Search results for query: *

  • Users: jamn4jc
  • Content: Threads
  • Order by date
  1. jamn4jc

    Atomic CLR vs. Bose S1 Pro for Home/Studio?

    Anyone used or compared both of these (Atomic CLR and BOSE S1 Pro)? I am a long-time CLR user, but after 3 bad power-amps and challenges with getting repairs or replacements, I am looking for something else to use in my home/studio setup that I use to dial in the tones and create presets.
  2. jamn4jc

    Setlist for only preset order… don’t need sections

    I just need to pull up presets in a specific order. Once a preset is loaded, I want to use scenes in the active preset and not have to map out sections. Can I do this with a Setlist? Today, I use Manage to re-arrange presets, but am hoping Setlist make this a little simpler. I always load scene...
  3. jamn4jc

    Mini-Display Always Shows Press (Not Hold) Name (BUG???)

    Is this expected behavior, or a bug? Running Firmware v4. I have a footswitch configured to select Scene 1 on PRESS and Scene 5 on HOLD. The mini-display for both functions is configured to display the NAME. When I hold the switch I see the name of Scene 5 (as expected), however when I release...
  4. jamn4jc

    Studio Slip for FM9

    Studio Slips has a carry bag for the FM9. Already ordered! https://studioslips.com/proddetail.php?prod=INVFractalAudioFM9GigBag
  5. jamn4jc

    Wish Vibrato (wish for dedicated)

    Followed the advice in this thread to get a nice vibrato sound. https://forum.fractalaudio.com/threads/vibrato-effect.133799/#:~:text=There's%20no%20dedicated%20Vibrato%20effect,in%20series%20before%20the%20Amp Some feedback (use or toss)... I monitor and manage several large Facebook groups...
  6. jamn4jc

    How to Access Other Layouts from OMG9

    I normally use the FM3+FC-6 and the OMG9 setup. Tomorrow, I have an outing and want to use only the FM3 and be able to access the factory layouts for presets and scenes. I cannot figure out how to get to the other layouts once I am in the OMG9. I've reviewed the FM3 manual and Switch Guide and...
  7. jamn4jc

    Would an XLR with phantom power damage the input?

    At my church we are constantly rotating EG players from Sunday to Sunday and some players run Iridiums that just need 1/4 and DI. Some have Axe-FX or FM-3 that would just need XLR and would bypass the DI. If that DI is powered by phantom power would it be safe for the Axe FX or FM-3 to plug that...
  8. jamn4jc

    Control Switch Always On When Changing Scenes

    I want to increase amp "input drive" on demand. So, I configured an FC-12 button as a latching control switch (CS1). I assigned CS1 as a modifier to the amp's input drive with Min and Max values (3 and 5). When I switch scenes, the CS1 is always ON (at MAX) regardless of the state when I save...
  9. jamn4jc

    I can't relate.. maybe you can.

  10. jamn4jc

    Signature Required?

    My FM3 was just delivered by UPS. I was expecting to have to sign for the package. UPS rang the doorbell, but did not require a signature and left it at the door. I could be wrong, but I thought there was an additional charge for this service (signature). Maybe COVID has changed the rules?
  11. jamn4jc

    New Posts - What's the difference?

    What is the difference between the "What's new" and "New posts" menu options in the New posts section of the forum? They appear to be the same/similar.
  12. jamn4jc

    2290 delay - no repeats

    I am not getting any repeats when I use the 2290 delay. All other delays produce a repeat. In SETUP: I/O Audio I have "SUM L+R" (Summed Mono). Per the Owner's Manual, this can lead to artifacts or even total cancellation. Is this one of those cases? If the cancellation is expected or a result...
  13. jamn4jc

    How do I... stomp/IA for block and channel

    My end goal is to have an on-demand "shimmer effect". My current approach and requirements are described below. Looking for any implementation details. I have a Plex Delay in my chain that uses channels A, B and C. Channels A and B are engaged as needed via Scenes. I have a Shimmer (Plex...
  14. jamn4jc

    Scene Revert Behavior

    I keep losing changes made to scenes via Axe-Edit III. If I activate a block, or select a new channel, then go to another scene and come back, I often lose the change(s). I say "often" because it does seem to be a bit intermittent. I did not have this issue at all on the II, so the behavior...
  15. jamn4jc

    FC-12 - Scene Display Name not Updating

    I have a Scene named "Drive+". If I rename that to just "Drive" (drop the "+") in Axe-Edit, the displayed name on the FC-12 does not update. As a workaround, I enter another value (e.g. "dd"), then type in "Drive" and the display updates.
  16. jamn4jc

    Kemper NAMM 2019 (fake news)

    Saw this on a Facebook group. I recognize a portion of the controls.
  17. jamn4jc

    AX8 (10.01) pop when changing scenes

    I loaned my AX8 to a couple of guys that are HUGE champions of the Line 6 Helix. These guys have probably sold hundreds (thousands?) of units based on their reviews, playthroughs and presets. They are having the issue described below with the AX8. We've done quite a bit of troubleshooting, but...
  18. jamn4jc

    [SOLVED] No Sound With Send Return Blocks

    I want to use the Send and Return blocks to extend my signal chain. If I replace the Send with Out 1, I get sound. I have this working just fine with my Axe-FX II. I'm probably missing something simple.
  19. jamn4jc

    Facebook Groups

    There are numerous Facebook groups using "Fractal Audio" in the title. Some are decent, some are not. I'm guessing many/most of these are not official groups run by Fractal and are just people "squatting" on the name. I'm just curious if Fractal Audio has any way to protect its name, image and...
  20. jamn4jc

    How Many Presets Per Song In Song Mode

    There appears to be a typo in the MFC manual v3. It states "Up to Presets may be added to each Song", but doesn't say how many presets. Expecting it to say "Up to X Presets". How many presets can be used when in a song mode?
  21. jamn4jc

    What's different - same amp block AX8 to Axe-FX XL

    Both devices are running Q9.04. I dialed up a /13 FT37 Lo on the AX8 and LOVE it. I'm using factory cab F084: 1x12 Division 13 Mix on both. I exported the block from the AX8 and imported that block in to my Axe-FX XL. They simply don't sound the same - the gain structure is different and the XL...
  22. jamn4jc

    Using Different Guitars With Different Output

    I've been through a lot of threads, some new, some old on this topic and am looking for a sanity check. I've got various guitars with different output levels. I want to preserve the gain structure in my presets and if possible, avoid creating different presets for different guitars I play once...
  23. jamn4jc

    SOLVED: External Switch to Engage/Bypass Drive 1

    Not sure if this belongs here, or in the MFC forum. Feel free to move, if needed. I have been able to configure an external switch for tap tempo, but am struggling to get another switch to engage/bypass a drive block. Here is what I have done: - no changes on the Axe-FX XL - confirmed MIDI CC...
  24. jamn4jc

    AXE-FX - repair turn around estimate?

    I'm getting MFC timeouts and think I have it narrowed down to the Ethercon port on my XL. I'm thinking of sending the unit in for repair. Any estimates of the turn around time so that I can plan accordingly? Just curious... has anyone been able to repair/rectify this without sending the unit in...
  25. jamn4jc

    Minimum Ethercon Length?

    Just purchased a FASLink XA-2 to connect my Axe-FX XL to a Mark II MFC. I'm thinking of purchasing a short (i.e. 1 foot) Ethercon cable to connect to the MFC. Does anyone know if there is a minimum length to ensure reliable communication? My guess is that there isn't a lot of data going back and...
  26. jamn4jc

    R2R cracks Helix Native

    So, it looks like R2R has already cracked Helix Native. This is why we can't have nice things. Probably another reason we'll never see a plug in version for Fractal.
  27. jamn4jc

    Thoughts on Suhr Alt T Pro

    Please delete if not an appropriate post. Looking at a 2017 with alder body and rosewood fretboard. On the fence with adding another guitar to the collection. I have a Tele, but not a Thinline. This would also be my first Suhr. I have a lot of other bases covered (LP, Strat, Gretsch, Jazz...
  28. jamn4jc

    Why use Control Switches vs. Scenes

    @Glenn DeLaune has mentioned Control Switches a couple of times. I wasn't familiar with this feature, so I reviewed the user manual. Now, I'm wondering what the use case is for using a Control Switch vs. a Scene. It seems that they have pretty much the same functionality. Is it a way to get more...
  29. jamn4jc

    New Tube Amp Sales vs. Digital Equivalents?

    I love a good tube amp and still own several. However, they are no longer a part of my daily workflow. I also own vinyl records and CDs, but almost always listen to MP3s. There are some similarities there. Purists still seek vinyl, but I'm sure digital music sales reign supreme. That has me...
  30. jamn4jc

    Export a Single Block?

    I want to use a few effects blocks in presets on my AX8 with my Axe-FX XL. Is there a way to export just a SINGLE block out of AX8-Edit? I know that I can use the "Save As Blocks In Library" to export all of the blocks.
  31. jamn4jc

    FX8 CPU - disappointing out of the box experience

    I'm sure it's been beat to death, but I'm trying to get help quickly and don't have a lot of time to dig. A Facebook friend with a lot of weight/pull in a large gear forum that I contribute to just bought 2 FX8s for their church. His out of the box experience is not good. The forum loves Kemper...
  32. jamn4jc

    Where can I get AX8 Edit 1.5?

    I recently reverted back to Quantam 4 on the AX8, so now I need AX8 Edit v1.5. There used to be a site with all of the legacy software, but I can't find the link. Any help appreciated.
  33. jamn4jc

    Atomic CLR - no longer being sold?

    I'm afraid I know the answer to this... is Atomic no longer selling the Active Wedge (not Neo)? The only speaker I see available on their website is the active Neo wedge. That's a lot of other options that are no longer available. My Atomic CLR Active Wedge is on the fritz and I was hoping to...
  34. jamn4jc

    Preset and Cab Bundle Confusion

    I want to be sure to not break any copyright rules. If I create a preset that includes a 3rd party IR then export that as a Preset + Cab Bundle, is another user then able to both use (audition) and save that IR? Basically, is this the same as sending them the IR file (which is bad if they do not...
  35. jamn4jc

    Helix Firmware 2.0 Adds "Snapshots"

    It's been fun showing Scenes to all my Helix friends. Today, Line 6 added "Snapshots" to the Helix (firmware 2.0). I must admit that they look very cool. My understanding is that EVERY value for every parameter is captured in a snapshot. If that's the case, it is a very powerful feature. We can...
  36. jamn4jc

    AX8 skipped POST and locks up

    Has anyone had this happen before? I had something very weird happen tonight. Powered on the AX8. It skipped the Power On Self Test and went straight to the display. The light on the first rotary knob was EXTREMELY bright, and the unit was locked up. I did 4-5 power offs and was looking up how...
  37. jamn4jc

    Global Parameter: Amp Gain

    I understand the what and why of the "Amp Gain" setting, but would like to understand the how. If I'm looking at the simplified amp diagram with the different sections (input, drive, preamp, poweramp, etc...) where does the Amp Gain setting come in to play? Is it occurring before the amp input...
  38. jamn4jc

    Q3.02 and AX8 Edit Odd Behavior

    I upgraded to Q3.02 and the latest AX8 Edit this morning. I'm loving the interface updates and the MIDI functionality working as it should. However, I ran in to odd behavior a couple of times. Closing AX8 Edit and/or restarting the hardware clears the issue, but it has happened more than once...
  39. jamn4jc

    AX8 MIDI send channel always 16

    I am using the AX8 to control an Eventide H9 via MIDI. I was having issues so I connected the AX8 to my computer and fired up MIDI-OX. I found that regardless of what MIDI channel was designated in the "Scene X Ch" on the MIDI page, the AX8 *always* transmitted changes over channel 16. I could...
  40. jamn4jc

    Using Scenes to Send MIDI PC

    This appears to a BUG (reported). I have an Eventide H9 in the effects loop and I'm trying to recall H9 presets via MIDI PC messages sent via scene changes. Scene 1 is sending MIDI changes and calling up the assigned preset, so that verifies that I have a good connection and the devices are...
  41. jamn4jc

    AX8 amp block as a drive only (no power amp)

    After a hiatus from the Axe-FX, I'm back with the AX8. I'm currently running the AX8 as effects only in to the front input on a tube amp and cab and and not using an amp or cab block in the grid. However, to reduce the CPU load, I want to use an amp block to provide some overdrive/distortion. In...
  42. jamn4jc

    Need ideas for running outboard effects

    I'm thinking about running a couple of drive pedals and possibly reverb in addition to the AX8. I'm sacrificing some of the simplicity of the unit, but think I can rectify that with a loop switcher, preferably one that is programmable and that accepts MIDI PC to engage or bypass loops and...
  43. jamn4jc

    CPU usage - does order in which you add to the grid matter?

    I was building a preset yesterday that had the CPU usage up around 87%. The preset included the Pitch block and that seemed to be causing some issues. I was trying to add a Compressor to the grid and kept getting denied due to CPU utilization. I eventually determined that if I add the Comp block...
  44. jamn4jc

    BB Pre and AX8 Drive Comparison

    I'm probably preaching to the choir, but the drives in the AX8 are the real deal. I sold my Axe-FXII before G3 and Quantam and always struggled to get a drive sound that I was 100% happy with. When I got the AX8, that is the very first thing I dove in to. The results weren't immediate, but they...
  45. jamn4jc

    Play in amp drive control knob

    Got the AX8 for Christmas and opened it today. Definitely a thing of beauty. However, I did notice that there is more play in the amp DRIVE control knob/dial than in the other dials. It almost feels like a loose tooth in the amount of play/wiggle that is present. The other dials have just a...
  46. jamn4jc

    FAS needs a BigSky killer

    I would love to see a FAS Reverb pedal that is a a BigSky killer. The BigSky sounds amazing, but Strymon wraps it in the worst technology. I get frustrated and annoyed when they release pedal after pedal in the same outdated chassis. The Strymon Librarian is a joke. No editor. There is so much...
  47. jamn4jc

    Matt's new avatar

    Will admit, it's got me pretty pumped up. Any day now.
  48. jamn4jc

    Old Forum vs. New Forum - tracking threads

    In the old forum, you could subscribe to a thread. Subscribed threads could also be organized in to folders to make things easier to find. In the new forum, I can "Watch" a thread, but there isn't a way to organize them. Does this capability exist in the new forum? There is so much good...
  49. jamn4jc

    What is the "8" in AX8?

    I am assuming this is the number of blocks allowed per preset. However, I couldn't confirm that by reading the product page. I did see that it has the same 4x12 grid as the Axe-FX. The reason that I'm asking is that I'm waiting on an Ax8, but found a good deal on on Axe FX plus MFC. I am aware...
  50. jamn4jc

    spring option on Mission Engineering EP-1

    I have an EP-1 with the spring option and would like to remove the spring. Has anyone been able to do this?
  51. jamn4jc

    How close to amp in room?

    I understand FRFR, but am not ready for it, yet. I understand that a mic'd cab sounds different than an amp in a room. Etc... How close should I be to getting the "amp in a room" feel and sound with the following setup? - Using the Axe-FX II with FW18 Beta loaded - amp modeling ON -...
  52. jamn4jc

    NGD - PRS C22

    In the past, I was never a fan of PRS guitars. I guess I expected to sound like Santana, but always fell short. I played this thing last week and fell in love. It's a 2007 PRS Custom 22 that is just about as mint condition as they come. It's warm with a lot of sustain without being too hot...
  53. jamn4jc

    Lo-Res Delay?

    I am a big fan of the Lo-Res delay in the Line 6 M5/M9/M13 units and am having trouble duplicating that sound in the Axe-FX. There is a similar effect in the Strymon Timeline. I want the repeats to be less and less defined/crisp, but still on time. I have messed with the bit reduction...
  54. jamn4jc

    Where's my Senior discount?

    It took a while, but I finally achieved "Senior Member" status. That is a title/label that I do not take lightly. The amount of collective knowledge and sense of community here is inspiring and to be a part of that is a privilege. I hope to be able to contribute as much as I am able to take...
  55. jamn4jc

    Cello Tone - Just Chello'n

    I dialed up a cello tone for a song I'm doing on Christmas Eve. I have linked to a preview on YouTube and the preset has been posted to Axe-Change. The preset has an amp block, but does not have a cab block. I connect the Axe-FX II Output 2 to a Matrix GT800FX amp and NL12 speaker...
  56. jamn4jc

    Song Mode - display song number?

    After using Preset mode for the past year, I think I want to try Song mode. My understanding is that a "song" is a collection of one or more presets and as you bank/scroll through songs, the MFC will still display the preset number and name, albeit with an "S" prefix. Is there anything in the...
  57. jamn4jc

    Output Routing and FX Loop

    I just started using the FX Loop to route OUT2 (w/o cab block) to a Matrix amp and NL12 cab. OUT1 includes a cab and feeds FOH and and my IEM. Now, I am considering the purchase of an effects pedal (BigSky) that I would want to put in the Axe's effects loop. That's not going to work, is it...
  58. jamn4jc

    Spent so much time and money...

    ... and the best improvement by far in my tone with the Axe FX II was to change strings -- from 10s to 11s on my American Deluxe Telecaster. I am really trying to understand how a small change in string gauge can make that much of a difference? It's like night and day. I have really struggled...
  59. jamn4jc

    Matrix NL12 - as good as a 2x12??

    Are the Matrix NL12s really as good as a 2x12 cabinet? I had a huge breakthrough today when a friend let me borrow his 2x12 Orange cabinet. I easily achieved and heard lucious tones that I have been chasing for 12+ months. I have diligently followed many posts here regarding cabs, IRs (I have...
  60. jamn4jc

    Axe > Matrix 8 ohm > 16 ohm cabinet (n00b question)

    This is a new setup for me -- bought a GT800FX Matrix amp (8 ohms) and want to use that with a 16 ohm cabinet (Hughes & Kettner Tubemeister 112). Is this going to be OK? Any loss/change in sound? Any chance of damaging the amp and/or cabinet? I have done a bit of research on the interwebs...
  61. jamn4jc

    If you're not FRFR...

    I want to tie up some loose ends around my understanding of FRFR and what other options are our there. I also want to understand how the Matrix Amps (e.g. GT800FX) are being used and whether or not these are part of an FRFR solution or are they more amp+cab? I use an FRFR system (Axe FX II in...
  62. jamn4jc

    First Amp Head and Cab -- what type of cable

    I have always owned combo amps. I just bought a Hughes and Kettner Tubemeister 18 head and cabinet as a backup to my Axe FX II. Much to my surprise, they did not include a cable to connect the two. So, what type of cable do I need. I did a bit of research and the only thing I found is a...
  63. jamn4jc

    No X/Y on Filter Block?

    I thought I had used X/Y on the Filter block before (back in the Front Panel days). I used Axe Edit today for the first time and noticed almost immediately that there is not an X/Y state on the block. Is that correct? I checked the Wiki and the Axe user manual but didn't see anything specific...
  64. jamn4jc

    Major Ding in Telecaster

    I posted a picture of my Telecaster a while back. I cannot edit the original message. I think the Before and After pictures need to be seen side by side to appreciate what an amazing job Doug Frye (https://dmara.com/) did with this. It set me back $60. I can't even tell there was damage...
  65. jamn4jc

    Atomic CLR - Gain Structure Setup

    When the Atomic CLRs were first released in Dec/Jan, there was a lot of discussion around the need to go through the "gain structure setup". http://www.atomicamps.com/images/ATOMIC-MANUAL-1.3.pdf Now that the third wave of CLRs are flowing again, it's probably a topic worth mentioning...
  66. jamn4jc

    A little late to the 11.xx party...

    ... blown away and grinning ear to ear. Work and life have had the upper hand lately and have kept me from enjoying 11.x (made it to 10.12 when it first came out). For the first time in several years, I took a several weeks off from playing (home and church) and have had to sit on the...
  67. jamn4jc

    Any compatibility issues with files shared between Mac and PC?

    I am running Axe-Edit and Fractal-Bot on a Windows 7 PC connected to my Axe FX II. I recently started working on an iMac and may occasionally download updates there and sync them (via Dropbox) to my "Axe-Connected PC". Are there any issues with binaries (e.g. .sysx files, firmware, presets...
  68. jamn4jc

    Major ding in new Telecaster

    I managed to dump my new Brandy Wine Telecaster (American Deluxe) out of its case and put a major chip in the paint. Our local Sam Ash has an excellent luthier, but I am not sure he can fix something like this. Someone else looked at it and said that because of the type of paint and/or finish...
  69. jamn4jc

    MFC not able to calibrate XP1/XP2

    I am having issues calibrating my Mission Engineering SP1 expression pedal with my MFC-101. I cannot get the MFC's ENTER light to come on while in Edit mode. I get to the proper menu location (Edit > MIDI > Page Left (to XP1 Min/Max) > Parameter Over > .... nothing. At this point, I am...
  70. jamn4jc

    Lemur - on the fence

    I am really on the fence about getting Lemur and Axe template. What is the learning curve? Is it fairly intuitive? I am an IT guy, so am comfortable with UI. I have gotten pretty good with the front panel and am patiently waiting for AE 3.0. Does Lemur lose its value/appeal once AE 3.0 is...
  71. jamn4jc

    What is CH Select on Bogner Shiva (rear panel)

    Not directly related to the Axe, but I appreciate the amount of help and knowledge that is shared here. I have a Bogner Shiva 112RV (EL34 tubes) and have never been able to figure out what the "CH SELECT" on the rear panel is used for. There are four values (1, 2, +1, +2). I have done a...
  72. jamn4jc

    Every day feels like NAD

    I'm fairly new to the FAS world, and so far have gotten a ton of enjoyment by sticking to just a few "go to" amps. I'm preparing a song for this weekend and found a video of the original artist playing through a Fender Princeton Reverb. So, in the space of 1 minute, I go from "man, I wish I...
  73. jamn4jc

    Atomic CLR Update via Facebook

    Just posted... CLR production for North America is complete and in transit to Atomic’s CT warehouse with a mid-month delivery date. We were delayed for about 8 days waiting for the correct packing material (of all things) but that is well behind us now. Once we’ve restocked we’ll start...
  74. jamn4jc

    Axe FXII - problem with sound at startup

    I had an issue several times today after starting up my Axe -- I would get sound, but it was very thin. It had most of the volume, but was lacking any substance. Most of the time, if I changed preset then came back to problem preset, everything sounded OK. A couple of times, I had to restart...
  75. jamn4jc

    Finally... brings a tear to my eye.

    I have been fighting with my Axe FX II since the end of December. Version 9, then version 10 and I got off to a rough start. I have spent hours on the front panel and in the forums trying to figure out how to join the the many players here that are creating and discussing killer music and...
  76. jamn4jc

    HELP... feeling left out w/same fizzy gain

    Ugghhhh... I am about at my wit's end. I have spent a lot of time on 9.02 trying to get a gain sound that wasn't harsh and fizzy. I *really* thought v10 was going to solve the problem, but it hasn't. It's frustrating to see the forum in a state of euphoria when I am about ready to throw in the...
  77. jamn4jc

    So much for Plan B

    If this whole v10 thing doesn't go as planned, it just got a little more complicated. :| Line 6 Special Announcement About Line6.com User Forums The Line 6 user forums were taken offline on March 31, 2013. In order to improve our customers' experience, we are currently porting over the...
  78. jamn4jc

    CLR Active Wedge - how much sound/volume from the back?

    Compared to the sound level coming out of the front... how much sound comes out of the "back" of a CLR Active Wedge? Is there a significant difference in the volume level? For my purposes, the quieter the better. I expect some of the low frequencies to still bleed through, but would expect...
  79. jamn4jc

    A good sign? Wiki amp block list has suggested cabs for v10.

    I spent a good deal of time on the wiki yesterday looking at amp blocks and suggested cabinets. Everything referenced v9 firmware. Today, this appears at the top of the Amp (block): list... "The suggested cabs below are current for firmware 10.". The references to v9 have been removed...
  80. jamn4jc

    DOH! Scenes... how many times?

    I love scenes. No, I LOVE scenes. Just still getting the hang of them. Am I the only one that does this...? I get scene 1 sounding great then move to scene 2 and after messing around a while I make some big change to the gain, level or some other setting on a block and forget that the changes...
  81. jamn4jc

    Atomic CLR - expectation/experience

    Just curious... for those that have landed a CLR amplifier: what was the immediate out of box experience? Once you got the gain staging set on the amp, were you able to use stock Axe FX II presets and get great tone, or did you have to do any tweaking to dialin the tones? I saw a post where...
  82. jamn4jc

    Cable for Atomic CLR (or equivalent) to Axe FX II - Neutrik Speakon?

    Sorry in advance if this is a dumb question. Most of my playing time has been with stompboxes and amplifiers only in small places (my amp was the PA). Just recently, I have started playing in situations where PA systems are used and recently took the plunge in to Axe ownership (best Christmas...
  83. jamn4jc

    Tuner on MFC does not match tuner on AXE FX II?

    I was tuning up today and noticed that when the AXE2 said I was in tune, but the indicator on the MCF 101 showed that the string was a bit flat. Anyone else seen where the two indicators are not showing the same thing?
  84. jamn4jc

    MFC Filter IA LED not changing with EXT2 switch on Mission SP1

    I am having trouble getting the LED for an IA switch on my MFC 101 to show the status of a Filter block that I am bypassing via the switch on an Mission Engineering SP1 expression pedal. I have configured IA switch 10 on my MFC 101 to control the Filter block. I have the Filter block in a...
Back
Top Bottom