We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results for query: *

Users: qjawz
Order by date

Axe-Fx III Firmware 24.00 Public Beta #1

Is this global master similar to the output knob when the loop on the amp is engaged?
- qjawz
- Post #79
- Dec 16, 2023
- Forum: Axe-Fx III Discussion
SPDIF Lockup.

Thanks Glen my clock source at home is always set to spdif after testing it on my axe fx 3 somehow my Focusrite defaulted back to 96k so that was the problem thanks all is right in the world again.
- qjawz
- Post #3
- Sep 9, 2023
- Forum: FM9 Discussion
SPDIF Lockup.

Hi all I'm trying to figure out what has happened to my FM9. I had everything plugged up like normal and my SPDIF's were connected as usual in my studio. I powered up and I got this loud but dark sounding distortion. I tried changing presets and nothing it had completely locked up and I got a...
- qjawz
- Thread
- Sep 9, 2023
- Replies: 2
- Forum: FM9 Discussion
Who's gone from the III to the FM9?

Here is a screenshot of my worship kitchen sink patch in the Axe Fx Mark I 86% and FM9 76% (non Turbo) and a bonus one of my patch plus a plex reverse delay block as a bonus which is only active on my ambient scene 83%. My top 3 buttons are layout switches which got to quick mod, time, or...
- qjawz
- Post #24
- Aug 26, 2023
- Forum: FM9 Discussion
Looking for Guitar Pick Suggestions

This my first suggestion doesn’t solve the issue of losing it if it falls but if you can keep an eye on it all the time bluechip is the way to go. They stay put in your hand and don't go anywhere I have been using the same bluechip for a year and a half and I’ve had to re-bevel it 3 times so far...
- qjawz
- Post #46
- Aug 1, 2023
- Forum: Guitars
Separating Out/In 3 L/R

I currently use my out 3 knob at unity for an external looper that controls all my external drives. So that entire signal is mono. I was wondering if it might be possible to separate the left and right side of both the out/in 3 in order to place let’s say out 3 R further down the signal path...
- qjawz
- Thread
- Jun 17, 2023
- Replies: 1
- Forum: FM9 Discussion
Advice for a cruise ship musician using FX III?

The Furman AC-215A is what you need for FM9 super portable and easy to set up.
- qjawz
- Post #5
- Mar 25, 2023
- Forum: Axe-Fx III Discussion
Are new amps really needed?

Instead of more amp models being added I would rather have existing models and their separate push pulls/switches be consolidated into one amp model. Also any that are missing also be added.
- qjawz
- Post #95
- Feb 4, 2023
- Forum: Axe-Fx III Discussion
Axe FX III 4cm Mark V 35 Opinions?

My mark v:35 is a combo. So it’s the stock black shadow either way it’s plenty loud on a stage or an iso cab.
- qjawz
- Post #9
- Jan 19, 2023
- Forum: Axe-Fx III Discussion
Axe FX III 4cm Mark V 35 Opinions?

My 2cents here. I also have the mark V:35 and I have run 4cm in the effects loop which is a little cumbersome because midi out doesn't work to the Mark V Din adapter. So I have to use the channel switcher. With that being said, I tend to run into the front of the channel 1's fat channel and it...
- qjawz
- Post #7
- Jan 19, 2023
- Forum: Axe-Fx III Discussion
Mesa Lonestar model voicing switch?

+1000 for this.
- qjawz
- Post #13
- Dec 1, 2022
- Forum: Axe-Fx III Discussion
Halcyon overdrive adaptive circuitry

I’ll give that a shot maybe it’ll get in the ballpark!
- qjawz
- Post #5
- Nov 23, 2022
- Forum: Axe-Fx III Discussion
Halcyon overdrive adaptive circuitry

My bad I should’ve posted this instead of the position 2 “This enables the Adaptive circuitry, allowing the pedal’s mid-forward voicing to gradually fade away as the pedal cleans up. This gives you classic TS808 tone with your guitar cranked but reveals the full spectrum of your clean tone as...
- qjawz
- Post #3
- Nov 23, 2022
- Forum: Axe-Fx III Discussion
Halcyon overdrive adaptive circuitry

Hi all, anyone have any suggestions on how something like the adaptive circuitry in the halcyon might be imitated in the axe fx? Here is the description in its position 2 mode. “Full adaptive behaviour. The pedal’s treble and bass roll-off will be reduced significantly as it cleans up, for a...
- qjawz
- Thread
- Nov 23, 2022
- Replies: 5
- Forum: Axe-Fx III Discussion
IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

I would love a 2x12 lonestar there’s very few in the IR world
- qjawz
- Post #1,234
- Oct 29, 2022
- Forum: Vendors
Unity gain possibility for out 2

Thank you for the response!! Good idea! Much appreciated both of you!
- qjawz
- Post #4
- Aug 30, 2022
- Forum: FM9 Discussion
Unity gain possibility for out 2

Hello, this is a question for @m_brown and or @Admin M@ is it possible to get out 2 to operate as out 3 on the FM9? I run my pedals through the morning star ML5 so that eats up I/O 3. I can run I/O 2 to the front of my physical amp but getting unity is always such a pain. Could this be possible...
- qjawz
- Thread
- Aug 30, 2022
- Replies: 3
- Forum: FM9 Discussion
The 300th amp model?!

+10000000
- qjawz
- Post #176
- Aug 7, 2022
- Forum: Axe-Fx III Discussion
FM9 Firmware Version 2.01 public beta

Thanks for the bug fixes. I have a pop when switching to any preset. Anyone else. EDIT:Amps set to mute are popping. Amps not set to mute and instead thru those presets don't pop.
- qjawz
- Post #73
- Apr 1, 2022
- Forum: FM9 Discussion
Adding a Tuner Stompbox to FM9 Rig

The precision as stated is there. Upon reading the manual you can turn the offsets on and off…
- qjawz
- Post #28
- Mar 18, 2022
- Forum: FM9 Discussion
Adding a Tuner Stompbox to FM9 Rig

I Not sure if it’s been said but you can offset tunings easily in all fractal products. The little wheel on the FM9 tuner is extremely accurate, so accurate that when compared to my Peterson that I use (only for setups and intonation) the results are near identical. That being said I personally...
- qjawz
- Post #14
- Mar 16, 2022
- Forum: FM9 Discussion
FM9 Firmware Version 2.0 public beta

It would be great to get one of the final betas in the meantime so my FM9 might be less sluggish when changing scenes…but alas this is not the flagship.
- qjawz
- Post #747
- Mar 8, 2022
- Forum: FM9 Discussion
Need advice

Sorry if there is any confusion. Edited Op
- qjawz
- Post #5
- Nov 5, 2021
- Forum: FM9 Discussion
KLON Drive Settings

I agree this one is the closest to my tumnus.
- qjawz
- Post #18
- Nov 5, 2021
- Forum: FM9 Preset Exchange
Need advice

Edit: pictures Hi everyone, I have been loving the fm9. Currently, I’ve been using out/in 3 with a few overdrives using a Morningstar ML5 for switching based on scenes and then either out to FOH or into the front end of my mark 5:35 (fat channel edge of breakup is divine). Both sound routes...
- qjawz
- Thread
- Nov 5, 2021
- Replies: 4
- Forum: FM9 Discussion
Axe-Fx Firmware Release Version 17.01 Public Beta #2

Also if you remove the modifier from the input boost. Save. Then change to a different preset the modifier is back on and the input boost is also engaged...is anyone else experiencing this?
- qjawz
- Post #215
- Oct 14, 2021
- Forum: Axe-Fx III Discussion
Axe-Fx Firmware Release Version 17.01 Public Beta #2

I have a control switch setup on my FC (set to momentary) to engage a input boost (set to shimmer) in the amp block. I'm using a global block...some presets are showing it automatically engaged. Only way to disengage it is to engage the FC switch. Save. Change preset go back its auto engaged...
- qjawz
- Post #196
- Oct 13, 2021
- Forum: Axe-Fx III Discussion
Possible bug

I transferred my kitchen sink preset from my Axe Fx III to my FM9. I know things won’t be perfect but I was in the Cpu limit between the two units. What I noticed is that levels on let’s say for example a 1k boost with a gain level of 1dB will be a .06 in a parametric eq. Same thing in the delay...
- qjawz
- Thread
- Oct 10, 2021
- Replies: 0
- Forum: Axe-Fx III Discussion
Global blocks

Is there a possibility of adding global blocks in the future? @FractalAudio @Admin M@
- qjawz
- Thread
- Oct 9, 2021
- Replies: 0
- Forum: FM9 Discussion
Joe Bonamassa Fractal or dis?

Looks like an fc on the ground
- qjawz
- Post #35
- Oct 8, 2021
- Forum: The Lounge
Comparing Tube Screamer Models

Interesting. Not to bring derail the conversation but I have a simple kitchen sink preset and actually planned on adding a few boutique drives to the front input but you’re suggesting it’s better to 4CM it. Is there a difference in sound? Would the same setup work if I added a amp (Wouldn’t do...
- qjawz
- Post #146
- Oct 2, 2021
- Forum: Axe-Fx III Discussion
Announcing Axe-Fx III Mark II TURBO

Congratulations. Apple...I mean Fractal. 😂😂😂
- qjawz
- Post #156
- Sep 29, 2021
- Forum: News
AITR

This sounds awesome! If you can accommodate a mark I user I’ll gladly take it for my studio use.
- qjawz
- Post #520
- Sep 11, 2021
- Forum: Axe-Fx III Discussion
Axe-Fx III 16.00 Beta 11 "Cygnus" Firmware - Public Beta #8

Has the jp2c yellow always be 2.90. I thought they set the internal input drive to 7.5 in the actual amp?
- qjawz
- Post #189
- Mar 28, 2021
- Forum: Axe-Fx III Discussion
Axe-Fx III 16.00 Beta 5 "Cygnus" Firmware - Public Beta #2

Enough gain? It’s a legend for a reason...
- qjawz
- Post #533
- Mar 13, 2021
- Forum: Axe-Fx III Discussion
Amps with great dynamics for live use?

Matchless dc-30 get some York audio irs and go to town. 1.5 on the input drive and MV on 10
- qjawz
- Post #2
- Mar 12, 2021
- Forum: Axe-Fx III Discussion
I'll never understand what makes it so difficult...

Biggest problem I hear people it doesn’t sound like an amp in the room, it doesn’t bloom, blah blah...that’s cause a mic’d up amp doesn’t sound like it’s in a room.
- qjawz
- Post #52
- Mar 9, 2021
- Forum: Axe-Fx III Discussion
Wish Triaxis LD1 green and yellow

Any chance the mark 1 feel can be added :) Or even like FAS amp version Would be amazing!
- qjawz
- Thread
- Mar 1, 2021
- Replies: 3
- Forum: Axe-Fx III Wish List
Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

EXACTLY.
- qjawz
- Post #1,178
- Feb 25, 2021
- Forum: Axe-Fx III Discussion
Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

I am head over heels with the feel and response of this. Game changer for real. Been playing nonstop. The Dumble and tweeds have me head over heals. The IIC+ is twice the amp model it used to be. I cannot put my guitar down.
- qjawz
- Post #1,176
- Feb 25, 2021
- Forum: Axe-Fx III Discussion
Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

Mesa got sold to Gibson I think so could be connected.
- qjawz
- Post #292
- Feb 20, 2021
- Forum: Axe-Fx III Discussion
Unable to reamp Axe-Fx 3

Go to setup and audio in the axe fx and change the audio source to digital. In your DAW put the output of the track to 7 and 8. You can test this by playing the track DI your axe fx should play audio back processed.
- qjawz
- Post #3
- Feb 15, 2021
- Forum: Axe-Fx III Discussion
Implemented Controller channels

Yup, thanks Chris! I guess I didn’t look hard enough haha I saw control switch but I didn’t even think to look under effects!
- qjawz
- Post #17
- Nov 11, 2020
- Forum: Axe-Fx III Wish List
Implemented Controller channels

THANK YOU!
- qjawz
- Post #14
- Nov 10, 2020
- Forum: Axe-Fx III Wish List
Implemented Controller channels

To avoid any confusion...This is what I meant. I'm sorry for not being clearer. Thanks for the replies thus far. I want to change this channels from the FC-12.
- qjawz
- Post #10
- Nov 10, 2020
- Forum: Axe-Fx III Wish List
Implemented Controller channels

I want to switch the channels without the use of scenes from my FA12
- qjawz
- Post #6
- Nov 10, 2020
- Forum: Axe-Fx III Wish List
Implemented Controller channels

Is it possible to add channel switching to the FA for the controller switch?
- qjawz
- Thread
- Nov 10, 2020
- Replies: 22
- Forum: Axe-Fx III Wish List
Wish Matchless DC30 EF86 channel and Jumpered (channels) DC30 models

This. Yes. Please.
- qjawz
- Post #26
- Sep 29, 2020
- Forum: Axe-Fx III Wish List
13.01 possible bug

Maybe the drive update shot it over it was usually the CPU? I reinstalled the firmware 12.14 went back to 13.01 no problems now..so Idk. Thanks for taking a look.
- qjawz
- Post #5
- Aug 17, 2020
- Forum: Axe-Fx III Discussion
13.01 possible bug

Thank you for responding. Changing the cabs on my end had no effect if I change to my scenes other I would get sound back but whenever drive 2 was enabled the sound would pop and it wouldn't return unless I changed to scene 1, 2, or 5
- qjawz
- Post #3
- Aug 15, 2020
- Forum: Axe-Fx III Discussion
13.01 possible bug

I just updated..as you can see in the preset I have an AC20 in channel B all I did was change my gain enhancer to 1.00 and save...then I heard a pop and now drive 2 in the chain won't doesn't have any output when I switch scenes (scenes 3 and 4)..please note I forgot to add some other cab so a...
- qjawz
- Thread
- Aug 15, 2020
- Replies: 6
- Forum: Axe-Fx III Discussion
Can someone check this for me?

Thank you Poparad. I appreciate it.
- qjawz
- Post #3
- Jul 2, 2020
- Forum: FM3 Preset Exchange
Can someone check this for me?

Hey all, can anyone tell me if my main full axe3 preset can transfer to the fm3 with no hiccups?
- qjawz
- Thread
- Jun 22, 2020
- Replies: 2
- Forum: FM3 Preset Exchange
Incredible resource for comparing dialed-in amp tones

He said he would include the line 6 HELIX as a bonus "27th" amp for comparison. I don't think that makes it an advertisement.
- qjawz
- Post #9
- Feb 27, 2020
- Forum: Axe-Fx III Discussion
Need tone help. Reducing pick attack?

What pick do you use? Harder the density and even the sharpness of the influence pick attack.
- qjawz
- Post #14
- Feb 21, 2020
- Forum: Axe-Fx III Discussion
Jumping amp

Awesome thanks guys! [Edit]:I got a great result by putting the amp blocks in series with channel 1's 12ax7a supply sag off and channel 2 8f86 input trim to 0.5. Mixed to taste! Kudos
- qjawz
- Post #8
- Feb 11, 2020
- Forum: Axe-Fx III Discussion
Jumping amp

Thanks I’ll try that!
- qjawz
- Post #3
- Feb 10, 2020
- Forum: Axe-Fx III Discussion
Jumping amp

Hey folks, how would I theoretically jump the dc30 in the axe fx? The two amp blocks 1 channel each in parallel? Or 1 amp block into the other? thanks in advance.
- qjawz
- Thread
- Feb 10, 2020
- Replies: 7
- Forum: Axe-Fx III Discussion
JP-2C Gain and Presence Pull question.

Hey there, I don’t think presence shift would have nothing to do with it unless you are replicating specific settings. However on the real amp they have stated it’s a subtle change in the input drive IIRC it’s like 1.25 for channel 2 and 1.5 for channel 3 but take that as a grain of salt.
- qjawz
- Post #2
- Feb 7, 2020
- Forum: Axe-Fx III Discussion
Who all is running out of CPU?

So I cover most p&w songs with a kitchen sink preset I don’t have any cutouts like you’re talking about. How many gain stages do you actually use? I run 3 drives and stack for a lead. 2 reverbs high. 3 delays. Chorus, comp, pitch, plex. 2 irs on max and I’m about 85%...I really don’t have any...
- qjawz
- Post #82
- Dec 23, 2019
- Forum: Axe-Fx III Discussion
SKB Travel Case for Axe-Fx III and FC-12

The ev1 is 4.25” and the FC12 is 20.2 I doubt it will fit when I used my Gator g tour pedal board case just barely accommodated those. I actually had to slightly bend the metal on the pedalboard part to make it fit.
- qjawz
- Post #51
- Dec 12, 2019
- Forum: Axe-Fx III Discussion
SKB Travel Case for Axe-Fx III and FC-12

I used to use 2 separate cases the gtour 24 inch one and a 3u rack it worked. However I prefer one trip from my car to the stage so it doesn’t bother me.
- qjawz
- Post #38
- Dec 11, 2019
- Forum: Axe-Fx III Discussion
SKB Travel Case for Axe-Fx III and FC-12

s promised...so basically there is a insert that comes with it I modified it and took all the foam off except the corner parts to make it sit in there properly. It fits perfectly like that.
- qjawz
- Post #37
- Dec 11, 2019
- Forum: Axe-Fx III Discussion
SKB Travel Case for Axe-Fx III and FC-12

It’s pretty heavy I run a power conditioner, rack panel, and have all my cables in it. I’d say if I was guessing 60lbs but I’m not sure. It does have wheels and is really convenient for my setup and life. ...but I’m sooooooooo sorry. I forgot as I was leaving the church but I can get a picture...
- qjawz
- Post #33
- Dec 8, 2019
- Forum: Axe-Fx III Discussion
SKB Travel Case for Axe-Fx III and FC-12

No, but if you buy the kemper version you can make it work. I did exactly that and outlined the spots for my ev1 and FC12 on the pedalboard part and cut them out along with removing the foam from the pedalboard so it would fit. It works great. I can post a picture of the pedal board part later...
- qjawz
- Post #30
- Dec 8, 2019
- Forum: Axe-Fx III Discussion
IRs York Audio presents the MTCH 212 in .Wav format based on Matchless!

These are AMAZING! Clarity! I love the blends!
- qjawz
- Post #40
- Dec 4, 2019
- Forum: Vendors
Axe-Fx III Firmware Version 11.00 Public Beta

Stay on the 11b then your sonic continuity of your old presets don’t change and you have the best of both worlds. I think it’s stable enough. My 50+ presets are amazing after going to 11b and I unfortunately had to go through and change most of them. I gladly embrace the change.
- qjawz
- Post #519
- Nov 12, 2019
- Forum: Axe-Fx III Discussion
FC Internal Firmware 1.08

Thank you @BryantP sorry on my part I didn't pay attention to the dates
- qjawz
- Post #14
- Jul 11, 2019
- Forum: FC-12 and FC-6 Controllers
SKB Travel Case for Axe-Fx III and FC-12

I would be interested in this. Would there be a wait list of sorts for this?
- qjawz
- Post #13
- Jul 11, 2019
- Forum: Axe-Fx III Discussion
FC Internal Firmware 1.08

That video should probably be removed from this thread so people don't continue to make the same mistake as I followed suit. My FC got stuck in failsafe and even doing the above method with FractalBot 3.0.1 I kept getting a timeout error. I had to load 1.06 back up to get out of that and have...
- qjawz
- Post #12
- Jul 9, 2019
- Forum: FC-12 and FC-6 Controllers
FC Controllers Now Shipping!

Just ordered. Thanks FAS!! 5/17 3:41 EST
- qjawz
- Post #677
- Feb 22, 2019
- Forum: FC-12 and FC-6 Controllers
FX on III to FX8?

Hey all, So would anyone with an FX8 be able to tell me if you can run the FX blocks settings in my Axe Fx III patch on a FX8 I'm thinking about picking one up. It would be blocks: Comp Flang Drive 1 Volume Delay 1 Multidelay 1 Pitch 1 Reverb 2 on high Without hitting the limit or having...
- qjawz
- Thread
- Nov 15, 2018
- Replies: 0
- Forum: Axe-Fx III Discussion
44.1 to 48

Thank you so much both of you. You have calmed my anxiety. lol :D Good thing dimension strings apart of the package I'm getting. The only thing suplemental is the mir Pro and the VI pro player. Thanks again cheers!!
- qjawz
- Post #4
- Oct 9, 2018
- Forum: The Lounge
44.1 to 48

Hey guys, So I've been looking to buy some orchestral samples for myself. I'm finishing up my composition degree and some of my music production classes went over nyquist but to be honest I still have a hard time understanding it. From what I do understand is there are bad frequencies that tend...
- qjawz
- Thread
- Oct 8, 2018
- Replies: 3
- Forum: The Lounge
Nektar Pacer....thoughts?

Here you go using Syslibrarian Cheers
- qjawz
- Post #31
- Sep 27, 2018
- Forum: Other MIDI Controllers
Nektar Pacer....thoughts?

Here is the axe fx patch
- qjawz
- Post #29
- Sep 26, 2018
- Forum: Other MIDI Controllers
Nektar Pacer....thoughts?

Sorry I didn't respond quicker. I run a mac. I was able to figure out how to dump it using logic. It's a midi file the manual tells you how to restore it. I don't know how to export it to a sys but whatever the case the information is in there.
- qjawz
- Post #28
- Sep 26, 2018
- Forum: Other MIDI Controllers
Nektar Pacer....thoughts?

Not being condescending, but is cc49 the matching value on the Axe Fx II? I don't have one to verify. Also make sure on is 127 and off is 0. I'd do a midi dump of the patch but I can't seem to get my daw to record the sys of the Pacer patch..as there is no other way to do that but doing it...
- qjawz
- Post #26
- Sep 16, 2018
- Forum: Other MIDI Controllers
Nektar Pacer....thoughts?

If I can extract the patch and post it here I will I'll look. Basically I have it set for Patch A1 FS1-5 as program changes that switch my scenes. FS6 is tap tempo FSA is Delay 1 FSB is Delay 2 FSC is Multi delay 1 FSD is Reverb 1 Channel C on the first tap and the second Channel D Patch A2 is...
- qjawz
- Post #22
- Aug 22, 2018
- Forum: Other MIDI Controllers
Nektar Pacer....thoughts?

I got the pacer on Saturday programed it and used it on Tuesday for my Axe Fx III. It worked really good, I just wish it had midi in/thru....which ever one communicates back to the pedal haha. I found myself having to switch things back off in order to really know what was on if that makes sense...
- qjawz
- Post #21
- Aug 22, 2018
- Forum: Other MIDI Controllers
Axe-Fx III wait list: Let us know when you get notified...

And my number was finally called :) Waitlist Confirmed 1/29 - 12:21 PM EST Invite 4/12 - 4:36 PM EST Ordered 4/12 - 4:43 PM EST Cheers!!!!!!!
- qjawz
- Post #1,600
- Apr 12, 2018
- Forum: Axe-Fx III Discussion
Axe-Fx III wait list: Let us know when you get notified...

12:21pm Eastern cannot come any faster.
- qjawz
- Post #816
- Mar 22, 2018
- Forum: Axe-Fx III Discussion
AFIII Canadians playing Separate Ways using the AxeFx III

Sweet!!
- qjawz
- Post #52
- Mar 12, 2018
- Forum: Fractal Recordings
Axe 8 Tuner - 8 ball

I think it is. I'm not questioning that, I just found that the 8-ball to be super valuable. Cheers
- qjawz
- Post #3
- Aug 28, 2017
- Forum: AX8 Wishes + Bugs
Axe 8 Tuner - 8 ball

Not sure if this has been discussed before...but is it possible to get the same "magic 8 ball" in the tuner of the axe fx on axe 8 as well? Cheers
- qjawz
- Thread
- Aug 26, 2017
- Replies: 2
- Forum: AX8 Wishes + Bugs
Fx loop 4CM

Thanks Bakerman.
- qjawz
- Post #3
- Jul 12, 2017
- Forum: Axe-Fx II Discussion
Fx loop 4CM

Hey community, I've had my Axe fx for quite a number of years and I'm pretty stump to know if I'm running the proper levels. Recently I acquired a new mesa head and I have been trying really hard to get fx loop to work properly with axe. I have done the necessary things (put FX block where I...
- qjawz
- Thread
- Jul 7, 2017
- Replies: 3
- Forum: Axe-Fx II Discussion
Axe-Fx II "Quantum" Rev 7.00 Public Beta #2

Didn't try the last beta. But I went from 6.03 to this beta 2 and welL 6.03 was amazing but this 7 beta 2 is delicious. That's all I can say. USA amps for the win!!!
- qjawz
- Post #202
- Feb 10, 2017
- Forum: Axe-Fx II Discussion
Axe Fx Changing Patches On It's Own

Np man
- qjawz
- Post #4
- Feb 9, 2017
- Forum: Axe-Fx II Discussion
Axe Fx Changing Patches On It's Own

I've had this happen. It would change from the axe fx and not the mfc...so in other words the original patch was 4 and it would move up on my axe to 5 but still show patch 4 on my mfc....long story sort turned out my main knob(the big one) on my axe fx was in between "clicks" and so it was...
- qjawz
- Post #2
- Feb 9, 2017
- Forum: Axe-Fx II Discussion
Axe Fx for my mac

I want this..but Axe Fx.
- qjawz
- Post #32
- Jan 25, 2017
- Forum: Plug-Ins
Axe Fx for my mac

I hope it's not scrapped. I'm still wishing and hoping here.
- qjawz
- Post #24
- Jan 6, 2017
- Forum: Plug-Ins
Wish Better tuner for AX8 and other (AXE, FX)

I don't know if the the ax8 has the magic 8 ball. But use it. It's just as good as a strobe Peterson. In fact I've intonated using it and checked it with my Peterson strobe and it's they're nearly identical. Always use your neck pickup when tuning.
- qjawz
- Post #19
- Dec 22, 2016
- Forum: AX8 Wishes + Bugs
MFC 101 Board Flickering

I have a mark II mine actually did this 2 week ago. I changed my ethercon cable and it hasn't done it since.
- qjawz
- Post #2
- Dec 20, 2016
- Forum: MFC Discussion
XL+ vs. FX8

I think I've read the axe 8 and the Fx8 aren't the same but I'm not sure about an II/XL/+. It'd be interesting to know. @FractalAudio
- qjawz
- Post #4
- Nov 21, 2016
- Forum: Axe-Fx II Discussion
Metal Patch - Can't Get Rid of Tube Squealing

Well....that is an extremely bright patch. Umm assuming your not talking about the micro phonic squeal that's there because of the brightness of the patch and more so the hum/hiss that happens if you disable your gates. To remedy that hum I used the input gate rather then separate gates and on...
- qjawz
- Post #2
- Nov 15, 2016
- Forum: Axe-Fx II Preset Exchange
Axe-Fx II "Quantum" Rev 6.00 Firmware Released

While I would've been happy with a final bug release only fix. Thank you Cliff and Co. Rest those hands of yours now. Thank you again!!!
- qjawz
- Post #54
- Nov 15, 2016
- Forum: Axe-Fx II Discussion
Polyphia

Hey guys I'm a big polyphia fan and love there tone. I was searching the interwebs and found this guys patch and it sounds phenominal!!! Give this guy some credit and check it out! http://axechange.fractalaudio.com/detail.php?preset=4168 Cheers!! BTW if anyone has a matching rhythm patch for...
- qjawz
- Thread
- Nov 14, 2016
- Replies: 5
- Forum: Axe-Fx II Preset Exchange
What will you do when no more firmware updates?

Play my guitar.......instead of worrying about firmware.
- qjawz
- Post #95
- Oct 19, 2016
- Forum: Axe-Fx II Discussion
Axe-Fx II "Quantum" Rev 4.01 Public Beta

I can't test this right now..is this a bug?
- qjawz
- Post #622
- Oct 12, 2016
- Forum: Axe-Fx II Discussion