Search results for query: *

  1. HurdyGuigui

    Wish Looper block : Max loop time in ms

    Currently the max loop time in the looper block is only programmable in 0.1s steps . I would like to be able to set in in ms, or in 0.001s steps so that we can match it to the tempos we are using. Example : I am playing a 1 bar loop at 106 BPM, I want to set the max loop time so that when I...
  2. HurdyGuigui

    Bug? Looper clicking noise

    Sometime when using the looper I hear a clicking noise at the beginning of the loop. I thought it happened randomly but today I decided to make some tests with a synth block in front of the looper to investigate and it seems to be reproducible. Test is made of a synth block with default settings...
  3. HurdyGuigui

    Wish FC : Utility -> Send MIDI

    This wish was asked by @jordikt in the FM3 sub-forum, I have the same wish but for the III, I hope it is alright to make the same wish here. Here is the original : https://forum.fractalaudio.com/threads/utilities-send-midi.173536/ His idea is to have a function under the category "Utility"...
  4. HurdyGuigui

    Wish Ability to attach modifiers to any parameter

    I would like to be able to attach modifiers to any parameter. It happens quite a few time where I want to attach a modifier to a parameter, and see that it is actually not possible. Rather than asking for this or that parameter to be open, I thought it would be better to ask to have an option to...
  5. HurdyGuigui

    Implemented Step sequencer rate lower than 1Hz

    Right now, the rate parameter of the step sequencer has a minimum value of 1Hz, it means that the maximum time we can do between each step is 1 second. This is a bit confusing when using the tempo parameter : when using subdivisions that need the rate to be less than 1Hz, it stays locked to 1Hz...
  6. HurdyGuigui

    AFIII Pantera "Cowboys From Hell" hurdy gurdy cover

    Hello everyone, I am very happy to share with you a hurdy gurdy & drums cover I made of the song "Cowboys From Hell" from Pantera. While being confined I wanted a good challenge and this song was a perfect fit :). Hope you will enjoy it! One amp is for the melody, the other for the...
  7. HurdyGuigui

    Copy scene doesn't copy MIDI block scenes commands

    Hello, When using the copy scene function on the front panel, it seems that the commands per scene in the midi block are not copied accordingly, they stay the same. Same happening with the "swap scene function". Can someone confirm this? Is it an intended behavior or should it be corrected...
  8. HurdyGuigui

    Sequencer rate controled with tempo not following under 1 Hz

    Hello, I set up the tempo parameter in the sequencer to 2 so that the sequencer change step every 2 beats. It doesn't work, the issue is that the rate parameter doesn't go bellow 1 Hz. It seems that right now the behavior is that if the tempo induce a frequency rate bellow 1 Hz the rate stay...
  9. HurdyGuigui

    AFIII Axe-Fx III with a hurdy gurdy - Sunday live-streams

    Hello my friends ! I will be live-streaming some music with my hurdy gurdy and my axe fx III every Sunday at 5pm UTC, for the upcoming weeks of confinement. The next one is happening today here in a few hours : The first one from last sunday (March 22) can be replayed here : Hope to...
  10. HurdyGuigui

    Issue with layout link and external switches

    Hello, It seems that the layout link feature on external switches is not working : I want an external switch to increment preset and link to layout 2. I use standing switches and copy the switch 4 on my first layout. This switch is set up to increment preset and link to layout 2. -If I press...
  11. HurdyGuigui

    Issue with layout link on override switches with FW 6.04 / FC 1.09

    Hello, I have an issue with firmware 6.04 and/or FC firmware 1.09 : It happen on all my per-preset override switches that use a layout link. The layout link is not working anymore, it stays on the same layout. Can anyone try to setup a per-preset override switch with a layout link and check...
  12. HurdyGuigui

    CPU usage of shunts

    I am trying to save CPU usage on some big presets. I just realized that just the shunts between blocks without any effect cost me already around 9 % CPU (I have a lot of of routing happening, around 50 connections). Empty preset : 5,4% CPU Preset with just the routing shunts and without any...
  13. HurdyGuigui

    Wish Input mode option (stereo/left/right/sumL + R) in Input blocks

    Hello, In the MUX and VOL blocks, we have a parameter called "input mode" (for MUX block) or "input select" (for VOL block), with values : stereo/left/right/sum L+ R I would like to have the same option in Input blocks 2, 3 and 4. This to be able to use a mono channel only and use the gate on...
  14. HurdyGuigui

    Wish Route midi messages internally

    Hello, A while ago I made a wish to have the ability to route internally to the Axe itself the midi messages of the scene midi block. Now that we have the FC, I would like to reformulate this wish and extend it to the CS midi messages as this could allow a lot : -Control looper behavior on a...
  15. HurdyGuigui

    Implemented Sequencer : Manual Step

    Hello, I would like to be able to control manually (with a footswitch instead of frequency rate) the steps of the sequencer, like this : First press : Step 1 Second press : Step 2 Third press : Step 3 ....so on The idea would be to have a new parameter "step" that would manually go to the...
  16. HurdyGuigui

    FC : Send specific value of modifier in %

    Currently, control switches can only send 100% (ON) or 0% (OFF) values of modifier. I would like to be able to send a specific value of a modifier with switch presses, (IE : ON = 64%, OFF = 12%) This way we could have different switches controlling the same parameter with different values.
  17. HurdyGuigui

    Send specific value of modifier?

    Hello, In a few days I will be a happy owner of a FC12. I am going through the manual again to see how I am going to program the beast for my need. I have a question about Control Switches and modifiers. On my current midi controller setup (I use a FAMC LF+12+), I have a layout where the 12...
  18. HurdyGuigui

    AFIII Hurdy gurdy Axe-Fx III video

    Hello, Here is the first video I made since I have the Axe fx III. The song is called "Cicatrices" and is from my solo album "Visions". My hurdy gurdy has 6 outputs, going into 6 ins of the axe and I treat the signals separately (mostly gate/eq/comp/delays). I use a Deluxe Verb on the melody...
  19. HurdyGuigui

    Wish Global blocks for IN/OUT/IRP/MUX/LPR

    I would like the blocks IN/OUT/IRP/MUX/LPR to have the global block option. I use them in all my presets, and some time when I make a change I need to scroll to all of my presets to make the same change. That would be much easier with global blocks. Specially IN and OUT, great for having...
  20. HurdyGuigui

    Wish More Control Switches

    I wish we could have more than 6 switches to send external midi commands. Now we have only 6 Control Switches so we are limited to 6 different globally defined midi commands. I wish we would have up to 24 Control Switches, so that we could have up to 24 globally defined midi messages (24 is...
  21. HurdyGuigui

    Implemented Looper crossfade options or back like in 1.14

    Hello, I have been posting a few messages about the looper on a few last fw update threads and thought it would be best to make a proper thread about that. Here is the context : -Along with looper improvement, update 1.15 added fades at the beginning end end of the loop, which created a gap...
  22. HurdyGuigui

    Axe fx III with electric hurdy gurdy

    Hello, Now it has been almost two months I put my hands on this fabulous axe fx III, and I would like to share with you how this originally guitar processor works so well with my hurdy gurdy. My background with fractal audio : I have used the axe fx II for 5 years I beleive, and last year...
  23. HurdyGuigui

    High frequencies (above 11khz) in AMP block?

    Hello, I am working on some new sounds for my hurdy gurdy, and I am struggling with something in the Amp block. I have some beautiful frequencies above 11khz on my dry signal, but somehow whenever I put an Amp block, they got cut off, just as if a high cut filter was set up (which is not the...
  24. HurdyGuigui

    Wish Global block for MBC

    Hello, I like to put a MBC at the end of my effect chain on every preset so that I can control the low end of my tone and be sure that the bass level is consistant throught all my live set. This worked well on axe II with a global MBC that I could adjust depending on the venue. Is it possible...
  25. HurdyGuigui

    Implemented Use Scene Midi block to transmit internal messages

    It would be awesome to be able to send internal midi messages per scene to the Axe itself with the midi block : We would have an new entry for each midi messages : a "routing" column in the midi block : -If set to "midi out" (default), the message would be sent to the midi output (as it is...
  26. HurdyGuigui

    Wish More instances of Looper block

    I would like to be able to have several instances of the looper block, just like any other effect :). At least 2 instances, but 4 if possible. Each looper would have his own assignable midi/FC controls Use cases : 1 - Differents parts of a song : You can record a verse in Looper 1 You can...
  27. HurdyGuigui

    Implemented Add the option "All inputs" to the input tuner parameter

    It would be great if we had an option to have all inputs going into the tuner It would be even better if we had all the possible combinaison of inputs available, here is the list : Input options for tuner : 1 2 3 4 1 + 2 1 + 3 1 + 4 2 + 3 2 + 4 3 + 4 1 + 2 + 3 1 + 3 + 4 2 + 3 + 4 ALL INPUTS...
  28. HurdyGuigui

    Tuner for all inputs?

    I am wondering if the tuner of the axe III will be available on all the differents inputs? This would be great for using the axe with multiple instruments. I can't wait to put my hand on this beast :)
  29. HurdyGuigui

    Axe fx II with a hurdy gurdy, two years after

    Hello, Two years ago I posted a thread when I received my axe fx II and started using it with my hurdy gurdy. Here I am after tweaking the beast for two years, I could try a lot of amps/cab/effects, and find some that really work perfectly with the gurdy. So that's it, I just wanted to say...
  30. HurdyGuigui

    Liquid Foot +, Looper with 2 buttons (JamMan style)

    Hello, I finnaly managed to program my liquid foot (12+), to control the axe fx looper with 2 buttons, just like my old digitech JamMan looper behave. How it work : Button 1 : -first press : RECORD -second press : PLAY -next presses : OVERDUB ON/OFF Button 2 : -first press : ONCE...
  31. HurdyGuigui

    Ignore redundant PC and PC changing scene to scene 1

    Hello, I noticed that if you send a redundant PC to the Axe , and Ignore redundant PC is ON, the scene 1 will be loaded, whatever the scene you were before sending the PC (I don't use any custom mapping). Example : You are on preset 01 scene 3 You send PC 001 to the Axe It will switch to...
  32. HurdyGuigui

    Axe fx 2 with a Hurdy Gurdy !

    Hello ! I read this forum for a while but finaly here is my first post! please forgive me if I make some mistakes on writting because I am French (from Toulouse). I just received my Axe fx 2 from g66 this monday (I was saving my money for 2 years to buy it). I dont play guitar but hurdy gurdy...
Back
Top Bottom