Search results for query: *

  1. M

    Wish Set list midi support

    +1
  2. M

    Cruel noise problem

    Thanks Joe, Sixstring and Nicolasrivera, I have confirmed the noise problem is gone with changing the reverbe effect to Midium Room Spring type. Unfortunately to turn the density to 4 did not solve this in my environment. However, I think that isn`t this a kind of bug? Because I think we can...
  3. M

    Cruel noise problem

    Hi Paranoid, I have uploaded audio clips. One is normal preset sound of "Plexi 50w Jump - no noise.syx" without any noise. This can be downloaded from the following url. - no noise audio clip Another is noisy audio clip made from preset "Plexi 50w Jump - noise.syx". This can be downloaded...
  4. M

    Cruel noise problem

    Okay, but it's about 10 pm now in Japan. It's impossible to record because of late night. So, I will record it tomorrow if I can. And one more information on this. This problem may happen after pressing expression pedal to move tone. I'm not sure but any noise might not be heard immediate after...
  5. M

    Cruel noise problem

    Hi pauly, Thank you for the reply. Even though I removed that line as you did, I still observe the bad noise at output-1 and 2 regardless output-1 is not there any more. I usually use output-1 without cab block and send to 44 magunam power amp. Sometime I use studio monitor with output-2...
  6. M

    Cruel noise problem

    Hi All, I'm facing an issue on modification of my favorite preset that is crunch and lead plexi tone. The issue is that the modified preset has sounded cruel noise. As I wanted to add drive pedal on other scene of this preset, I just inserted the drive block before amp block. In the result, the...
  7. M

    S1/2 Momentary Switch Problem

    Thank you so much, Chiris.
  8. M

    S1/2 Momentary Switch Problem

    It became opposite behavior. Scene 1 is on when no step and scene 2 is on when I step on in case of correct behavior. However, scene 2 is always on when no step and scene 1 is on only when I step on in case of problem. Thanks.
  9. M

    S1/2 Momentary Switch Problem

    Thanks Chris, I have sent the preset which is seen this problem to your dorobox. Thanks again.
  10. M

    S1/2 Momentary Switch Problem

    Hello everyone, I'm facing a problem regarding the S1/2 foot switch set to momentary. It is available S1 on a foot switch set to S1/2 imediate after booting up or moving to this preset from other and available S2 while pushing it. It's right behavior as expected. However, once moving to other...
  11. M

    Anyone use their AX8 through a power amp/guitar speakers, or guitar amp fx return?

    I wish I can use FRFR environment because I think it will give me better tone even though current my tone of AX8 makes me happy. However, unfortunatly it does not allow me to do so as several issues makes me so.
  12. M

    Anyone use their AX8 through a power amp/guitar speakers, or guitar amp fx return?

    It's hard for me to give any advice for usage of iSP and AX8. My way to build the tone of AX8 is always to tweak any of AX8 parameters you think it's necessary with relying of your ears or to belive in them and finally to make sure it with enough loud volumn for your gigs.
  13. M

    Anyone use their AX8 through a power amp/guitar speakers, or guitar amp fx return?

    Oh, I've never tried amp modeling off with amp fx loop. I should do it since I like those experiments with my musical materials including a guitar and of course AX8. Thanks.
  14. M

    Anyone use their AX8 through a power amp/guitar speakers, or guitar amp fx return?

    To tell the truth, I don't test 44 magnum at the band rehearsal yet, even though I already tested iSP with AX8 at the band rehearsal. I went to the rehearsal studio alone and just tested 44 to make sure my created some tones of AX8 at musical studio with loud volumn. I set the level of 44 to 9...
  15. M

    Anyone use their AX8 through a power amp/guitar speakers, or guitar amp fx return?

    I use it with the bright switch off because I want to use all same presets with 44 and iSP. The bright switch makes those tone much brighter. However, if I use a guitar having less treble I might try it at the rehearsal instead of global EQ change. Regarding Marshall FX return with AX8, it's...
  16. M

    Anyone use their AX8 through a power amp/guitar speakers, or guitar amp fx return?

    I usually setup AX8 power amp sim on and cab sim off with my 44 magnum power amp and a cabinet put in the rehearsal studio or venue where our band plays. Though I have iSP Stealth Pro and VHT cabinet at home, 44 is smaller and almost same sound as iSP but little bit more treble. In the other...
  17. M

    Amp sound comparison

    I'm still trying to get better tone for solo use with AX8 and those power amp because I often have to use them at the venue or my environment where I usually play instead of FOH or FRFR. I believe it's possible because I had a favorit tone with Axe Ultra and almost same environment. Currently...
  18. M

    Amp sound comparison

    Hi Evol, I'm useing ISP Stealth Pro power amp and 44 magnum power amp with AX8. Since I always set power amp modeling on and cab modeling off with AX8 and those power amp, I have never tried cab modeling on in case using those power amp. I will try it because I would like to get better high...
  19. M

    Scene volume increase and decrease functionality

    Thanks for your reply. I got it.
  20. M

    The control of output 1/2 and scene change

    Yes, I'm currently using an expression pedal directly connected to AX-8 through a pedal jack in order to control the output volumn. However, if possible I wanted to use a footswitch like BOSS FS-6 instead of expression pedal because I think it is easier to fix the output level than expression...
  21. M

    Scene volume increase and decrease functionality

    Please let me ask you more detail because I would like to achieve similar function to what you achieve. Which configuration are you using in order to increase or decrease the scene volumn? Are you using "OUT 1 VOL INCR, OUT 1 VOL DECR" in I/O CONTROLLERS page with setting it to "PEDAL"? If so, I...
  22. M

    The control of output 1/2 and scene change

    Sorry for poor my English and letting you confused because I'm not a native speaker in English. Anyway, thanks your thought. My thought is that Global Menu like "OUT 1 (MAIN) VOLUME/ OUT 2 (FXSEND) VOLUME" decides the behavior of how it works and possible values are "PEDAL1", "PEDAL2" or CC...
  23. M

    The control of output 1/2 and scene change

    As you mentioned, Scene Revert is turned on. However, the result is same after it set to off. Besides, if I change the preset to other after changing the output volumn then back to the previous preset and scene, it returns the output volumn to the original level. It works only within the scene...
  24. M

    The control of output 1/2 and scene change

    SoftStep has many variety functions. I can choose several way of how it sends the value when the footswitch is released. The value 0 is sent when it was released or the value is stayed whenever it was released...etc. I configured second one to SoftStep. For example, I'm in scene 1 and get...
  25. M

    The control of output 1/2 and scene change

    Regarding the control of volumn with external switch, it suceeded to achieve by midi controller with sensor of pressure namely SoftStep. If the bottom to top pressure on the midi footswitch it increases the volumn of output while top to bottom pressure decreases it when configured I/O Ctrl...
  26. M

    The control of output 1/2 and scene change

    Regarding volumn control with external switch, I read some told it worths to use for volumn control with external switch in this forum, especially in case of band rehearsal or something like that. So I thought I would like to know how I can do it by myself too. I will look into the way of using...
  27. M

    The control of output 1/2 and scene change

    I know a footswitch can be used to chanIge scenes. Since I had a bad experience to make a mistake for changing a tone, from a backing to solo. I did not tap the footswitch rightly at that time. It forces to change the tone at very short time between backing and solo in that song I was playing...
  28. M

    The control of output 1/2 and scene change

    Thanks for a reply. Regarding scene change with an expression pedal, it's enough for just 2 scenes to me. Let's say I'm in scene 1, it moves scene 2 at maximum of pedal then moves scene 1 at minimum of pedal. However, I don't know how to send cc #34 and any values with an expression pedal...
  29. M

    The control of output 1/2 and scene change

    Hello guys, Please let me ask you two kinds of question regarding external switch and expression pedal. 1. Output 1/2 control with external switch. Even though now I'm using expression pedal to control the volumn of output 1 and 2 both, I would like to do it with external switch like a boss...
  30. M

    AX8 with tube amp

    It was first time for me to have a rehearsal with AX8 and a band at last Sunday. At that time, it sounded completely different from at my house regardless I built my tone with AX8 and power amp that was adviced here namely iSP STEALTH PRO. It sounded great in my room. I felt down a little...
  31. M

    Show Us Your AX8 Rig! (post your pics)

    Thanks for quick reply. I didn't know ISP Stealth Pro. I gonna check it out. Thanks again.
  32. M

    Show Us Your AX8 Rig! (post your pics)

    Hi Asphyx74, I'm from Japan. I'd like to ask you about "44" because I think it will be suitable for me with AX8. Though I don't receive AX8 yet, I already ordered and now I'm looking forward to it. And also I've been using Axe Ax Ultra and loving it. My asking is whether it's enough power with...
  33. M

    I got AX-8 and now I'm so happy with it.

    I got AX-8 and now I'm so happy with it.
  34. M

    ketil presets

    Hi Please let me take ketil presets. I watched the video on youtube. It's great. I like this. MrGuitarabuse, I gonna send you my email. can you please send those presets?
Back
Top Bottom