Search results for query: *

  • Users: qjawz
  • Content: Threads
  • Order by date
  1. qjawz

    SPDIF Lockup.

    Hi all I'm trying to figure out what has happened to my FM9. I had everything plugged up like normal and my SPDIF's were connected as usual in my studio. I powered up and I got this loud but dark sounding distortion. I tried changing presets and nothing it had completely locked up and I got a...
  2. qjawz

    Separating Out/In 3 L/R

    I currently use my out 3 knob at unity for an external looper that controls all my external drives. So that entire signal is mono. I was wondering if it might be possible to separate the left and right side of both the out/in 3 in order to place let’s say out 3 R further down the signal path...
  3. qjawz

    Halcyon overdrive adaptive circuitry

    Hi all, anyone have any suggestions on how something like the adaptive circuitry in the halcyon might be imitated in the axe fx? Here is the description in its position 2 mode. “Full adaptive behaviour. The pedal’s treble and bass roll-off will be reduced significantly as it cleans up, for a...
  4. qjawz

    Unity gain possibility for out 2

    Hello, this is a question for @m_brown and or @Admin M@ is it possible to get out 2 to operate as out 3 on the FM9? I run my pedals through the morning star ML5 so that eats up I/O 3. I can run I/O 2 to the front of my physical amp but getting unity is always such a pain. Could this be possible...
  5. qjawz

    Need advice

    Edit: pictures Hi everyone, I have been loving the fm9. Currently, I’ve been using out/in 3 with a few overdrives using a Morningstar ML5 for switching based on scenes and then either out to FOH or into the front end of my mark 5:35 (fat channel edge of breakup is divine). Both sound routes...
  6. qjawz

    Possible bug

    I transferred my kitchen sink preset from my Axe Fx III to my FM9. I know things won’t be perfect but I was in the Cpu limit between the two units. What I noticed is that levels on let’s say for example a 1k boost with a gain level of 1dB will be a .06 in a parametric eq. Same thing in the delay...
  7. qjawz

    Global blocks

    Is there a possibility of adding global blocks in the future? @FractalAudio @Admin M@
  8. qjawz

    Wish Triaxis LD1 green and yellow

    Any chance the mark 1 feel can be added :) Or even like FAS amp version Would be amazing!
  9. qjawz

    Implemented Controller channels

    Is it possible to add channel switching to the FA for the controller switch?
  10. qjawz

    13.01 possible bug

    I just updated..as you can see in the preset I have an AC20 in channel B all I did was change my gain enhancer to 1.00 and save...then I heard a pop and now drive 2 in the chain won't doesn't have any output when I switch scenes (scenes 3 and 4)..please note I forgot to add some other cab so a...
  11. qjawz

    Can someone check this for me?

    Hey all, can anyone tell me if my main full axe3 preset can transfer to the fm3 with no hiccups?
  12. qjawz

    Jumping amp

    Hey folks, how would I theoretically jump the dc30 in the axe fx? The two amp blocks 1 channel each in parallel? Or 1 amp block into the other? thanks in advance.
  13. qjawz

    FX on III to FX8?

    Hey all, So would anyone with an FX8 be able to tell me if you can run the FX blocks settings in my Axe Fx III patch on a FX8 I'm thinking about picking one up. It would be blocks: Comp Flang Drive 1 Volume Delay 1 Multidelay 1 Pitch 1 Reverb 2 on high Without hitting the limit or having...
  14. qjawz

    44.1 to 48

    Hey guys, So I've been looking to buy some orchestral samples for myself. I'm finishing up my composition degree and some of my music production classes went over nyquist but to be honest I still have a hard time understanding it. From what I do understand is there are bad frequencies that tend...
  15. qjawz

    Axe 8 Tuner - 8 ball

    Not sure if this has been discussed before...but is it possible to get the same "magic 8 ball" in the tuner of the axe fx on axe 8 as well? Cheers
  16. qjawz

    Fx loop 4CM

    Hey community, I've had my Axe fx for quite a number of years and I'm pretty stump to know if I'm running the proper levels. Recently I acquired a new mesa head and I have been trying really hard to get fx loop to work properly with axe. I have done the necessary things (put FX block where I...
  17. qjawz

    Polyphia

    Hey guys I'm a big polyphia fan and love there tone. I was searching the interwebs and found this guys patch and it sounds phenominal!!! Give this guy some credit and check it out! http://axechange.fractalaudio.com/detail.php?preset=4168 Cheers!! BTW if anyone has a matching rhythm patch for...
  18. qjawz

    Axe Fx for my mac

    So there is another thread that got locked for some reason..I don't mean to cause any strife while bringing it up but is there going to be a Axe Fx like Bias? That is for our computer etc. With all the effects and everything??? I'd seriously like to know.
  19. qjawz

    Bug? Triaxis LD1 Red

    If I recall this amp and save...I'll get a set of values in the axe edit menu. then change to a different preset and come back and it changes the lot of values preamp bias 0, preamp hardness 8.2, and triode freq 1 2000, tone location Post. Upon recall....also if you choose this amp the "Mark EQ"...
  20. qjawz

    Ringing/hum...?

    I dont want to put this into the bug section because I dont think it is one as it doesn't do it if I move the amp block to another patch but can anyone help me locate the issue of this? User cab is used just use a ML Trad factory cab to reproduce. I'm on Q3b and its on scene 1 and the problem...
  21. qjawz

    Triaxis LD2's

    So I've been using these models primarily for a couple weeks and I have two questions... Based on the release notes back in 17.00 "A “Presence Shift” switch has been added to certain “USA” amp models (those based on amps with a “Pull Shift” on the Presence knob). This switch is found under the...
  22. qjawz

    MFC DISPLAY

    Hey guys so I made the mistake of asking a buddy of mine to carry my MFC for me he of course held it against his belt and sure enough the display glass got a nice big ol' scratch from it....I can still see when I'm using it and I turn the brightness up, but it annoys the crap out of me when I...
  23. qjawz

    Setting IA switch to change preset

    Hey guys, I'm trying to figure out how exactly I can make my IA switch into a preset switch. I'm using 5 scenes with one main patch on IA switch 1-5. What I'd like to do is use IA 6-8 to change to a different patch..I followed the Wiki instructions on this as best as I could but I'm not sure...
  24. qjawz

    super dumb question........

    Hey guys I just got protools 11. I've never recorded by myself, and I'm getting ready to start experimenting with it. I know I can set up the axe to be the audio interface but can I make the audio come out of my studio monitors? Thank you in advance :) Maybe someones got a video?
  25. qjawz

    Power Cord question

    Hey guys, so I got a question about compatible power cords. I recently got a new soft rack case, but when I close the back I'm not able to keep the power cord plugged into the back of the axe and into my power conditioner. So in order to solve this I ordered a AC cord that was left angled and...
  26. qjawz

    check this out for me

    so im not sure if its because of my settings or if a bug. click on scene 4 then scene 3 then back to scene 4. i get a continous note repeating. Please check this out for me. :):):):):)
  27. qjawz

    FW 18Beta

    Hey guys, So I play every weekend at church and I've got a couple days off from work in which I can do some tweaking if need be and then it'll be done for when the official FW18 release comes out. I did some reading from other threads and people have noticed a difference in amp quality which...
  28. qjawz

    Mfc paint

    Hey guys anyone know of a spray paint or something that will match the color of the mfc? I want to cover some paint that has chipped off?
  29. qjawz

    How to set up 2 recording mics on the axe?

    Any advice on the matter and how to set up the axe to record the piano?
  30. qjawz

    looper possible bug

    I was messing around with the looper today and maxed out the playback simple 8 bar 4 chord progression...anyways went and started playing a lead over and noticed i was out of tune turned the tuner on, tuned up, hit recall, hit layout...and nothing was showing on layout. hit recall again and the...
  31. qjawz

    Lace Alumitones vs EMG

    Just wondering if anyone has tried the alumitones and if so how do they compare to a set of EMG's?
  32. qjawz

    Hello friends

    Volume swell not working like I want it to. So I'm looking to get the same effect as the volume swell on Ganymede in the factory presets. I actually copied the exact volume block from there to my patch but I'm not receiving the effect from it only a mild version...can anyone tell me what I'm...
  33. qjawz

    Just updated

    Just updated from 14.3 to 15.2 I used the update all amps in presets and I also re-selected and put my previous values into the amp block...is there anything else i need to re-select? (i.e effect blocks) Forgive me if this has been covered I don't have much time to check the forum anymore.
  34. qjawz

    Rack Drawer and MFC 101 Dimensions.

    Ok so I've found on some threads that the MFC is Dimensions: 15.75” x 3” x 10” (400 x 76 x 254 mm)....that being said I've also read that it won't fit into a rack drawer without taking the MFC feet off. Can anyone verify the height from MFC feet to top? I'm looking at this Gator Rack Drawer |...
  35. qjawz

    Poltergeist Pig Factory patch

    Anyone notice it in the new AAL track ;)
  36. qjawz

    Scene attempt 2

    ....So I've tried this before and I gave up, but I figured one more crack wouldn't hurt. I've been using my main patches with no problems and I have no issue when applying any effects on those. I am just trying to utilize the Scene function so I have gap-less switching and everything is in one...
  37. qjawz

    Fanned frets

    Hey so other than scale lengths and creating a good over all tensions. Do fanned frets help with a more consistent intonation across the fret board?
  38. qjawz

    out clipping when going from clean to dirth using scenes

    Ok....I wanted to create gap less switching! So setting up scenes sounded ideal. I have consolidated my 4 patches into one patch using scenes..I have dirty scene, a lead scene, clean scene, and clean lead scene. I am using 2 amps both have an X and Y state for different Eq between Rhythm and...
  39. qjawz

    Scale the summit patchs

    Just wondering if anyone has successfully created any scale the summit type patches? cleans, lead, rhythm? I've checked the axexchange but no luck..I know based on the fractal profile Chris Letchford uses: "What are your favorite amp models in the Axe-Fx II at the moment? For cleans, I...
  40. qjawz

    DigiTech Control2 Foot Controller

    Hey is this compatible with the axe fx 2? DigiTech Control2 Foot Controller DigiTech Control2 Foot Controller | Musician's Friend It's connected with a Cat 5 but in regards to it recognizing?
  41. qjawz

    TAP TEMPO ISSUE

    Hey guys, So I have been having an issue with tap tempo...I use a HD500 as my midi controller and tap in they communicate fine everything sounds great, as soon as I change my preset the tempo on the axe fx completely changes while the tempo light on HD500 is exactly the same. A little...
  42. qjawz

    Axe Fx tuner vs Peterson

    I know the axe tuner is super accurate I use it for live venues all the time...but for setups I've been using a boss TU-2 and until recently I had some problems with my intonation (TU-2 said everything was in but it just didn't sound close enough). So I went to a local guitar tech was and he was...
  43. qjawz

    MFC + another MIDI at the same time?

    Is it possible to run two for two separate guitars....e.g my electric and acoustic same patch and acoustic has effects on it as well?
  44. qjawz

    Hello Forum!!!

    Carvin V3...good bye Pod Hd500...peace Eleven Rack...later HELLLLLLLLO AXE FX II...coming sometime this weeeeeek :D:-P:D:-P:D:razz:razz:D:razz:lol
Back
Top Bottom