Search results for query: *

  1. saturate68

    Best Allan Holdsworth Patches Ever!

    Thank you VERY much......love the AH Chorus! Those band delays are really sweet!
  2. saturate68

    Heavy Devy on EMG tv, Axe-fx II content

    He is a great artist....outstanding personality and exceptional performer Will never forget that album and tour with Steve Vai for the "Sex and Religion" album What a shock that was! and he just went on with his career....
  3. saturate68

    Fractal-Bot New Version 1.2.7

    Thank you! Great tool!
  4. saturate68

    Axe-Fx II and Linux (again)

    Great news indeed....Thank you....
  5. saturate68

    It's Christmas Time...!!!!!

    Thank you very much, replaced almost all of the stock presets with your version, Christmas indeed! and kept some more!
  6. saturate68

    MOAEE - Classic delays

    So good to have the blocks back! Thank you Simeon and Fractal !
  7. saturate68

    Wizardry Drive Preset Creation (with soundclip)

    goes straight to my block library!! thank you for sharing! ....
  8. saturate68

    Axe-Edit 3.0.2 Released!

    Thank you very much, c'est magnifique!
  9. saturate68

    How to power Lexicon R1 with 7-pin midi?

    the power supply for the R1 is 9V AC so polarity does not matter. the hosa is probably DC?
  10. saturate68

    Yamaha FC7 For Expression Pedal

    See here : http://forum.fractalaudio.com/axe-fx-ii-discussion/71864-yamaha-fc7-pedal-issues.html I had one that worked plugged on my axe directly but the two I use on my GCP had to modified...... its a great expression pedal......its quite easy to swap tip and sleeve if you need to.....I did...
  11. saturate68

    Roctron MIDI Mate or Lexicon MPX R1?

    I have a R1 too and like it very much, its compact and does most of what is needed....if you have one you should try to use it.....
  12. saturate68

    Classic Acoustic Nylon Guitar with AXE ;)

    you seem to be completely in it.....a great piece of music well done......
  13. saturate68

    Midi Pinout Phantom Power

    The MFC and the GCP both use AC power so there is probably no positive or negative pole as such. pin7 goes to the center pin of the power plug pin6 goes to the exterior of the power plug
  14. saturate68

    Which is better for Axe... GCP or All Access?

    Hi, I have a GCP and it does most of what you need to control the Axe....As i have a GCX its the obvious controller choice for me The All Access is more expensive and does more for sure, it can send sysex messages that GCP can't...... the Rocktron is more expensive but does more..... can't tell...
  15. saturate68

    How's about an Axe Edit 3 update?

    Those Swiss people like their clocks! :o even in the bathroom?
  16. saturate68

    How to bring in a Whammy without Auto Engage

    works really nice indeed, lots of fun with that! thank you ! love to save such blocks!
  17. saturate68

    GCP issues with axe fx 2

    just go to the IA number you want to change and change the device by using the lower 3 and 4 buttons its goes GCX1 to 4 then SEQ then CH1 to CH16 then scroll right with the cursor button and put in the CTL you want to activate
  18. saturate68

    GCP issues with axe fx 2

    Happy to be able to help...... you can reconfigure any device on the GCP not sure what you want to know about (3- to CH-CTL??????? :)
  19. saturate68

    Restless and Wild

    Accept was VERY cool in the 80's! Will never forget Monsters of Rock Karlsruhe 1984...Motley Crüe, Accept, Gary Moore, Ozzy Osbourne, Dio, Van Halen and ACDC and believe it or not, the german crowd went crazy for the home team! but they loved Ozzy too!
  20. saturate68

    Scott Szeryk - "Celtic Rainbow" - Live at the Aeolian - GoPro Cam - Video/Patch

    I like it a lot! any chance to see you and your band on the other side on the Atlantic soon?
  21. saturate68

    GCP issues with axe fx 2

    Hi axle the only thing that could be added to Sixtring's reply in that thread would be to check the device/channel setting and make sure your midi out on the GCP goes to midi in on the Axe. check your midi channel on the Axe in I/O - midi tab : midi channel , usually its on channel 1 then on...
  22. saturate68

    Yup! Another GCP Scene Selection Questions

    one more thing learned today!! good team work! :)
  23. saturate68

    Ground Control Pro - setting tap tempo. Is this Possible?

    yes as Zex says its completely possible in 4 preset per bank mode you can use button 1 to 8 as Instant access you can configure any of the eight buttons to send CC's to the Axe tap tempo is CC 14 so you need to send that CC twice in momentary option on channel 1 check out the manual of the GCP...
  24. saturate68

    Yup! Another GCP Scene Selection Questions

    Hi Satch4u3 gave it a try and here it works fine, I'm in 4 preset per bank mode......did it from PC 40 to 43 wich is A1 to A4 in that bank mode mapped it to 37 scene 1 to 4 and it works fine...... sounds like you are in 10 presets per bank?
  25. saturate68

    How to sync Axe tempo with DAW tempo

    Hi Poparad.....midi clock sure works with the Axe, it just doesn't transmit midi clock out but when you send midi clock to the Axe midi out it syncs. once again in reaper (you must be sick of it by now) in midi preferences when i enable the midi output to the axe all i have to do is enable "send...
  26. saturate68

    Me And My Gang - Axe-FX II/OwnHammer

    feel good music....enough of all those sad dark things......fun to listen to and surely fun to play too! well done!
  27. saturate68

    How to sync Axe tempo with DAW tempo

    Hi again.....I don't know how to do it in Pro tools but I did it a few times in sonar and reaper. you set your beat rythm in your project, insert a midi track in your project, usually double click that track (might be different on pro tools) to get to the midi roll window, on the beat 2.1.00...
  28. saturate68

    Brian May

    Brian May is a Hero indeed......I recently saw one of Queen's concerts in the Hammersmith Odeon in 1977 on the BBC and THE sound was already there! and it seems you got it to the AXE now! Wonderful!
  29. saturate68

    How to sync Axe tempo with DAW tempo

    you could send two CC messages synced with your tempo from pro tools to the axe
  30. saturate68

    Des Français ici ?

    Salut a tous, toujours en transit entre Boston et Chateau Thierry je passe le bonjour aux Francophones du forum. Dommage je vais rater la venue de Fremen aux USA. Retour en France en Aout......
  31. saturate68

    Yamaha FC7 Pedal issues?

    It works fine here directly on the axe (that is how I used it before on travel) you can swap the wiring in the pedal if you have to , just undo the body, remove the pivot big screw, the body opens and you swap the red and white wire on the pot.....
  32. saturate68

    Yamaha FC7 Pedal issues?

    yes they sure work...... did you calibrate the pedal with the axe? in I/O -pedal tab and pedal cal (enter) the GCP is the ground control pro foot controller from Voodoo lab
  33. saturate68

    Yamaha FC7 Pedal issues?

    Hi I use several of those pedals and love them..... there is a spring setting that may keep you from going all the way down but you would probably feel it.... also they have 2 positions, for sitting and standing....check how your cable goes out from the pedal body mine always worked right with...
  34. saturate68

    Something is causing my GCP power supplies to stop working

    sounds like you plug your power supply in the axe and feed the gcp with the 7 pin cable? did you try power on the gcp and a 5 pin cable? that would eliminate the Axe part...... the original power supply output is 9v AC 500mA
  35. saturate68

    Issue With Patch - Need Advice Please

    I use Axe adit all the time and it has been quite good to me for now. and since Fractal bot can now save the edit buffer directly to your computer its easy to keep track of changes and recall presets to see if they work as they should
  36. saturate68

    Automated program changes using midi interface in cubase.

    see in this thread : http://forum.fractalaudio.com/other-midi-controllers/71441-automating-axe-fx-pre-set-changes-garageband.html Stratamania has a page about program changes with Cubase : Stratamania's Music Blog | Smile! You
  37. saturate68

    Issue With Patch - Need Advice Please

    Hi warrior ! indeed no output with your patch, went to the amp block chose another type of amp and output came alive came back to the triptik and then it works, saved the preset and now it runs fine here
  38. saturate68

    Ground Control Pro select all scenes on axe 2

    ok Ashes, check your axe midi channel , it should be on 1 in I/O - Midi : midi channel plug a midi cable from your GCP midi out to your Axe midi in ( I suppose your GCP is on and running) the four lower led lights are scrolling on the GCP and on top the display does too.....1,2,3;4 go to...
  39. saturate68

    Ground Control Pro select all scenes on axe 2

    Hi Ashes! what is it exactly you need help with?
  40. saturate68

    Is it possible to use this with the Axe-FX 2

    as it does midi over usb you probably can hook it up and with midi-ox (if you use a pc) create a link beetween the pedal-midi out and the axe midi in..... you have to check if you can see the midi connection to the pedal on your computer
  41. saturate68

    Ground Control Pro select all scenes on axe 2

    Hi.....gave it a try and it works indeed..... problems is you cannot select scene 2 this way and as its part of the GCP preset you can only have one VCA value per preset (or use the expression pedal but then its too hard to get the right value) but its good to know there is a way to send a CC...
  42. saturate68

    GCP Scene change help

    Hi Zex! saw that post yes.....did not experiment with it yet...... for me scene selecting by GCP preset (program change) sounds the easiest but I will try that solution too...... Thank you
  43. saturate68

    GCP Scene change help

    on the GCP you program your PC change number, say you program preset 1 to PC 1 then on the axe FX you go to I/O - Midi you set mapping mode to custom then map from preset : 1 map to preset : any preset you want on the Axe say 14 map to scene : any scene you want say 2 now when you send PC1 with...
  44. saturate68

    In Studio, REALLY want AXE FX II to clock from Converter/Interface or Word Clock

    you will have to use Format: S/PDIF – 24 bit Sample Rate: 48 kHz fixed with RCA Coaxial Type for S/PDIF I/O or XLR for AES I/O those are the two only modes available, you can't use that?
  45. saturate68

    Clouds by Zach Sobiech (RIP)

    helps us look at daily problems and find a way around use the time we have no limits set for most of us.....
  46. saturate68

    trip-tik and brit+

    not perfect? this sounds very good indeed! what IR's did you use?
  47. saturate68

    Need help with a couple of probs...

    some people experienced problems with USB 3.0 ports......
  48. saturate68

    Need help with a couple of probs...

    Hi ! did you try to use a different USB cable, check if its plugged right.....
  49. saturate68

    S/PDIF cable for Axe II?

    Hi....yes its the RCA coaxial type you will need...... Connectors: RCA Coaxial Type for S/PDIF I/O, XLR for AES I/O Format: S/PDIF – 24 bit Sample Rate: 48 kHz fixed
  50. saturate68

    Clarification re: MIDI Clock - Axe USB or MIDI in passing Clock to Axe MIDI Thru Port

    or if your device takes tap tempo just send the right CC message through the midi thru port of the Axe.....that still works
  51. saturate68

    Clarification re: MIDI Clock - Axe USB or MIDI in passing Clock to Axe MIDI Thru Port

    Hi, what are you trying to do? I suppose you're trying to sending midi clock from your computer to other devices using the Axe FX thru?
  52. saturate68

    Weird issue

    sounds like your GCP sent a bank change message (CC#0 value: 2).....so you're on bank C now the manual says : Bank select commands persist until another valid bank select is received or the unit is rebooted. Remember that DISPLAY OFFSET (p. 137) can add one (1) to all of the preset numbers...
  53. saturate68

    Pretty good wah setting. Try it out!

    Thank you, works great.....saved in the effects folder of the Axe edit workspace and is available after axe edit restart as Bill's wah !
  54. saturate68

    OT - Axon AX-50 Anyone use it or know anything about it?

    Yes I bought the AXON AX 50 USB a few years ago because of the editor and the smaller box size.....it still works with windows. I use it in the same way you do, mostly for keyboards layering Just checked the terratec producer web site and its down for the Axon part......so nothing to hope there!
  55. saturate68

    Saving banks to computer

    when you save a whole bank on your computer you can access any preset of that bank on your computer with Axe Manage and edit individually, send it back to the Axe. And you can save your preset as you wish
  56. saturate68

    Acoustic Patch

    Nice patch indeed, loaded with midi-ox and overwrites in position 213 on my Axe.....Thank you......
  57. saturate68

    Sharing Presets (how to without Axe-Edit)

    Hey Deleted! you're welcome .....happy to help!
  58. saturate68

    updated to FW10, i think something went wrong :(

    some people seem to stay on the old modeling version : check in "Global" that your modeling version is 10.xx
  59. saturate68

    Backing up with MIDI-OX

    try this : http://forum.fractalaudio.com/axe-fx-ii-discussion/66853-how-do-i-save-my-v9-presets-before-i-start-doing-v1-stuff.html
  60. saturate68

    Short Jamming (fw10)

    Very nice, great sound and touch.....Thank you!! need more of that!
  61. saturate68

    Just wondering....is the Axe Fx II used in any major studios?

    I was not 100% convinced of firmware 9 and could see why pros would just use the effects section. but today that has changed.....this is indeed a game changer. Great work from Fractal
  62. saturate68

    is there a complete list on the forum of the new presets for 10?

    Elegant Gypsy : preset 86 ! all new and wonderful
  63. saturate68

    MIDI developer's spec for the Axe-Fx II

    That will be very useful.....Great work and thank you to all the Fractal team....
  64. saturate68

    how do i save my V9 presets before i start doing V1 stuff?

    you can do it with the old Axe manage if you have installed Axe Edit V1 or just use midi ox or snoize depending on your system see here : http://forum.fractalaudio.com/axe-fx-ii-preset-exchange/65876-sharing-presets-how-without-axe-edit.html but on the Axe choose "dump bank x to midi" I...
  65. saturate68

    Looking for a rack bag in the EU? Your search could be over...

    sounds interesting.....what is the shell made of? is it wood or metal? or is it just fabric? how heavy is it? (sorry for all the questions but I was thinking of buying a travel case)
  66. saturate68

    SuperiorDrums, how?

    For song writing and exploration I use Groove Monkee midi files.....good quality midi files Groove Monkee - Midi Drum Loops, Midi Drum Patterns, Drum Loops, Drum Beats, free midi loops lets me figure out tempo and style before I go see my drummer..... of course he will have a different idea...
  67. saturate68

    A little Zep

    makes me want to go get my Les Paul from under the bed! Great sound.....Thank you!
  68. saturate68

    Doing something wrong, but what??

    or maybe parallel blocks with wrong bypass mode? we would have to see your preset..... its not ignorance, its a lot to learn but its worth it......
  69. saturate68

    USB monitoring through output 2 connected speakers, possible?

    Hi Chris, indeed by routing the usb input to output 2 you have to bypass all your chain blocks to get the sound out....global bypass would not work but I supposed symphx (I misunderstood, excuse my French) just wants to monitor his recordings on output2.....
  70. saturate68

    USB monitoring through output 2 connected speakers, possible?

    Hi.....the USB/DIGI Out Source lets you choose what you send to the digital output (USB out 0/1 and AES Out or S/PDIF Out), options are input, output1 or output2....this is the signal you can feed to the digital outs. you should be able to use output2 for monitoring by selecting USB as main...
  71. saturate68

    Using a U.S. Axe FX II in Europe

    This is the cable you will need, no switching needed: Amazon.com: SF Cable, 6ft European Power Cord (IEC320 C13 to CEE7 VII): Computers & Accessories that cable will fit both standart european plugs : Electrical Plug/Outlet and Voltage Information for Finland : Adaptelec.com, International...
  72. saturate68

    Using Axe 2 as soundcard with Reaper?

    just try to go as low as possible.....I use 256 samples and it works.... if your system is faster you might be able to go even lower.....when it starts to clip and distort just go up one step stay on "safe" for the streaming mode and adjust the buffer size
  73. saturate68

    Sharing Presets (how to without Axe-Edit)

    you probably use midiOx to upload your presets to the axe? its almost the same backwards.... launch midiox menu : view -> sysex in the Sysex view and scratchpad window menu : sysex -> receive manual dump (you need to highlight Axe Fx II midi out in midi devices) on the AXE go to utility...
  74. saturate68

    Using Axe 2 as soundcard with Reaper?

    Hi Roadrunner: look here : http://forum.fractalaudio.com/axe-fx-ii-discussion/63688-new-axe-fx-ii-need-help-recording.html
  75. saturate68

    New Cooling Fan in Axe II

    Et voila! Thank you Joe1871....went to the chinese computer parts street in Paris today and grabbed one of those noiseblockers for 15 euros...was a bit worried about how to mount the new 25mm thick fan but the nice silicon rubber pads just slide on the mounting posts.....Wonderful and so quiet! :)
  76. saturate68

    New Cooling Fan in Axe II

    That fan doesn't really cool the board....its mounted close to the top metal plate and just circulates air in the box......its not like on a computer where "fresh" air is sucked in the tower. My Axe bought in December 2012 is quite noisy, enough to hear the difference when its on.....I will...
  77. saturate68

    Noise and clicking sound from axe 2

    This copper tape is good quality and sticks great....its also thin enough to fit in corners..... STEWMAC.COM : Conductive Copper Tape
  78. saturate68

    Getting rid of ground loop buzz with Axe fx and Elec. Guitar. Good way of fixing it?

    is it the same when you don't touch the strings? did you try the ground lift switch on the back of the Axe?
  79. saturate68

    Patches/Tones wanted - Andy James / Andy Timmons plus a help question \m/

    There are a few Andy Timmons presets floating around.....I like Fremen's one in his preset collection : http://forum.fractalaudio.com/axe-fx-ii-preset-exchange/63175-fremen-v-9-02-presets-available.html depending how your Axe is connected to your computer (midi or usb), just go to...
  80. saturate68

    2013 Grammys in 10 words or less

    Nuno Bettencourt did a nice job with Rihanna.....otherwise it was quite bleak !
  81. saturate68

    MXR Dynacomp Compressor Settings?

    and how do you load one of those saved blocks in a preset?
  82. saturate68

    Question about assigning and External controller to the Output 1 volume

    all you need is send midi CC11 with your expression pedal for output 1 and CC12 for output 2...... or simply go to I/O CTRL menu and change OUT1 volume to "Pedal" to use the Axe pedal input
  83. saturate68

    Bypassing an effect block controlled by a sequencer

    sending CC97 value O/127 doesn't bypass WAH1? and CC98 for WAH2?
  84. saturate68

    video: "Demolition In C" (using 6160 preset)

    Its great to be in this forum for the technical advice but its even better to open your ears to other musicians......Thank you!
  85. saturate68

    Clark Kent's Perfect IR!!

    Thank you very much indeed....I like the first one better as it had less mediums and it fits better with my main guitar. a very nice recipe! C'est formidable! with SoloAweek's SRV voodoo preset its pure Magic! fantastic!
  86. saturate68

    Stereo effects on the Axe FX II??

    the only blocks that sums inputs to mono are AMP, CAB, Drive, and the pedal compressor. you can put a stereo effect and then feed two parrallel branches of mono amp with input switched to left and right and each have its cab panned left and right too (don't forget to do that on the cab too to...
  87. saturate68

    New To Axe FX II, Need Help With Recording

    yes that is how it should be.....1/2 is effected and 3/4 is dry signal over USB on reaper.....might be 0/1 and 2/3 as the manual states....
  88. saturate68

    Discussion en français !

    Bonjour a tous ! comptez un Francais de plus! je suis pour l'ouverture du bistrot même le Dimanche! Pour enregister le son clean il suffit de placer la boucle d'effet en début de chaine et de récuperer la sortie send pour l'enregistrer. S
  89. saturate68

    New To Axe FX II, Need Help With Recording

    yes the Axe Fx Asio is over USB, that is why you need to install the USB driver on your computer..... Asio is great for recording as its a low latency driver but you can also use the Axe Fx to playback Audio streams over the USB and play along if your input on the Axe is set to analog.
  90. saturate68

    scintillating patch trouble syncing. when does the pattern start?

    its mostly the multidelay who creates the pattern, its time based (1/2 tempo) and had a fixed decay time....to get it more in sync you will have to adjust the decay time but basicly it just starts when you hit the strings
  91. saturate68

    New To Axe FX II, Need Help With Recording

    Hi welcome to the forum and to the Axe world! its quite simple, you just need to use the ASIO Axe Fx driver in reaper, configure it to use last input : 4 IN 4, this way you can add two stereo audio tracks with 1-2 being the preset sound from the Axe and 3-4 being the dry guitar sound for...
  92. saturate68

    FXL problem

    as it is now all you need to play MP3's is to have the Axe input on analog and then with the USB plugged to the Axe you can select the Axe Fx USB in to play directly any audio stream from your computer, it will merge with the Axe output 1
  93. saturate68

    Acoustic Guitar Preset

    try this one.....its in Fremen's banks, it uses a tone match and sounds great! :)
  94. saturate68

    MIDI CLOCK OUT yes or no?

    OK did it and when you send midi clock over USB the Axe syncs to the computer (I use a PC and Sonar but I did it with MidiOX) but there is no midi activity. The midi IN led does not come on on the Axe front panel I did this with USB adapter on and off and midi thru on and off seems there is no...
  95. saturate68

    MIDI CLOCK OUT yes or no?

    OK did the test plugged my microkontrol sending midi clock on the Axe midi in plug ; the Axe syncs to the microKontrol added my firewire midi in to the Axe Midi thru : with I/O thru off no clock, with midi thru on clock gets to the firewire midi in The manual is right : on its own the axe Fx...
  96. saturate68

    MIDI CLOCK OUT yes or no?

    oh ok no there is no midi clock thru.....unfortunately at the tempo chapter of the manual it says Axe does not transmit midi clock....
  97. saturate68

    MIDI CLOCK OUT yes or no?

    Check this : MIDI THRU is disabled by default. Turn it ON in the I/O menu under MIDI.
  98. saturate68

    Recording with USB in sonar X1

    do you use the ASIO mode driver in "Audio options-Advanced"? when you switch to it it will reconfigure Sonar in 48khz and 32 bits which is the setting for the Axe Fx driver
  99. saturate68

    Advice for solid state power amp wattage for my cab.

    I agree that for the amp the load is 400 watts, no problem to me the problem is each speaker max power handling Speaker Impedance, Power Handling and Wiring | Amplified Parts
  100. saturate68

    Advice for solid state power amp wattage for my cab.

    There is also the wiring issue of the cab : those speakers are 100 watts and 8 ohms each.....so the global power would be 400 watts but if it is a 8 ohm cab they are probably wired in two parrallel series of 2 speakers wich means that max power is 200 watts or you will burn your speakers the...
Back
Top Bottom