Search results for query: *

  1. HurdyGuigui

    Wish Minimum time between two triggers of the same external switch (Debounce)

    I tried with an other brand (Ampero dual switch) and it works great. There is a mechanical debounce in the switch though. So this remain a wish for switches that doesn't have either electronic or mechanical debounce integrated.
  2. HurdyGuigui

    Wish Minimum time between two triggers of the same external switch (Debounce)

    Thanks for naming the right word for what happens. Can someone from Fractal tell us if there is some debouncing happening into the FC input? I might try to do it electronically if there are no other solution.
  3. HurdyGuigui

    Wish More scenes

    +1 I often use scenes in a way that one scene = one part of the song and just have an increment scene button to go from one scene to the next. On some songs I would need more scenes to be able to do that.
  4. HurdyGuigui

    Looper Quantize

    I think this picture illustrate the problem very well. If I try to sum up what we need : -If looper PLAY is pressed early, don't change anything it is working -If looper PLAY is pressed late by X ms : start the loop not from the beginning but from time X.
  5. HurdyGuigui

    Wish Minimum time between two triggers of the same external switch (Debounce)

    Hello, I have an issue with my external switches, it works well but sometimes (about once every 20 times) it trigger the action twice, just like if I pressed my switch two times in a few milliseconds. It is problematic when I map my external switch to the looper controls or to scene increment...
  6. HurdyGuigui

    Wish Tuner: All Inputs: detector

    +1
  7. HurdyGuigui

    Implemented Step sequencer rate lower than 1Hz

    Up, I definitively need this :)
  8. HurdyGuigui

    Wish Looper block : Max loop time in ms

    Currently the max loop time in the looper block is only programmable in 0.1s steps . I would like to be able to set in in ms, or in 0.001s steps so that we can match it to the tempos we are using. Example : I am playing a 1 bar loop at 106 BPM, I want to set the max loop time so that when I...
  9. HurdyGuigui

    AFIII Hurdy gurdy Axe-Fx III video

    Haaa I think I finnaly got what you are asking :). So what happen at 2'59 is that I am pushing two notes at the same time and slowly switching the pressure from the lower note to the higher note so that it makes a bend. But because I have two melodic strings (one is one octave higher than the...
  10. HurdyGuigui

    Axe-Fx III Firmware 24.05 Release

    Thanks for your insight, I understand a bit more what is happening now. So if I understand correctly the Air parameter is mixing some of the dry signal with the cab signal. I tried to add some Smoothing but it doesn't work. Moving the time-alignment of the cab changes how the air react but it...
  11. HurdyGuigui

    Axe-Fx III Firmware 24.05 Release

    Hello, I updated very recently from firmware 20. I started playing with dynacab today and I have an issue. Is it normal that the AIR parameter react very differently when using DynaCab? I feel it is doing a very strange behaviour, cutting some frequencies instead of just adding air as it did...
  12. HurdyGuigui

    Axe-Fx III Firmware 24.05 Release

    @FractalAudio would it be possible to correct this bug for next firmware? I tested it again on 24.04 and it was still there. It is currently not possible to order songs from setlists 2 3 and 4 on the unit : https://forum.fractalaudio.com/threads/unable-to-reorder-songs.195244/ Thank you
  13. HurdyGuigui

    How many are using external loopers w/ Fractal?

    I use the fractal looper because I like to be able to route it differently depending of songs. I really wish it was better though, with multiple layers, ability to attach modifiers to looper control, better crossfading and better quantize options.
  14. HurdyGuigui

    Bug? Unable to reorder songs

    Issue still there on firmware 24.04. Only possible to order songs in the first setlist on the unit.
  15. HurdyGuigui

    Wish Delay repeat clearing

    Ohh, it sounds interesting ! I didn't update for a while because I have lot of shows those days so I think I am still around firmware 20 or 21... My use case is to use the delay as a looper with a specified number of bars, this way I can have multiple loopers with different lenght of loops. It...
  16. HurdyGuigui

    Wish Delay repeat clearing

    Up, Still no workaround to clear this buffer?
  17. HurdyGuigui

    Implemented Step sequencer rate lower than 1Hz

    Up. The sticker says implemented but it is not. Behavior is still strange, we can choose tempo synchronization but the rate doesn't follow because it is locked to 1Hz min. Please allow us to go down to 0.01Hz so that the tempo parameter will work for all values. Thank you.
  18. HurdyGuigui

    Bug? Unable to reorder songs

    Hello, same issue here.
  19. HurdyGuigui

    Wish Dynamic EQ

    +1
  20. HurdyGuigui

    Wish Delay repeat clearing

    Hello, Same issue here. Tried a lot of different ways with time and feedback modifiers as well as channel switching but nothing work. +1 for a way to clear the buffer.
  21. HurdyGuigui

    Get rid of switching Audio GAPs p1/6 - Technical measurements and info

    I find those measurements very interesting. I am waiting to see the full results but I think this might help me manage my channels switching. Keep up with the good work.
  22. HurdyGuigui

    Bug? Looper clicking noise

    Problem appears no matter the number of blocks or CPU usage. Here is a preset showing the issue with only a SYNTH, a LOOPER and an OUT block. WARNING : Don't put the volume too loud, the synth will play only when you start using the looper. STEP 1 You just have to open the looper, press REC...
  23. HurdyGuigui

    Bug? Looper clicking noise

    I was too curious, I installed 22.00 😅. The problem is still there unfortunately.
  24. HurdyGuigui

    Bug? Looper clicking noise

    I have gigs coming up so I prefer not to uodate right now. I checked release notes and didnt see any work on the looper since 20.04 but maybe this would go into the category of "various fixes and improvements"? I will update at some point but if someone on 22.00 wants to give it a try, it is...
  25. HurdyGuigui

    Bug? Looper clicking noise

    Sometime when using the looper I hear a clicking noise at the beginning of the loop. I thought it happened randomly but today I decided to make some tests with a synth block in front of the looper to investigate and it seems to be reproducible. Test is made of a synth block with default settings...
  26. HurdyGuigui

    Wish More Control Switches and exclusive groups?

    +1
  27. HurdyGuigui

    Axe-Edit Linux version

    I use Axe Edit with Wine too but I would love to have a native linux version.
  28. HurdyGuigui

    Wish - sequencer play direction

    +1
  29. HurdyGuigui

    Implemented Step sequencer rate lower than 1Hz

    Up. I see that the sticker says implemented but it doesnt seems to be, at least on firmware 20. Did I miss something? Thanks.
  30. HurdyGuigui

    Wish Can we PLEASE get back the old Looper control behavior?

    Exactly ! :)
  31. HurdyGuigui

    Wish Utilities>Send MIDI

    +1
  32. HurdyGuigui

    Wish Open Looper Functions to Modifier Attachment

    Up :)
  33. HurdyGuigui

    Wish Can we PLEASE get back the old Looper control behavior?

    +1 The looper is very difficult to control via midi in this state
  34. HurdyGuigui

    Bank Up/Down Songs Within a Set

    Here is a way to achieve browsing 120 songs (stored in the 4 set lists from 1 to 30) on a FC12, using only 3 layouts : Just tap the upper right switch to go up next 10 songs Just tap the lower right switch to go down previous 10 songs Hope this help ! :) Layout 1 Song 6 Song 7 Song...
  35. HurdyGuigui

    Wish Add modifier capability to Metronome volume(s)

    Well then, this wish implies a change to the metronome architecture... I don't know how it is implemented, but the tempo is stored per preset, I guess the volume could also be stored per preset and open to modifiers. The metronome could be maybe included in the controller block?
  36. HurdyGuigui

    Wish Add modifier capability to Metronome volume(s)

    +1111 This would save me to adding a synth block and a tremolo block for all my presets. I use a click live and it would be much easier to just have a control on the metronome level.
  37. HurdyGuigui

    Wish Input select on more/all blocks

    +1, this would help me a lot with routing as well. I would love to have this on all the Input blocks and all the EQs.
  38. HurdyGuigui

    Face plate Logo wearing off Axe FX lll

    My logo on my first axe fx Axe III did the same. This is rhe reason why I bought the Turbo version 😅 I did carry my first III a lot of time in a suitcase filled with foam around the Axe. My guess is that the foam rubbed the logo...
  39. HurdyGuigui

    Wish Tuner - enable Input Source to be used with modifier

    Up I would like to be able to select wich input is active in the tuner from the FC12.
  40. HurdyGuigui

    Wish FC : Utility -> Send MIDI

    This wish was asked by @jordikt in the FM3 sub-forum, I have the same wish but for the III, I hope it is alright to make the same wish here. Here is the original : https://forum.fractalaudio.com/threads/utilities-send-midi.173536/ His idea is to have a function under the category "Utility"...
  41. HurdyGuigui

    Wish Utilities>Send MIDI

    This makes so much sense and would solve many wishes for more cs. +1000
  42. HurdyGuigui

    Wish Allow 6 instances of Vol/Pan, Drive, IR Player, Synth, Pitch and other blocks, for Hex-processing

    I was thinking today that maybe it is an option that would be doable on the mk2 with the extra memory? I would love more instances of Vol/peq/fil/comp/
  43. HurdyGuigui

    Wish Digital I/O on the grid

    Is it? From which firmware number?
  44. HurdyGuigui

    Wish Adjust/Set the Metronome Output via the Foot Controller Switches

    +1 One way would just to open metronum volume to modifier : you could then attach it to a CS for on/off control, or an expression pedal for volume, or a scene controller to change metronum volum across scenes. Would be simple and awesome. I use the synth method at the moment, works good but uses...
  45. HurdyGuigui

    Wish Open Looper Functions to Modifier Attachment

    +1
  46. HurdyGuigui

    Wish Metronome on/off switch

    +1 I also wish this switch will be open to controllers so that we can turn on/off the metronome with a CS or when changing scenes
  47. HurdyGuigui

    "Internal" MIDI control?

    I do it without any problem for a few years. You just have to be careful not creating any midi loops, check in the parameters to desactivate sending midi on scene change / preset change (although it may work without checking that off). I am mainly sending messages with the midi block to...
  48. HurdyGuigui

    Wish Utilities>Send MIDI

    +1!
  49. HurdyGuigui

    Wish Digital I/O on the grid

    Up :)
  50. HurdyGuigui

    Who else is upgrading to Axe-FX III TURBO? :-)

    Turbo coming in from G66 next week :)
  51. HurdyGuigui

    Wish 16 scenes

    +1
  52. HurdyGuigui

    Wish Can we have a couple more VolPan instances per preset?

    +1 for more vol blocks
  53. HurdyGuigui

    Announcing Axe-Fx III Mark II TURBO

    Yesssss !!!! More POWER !!! I am upgrading from my mark I for sure! :)
  54. HurdyGuigui

    Wish Lock preset from overwrite feature

    +1
  55. HurdyGuigui

    Wish Echo the Pedal1/Pedal2 MIDI CC position to the MIDI USB and to the MIDI Output

    +1
  56. HurdyGuigui

    Wish Global Blocks for Inputs 2-4

    +1
  57. HurdyGuigui

    Wish Latency / Time Alignment block

    +1 for a micro-delay type
  58. HurdyGuigui

    Implemented Step sequencer rate lower than 1Hz

    I have to say first that I love the new Pause/Step feature and I am so thankful it got implemented 🙏. This beeing said and with all respect I still wish the rate of the sequencer could go under 1Hz, I also need sequences with steps changing with more than 1 sec interval. I agree 0.1 Hz would be...
  59. HurdyGuigui

    How do you retain custom in/out preset settings after updates?

    I think a routing matrix would be a possible solution to your problem, check this wish : https://forum.fractalaudio.com/threads/i-o-routing-matrix.162651/
  60. HurdyGuigui

    Axe-Fx III Firmware Release Version 16.04

    AMAZING !!! Thank you so much for this one, I will use that a lot !
  61. HurdyGuigui

    Wish Ability to attach modifiers to any parameter

    Look how people went creative and had fun :D
  62. HurdyGuigui

    Wish Ability to attach modifiers to any parameter

    Looper is available via CC, but it is not working properly as the controls don't respond to toggle state ( see this link : https://forum.fractalaudio.com/threads/can-we-please-get-back-the-old-looper-control-behavior.147297/ ). Plus when using a FC12 or FC6, it means you have to do a midi loop...
  63. HurdyGuigui

    Wish Ability to attach modifiers to any parameter

    Thank you everyone for your thoughts. The artifacts/unpleasant noises point makes sense, I didn't think about that, although I think I still would prefer to have the freedom to attach the modifier and hear myself if the noises are too much in each particular use case. But I understand the...
  64. HurdyGuigui

    Wish Ability to attach modifiers to any parameter

    You can always see the list of modifiers attached in a preset in the "Modifier" tab of the Controllers menu, so this shouldn't be an issue. But somehow I understand your point and this is why I am suggesting to make this an option somewhere in the setup, so that the average user will have by...
  65. HurdyGuigui

    Wish Ability to attach modifiers to any parameter

    I would like to be able to attach modifiers to any parameter. It happens quite a few time where I want to attach a modifier to a parameter, and see that it is actually not possible. Rather than asking for this or that parameter to be open, I thought it would be better to ask to have an option to...
  66. HurdyGuigui

    Wish More instances of Looper block

    I am able to get a long fade out with the Step sequencer and those settings : Number of steps : 32 Rate : 1Hz Damping time 1sec Set the steps as follow : step 1 = 100%, step 2 = 95%, step 3 = 90% ... step 19 = 5% step 20 = 0 % step 21 = 0% step 22 = 0% ... step 32 = 0% This makes a smooth...
  67. HurdyGuigui

    Stereo Mode for Input 1 Front + Rear Inputs Combined.

    I never thought about that, great idea ! +1 if that allow us to get one more input I am in :)
  68. HurdyGuigui

    Implemented Step sequencer rate lower than 1Hz

    I am controlling a pitch block with the step sequencer. I am running a drone (a low C) into the pitch block so that the step sequencer give me a sequence of bass notes : for exemple : step 1 = C, step 2 = E, step 3 = C, step 4 = A.... I play with the click to be in sync with the bass line. This...
  69. HurdyGuigui

    Implemented Step sequencer rate lower than 1Hz

    Right now, the rate parameter of the step sequencer has a minimum value of 1Hz, it means that the maximum time we can do between each step is 1 second. This is a bit confusing when using the tempo parameter : when using subdivisions that need the rate to be less than 1Hz, it stays locked to 1Hz...
  70. HurdyGuigui

    Axe-Fx III Firmware Release Version 16.01 Beta 1 Public Beta

    Yesss, me too ! Amazing :)
  71. HurdyGuigui

    Wish Digital I/O on the grid

    +1 for a IN digital block. I would like to be able to use all 4 inputs analog + AES/spdif all at once. It is currently not possible since right now we have to assign the AES/Spdif in to replace one of the analog IN.
  72. HurdyGuigui

    Wish Add modifier capability to Metronome volume(s)

    +1000 I need this so much, I need to be able to attach a scene controller to the bpm volume so that I can send it to my drummer on certain parts of songs.
  73. HurdyGuigui

    Wish Allow 6 instances of Vol/Pan, Drive, IR Player, Synth, Pitch and other blocks, for Hex-processing

    +1 for more drives, also 6 vol, 6 peq, 6 gates. And added separated mono input blocs.
  74. HurdyGuigui

    Wish I/O Routing Matrix

    +1
  75. HurdyGuigui

    Wish CPU usage meter in Block Pages

    +1
  76. HurdyGuigui

    Axe-Fx III Firmware Release Version 12.09

    So fast!!! o_O
  77. HurdyGuigui

    Axe-Fx III Firmware Release Version 12.09

    Hello, I just had an issue (I don't want to call it a bug but...). I was tweaking the reverb, precisely playing with High Freq Time and Low Freq Time parameters, suddently the output of the reverb went full red and my output 1 went full red. I restarted the axe but whenever I go to this preset...
  78. HurdyGuigui

    AFIII Pantera "Cowboys From Hell" hurdy gurdy cover

    Hello everyone, I am very happy to share with you a hurdy gurdy & drums cover I made of the song "Cowboys From Hell" from Pantera. While being confined I wanted a good challenge and this song was a perfect fit :). Hope you will enjoy it! One amp is for the melody, the other for the...
  79. HurdyGuigui

    Please allow naming of global blocks. Pretty please.

    + 1 and one more for that !
  80. HurdyGuigui

    Wish Metronome Block

    Hello, +1 for those 3 original wishes : -metronome assignable to ANY output -persistent metronome volume (instead of defaulting to OFF after power down) -ability to turn metronome on/off per preset/scene For the per-scene requests, I think among all the proposals the best is to give channels...
  81. HurdyGuigui

    Implemented step Sequencer or "resume" option in Sequencer

    +1 for that, I would use it a lot. I also wish we could have the rate of the sequencer go under 1 HZ so that we can have it run slower.
  82. HurdyGuigui

    Copy scene doesn't copy MIDI block scenes commands

    Hello, When using the copy scene function on the front panel, it seems that the commands per scene in the midi block are not copied accordingly, they stay the same. Same happening with the "swap scene function". Can someone confirm this? Is it an intended behavior or should it be corrected...
  83. HurdyGuigui

    MIDI Block - Request to add Channels

    I agree with that. The way you implemented CS is just perfect because they can combine internal action + midi command AND we can store their state on a scene basis. I have to say you did it beautifully ! But... we have only 6 of them, and if we want to use CS to do some stuff in the Axe...
  84. HurdyGuigui

    AFIII Axe-Fx III with a hurdy gurdy - Sunday live-streams

    Thank you so much for all your comments ! Here is the live-stream link for tomorrow :)
  85. HurdyGuigui

    Sequencer rate controled with tempo not following under 1 Hz

    Hello, I set up the tempo parameter in the sequencer to 2 so that the sequencer change step every 2 beats. It doesn't work, the issue is that the rate parameter doesn't go bellow 1 Hz. It seems that right now the behavior is that if the tempo induce a frequency rate bellow 1 Hz the rate stay...
  86. HurdyGuigui

    AFIII Hurdy gurdy Axe-Fx III video

    I don't see what you mean by double stop? Can you point me a timing on the video? I will tell you what is happening :)
  87. HurdyGuigui

    AFIII Axe-Fx III with a hurdy gurdy - Sunday live-streams

    Hello my friends ! I will be live-streaming some music with my hurdy gurdy and my axe fx III every Sunday at 5pm UTC, for the upcoming weeks of confinement. The next one is happening today here in a few hours : The first one from last sunday (March 22) can be replayed here : Hope to...
  88. HurdyGuigui

    Wish Ability to route MIDI to/from USB

    + 1 for this
  89. HurdyGuigui

    AFIII Hurdy gurdy Axe-Fx III video

    Thanks guys for resurrecting this thread and for all the compliments :blush: I am going to post more videos like this in the next few months ;) Meanwhile here is a short video preview of my duo concert (the video was shot last summer during my US tour) : @Rex , I got the harmonics by lifting...
  90. HurdyGuigui

    WISH: "Send MIDI function"

    Bump on on my biggest Fractal wish as well ! This or more CS : https://forum.fractalaudio.com/threads/increase-number-of-control-switches.150824/ https://forum.fractalaudio.com/threads/wish-more-control-switches.147507/ https://forum.fractalaudio.com/threads/more-cs.148169/
  91. HurdyGuigui

    Looper Problems

    I personally put it near the end but before any time based effect (delay/reverb), so that when you stop the loop, the loop still resonate in the delay/reverb. Makes the loops stops more natural.
  92. HurdyGuigui

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Hello, I have started using Fracpad on my laptop. I have to say that it is really amazing, it works much more fluid than AxeEdit for me, specially since most of my presets are above 80% cpu. It makes me even consider getting a tablet to try it with a touch screen. @AlGrenadine thank you so much...
  93. HurdyGuigui

    FM3 as FC-3 foot controller

    + 1 for this, I would do exactly the same as a flying rig. FM3 + FM6 = 9 buttons to control the Axe III, + the FM3 would be the included backup rig. Would be amazing !
  94. HurdyGuigui

    Assignable USB Computer Input sources

    Can we have this implemented even without changing the USB firmware? This would really be so helpfull for routing stuff around in the studio, reamping multiple tracks at the same time, having multiple rows of effect for different tracks, sending multiple synths to the axe, etc. I don't think the...
  95. HurdyGuigui

    Implemented Add Input 2-4 Source with SPDIF/AES option

    +1
  96. HurdyGuigui

    Wish Add Global option to Mixer block

    +1
  97. HurdyGuigui

    Issue with layout link and external switches

    Thank you very much for looking this up and answering so fast. I will wait patiently for the fix ;)
  98. HurdyGuigui

    Issue with layout link and external switches

    Hello, It seems that the layout link feature on external switches is not working : I want an external switch to increment preset and link to layout 2. I use standing switches and copy the switch 4 on my first layout. This switch is set up to increment preset and link to layout 2. -If I press...
  99. HurdyGuigui

    Increase number of Control Switches

    Hello, +1 again on this one. I love the FC, it is amazing just as the Axe is, and I am so thankfull that Fractal exists and provide me with such amazing pieces of gear to play around and express my creativity. This beeing said and with all respect, it is (some days) very frustrating for me to...
  100. HurdyGuigui

    Wish "Copy Output 1 to Output 3" in the I/O Menu

    I use out 2 already somewhere in the chain to be able to record pre-delay/reverb signal. I cannot switch with out3 or out4 as out3 and out4 are not available as inputs in the audio interface settings
Back
Top Bottom