Search results for query: *

  1. akmojo67

    Axe-Fx III Firmware 23.05 Release

    I will say this. I have been with Fractal since the Ultra days. This current firmware is one of the most inspiring updates I have seen since the beginning. I find myself playing every chance I get since this one has dropped. I am sure there are things that can still be improved and I am sure...
  2. akmojo67

    Amp speaker tab - FRFR vs SS PWR AMP

    It could be. Just switching over to SS PWR AMP with my regular settings sounds more open to my ears.... but I have been hard on them over the years!
  3. akmojo67

    Amp speaker tab - FRFR vs SS PWR AMP

    Thank you for the clarification. I am a few drinks in but it just seems to have some extra mojo tonight....may be a different story in the morning. Thanks again for taking the time to answer...you're the best!
  4. akmojo67

    Amp speaker tab - FRFR vs SS PWR AMP

    Thank you sir! I think I will!
  5. akmojo67

    Amp speaker tab - FRFR vs SS PWR AMP

    I generally play direct through a PA style setup, so I have always left the tab at FRFR default settings. I tried the SS Power amp setting just to see what the difference is and I think I like the way it sounds better! What is the difference in eq and is there any downside using this setting...
  6. akmojo67

    Axe-Fx III Firmware 23.00 Release

    Thank you Chris! ....that was exactly the problem.
  7. akmojo67

    Axe-Fx III Firmware 23.00 Release

    Has anyone else experienced output 3 sending out just a direct guitar signal, even when bypassed?
  8. akmojo67

    AFIII Lera Lynn - "My least favorite life" (Strat into Deluxe Reverb with corresponding DynaCab)

    That was fantastic! Well played
  9. akmojo67

    Axe-Fx Firmware Version 21.00 Release Candidate 2 (Beta 8)

    Thanks ...I will dig deeper and see if it is just on my end
  10. akmojo67

    Axe-Fx Firmware Version 21.00 Release Candidate 2 (Beta 8)

    Has the random popping issue been addressed yet? I am experiencing it on a few of my presets. The Freedmans seem to be affected along with the other mentioned amps. I have Beta 8
  11. akmojo67

    Amp block controls

    Thanks again! This community is the best
  12. akmojo67

    Amp block controls

    Thanks for the tip. Is that saying that I can only use the expression pedal for either 1 channel or all? Where do I choose that option? I have not noticed it when programming the functions
  13. akmojo67

    Amp block controls

    Thanks, I will check into that Yes, when I set up control functions in an amp channel, it automatically sets up the same settings in all the channels. I am trying to get the functions to work only in the channel I am setting the functions on.
  14. akmojo67

    Amp block controls

    I am not sure if this has been discussed before. I have been trying to utilize a second pedal for various controls in the amp block, usually for boosting and lead settings. I have found that when I set up the controls in, say amp block B, the same settings will continue through all the other amp...
  15. akmojo67

    The CNFB Method

    So what is your imagined practical application for this??? In a language that even a guitar player can understand 🙂... please
  16. akmojo67

    Axe-Fx III Firmware Release Version 17.00 Public Beta 3

    So I tried out the new cabs and I am getting a repeat after striking a cord of what I can best describe as a scratch of a washboard sound. Is this a known issue?
  17. akmojo67

    Axe-Fx III Firmware Release Version 17.00 Public Beta

    Just out of curiosity, has anyone used the new cab feature yet? I have seen a lot of people up in arms about this but haven't seen a good example as to why. I thought the examples Cliff gave sounded cool but to see this amount of "what about me", I would like to see it in application....not...
  18. akmojo67

    Output 3 level

    Thanks for the feedback everyone
  19. akmojo67

    Output 3 level

    Yes, you are right. What I did was level output 3 by the meter to equal with output 1 in the last beta, which is about a 20dB difference. After the last release, the meter shows the levels aren't the same but after listening carefully, I think that the meters are off not the volume with this...
  20. akmojo67

    Output 3 level

    Might be a possible bug? Output 3 is considerably quieter now than prior to the official release. I use output 3 for power amp and cab. I had the levels even with output 1 prior to update but now across the board, in all pre-sets, it is considerably lower. Can someone confirm?
  21. akmojo67

    Hans Zimmer Like a Dog Chasing Cars GUITAR COVER

    Sounded great!
  22. akmojo67

    Is it me or is the Axe fx 3 aesthetically unpleasing?

    It seems the biggest issue is the blue Axe III logo. I say do like I do with annoying check engine lights. Just institute a quick 3M repair... and viola! Problem solved:D
  23. akmojo67

    AFIII Axe-Fx III Mesa MK IV (USA LEAD BRT) Demo

    Thanks for the feedback... exciting times!
  24. akmojo67

    AFIII Axe-Fx III Mesa MK IV (USA LEAD BRT) Demo

  25. akmojo67

    AFIII Axe-Fx III Mesa MK IV (USA LEAD BRT) Demo

    Cooper, could you tell me what separates this unit from the Axe II's?... as far as the sound and feel are concerned? The video sounded great, but almost all postings sound great anymore. It is impossible to distinguish any discernible differences from a video. Can you give a little insight into...
  26. akmojo67

    Need a more natural growl

    Sometimes it is best to use the X/Y of the drive block and dial in the OD pedal specifically for FRFR. If you have the OD dialed in to sound good in the real cab there is a good chance that it might sound a little wonky coming out of the wedge seeing as how they are different animals
  27. akmojo67

    My Journey To Fractal - By Devin Townsend - Part 1+2

    Great read! I am glad to hear you have found your canvas...look forward to hearing the results
  28. akmojo67

    Naturally tube soft "break up" from clean? No

    Try the Wrecker model...it does this very well
  29. akmojo67

    Cab Sims Sound Harsh

    It might be worth checking your speaker size in the cab block. I have had on occasion the size default to 0.25 instead of 1. In those cases I have found the sound to be thin and harsh
  30. akmojo67

    Axe-Fx II Quantum 8.02 presets

    Thanks Matt, I'm looking forward to trying them out.
  31. akmojo67

    At my wits end with this pedal

    Looks to me like you are trying to combined a Friggen with a Fractal...it can be done but you have to be a rocket scientist!
  32. akmojo67

    Looper help / looper seems to shorten the loop when replaying it.

    To be honest, I have never been able to get the time right myself. I tried it a few times when I first got my Axe 2 but gave up. I just assumed it was just me
  33. akmojo67

    Using the VU meter to balance volume among presets

    How do you get your signals all even in the VU meter? Whenever I use it the left and right signals are usually uneven and the outputs 1&2 are at different levels on the meter. I rarely see the even balance that both video's displayed
  34. akmojo67

    Axe-Fx II "Quantum" Rev 1.01 Firmware Release

    Did anybody notice the choice of preamp tubes? Nice option ....thanks again Fractal team
  35. akmojo67

    Quantum/MFC-101 Startup Bug

    Has this issue been reported yet? I have been having the same issue during start up. I have to change presets initially to make the foot switches operate on my mfc.
  36. akmojo67

    Axe-Fx II Firmware 20.00 Public Beta

    Hey Cliff... just out of curiosity, what is it about this last epiphany that has you so excited?
  37. akmojo67

    HiWatt G3 soon?

    The Fryette is another I would love to see G3'd
  38. akmojo67

    Axe-Fx II Firmware 18.10 Released

    I noticed with this firmware that I had to reduce the MV on a few of my patches regain some clarity. Amps like the Lonestar lead are noticeably fatter with the 18.10. A little MV goes a long way All in all I think it sounds great.
  39. akmojo67

    Is it still the plan to G3 the rest of the existing non G3"d amps?

    That's awesome! didn't realize there were so many left undone. Fractal team has their hands full
  40. akmojo67

    Is it still the plan to G3 the rest of the existing non G3"d amps?

    I really love the sound and feel of the current G3 amps. There are still a few of some favorites that haven't been done yet (which really still sound great regardless). I know that the team has been busy with IR capturing and new products, just wondering if that is still on the agenda or...
  41. akmojo67

    G3 FW18 mini review

    :D This dropped right after I made the post. Killer clip
  42. akmojo67

    G3 FW18 mini review

    That's just crazy talk.
  43. akmojo67

    G3 FW18 mini review

    So what happened to G3? The rhetoric got to a fevered pitch and just died off. Not even any new clips as of late. It's got to be close to public beta time at least.
  44. akmojo67

    creating that 'tinny' sound (like a busted fuzz/almost dead battery)

    Try turning off the speaker Sim
  45. akmojo67

    Check out my progressive metal track!

    That was great
  46. akmojo67

    Fremen presets - V 10.02

    Thanks... I downloaded winzip and it worked great. For some reason I've never ran into a situation where I needed winzip before Fremen your presets are amazing !
  47. akmojo67

    Fremen presets - V 10.02

    Haha I only made it to 086....the file didn't download as a zip file and when I tried to open it it didn't give me any options that worked
  48. akmojo67

    Fremen presets - V 10.02

    Does the file need to converted somehow? I have tried for two days and have'nt been able to open up the downloaded file. Can someone clue me in on where I am going wrong. It would be greatly appreciated.
  49. akmojo67

    Nothing like a real Plexi

    Damn ... I think Cliff needs a break. I always look forward to his posts. He usually posts a great clip or some tidbit of genius but that was kind of bizarre.
  50. akmojo67

    V.10 public beta?

    Haha ... lets face it, we are all players here and I think most of us would agree that it is much more fun being in the game than waiting on the sidelines.
  51. akmojo67

    V.10 public beta?

    Yeah, I certainly understand wanting it perfect before release but with so much involved with the process I think it is a virtual impossibility (no pun intended ) to catch everything. That is why I thought it brilliant to do the public beta last time. With more hands getting into places others...
  52. akmojo67

    V.10 public beta?

    Just curious if the Fractal team planned on putting out a public beta on V10. With V9 I personally thought it was great putting that out there. It certaintly helped with the finding of bugs and glitches with the program. I know there were a lot of people that had complaints about one thing or...
  53. akmojo67

    Bug? Lazy MFC-101?

    Did this issue ever get resolved ? My unit still will not function correctly until I switch patches after start up.
  54. akmojo67

    Bug? Lazy MFC-101?

    Haha...that is why I chimed in Funeral, looked like you were getting it from all sides . As far as the update , I used midi ox and a midi cable . I don't seem to have any problems after switch patches away and back ...just at initial start up
  55. akmojo67

    Bug? Lazy MFC-101?

    Hey Funeral you are not the only one I have had the same exact problem as you . I get the same inactivity from the IA's until I change patches then back after startup . This started happening after I upgraded the firmware
  56. akmojo67

    controlling multiple units ???

    thanks guys, how do I set up the MFC to send separate signals to chanel 1Axe and 2 for the GR 33. I have played with it a little but it seemed to me that I could pick one CC per switch.I think that I will need to send to separate CCs for each unit via different scenes
  57. akmojo67

    controlling multiple units ???

    Does anyone one here use the MFC 101 to control more than one unit at the same time ? I am thinking of integrating a Roland GR33 with the Axe 2 and wasn't sure on how to go about it. I have already hooked it up and have got it synced to change patch channels with corresponding patches on the...
Back
Top Bottom