change in the Amp Pwramp Hardness defaults to (3), the 5153 sounds amazing as well again but I always tend to set it to hard 5 again, not so in 18.00-.06 FW. Little note on that??
  94. Ironwill

    Axe-Fx II Firmware 18.07 Released

    Just updated from 18.06 to 18.07, damn the big sound is back, but also leads me to use the Amp poweramp hardness at 5 on the 5153 Red again anyhow, this update was a dramatic tone change for me, the 5153 default poweramp now is back to 3(med) as well instead of at 4 like in 18.04 .06. From the...
  95. Ironwill

    FW 18.06 - amps automatically set to power amp hardness of 4 instead of 3 (medium)

    I always setted it to 5 on the 5153 Red since FW 16/17 in my High Gain presets, it sounded and felt better to me, more like the lovely 15v I think it was, now in big 18 I changed and let it on 4,its really enough what it do to my tone in the new modeling, just said haha
  96. Ironwill

    FW 18.06 - amps automatically set to power amp hardness of 4 instead of 3 (medium)

    So at 4 is default value for most amps right?
  97. Ironwill

    New FW -do we have to re set the amps?

    But why isn't or is there a official suggestion with new Firmware Upgrades in the notes that mention if re-select amps or reset system Parameters that it work fine like the FW should, for example 17 to 18? How internal Fractal people upgrade or Cliff, just load new Firmware on the Axe-FX and all...
  98. Ironwill

    New FW -do we have to re set the amps?

    But why isn't or is there a official suggestion with new Firmware Upgrades in the notes that mention if re-select amps or reset system Parameters that it work fine like the FW should, for example 17 to 18? How internal Fractal people upgrade or Cliff, just load new Firmware on the Axe-FX and all...
Back
Top Bottom