Search results for query: *

  • Users: fisioaura
  • Content: Threads
  • Order by date
  1. fisioaura

    Volume of the drives

    Hello folks, maybe an user error but I realized that the drives don't interact the same in terms of volume when I use them with AMP modeling + FRFR (out1) Vs. Real amp ( Vox ac30) (out2). It seems like there is an overall compression that limits the volume when the Distortions hits the block...
  2. fisioaura

    My axe reminds the scenes level changes without store them!

    Hi, I'm not sure if is the normal behaviour but after years of playing with the axe last gig made some scenes level changes on the fly with the MFC on several songs and obviously didn't stop the gig to store them. Yesterday noticed that those level changes are still applied to each scene...
  3. fisioaura

    Tweed De Luxe

    Has always the Tweed Deluxe been a no negative feedback amp in the axe or only in Ares 2.0?? Thanks
  4. fisioaura

    What the hell happens to my Axe?

    My story: I was satisfied at 95℅ with the sound of the axe with Q. 10.01. After reading the opinions here abouta Ares 1.03, finally decided to update (backed up my presets in bank1). The first time It sounded horrible with an annoying fizz so in my presets. Updated again and It was better but...
  5. fisioaura

    MFC -101 Mark I with Axe-Fx 2 Mark II

    Hi, I´ve decide to go to after a used MFC. I´ve found a mark 1 but I own the axe fx 2 mark II. Is there any problem in compatibility? Are the capabilities at 100%. Thanks
  6. fisioaura

    Doing something wrong?

    Hay guys, I've tried to run trough a physical power amp + cab with the ac30 tb model (Output 2).So turned supply SAG to 0. Is It normal that I have to level the amp's output until -27 db's in order to avoid Output 2 clip?
  7. fisioaura

    Amp settings and IR's

    Hi, maybe a noob question, but here it is: When capturing a speaker's IR, is therere an influence in it depending on the settings of the amp (eq,gain, presence,...)? In other words, have the speakers their own IR by It selves, how or wherever been captured? Or depend on the preamp, the...
  8. fisioaura

    Vox ac30 tb 9.02

    Hey guys, I might be wrong but a I feel this amp too gainy compared to previous firmwares... I thought that the speaker comp default setting was 3 not 0....wasn't It?
  9. fisioaura

    Improved Delay Block in 9.00

    Hi guys! Anyone noticed a mayor improve in the delay block? I´m quite satisfied in 8.02....
  10. fisioaura

    USING THE REAL AC30 JUST LIKE A CAB?

    Hi Guys, technical question: I´m running Axe to FOH and OUT 2 to a real ac30. To small gigs the ac30 it´s so much loud so I wonder if I can conect the axe to the rear of the speakers ( it´s a custom clasic model and it has two RCA inputs and a 1/4 jack input) directly bypassing everything for...
  11. fisioaura

    Ac30 tb: too much high end in Q 8.01?

    Hey Guys whith a strat and bass:6,mid:5, treb:3 I feel to treebly this model. I like those highs but I can't get the body...If I turn Up the bass more then LP's are very muddy..Anyone else? Thanks
  12. fisioaura

    Axe Fx Funk Wah U2's mysterious ways

    Hey guys finally I'm satisfied with my preset. Just sold my Korg A3..
  13. fisioaura

    Supply sag doesn't support global amp block?

    I' ve just noticed that the supply sag knob is not the same value across my presets in my main amp wich is a global amp
  14. fisioaura

    Some tips or settings for ducking delay?

    Hello! Maybe it's just me but I can't get the ducking function work...any tips?
  15. fisioaura

    Old simple question not solved (at least for me)

    Hello guys, I´ve notice a level drop with all blocks bypassed (about 4-5 dbs) when use the Output 2 (via FXL) to feed my amp comparing to feeding the amp directly with the guitar. I used to think that turning all the way up the out 2 frontal volume knob was the way to get the same signal in the...
  16. fisioaura

    Question about drives and boosters

    Hi folks! It seems that the drive knob in every boosters doesn´t drive the sound, just push the amp increasing the overall volume as the level knob does. Is that correct? I use a real amp. On the other hand, what is the warmest overdrive in the axe ( have no time to try them all) Thanks in...
  17. fisioaura

    Question about volume block Vs volume in the drive block

    Hello folks, I've found that with some drives I have to down the level to 0.75 or so in order to keep the overall level under control...and I wonder if in this digital world, is it would be the same to up the level of the drive block and use a volume block to compensate or it would sound...
  18. fisioaura

    Pops in classic whammy when set -1octave

    Hello! I have a preset with a pitch block in classic wahmmy -1 octave mode. When I open the expression pedal to drop -1 octave I hear pops even without play the guitar. The CPU is around 70% only.
  19. fisioaura

    Quantum and drive block

    Hello folks! I´ll wait until the final release to install this new firmware but I wonder if this new paradigm affects the drive block as G3 modelling did. Thanks
  20. fisioaura

    Drive parameter in delay block

    I'm away from my axe... So I don't know what's happen with the delay when is before the amp that needs to be driven. Has it a different behaviour when place after the Amp?? Thanks !!
  21. fisioaura

    What kind of midi cable do I need to feed the ground control pro with axe?

    Hello folks... That´s it. What kind of midi cable (7-7 or 5-7 pin) do I need to feed the GCP trough the axe. Thanks
  22. fisioaura

    Mysterious Ways tone. Korg A3 vs. Axe Fx II

    https://soundcloud.com/edgemurciano/mysterious-ways-tone-korg-a3
  23. fisioaura

    Please, explain boost / pad function

    Hello Folks! After 2 years I don´t know what the function boost / pad does exactly....:? I used to think that a boost knob raises the signal and a pad knob decreases it, so I don´t understand why we have the same knob for both... On the other hand, what is it the best I/O set up to use axe as...
  24. fisioaura

    boost/pad function. Can you explain this?....

    Hello guys.I've tried to run output1 to foh and output 2 to real ac30cc2x. I've noticed more clean headroom in the real ac30 top boost channel, so I've gone to I/O menu,status page, and output1 is hooter than output2. Then, if I turn up the boost/pad 18db the level the status bar grows up and...
  25. fisioaura

    ts settings to get the ts9

    Goord morning guys!! Can you help me??
  26. fisioaura

    ac-30 top boost question: HIGH or LOW INPUT?

    What input is modeled in the axe, the high or the low input?
  27. fisioaura

    I HAVE NO WORDS... Fractal you did it!!!!

    :shock:applouse::applouse:
  28. fisioaura

    Question about connecting direct to FRFR

    Hello guys: I´ve runnig direct from the axe fx to mixing desk in the last 5 or 6 gigs. We use two passive speakers feeded by a power stage. For rehearsals, I have connected the axe directly to power stage (without use the mxing console) and then to the passive speakers and wondering if I must...
  29. fisioaura

    question about copy out 1 to out 2

    Hello. I´m runnig to signal paths. The first one is a complet signal path direct to frfr in out 1. The second one:Just before the amp I take the signal into a fx loop block to conect to a real amp in out 2. The question is: If in the global menu the option "copy out 1 to out 2" is on, the signal...
  30. fisioaura

    HELP: CANNOT UPDATE TO V.10 WITH FRACTAL BOT

    Last night I tried to update for five times with fractal bot and the the process was interrupted sometimes at 30% other times around 50% and even around 90%. The message said that probably I was using the axe in the update firmware mode. What can I do? Thanks
  31. fisioaura

    Question:is there any way to copy Bank A to Bank B? Thanks

    I want to get two signal type for differents rigs. Is it possible or have to do one by one'?
  32. fisioaura

    strange behavior

    Can you help me?: I have a problem with the drive block. In one of my presets, by default, it must be bypassed and when I switch cc1 ( on ground control pro) it must be turn on. But when I go from other preset and back to this, the drive block is on and I have to send cc1 for two times to get...
  33. fisioaura

    SCENES AND GROUND CONTROL PRO

    Hello folks!! What cc midi message must be sent from GCP to go, for example, to preset 5, scene 2 directly from preset 1? If it´s not possible, in the same preset, how can I go to the diferent scenes with cc messages? Do you undestand me?;) Thanks
  34. fisioaura

    heeelp!!! Axe Fx II Freeze in one preset!! FW 9.00

    Hello! Can you help me? I was playing normally until I recalled preset 80. It sounds normally but when I wanted to change the preset the axe got freezed on this preset and the sound dissapears. I have turned on-off many times and always the same At first the preset 80 sounds but when i try to...
  35. fisioaura

    heeelp!!! Axe Fx II Freeze in one preset!! FW 9.00

    Hello! Can you help me? I was playing normally until I recalled preset 80. It sounds normally but when I wanted to change the preset the axe got freezed on this preset and the sound dissapears. I have turned on-off many times and always the same At first the preset 80 sounds but when i try to...
  36. fisioaura

    hi cut or presence? Wich is actual?

    Hello folks! I use ac30 tb in my presets and there´s something that I don´t undestand. I´m runnig V.8 and in old presets it appears "presence" in the second page but when I try to create a new preset with de ac30 it appears "hi cut", instead "presence" except if I recall the ac 30 from the...
  37. fisioaura

    settings on a mixing console to hear the same from PA and earphone

    Hello. I´ve tried to connect the out1L and out1R to the channel 1 and channel 2 respectively on the mixer to get the same sound that I get from earphones out. The channels aren´t one stereo, but two mono and I loose the repeats of the delays, etc. I have tried to invert phases, but I cannot...
  38. fisioaura

    Use two amps, less quality?

    Hello folks! In the manual it says that when you use two amps at the same time the axe works in low resolution or something similar. Have you noticed this? Or it sounds the same? Thanks
  39. fisioaura

    2290 delay

    Hello. When i put the 2290 delay before the amp and cab it doesn´t produce any repeat. :roll. Any idea. Thanks
Back
Top Bottom