Search results for query: *

  1. S

    can an electric guitar pickup "fail"?

    Id be willing to bet a Dunkin Donut that the issue is with your wiring. You have a ton of wires, circuit boards, and solder joints crammed in to a conductive cavity. If it were me I'd start poking around in there with a chop stick to see if I could identify a loose connection. Short of that a...
  2. S

    I'm Just Going to Leave This Here

    How about his add on model.... Seems like it would fly well with this group. Soon = Free Sooner = $$$ Ha!
  3. S

    Problem updating MFC

    Bad cable...... D'oh!
  4. S

    Problem updating MFC

    I'm set with the above. MFC never changes. I'm going to buy another midi cable today, hopefully it's just that.
  5. S

    Problem updating MFC

    What am I doing wrong here? I have USB adapter mode "ON", SysEX to "NONE", MFC is in update mode, MIDI out from Axe to MIDI IN on MFC and running Mac 10.7.5 with the updated USB driver. Fractal Bot is insisting the the port to use is "AXE-FX MIDI In" Shouldn't it be the MIDI OUT/THRU? When...
  6. S

    How to skip multiple FW updates?!?

    I'll probably just wait it out.
  7. S

    How to skip multiple FW updates?!?

    Is there a suggested way to get a 'fresh' firmware and presets in the AxeFxII? I've been away since 12, and would like to jump straight to 15. I'm fine with dumping all presets and whatnot, seems like it would be easier to start over for me than to do the amp reset up / down thing.
  8. S

    13.0 Frozen w/ axe edit 3.04 - communication timeout (FIXED)

    Seeing the same thing. I was doing a lot of copy paste......
  9. S

    Overdriven bass sounds!

    Less is more sometimes. Exhaust what you can do with the base tone and cabinets before you add filters and drive. Here's your patch reworked in scenes 2 and 3.
  10. S

    Overdriven bass sounds!

    I tried your patch, a little bright on my system. I'll mess with it a bit though. In the meantime, check out mine and let me know what you think. http://forum.fractalaudio.com/axe-fx-ii-preset-exchange/81467-these-bass-amps-fun.html
  11. S

    These Bass Amps are fun!!!!

    Having a lot of fun with these today. Figured I'd share the preset. Scenes 1-4 are what I've been messing with and 5-8 are the same as 1-4 but with drive. Made this using a P/J Bass through CLR's. Watch the low end.
  12. S

    Axe-Fx II Firmware Version 13.02 Released

    No errors here, super smooth.
  13. S

    Axe-Fx II Firmware Version 13.02 Released

    Can't wait to check out the 'USA Bass 400'…. my all time favorite bass amp!
  14. S

    Recto Fast HC/PUNK

    \m/
  15. S

    Wish Inverse Reveal Mode

    I like this a lot. Ever since scenes I've been running with bank 'none' and just paging up down for presets. Being able to invert that reveal function would bring more use to the reveal button and make presets more accessible.
  16. S

    Presets for all 12.03 amps w/ cabs

    Flipping genius!!!! I'd love to see all the factory patches be set up to highlight the amps and cabs in this way. To add to it they could tailor a 'sound' of that amp to each scene that excels with certain types of rigs or guitars.
  17. S

    Panning with the looper?

    Bump for more eyes…..
  18. S

    What's your preferred Boost method?

    Tell me more.....
  19. S

    Ernie ball vp jr. Question

    Just keep in mind that when you use a volume pedal as an expression pedal, the taper will not be very natural. Make sure that whatever you get has a LINEAR taper pot. The Ernie Balls you mentioned will 'work'…. but not very well. I modified mine to work after not being satisfied with any...
  20. S

    Divided by 13

    Nice sounds, especially like the feedback. I've been struggling to get a natural feedback. Any chance you can give me details on the equipment that you're using and more details about the patch?
  21. S

    Panning with the looper?

    I tried a search, but could not find anything. If you know of a good post, please point me to it. I'd like to setup a patch that separates a signal when the looper is engaged and playing. So to start the patch would be L+R. When a loop is recorded, on playback, the loop switches to hard...
  22. S

    What's your preferred Boost method?

    I added a PEQ with an extra 6db of level at the end of my presets, using an IA switch to trigger…. what's everyone else doing?
  23. S

    Ultimate Ernie Ball Expression Pedal Mod

    The dead spot at the end of the Boss FV500's always annoyed me. I took one apart and realized that it's a mechanical issue, not anything to do with the pot or it's sweep. Tried a Mission/Dunlop style pedal, and could never get used to the height of that style chassis. Ernie Ball volume pedals...
  24. S

    What do you run between your guitar and the AxeFx?

    Didn't think this would turn in to a cable and wireless discussion, but I guess that's a valid answer! Was really wondering how many people were using boosts, buffers, or other sorts of pedals.
  25. S

    What do you run between your guitar and the AxeFx?

    When running traditional amps I always ran a Zvex SHO and a few pedals. I've been able to replicate all the pedals and yesterday threw the SHO in front of the AxeFx just for the hell of it. Boom! Even with the volume at its lowest setting, a part of what I've been missing in my sound has...
  26. S

    Axiom For Tweaking Patches

    There was a guy working on doing that with a Behringer BControl for a while...... From what is remember the limitation is the type of SYSEX messages the controller sends. You would be able to program feature using a {controller} but not things like tone pots and gain levels.
  27. S

    I'm so torn!! Please help me!

    I'd go with the RJM. They've been in the game longer building MIDI switching products.
  28. S

    Basic wireless question

    I've read that sometimes standing too close to a wireless receiver can cause drop outs. Anyone experience this? Never had a wireless but am, getting sick of stepping on my cable while changing patches on the MFC. FWIW I'm considering one of the Line 6 units.
  29. S

    Modeled Mic Question and IR's

    That all make a lot of sense, and confirmed what I thought I was hearing. I'm preferring the cab sims, without using a mic. I remember a few years back messing with one of the IR programs out there and there were a million options for each mic recorded at different distances and portions of...
  30. S

    Modeled Mic Question and IR's

    Been dialing in some sounds again, and had a question about mics in the cab block. Are they essentially just a filter on top of the cab IR? .... or does it mean that the IR was actually recorded with that mic? If they are just a type of filter, do most players set up live patches without a...
  31. S

    Random AxeFX III ideas

    There should also be an OCD setting that eliminates the decimals!
  32. S

    I constantly feel like I'm guessing with my Axe FX II

    A real good way to tweak is to place the looper first in your patch, and record something that covers a lot of the fretboard. Let it loop and listen to how everything changed
  33. S

    vox ac15 and orange 2x12

    Orange cab with the Vox may sound pretty muddy. I ran an AC30 had through one for a while and was only happy when I built a new open back for the cab.
  34. S

    Could use some advice...

    If it's that integral to your rig I would buy a backup or search for a replacement. The backup would prevent you from losing money, but invests you more with the company that you're having issues with. If you go the replacement route, hash it out on their timetable and dump the piece after...
  35. S

    Dear Fractal Doctor, my band likes to practice in the dark

    I've done it and kind of liked it. Not to many of the pros spend a whole show looking at their hands... a lot of amateurs do. I'm definitely in that second category but can see the benefits of it if you're goal is to entertain others.
  36. S

    Best way to setup a volume pedal?

    I'm placing mine in front to mimic a volume pot on a guitar, so putting it after amps wouldn't get the result I'm looking for. Tried to tie it to CC10... didn't have any control over the sweep and wasn't what I'm looking for. On Per Boysen's suggestion, I messed around with the settings...
  37. S

    Good intro FRFR cab

    Decided to go with a CLR..... seems to be all the rage. I'm guessing if that doesn't turn me to using FRFR, nothing will.
  38. S

    Best way to setup a volume pedal?

    Knob is set per Boss manual at minimum Each pedal ranges 0-115 when I calibrate.
  39. S

    Best way to setup a volume pedal?

    Yes, the lower 20% of the volume is too low and 'cuts out early' when compared with my Ernie Ball pedal. I've tried adjusting it, and can get the sweep to feel right but then the heel down position is never at full mute.
  40. S

    Best way to setup a volume pedal?

    When using traditional amps, I've always played using an Ernie Ball volume pedal at the start of my signal chain. Is there much of a difference between assigning an expression pedal to control Input Volume (cc10), or putting a Volume block at the start of the chain? I messed around with...
  41. S

    Good intro FRFR cab

    Good thought. I already have the GT100.... that might be pretty cool. The patches that I'm having the most issues with are clean Vox and looping with effects. Just sounds muddy through the Orange cabs, although the high gain sounds great.
  42. S

    Good intro FRFR cab

    I'll consider anything so long as they can keep up with a band and are in stock.
  43. S

    Good intro FRFR cab

    Good intro FRFR cab? Haven't been on the forums in a while and recently upgraded to v12. I've been rocking in headphones and realized that I'm missing out on a little something using my traditional cabs and would like to try a FRFR cab. Looking for suggestions. It can be powered or passive...
  44. S

    What's a good tablet (andriod or win) for under $150

    Just picked up a Samsung Galaxy Note 8 through ATT for $200. A little more $ but very cool.
  45. S

    Fryette Deliverance Question

    Anyone know how v10 handles the two gain control knobs on the Deliverance model?
  46. S

    SPDIF and sample rate

    When running SPDIF to to an interface, does sample rate come in to play? I know it's at 48kHz via USB, but wasn't sure if it matters via SPDIF.
  47. S

    Best way to Interface with Axe2?

    AxeFxII SPIDIF Out >>>>> Saffire SPDIF In AxeFxII SPIDIF In >>>>> Saffire SPDIF Out
  48. S

    Best way to Interface with Axe2?

    When you get your interface, A/B the SPDIF and 1/4 connections. I can hear a difference and prefer running SPDIF. I cannot think of a good reason to run the 1/4 out's on the Axe in a setup like this. You get a stereo signal over one SPDIF cable, OUT from the Axe > IN on the Presonus. It...
  49. S

    Next batch of CLRs?

    All squared away now.
  50. S

    Next batch of CLRs?

    The website does say that you should receive a confirmation within 24 hours..... I never received a confirmation either.
  51. S

    Stacking CLR Cabs

    Stacking CLR Cabs, Good or Bad Idea? Would there be any phasing or coupling issues with stacking two of the CLR cabs on top of each other to process a stereo signal?
  52. S

    FRFR in a VERY loud band setting?!?

    Thanks for all the advice and concern. Trust me, I fully understand the practical and health implications of high volume. I personally take the proper precautions, everyone else not so much. This is just one of those bands that I play with from time to time and am trying to justify the FRFR...
  53. S

    FRFR in a VERY loud band setting?!?

    It's not really an eq question, I have a handle on that. It's a pure volume question. The band is VERY loud. A stupid amount of volume for a 14x14 room. Loud drummer, Marshall full stack, Ampeg SVT and 810, etc. Would showing up with something like a CLR be the equivalent of thinking I...
  54. S

    FRFR in a VERY loud band setting?!?

    Anyone doing this with great success? Typically I rock the AxeFx at home and a 100W tube head at practice. I've had my AxeFx there with a Matrix 1000 driving a pair of 4x12's and it's loud enough. Wouldn't mind ditching that for a powered wedge or Atomic CLR. Would that be able to "keep up".
  55. S

    Amazing performance with Cello, Bass, and Looper!!

    Call me a noob, but I think this type of thing is really cool. Can you post a better use for loopers? I'm just getting in to them and am interested in what could be better?
  56. S

    What is a great passive FRFR monitor? Too many choices out there.

    So how do you like these?
  57. S

    Tracking with multiple modelers?

    Is there any way to record multiple digital tracks using multiple modelers? Example would be two AxeFX II's and one Eleven Rack. I'm fairly confident this couldn't be done via USB, but am not too familiar with the Digital IO formats offered on the Axe. What kind of interface would I need...
  58. S

    Will MFC-101 fit into Pedaltrain 2 Hard Case?

    This one rocks as well. 18" x 12-3/4" x 6" Aluminum Case
  59. S

    What's the smoothest way to switch amps in a preset?

    Argh.. after a while I got it. Realized that the problem was in my grid. I had the amps in the same row, not different! Seamless switching between Amp 1 & 2! Now to figure out the best way to flip between all four sounds... maybe I'll just wait until scenes.
  60. S

    What's the smoothest way to switch amps in a preset?

    Are modifiers something that you set on the MFC, or on the AXE? When I pull it up in the control menu it just says NOT USED and can't find where to assign it to the Amp1 or 2 CC.
  61. S

    Can you pan the stereo looper?

    When running a stereo setup, is it possible to record a loop and have it automatically play back panned? My ideal would be after playback starts the right side is 80% loop and 20% live playing, with the reverse ratio on the left. I've been searching and can't figure out how to get this done.
  62. S

    What's the smoothest way to switch amps in a preset?

    @ Clarky - Thanks for the summary, I started digging in to your post and haven't wrapped my brain around half of it yet. What does XS mean though? Expression pedal? Are you using two MFC buttons and one Expression for this?
  63. S

    What's the smoothest way to switch amps in a preset?

    Looking to set up four amp sounds in one patch, what's the best way to get this done? Was thinking an expression pedal to move from AMP 1 and AMP 2, and two switches on the MFC for AMP X/Y.
  64. S

    Which output for Matrix power amp?

    Subscribed for the final answer on this one. I thought the only difference between Out1 and Out2 was that Out1 could be used as an FX loop, and Out2 has the Humbuster tech that gives a +6dB boost when using the correct 1/4" cables. Didn't know there was an actual tone difference.
  65. S

    Advice with Specific Setup

    No direct experience, but I've never walked away from a movie thinking it would have been better if their system sounded better. Can't say the same for a lot of venues and bands I've paid more to see. I'd bet that most movie theaters should be able to deal with your signal just fine.
  66. S

    Preset Bank Question

    Just trying to wrap my head around it. If I load the v7 presets in with v8 software, what exactly does the act of "refreshing" the patch actually do to the settings?
  67. S

    Preset Bank Question

    I remember reading somewhere that when you upgrade firmware, you're supposed to change the amp to another model, and then back again to "reset" the patch for the new firmware. Do you still have to do the same thing if you're on 8.01a and then load the v7 preset banks in to the unit? Also, is...
  68. S

    What MFC lay-outs and settings are people using to control Scenes?

    Pretty sure I'm going to set up the Reveal function for my scenes. Not sure yet if you can "page" through scenes like you would a bank switch. That would be nice too.
  69. S

    Is it possible to power the Rocktron Raider with the Cat5 Port on Axe 2?

    If you're running 7pin and phantom in the Axe, grab the base of a foot switch ;-)
  70. S

    Is it possible to power the Rocktron Raider with the Cat5 Port on Axe 2?

    FWIW I went down a similar path with the Raider, but instead of using the MFC port, I was searching for a less bulky adaptor. I found that any power supply less than 1000mA is not enough current to allow it to operate with consistency under normal use. At 1200mA it operates normally. On top...
  71. S

    'Current Mode' solid-state power amplifiers

    They've never really been forthcoming about exactly why a Matrix Gt10000 would be better than something like an ART SLA2 Linear Power amp; aside from features like connectors, size, and weight. Would be nice to get a straight answer on that one. I just have to assume that the statement is...
  72. S

    'Current Mode' solid-state power amplifiers

    I'm with you. The nice thing about a rig using guitar cabs is that I already have them, and don't have to chase more sounds using IR's. I was under the impression that all the interaction between frequency and impedance was simulated by the Axe so that a flat response power amp like the Matrix...
  73. S

    Cat-5 cables.. ethrcon to cat5?

    Is there an advantage to running the Cat5 vs MIDI cables?
  74. S

    Problem with MIDI + Phantom power + USB connection of a pedalboard

    You should contact support. I've been in touch with them regarding a similar issue and am waiting on the response.
  75. S

    Is MFC 101 the AXESS ELECTRONICS FX1?

    Reincaster is right. You have to store the patch as it sits in the Axe to the Raider per state. Does anyone know what is "special" about the Liquid Foot products that allow them to show the IA states and patch names from the factory?
  76. S

    Will the FCB1010 do this?

    I like this tip. Not using a whole lot of presets yet so it will work well.
  77. S

    Is MFC 101 the AXESS ELECTRONICS FX1?

    The last week I've been battling my ignorance of midi programming, but Rocktron support has been great so far helping me through it. Today I finally have the pedal set to work with my two banks of presets and the looper. Won't pass judgement on it either way for a while, but overall it's doing...
  78. S

    AXE Rig is shocking me!

    Newer to running a rack setup and am having a slight issue with electricity and what seems to be a grounding issue. When I use the MIDI Phantom Power In jack, the chassis of my Rocktron MIDI Raider is live. Noticed it today while playing and trying to program it barefoot! The problem only...
  79. S

    tap tempo on MFC-101?

    Is it easier to have the switch set to momentary?
  80. S

    Post your Looper settings!

    Wondering how everyone sets up their looper? Particularly interested in any unique momentary/latching settings or creative use of multiple CC's on a switch or SysEx messages.
  81. S

    are certain amp models meant to have low volume levels?

    Would be cool to do with all the parameters.
  82. S

    SysEx Byte Values and the Rocktron Raider

    So what you're saying is that it would essentially take someone that is able to custom program a replacement chip or software set for the Raider to have it actual communication to the Axe? Kind of like what was done with the Behringer EPROM?
  83. S

    SysEx Byte Values and the Rocktron Raider

    Ok. I thought a feature like the SysEx bulk load outlined in the manual would be a way to get the two units talking. Seems like Rocktron would really have a winner on their hands if this unit could be flash programmed for the AxeFx. $400 out the door and in stock! Did anyone ever figure...
  84. S

    SysEx Byte Values and the Rocktron Raider

    Thanks, that makes sense now. I ended up setting up the IA's as you described. There still is a little bit of funky behavior though, every once in a while the Axe will show that the patch has been edited when I hit a preset, even though the IA's are all set to match the preset. The Raider...
  85. S

    SysEx Byte Values and the Rocktron Raider

    Trying to program a Rocktron Raider and it allows for the assignment of byte values, for each byte of the system exclusive message. Anyone know what I should be putting in that field? Each of the 7 bytes allows the option of 0-127 and EOX (End of Exclusive).Seems like that's the only thing...
  86. S

    Matrix GT1000FX First Impression

    Subscribed for the second impression.
  87. S

    Can anyone tell me what effect is being used here?

    I say some reverse delay.
  88. S

    Is MFC 101 the AXESS ELECTRONICS FX1?

    Same boat here, been waiting since July. Solved the problem today, Rocktron got my for the MIDI Raider. Seems to do everything that the MFC-101 does with the exception of the tuner and two color LED's. Bonus is that it fits in a rack drawer!
  89. S

    Background Noise

    At 0:34 I say cell phone in the pocket.
  90. S

    Balanced Output Connection

    I went ahead and made the cables anyway. It eliminated the issue of radio stations coming through my rig, so that's a bonus. Seems quieter when you're not playing too. FWIW I'm running a power amp in to guitar cabs.
  91. S

    Balanced Output Connection

    Would the specialized cabling have any noticeable advantage when using just a power amp and guitar cabs? Seems like less noise is always better!
  92. S

    Balanced Output Connection

    Guess I was confused by the stress on the connection cabling in the link vs. just saying that the outputs were unbalanced, regardless of the cable used. At least there's the benefit of lower noise.
  93. S

    Balanced Output Connection

    Does using the 1/4" jacks on Output 1 & 2 with Humbuster cabling provide a 6dB boost of that output's signal? Or does that refer only to the XLR jack? Balanced/Unbalanced connections - Axe-Fx II Wiki
  94. S

    Will the FCB1010 do this?

    Thanks for the feedback. It' seems like even with my basic plan, I'd have to make some compromises with switching so I suppose I'll look in to another unit. I see that you use the Liquid Foot gear. Was wondering if what I want to do could be accomplished with the Jr? I did speak to LF and...
  95. S

    Will the FCB1010 do this?

    So fair warning here, I'm really new to the concept of MIDI, but would like to get a controller for the Axe. Wondering if the FCB will do all of this well, and if there are any major drawbacks to the unit. I'd like to be able to swap between five patches and add/subtract a few pedal blocks...
  96. S

    Musical Feedback and the Noise Gate

    I do get a fair level of feedback with the gate off, but like you mention, not quite the same. I'm kind of hoping that something in the speaker or dynamics section of the amp block affected it somehow. If there are any power users out there that might know which of those settings may help, let...
  97. S

    Musical Feedback and the Noise Gate

    Seems to feedback best with the threshold setting all the way down, OFF and flipped output polarity.
  98. S

    Musical Feedback and the Noise Gate

    Just thought there might be some deep edit parameters that I'm not thinking of because I'm so new to the unit. I can mess with the eq, but I literally have two stacks of identical cabinets and a real D60 in the same room, so I'm able to A/B them. The patch sounds and behaves like the real amp...
  99. S

    Musical Feedback and the Noise Gate

    I edited my main high gain patch to reduce the threshold to a point just below cutting off the feedback. I also read that flipping the output polarity might have some affect, which it did. Are there any other ways to get the feedback to work a little better? I'm running an A/B right now...
  100. S

    Musical Feedback and the Noise Gate

    Like the title says, looking to get some info on how to set this up well. I use controlled sustaining feedback quite a lot, and it's the only thing I'm having a hard time dialing in. Never having used a noise gate before, I'm unsure of how to set up the parameters. I can get it to work, but...
Back
Top Bottom