Search results for query: *

  1. ajnord32

    Driver installation problem

    I switched to my old laptop... it all works fine. Dont know way... Anyway I can uppgrade the firmware
  2. ajnord32

    Driver installation problem

    using Fractal boot.... But It wount wor without the driver installed
  3. ajnord32

    Driver installation problem

    Thanks for helping. I`m not getting it..been trying different locations. My be admin rights /job PC problem. I wanted to install new firmware tonight.. that is my first issue..
  4. ajnord32

    Driver installation problem

    Have rebooted my PC and I`m trying to install the driver for AX Fx-II Get ...failure code 105.. Am running Windows 7 Professional Any tips/advices reg AJJ
  5. ajnord32

    Roland FC300 midi pedal

    Ive tried using it... later a GCP.... my hair started to become grey and was falling off in dots with fustration. I got me a a MFC .. I could begin playing again ... and the baldness is now shrinking. The AXe -Fx is a complex unit. The .MFC is almoust plug & play with it. so easy to set up for...
  6. ajnord32

    Need Recording help

    Will check when I hoock up again.
  7. ajnord32

    Need Recording help

    Hello. I`ve been trying to recorde using usb /soundcard in the Axe2 throug cubase-5. The sound is great... bbut; I have problems with getting drumloops to sync with the cubase clock. Is there a midiclock in the Axe that "overides" the cubase clock? How do I turn it of? Thanks in advance AJJ
  8. ajnord32

    FRFR speaker vs Guitar Cab ....advice

    Thank again you all for your inputs on this. I`m going to visit Kriig and try his FRFR system... and he can try my 2-12 VHT cab if he wants to. Will let you all know how it turned out. Will read all posts one mor time. Thanks again. Great Forum!!
  9. ajnord32

    FRFR speaker vs Guitar Cab ....advice

    Kult... eg har også ein bra ibanez RG2550E som den forrige eiger bytta ut pickups på. Den har Bare Knuckle Painkiller i neck og bridge, og Bare Knuckle Trilogy Suite i middle . Kjøpte de på impuls. En veldig god float trem. ,,,,, men etter å ha brukt EBMM gitarer .... love and afection for...
  10. ajnord32

    FRFR speaker vs Guitar Cab ....advice

    Thank you .I`will. My favorite guitar is on repair for changing a pot. I sholud have been redy yesterday, but gitarhuset have send me wrong type.. so am waiting for them to send me a new.
  11. ajnord32

    FRFR speaker vs Guitar Cab ....advice

    Thanks a lot guys for all your great inputs on this topic. Peace AJJ
  12. ajnord32

    FRFR speaker vs Guitar Cab ....advice

    Hello Axe-mates Have been using the Axe-II since FW-8.... and it`s all been a thrill. Love FW12 must say. I`m using a Matrix-1000 poweramp through a 2-12 VHT delivarance speaker cab. (I sold my VHT 2/50/2 poweramp) Besides the expence, I have stuck to my guitar cab cause the Axe amp block...
  13. ajnord32

    An old classic

    I deleted this post cause its a FX-II patch. I refered to money for nothing. Ive posted it in preset exchange... some weeks ago. Guess its still here.
  14. ajnord32

    AE3 help

    Hello. Is seems like the AE3 (v303) is sendig some some "disturbance" signal that flips menu pages in the AXE-FX-II. Any advice how to fix this? Thanks
  15. ajnord32

    My Nice Rackcase from Stage Craft Cabinets arrived

    Yes It came out very good. If I get a hand of a good cam I`ll post pictures of the lids to. The pricing for this is as a medium priced rack. I did`nt really need it..I had a rack-case, but yhe AXE-II deserves a nice home :)
  16. ajnord32

    My Nice Rackcase from Stage Craft Cabinets arrived

    Would like to have an IR`r myself of this VHT/Fryette 2-12 cab. Have unfortunately no experiance in doing IR`s
  17. ajnord32

    My Nice Rackcase from Stage Craft Cabinets arrived

    The guys from Stage Craft Cabinets made me this sweet looking 4u rack for my Axe FX and Matrix. I`ll put som straphandles on. Have orderd the from Stage Craft. Its pictures taken with my cheep cellphone. Got nice lids with butterflies for it.
  18. ajnord32

    Money For nothing

    Here is the patches. Guitar I used is a EBMM SMY2d /Bridge humb. Direct patch Axe-Change - Download Preset - Money for Not DIRECT AJJ - by arvo For matrix & cab Axe-Change - Download Preset - Money for N Through cab AJJ - by arvo I put on a short delay in this one (guess its the 2`nd of Marks...
  19. ajnord32

    Money For nothing

    I`ll put it on in a moment
  20. ajnord32

    Money For nothing

    Thank you. I use a waw (VX845) and 2 reverbs in paralell. The amp is BRIT PRE. Ive read that Mark used a Laney, but as far as I know there isn`t any Laney amps in the Axe Fx. In the recording-patch the bass is set low. Through my Matrix & VHT-2-12 cab, this patch sounded a bit to thin. so I...
  21. ajnord32

    Money For nothing

    Here`s my money for N direct path. I`ve read that odd things were happening when Mark got the tone in the studio..one mic on the floor, another pointing the wrong direction.. He never could repicate the sound.. guess thats the reason why its so hard do dial in... and its hard to play .
  22. ajnord32

    An old classic

    .
  23. ajnord32

    Soldano rytm lead path

    Is a SOLO 100 RYTM /BOUTIQ 2-12 cab-block.
  24. ajnord32

    Soldano rytm lead path

    A soldano lead patch, Used on a Marillion/kayleigh backing track.
  25. ajnord32

    comfertably numb

    Axe change; Patch: CALILEG NUMB 1. Se on page 1
  26. ajnord32

    Eric Johnson Tone - Cliffs of Dover

    Nice feel an great tone. Spot on! Would like to try your preset if you will share it with us!
  27. ajnord32

    Recto red preset for 80`chops

    Here is a nice Recto Red V patch for some 80`chops and more. Scene 1 for rytm, scene 2 for lead. (Direct or through cab) Recorded a little jump sample.. https://soundcloud.com/ajnord32-1/axe-fx-ii-recto-red-vntg
  28. ajnord32

    a carvin leggy preset

    https://soundcloud.com/ajnord32-1
  29. ajnord32

    A little Guthrie Govan with the Carvin Legacy (FW 11)

    this one is hard to naigle. so many slides. Goodt job there.
  30. ajnord32

    comfertably numb

    Here is a path i use on the c. numb solo https://soundcloud.com/ajnord32-1/solo-numb-smy2d-a-mp3
  31. ajnord32

    Which bag/case are you using for the Axe FX and MFC ?

    You can build your own... I just did. All items are fixed in place.. and a handle to carry "][/URL]
  32. ajnord32

    MFC MKII cabeling question

    Hello folks Have a MKII with ethercon jack type cabel. I`m planning to fuse the cabel cause i have the MFC in a kind of case. So I need a short cabel. The Etercon cables are quite expensive..so im thinking of just using a standard nettwork cable.. ethernet cable. Question; Are the...
  33. ajnord32

    Show us your MFC setups! (post your pics)

    Thanks again. Yes your link is a Female/Female adapter to interconnect male Ethernet with male EtherCon. Think I go for this one. I probally need a short Ethercon cable to connect the "Best-Tronics Mfg., Inc.: FAS13" to the board. Such patch E-cables..
  34. ajnord32

    Show us your MFC setups! (post your pics)

    Thanks...I also fond this one , And I guess I also need a short E-cable Have req a company ELFA here in Noreay..
  35. ajnord32

    Show us your MFC setups! (post your pics)

    Yes... guess I`ll need a kind of "He & She" ends with a little chassis on the "she" to attatch to the board
  36. ajnord32

    Show us your MFC setups! (post your pics)

    Yes that would have been the best. Know where to buy ?
  37. ajnord32

    Show us your MFC setups! (post your pics)

    Thanks.. the units are fixed by the red 90 degree metal rails on both sides. So it can be carried without anything falling out. There is a hole between the to chambers where exp jacks is running. The white big holes in front have no actual function. But its easyer to see where to connect the jacks.
  38. ajnord32

    Show us your MFC setups! (post your pics)

    Here is a new one I made.. think it came out pretty good "][/URL]
  39. ajnord32

    Chef's Still Of The Night

    Love that album.. thanks for the preset. Will rock on tomorrow. want to crank it up right now .. ... but my lady probably kill me if I do..
  40. ajnord32

    Show us your MFC setups! (post your pics)

    thanks dude - I just did. But the the photos is not showing up.... just the links.. but guess this is the only way ?
  41. ajnord32

    Show us your MFC setups! (post your pics)

    Hello. I`m trying to uppload som pics of my board. But when i have to convert them to the size limits of 8Kb, the pics shows small and bad. Any Advice? Peace & thanks
  42. ajnord32

    Show us your MFC setups! (post your pics)

    Have been workin on some impovments of the board lately... will send picks tomorrow..... it will be superb.... i hope
  43. ajnord32

    Dumble blues

    Nice...sound and playing I`ve to have started to use the dumble.... really nice sounding fore lo gain leads
  44. ajnord32

    Axe-Fx II Firmware V11.02 and New Preset Banks

    How do you listen through the factory 11 presets without "axe manage" working in AE3 ( without messing up your esisting presets) Reg AJJ
  45. ajnord32

    Build a new case for MFC and my 2 BOSS exp pedals

    Thanks. The MFC and pedals are fixed to the unit. I`ll put a handle for transportation. I have a space in front there for cabeling. Will try to make a cover
  46. ajnord32

    Build a new case for MFC and my 2 BOSS exp pedals

    Builded a new case for the mfc
  47. ajnord32

    Voodoo Lab - Ground Control Pro

    I went from a GCP to a MFC101... so much easier to set up and use.
  48. ajnord32

    FW11 beta "Swap" bug

    Today It works fine for me to. Sorry for this one.
  49. ajnord32

    FW11 beta "Swap" bug

    yes
  50. ajnord32

    FW11 beta "Swap" bug

    Sorry for the spelling Swap .... the ability to save from one location to another... and the two presets changes place
  51. ajnord32

    FW11 beta "Swap" bug

    Swap...
  52. ajnord32

    FW11 beta "Swap" bug

    I seems to be a bug here. Could`t acsess the swap
  53. ajnord32

    Are you tired of FRFR?

    found it.. I\ll chech it out
  54. ajnord32

    Are you tired of FRFR?

    I like the cab lot. Its great. Where in the menu do I switch "p-amp" tubes for an amp in the AXE?
  55. ajnord32

    Are you tired of FRFR?

    Ive switched from a 2/50/2 tubes to a Matrix gt1000fx... but uses a guitarcab - VHT 212 delivarance speaker cab. The effects, cleans & dist rytm is great with the matrix, but I hav`nt - for now - got the same "compressed spine lead "scream" tone - with the matrix as I could with the tube...
  56. ajnord32

    Get Yer 11.0 Beta Here!

    Utility... 11B there is.. :-) thanks guys
  57. ajnord32

    Get Yer 11.0 Beta Here!

    Hello. I`ve backed up my patches and used fractal boot to uppdate to firmware 11B. I went like normal.. but in the G.menu it says "version 10xx". ? Is this expected cause its a beta? or is the FX not updated? Reg AJJ
  58. ajnord32

    Show us your MFC setups! (post your pics)

    My "homemade style" bord.
  59. ajnord32

    MFC case prototype

    Tanks , guess I`ll try to make another one with cover for it for protection.
  60. ajnord32

    Powered Speakers vs. Passive Speakers vs. Guitar Cab

    You can use out 1 to FOH with cab sim on and out 2 to your guitarcabs - without cab-block (if you put a fx-block to the left of the cab-block u will no get cab-sim to out 2) The matrix is a neutralsounding poweramp... keep PA-sim on if u will use this one.
  61. ajnord32

    2 brand new BOSS FV expr pedals

    The BOSS Expr are working fine... love them. Easy to set up
  62. ajnord32

    MFC case prototype

    Here`s some more pics. I used a rackpanel in front to cover the cables. I made some clamps with fabric underneth to fix the MFC and the Boss pedals to the frame. A wood panel is at the bottom. I just used som leftovers from a porch. I`ll mount a device to roll upp the cable later. Maybe I will...
  63. ajnord32

    MFC case prototype

    I`ll put on some. Its practical... can take the hole stach in a carry and do not have to plug more than one plug... and the jacks are protetected ..
  64. ajnord32

    MFC case prototype

    Its a rainy summer in Norway... so I made a prototype "pedal case" for my MFC-101 and the two BOSS Expr pedals. I can carry it .. and its only one jack to connect.. "plug`n play :)
  65. ajnord32

    FW 2.16 and Tuner

    Thanks guys... guess I forgot to do that when I was finished with the installation.
  66. ajnord32

    FW 2.16 and Tuner

    The tuner isn`t showing up in the MFC display anymore after upgrading to 2.16. Any tip to fix this?
  67. ajnord32

    MFC-101 New Firmware Version 2.16

    Yes I did.... I`s working fine now. The 2.16 file is transferred and installed in the MFC Thanks for helping
  68. ajnord32

    MFC-101 New Firmware Version 2.16

    Thanks.. from out From Axe to in in MFC i guess?
  69. ajnord32

    MFC-101 New Firmware Version 2.16

    Have to use midicable right?
  70. ajnord32

    MFC-101 New Firmware Version 2.16

    I`trying to uppdate from 2.15 to 2.16... Using Fractal boot... the file transfers, MFC in update mode, E-con cable,...rebooting the Axe when its finished But the FW is still 2.15 (shall the port be Axe FX II midi in?) Any tips what I`m dooing wrong?
  71. ajnord32

    2 brand new BOSS FV expr pedals

    I will I ordered them from Evenstad-music shop. I`m not sure yet how I will set it up.... time will show. Until now Ive used Scenes to have some ekstra output volume + - I`ve always used my pinky to swell tones or just to reduse the gain of a dist preset. There`s a lot that can be controlled...
  72. ajnord32

    2 brand new BOSS FV expr pedals

    Thanks I`ll dig into it in the weekend
  73. ajnord32

    2 brand new BOSS FV expr pedals

    Got these 2 babies yesterday. Thinking of volume (Pre or post) and Delay level... hm Any advise from you guys in yhe forum how to best put them to use with my Axe FX-11/ MFC-101 ? How do you do it? Reg AJJ
  74. ajnord32

    Quick question about master volume and preamp volume. please help

    You can use the level-nob in the amp block. and gain slider in the out section
  75. ajnord32

    Wanted; Guthrie Govan patch

    If someone have tweeked a nice patch for Guthrie G`s "waves" I would like to try them. Think its a cool song .. will try to learn some of the themes at least. Thanks
  76. ajnord32

    What next for my rack?

    Have to admit that i bought a 2u Matrix insted of a 1u ...cause it looks better in the rack...no other reason:mrgreen
  77. ajnord32

    Hard copy manual V10

    Really like to have a manual for FW 10 I`ve been bead-reading the FW8 the last couple of months (my girlfriend think I`m crazy ...and its probably true). I love the FW 10 so far. Have`nt got the chance to crank it loud yet, but I`m going to in the weekend. Will be a joyride.
  78. ajnord32

    I've just built the cleanest Axe-Fx rig you'll ever see (for a forum-member)! OCD

    Nice Work man!!! Really good job! (Tip; Mount some curtains in the front there and your whoman will exited too:-P)
  79. ajnord32

    Amp resetting

    I innstalled AE 1.9, bu hav`nt connected my Axe yet I created a new main folder I see that the sub folder AxeFx got presets as induvidual SysX preset files for all banks A, B, C. Is this the factory presets?
  80. ajnord32

    Amp resetting

    So the Axe edit 1.0 can be used with FW10?
  81. ajnord32

    Amp resetting

    Kan the new FW presets be tested without A Edit? I do not wish to overwrite my A bank
  82. ajnord32

    Amp resetting

    I See... Thanks! The First about 50-70 presets in Bank A are the one that I`ve tweeked for myself. Guss I`ll do this and tweek them for taste afterwards
  83. ajnord32

    Amp resetting

    Hey Must every amp in old presets be deselected/reselected to "grab the FW10 Feel" Or is it them listed in the release info? Reg AJJ
  84. ajnord32

    V10 Firmware

    Nice work :D Is there any way to listen through the FW10 presets without AE loading the banks?
  85. ajnord32

    V10 Update

  86. ajnord32

    V10 Update

    Nope... we`re staying awake..... But I think FAS rather wait for the night to come in USA:D
  87. ajnord32

    V10 Update

    Nice..its spring.....the snow is melting up north..I think l`ll go skiing...in a half-pipe.... hope to break my legs... so I can stay home playing with FW10 & tweeking my Axe Fx II all day long.
  88. ajnord32

    Help & Scene-question

    With AE2....."soon".. thanks...guess it cant be done from the Axe-II front panel. Its not a major problem.. I`ll wait for that
  89. ajnord32

    Help & Scene-question

    Thanks I was thinking more simply...moving a scene nr in a preset to another scene nr. such if i load in a complex kind of preset with 8 senes (and I`ve just set up 4 scene I.A`s on my board) Maybe I want to use 3 of the scenes in that preset.... and lets say scene 3 5 & 7. Can I order them as...
  90. ajnord32

    Help & Scene-question

    Hello Is it possible to (in a fast way) move/ swap lets say scene 6 to scene 3? Thanks!
  91. ajnord32

    BOSS 500.. low or hi impedance?

    Thanks guys I`ll do when they arrive
  92. ajnord32

    BOSS 500.. low or hi impedance?

    Ive ordered 2 BOSS FV 500 for use with my MFC 101- Im thinking of using one of them for volume out 1 or 2. The other for delay & reverb mix level . Guess this could be done? I`m I right? Thanks
  93. ajnord32

    BOSS 500.. low or hi impedance?

    Ordered two BOSS FV500 H`s .. hope to put thrm to work:-P
  94. ajnord32

    Matrix Stuff!

    Got to put in that my 2/50/2 tube power amplifier feeds a 16 Ohm 2-12 stereocab way mutch more output volume than my matrix GT 1000 ( 2x 150W at 16 Ohm). I prefer the Matrx for more easy FX tweeking..and the volume is high enough. The cleans & rock tunes sits better with the Matrix. If I were a...
  95. ajnord32

    BOSS 500.. low or hi impedance?

    Been locking for expression pedals for my new MFC-101. Have checked out the boss 500 H & L Low & high impedance. Whats the fifference? Whats the the best choise for Axe-II /MFC-MK-II? Thanks AJJ
  96. ajnord32

    Do I need a powered amp?

    Some use a tube poweramp & guitarcab (cabsim of, poweramp sim on or off) Some use a FRFR poweramp & guitarcab (Cab sim off,PA sim on) Some use a FRFR Poveramp & passive cabs ( all sims on) Some use Active FRFR amp/speakers. (all sims on) Whats the best? Its subjective and no one got the...
  97. ajnord32

    MFC arrived.. happy man

    Yes I purchased it from G66/europe.
  98. ajnord32

    MFC arrived.. happy man

    Its a relief for me who dont like spending all that time making midiboard to work. Also love that the AXE-patchname & active & inactive blocks shows in the the board without telling the board in every preset. From G66/germany they ship really fast.
Back
Top Bottom