Search results for query: *

  • Users: aens
  • Order by date
  1. aens

    Album-perfect NIRVANA Tones (w/preset)

    Wow, that IS perfect! Did not know I have the same cab as Kurt. Here's an Ultra-Res impulse of an late 80's 1960B cab with G12T75 speakers (both 8 ohm and 16 ohm versions) :)
  2. aens

    Axe-Fx III Firmware 25.00 Public Beta (Cygnus X-3)

    I was just struggling yesterday with a Marshall sound where I could not get the high end sizzle just right. Tried different amp settings, changed drive pedal settings, shoot new IR's with multiple mics, but none of that seemed to work. Too bad I did not check for new FW yesterday because I...
  3. aens

    New DynaCab™ Pack - York Audio 4x12 Recto

    That’s an interesting and impressive mic collection. Not that much into Mesa cabinets, but the mic selection alone really grabbed my attention.
  4. aens

    My JCM800 Just Blew Up

    Working As Intended
  5. aens

    My JCM800 Just Blew Up

    This or it could be just a regular check to see if the model is WAI.
  6. aens

    My JCM800 Just Blew Up

    From manual: ”If you don’t like the sound of amp model components breaking, you can adjust the loudness and transient with Amp Component Break Level and Oh Snap -parameters. You can also turn down the level if you don’t want to hear the components break. In case you don’t like the default smell...
  7. aens

    Why do some IR's and DynaCab's seem to compress more than others?

    That’s a good tip. Easy to listen with headphones without preamp vs with added preamp distortion if your preamp has a headphone output. I thought the Mic+Pre IR shoot method would neutralize that, but realized that’s not the case. Shooting your own IR’s is a lot of fun if you have a great...
  8. aens

    Axe-Fx III Firmware 24.05 Release

    I played with this new firmware for almost 10 hours non stop at the rehearsal space last weekend. Was supposed to leave after two hours but just couldn’t put my guitar down. I’m now approaching exactly how I’ve been wanting to sound for over 10 years already. Massive thank you for all the hard...
  9. aens

    Forgot he was in a restaurant gig

    That's great, but could you play more of that Hotel California? ;)
  10. aens

    I find the Plexi models all quite dark. Explanation inside. Any help?

    Try this '87 G12T75 4x12 Silver Jubilee (8 ohm) SM57 IR I just made yesterday. Change the amp to 2203 JCM800. If it's still dark, there might be something going on in your setup. It's matched to a real recording which is really bright, so don't be surprised if it sounds ice picky to you. I mix...
  11. aens

    Marshall 1959 SLP - Plexi preset build

    That sounds great! I especially liked the filter + Bender fuzz tone. Nothing beats a dynamic Marshall sound IMHO. I always use delay before amp. If it gets too messy, try lowering the mix. You can go as low as 5 %. I’ve just found out the cabinet also plays a big role when using delay before...
  12. aens

    Wish Custom Speaker Impedance Slots

    +1
  13. aens

    Ed, Stevie, Jimi & Howard... Demo, preset, free download, etc

    You should call that preset Kings of tone. Good god that reverb sounds so good!
  14. aens

    Did we forget to celebrate the 6-year anniversary of the Axe-Fx III in January?

    I remember I was on a holiday in Indonesia when the III announce came out of the blue. I panicked and rushed to get myself in the waiting list.
  15. aens

    2203 was worth the wait

    I’ve suddenly lost interest in all the other amps after the 2203 was released. Feels like home to me.
  16. aens

    Gibson's $1,000 humbuckers

    I’ve paid 85 € for custom made pickups made exactly to my given specs. Keep your pickups Gibson.
  17. aens

    Microsoft Authenticator App

    I just quit working for a client that used Microsoft One Drive. One Drive web browser based Excel crashed my browser 99 % of the time, and I have a M1 MacBook Pro. Also had to log in with the Authenticator app to gain access. What a relief I don't have to work with that anymore.
  18. aens

    FM9 Firmware Version 6.00 public beta (1)

    Aaaahhhhhhh I’m really close to immediately end my vacation with full sun (+22 C) to go back to the frozen hell (-20 C) I came from just to get this firmware loaded. Only 4 more days, lord give me strength…
  19. aens

    Airport etiquette when meeting people coming in on a flight?

    Just greet her as you normally would in a public place. If handshake is your thing, go for it. If the person is a close one, hug. We travel quite a lot with my fiancée, so IIRC it's been maybe 5 years since one of us was waiting at the airport when the other arrived. Our smart home does a beep...
  20. aens

    The Tone Scientist - my YouTube channel about Fractal (and modelers in general)

    Great videos! Subscribed. I particularly enjoyed the Gilmour series. I only know maybe 10 words in Italian but it certainly does not bother me especially when the translations are available if needed. It's actually refreshing to watch videos in another language. Keep it coming!
  21. aens

    AFIII What do you think about this sound?

    Beautiful tone and playing!
  22. aens

    Axe-Fx III Firmware 24.04 Release

    I know, just trying to figure out which delay type is most true to my pedal and was confused because I wasn’t sure what the Vintage Digital Delay actually was. My DDL is really close with Bit Reduction set to 13 and high cut set to 5kHz, no matter if the bit depth is right or not.
  23. aens

    Axe-Fx III Firmware 24.04 Release

    I guess the Vintage Digital Delay is modeled after 70’s digital delay architecure. At least my Ibanez DDL (8-bit) does not degrade as much as the model does, but that’s made around 1985, which is 14 years after the first digital delay units are created. Found this sound sample of a mid 70’s...
  24. aens

    FM9 Firmware Version 5.01

    Don’t worry, we can totally test it as well!
  25. aens

    Axe-Fx III Firmware 24.04 Release

    Thanks for checking this out. I think at least the Vintage Digital Delay is worth taking a look at in just in case it’s not working properly, unless the bit depth is already set lower internally (I doubt it).
  26. aens

    Axe-Fx III Firmware 24.04 Release

    Is that so? It’s then possible this might have been changed at some point. Or in the latest release? Not sure if I have reseted my delay block for 1-2 years, so that might explain it. I’m pretty sure the last time I checked the repeats were really degraded after 13. Thanks for checking out, not...
  27. aens

    Axe-Fx III Firmware 24.04 Release

    But the manual says the bitrate is set lower with the Vintage Digital Delay type. IIRC setting it to above 13 makes it kind of unusable already. 24-13=11. That can’t be right.
  28. aens

    Axe-Fx III Firmware 24.04 Release

    Quick question about the Vintage Digital Delay: manual says the bitrate is set lower with this type (16 bit maybe?). If so, setting the Bit Reduction to 8 it becomes 8 bit? Right? EDIT: figured out it should be 12 bit by default EDIT2: IIRC the Bit Reduction goes up to 24. So 12/24 *8 = 4 bits...
  29. aens

    Brit 800 2204 vs 2203 thoughts

    Sent you a PM about this 🙂 Vintage digital delay (especially 8-bit like the Ibanez DDL) kind of makes the 2203 sound even more grittier and nasty with enough master volume. I guess analog as well. Have the master too low and the delay just sounds like a bright delay that’s in your way most of...
  30. aens

    Brit 800 2204 vs 2203 thoughts

    That flanger IS special!! And well... I've been zooming in low quality Youtube videos for years and spending stupid amounts of money on completely wrong purchases. Gladly the original board was finally found almost 2 years ago laying in some guy's garage and those pedals were 100 % confirmed...
  31. aens

    Brit 800 2204 vs 2203 thoughts

    Small Stone (V2) with 2203 is IMHO the best phaser sound one can ever wish for. The re-issue just blows. Also that DOD Performer flanger is just pure magic as no other flanger I've played produces a feedback like it. Too bad there are not many around to stock up. Also TS has been my go to drive...
  32. aens

    Brit 800 2204 vs 2203 thoughts

    @Churchhill @LiamH or anyone else in this thread: I’m gonna offer you the whole evening in a bar if we ever meet in person. Much appreciated. Prior to 2012 when I bought my first Fractal had only been playing with modern solid state Marshall’s. Was not impressed, after Fractal Marshall was all...
  33. aens

    Brit 800 2204 vs 2203 thoughts

    Just quickly chiming in to say this is already by far my favourite thread on these forums in the past 10+ years. I have to admit I can’t even read amp schematics well but what a goldmine this thread has been so far. Keep it coming 🫡 Could someone explain the sonic differences between cascaded...
  34. aens

    Brit 800 2204 vs 2203 thoughts

    Big thanks for the clarification and for paying attention to all these details. Thought the gain was higher in the 2203 model after the amp and speaker interaction update, but this explains it. Think I’ve missed a few updates since the 2203 model dropped so it’s hard to keep track. But who...
  35. aens

    New stage trends...

    Easier for your back, ears and wallet. What’s not to like? 🙂
  36. aens

    Simulating dying pre/power tubes?

    I’ve tried to replicate mismatched power tubes by adjusting the Power Tube Mismatch. Not sure what’s the difference between negative and positive values, but guessing negative values are pushing half of the power tubes less and vice versa. I’ve tried to replicate an amp running half of the power...
  37. aens

    Brit 800 2204 vs 2203 thoughts

    Exactly! And even with those you might have to consult a Marshall expert. Same thing with some pedals that have gone through multiple revisions (like 80’s-early 90’s Dunlop Crybaby as an example).
  38. aens

    Brit 800 2204 vs 2203 thoughts

    Thanks a lot Leon, I must’ve missed that. What a pain to buy Marshall amps from this era since you can’t be entirely sure what’s inside the chassis… Not in front of any of my Fractals for a few weeks, but this will most probably do the trick.
  39. aens

    Brit 800 2204 vs 2203 thoughts

    Just a quick note prior FW 24 I used to crank up treble, presence and master volume with the new 2203 and 2204 models, but the improvements in speaker compression and amp interaction enabled me to lower these down. Also I’m able to cut down gain for about 0.5 with the latest update. I’m pretty...
  40. aens

    Brit 800 2204 vs 2203 thoughts

    I stumbled upon this post from @York Audio about matching a ’77 JMP: https://forum.fractalaudio.com/threads/axe-fx-iii-firmware-24-00-public-beta-1.200279/post-2498047 There is a clip as well that I can’t link here. I’m pretty confident we don’t need another late 70’s or early 80’s JCM or...
  41. aens

    Axe-Fx III Firmware 24.03 Release

    Just tried the new firmware. I am floored how good it is now. I was struggling with some upper frequencies not being sharp enough in my Marshall preset and I felt like there was some upper high frequencies lacking with the 23 firmware. With the latest firmware I’m able to cut down gain, treble...
  42. aens

    Brit 800 2204 vs 2203 thoughts

    That’s a great match for a 2203 JCM. I have the 1960B with 16 ohm G12T75’s. Not a popular one to use with modelers it seems. I’ve been searching for 8 ohm elements but they seem to be impossible to find.
  43. aens

    Brit 800 2204 vs 2203 thoughts

    That’s actually a genius way to compare them which I’ve never thought of. IIRC you said you’ve played with Fractal for only several weeks or months in another thread? Impressive. If one would like to ”upgrade” any 50 W Marshall (let’s say prior to 90’s) would raising the negative feedback get...
  44. aens

    Brit 800 2204 vs 2203 thoughts

    Fellow 80’s Marshall heavy user 🫡 Thanks for sharing the cool story. The reason for messing around with some many of these tiny details (like guitar cables, meh, I know) is that I’m trying to recreate a certain sound made with exactly this amp (’77 2203 but it’s supposed to be same circuit) and...
  45. aens

    Axe-Fx III Firmware 24.03 Release

    I feel like I also have to chime in to give Cliff and Fractal a massive thank you for all the hard work. Big shoutout to all the people that have been involved in the process of making FAS to be the best company in this market. For 11 years already I still feel like FAS has by far the best...
  46. aens

    Brit 800 2204 vs 2203 thoughts

    Changed to 2203 as well. It’s a tad more dynamic and smoother. With dynamic I mean you can go from crystal cleans to a distorted sound with guitar volume and picking dynamics. When picking lightly the sound doesn’t have this distorted quality compared to many other Marshall amps. Like with the...
  47. aens

    Dino Cazares playing Fractal now?

    That makes a lot of sense. One does not simply change rig middle of tour, unless there’s an impassable problem. Touring is exhausting and the last thing you want to do right after is mess with a new rig from scratch, unless you feel like something was not right the last time. Depends on the...
  48. aens

    Modeling Questions

    Those dings do make a difference especially when you mic your amps like this: Jokes aside my previous JCM amp did make a sound you can mic if you use a loadbox, turn up the master volume high enough and mute the power amp after loadbox. Did not trace the sound properly but IIRC it was maybe...
  49. aens

    Which has the biggest impact on tone from a Les Paul?

    In my personal experience: 1. pickups 2. electronics and wiring 2. bridge: only if it's really different in design and materials compared to the stock ToM bridge, I'm using few special brass bridges on my Les Pauls and they make do the guitar sound snappier, especially if you have to mount them...
  50. aens

    Modeling Questions

  51. aens

    Most desired tones that you don't already have?

    That’s a cool tone. Supposedly a Hiwatt head to a Marshall 1982 cabinet, Echoplex with short delay time and 4-5 repeats + loads of volume and hall reverb. No idea how much the PAF pickups are part of the sound though.
  52. aens

    Adventures in Accuracy

    Graphs like these help me sleep at nights without having to crave about getting another modeler or new gear. Easier on the wallet when you known you already have the best gear available. Also my ears have improved a lot when you know what to listen for in amp modeling. Arguing about competetive...
  53. aens

    Adventures in Accuracy

    I understand your point of view and am aware that the TMP’s speaker impedance problem with non-stock IR’s. That’s a design flaw on Fender’s end and I hope they’ll get it fixed if they want to join the modeler competition for real. Why would you have to disable power amp simulation with Fractal...
  54. aens

    Adventures in Accuracy

    No offence taken at all. If you use the same IR between different units, then the comparison is about the amp modeling being accurate or not. This includes the interaction between the amp model and the speaker. If you use two different products, same amp model but use a different IR, you are...
  55. aens

    Adventures in Accuracy

    Just a friendly reminder that this thread is about authenticity and accuracy 🙂 If you are comparing two amp modelers with two different IR’s, you are mostly comparing two miced up sounds and trying to decide which miced up sound you like better.
  56. aens

    Adventures in Accuracy

    I disagree with you, especially when some manufacturers use EQ’d or smoothened IRs. If you throw a different IR to a modeler that doesn’t have authentic amp modeling it should not sound that good. By comparing two products with different IR’s you are just comparing two sounds together, not two...
  57. aens

    Why I chose this modeler....

    Then again almost 40 % of those people recommended getting a Fractal device (AXE FX III/FM9) which is not bad at all. That was a great video!
  58. aens

    Adventures in Accuracy

    Did you export the Fender IR’s to Fractal and compare them? If you didn’t, it’s not a fair comparison either. I’m not trying to say TMP models can’t sound good and sure they can. The thing is TMP models are not yet accurate and have been ”sweetened” to sound good with other techniques (like the...
  59. aens

    Marshall Major - build from something else?

    Cliff bought a Major a few years ago IIRC. Not sure why it didn’t end up as an amp model.
  60. aens

    Modeling Questions

    @James Freeman @FractalAudio could you do a guitar amp podcast together? I’m learning so much new stuff here. This is like Einstein and Tesla having a nice little chat about guitar amps.
  61. aens

    Axe-Fx III Firmware 23.03 Beta #1

    That’s a nice tip. I mostly set drive at 5-6 and BMTP somewhat at noon. Setting master over 5 with drive at noon, the amp just gets too flubby and oversaturated. I’m more into classic rock sounds and try to set the amp to be dynamic. Picking softly and lowering guitar volume gets you into clean...
  62. aens

    Adventures in Accuracy

    Haha yeah that was funny! On YouTube scale it’s 100% accurate.
  63. aens

    Adventures in Accuracy

    How close is the new 2203? I’ve compared my 2203 JCM and JMP amps with several firmwares over the years. My JCM was a different revision, but I got it really close and that was back in 2018. My JMP 2203 is somewhat indistinguishable from the Brit 800 (2204) with a few tweaks. Just curious how...
  64. aens

    Axe-Fx III Firmware 23.03 Beta #1

    Thank you so much @2112 for putting these videos up yet again. Can’t get to my III atm so this video will do. And thank you @FractalAudio for adding the 2203 and for such an amazing customer service. Had a friend trying out the III Marshall models for the first time and he was blown away. Also...
  65. aens

    Cab-Lab 4 Wish List

    Give us several Marshall cabinets from different eras made before the 90’s and consider it done.
  66. aens

    Adventures in Accuracy

    Same here. Funny thing was I even read your post while watching tv and just kept reading the thread. Shortly after I also realized to zoom in the pictures. Oh I see, so this is what all of you are talking about…
  67. aens

    I’m never using a 3rd party IR ever again. Ever. For anything.

    Same for me, I will never, ever use a 3rd part… Oh, is that a new late 80’s Marshall JCM impulse pack? Pretty sure I already have 5 of these. I surely don’t need it but adds to cart.
  68. aens

    Don't Work on Amp Models When You're Overworked and Tired

    So how does that new Marshall sound? 😉
  69. aens

    The Edge/U2 and UAFX pedals

    It’s been mentioned already but also worth pointing out that Edge is most probably comparing the UAD models to Axe FX II. Some of the models can sound better with never amp modeling. No idea how much work has gone to his Axe FX II presets, but using 3 different pedal size amp models that ’sound...
  70. aens

    Fuzz Pedals

    Humbuckers. I have vintage Gibson Dirty Fingers on bridge and T-Top on neck. Neck pickup is splittable to single coil, and I remember it being quite nasty. I had to change the input to 1M+Cap since the high end was not there, but that’s also authentic to the sound I was trying to replicate. The...
  71. aens

    Fuzz Pedals

    Posting this here since it can be left unnoticed in the AFX II Muff thread: I finally found a realistic setting for 80’s Big Muff Deluxe (one of the holy grail muffs), which I matched to a real recording. It cleans up so good with volume knob: 1-2 clean, 3-6 fuzzy overdrive, 7-10 ripping fuzz...
  72. aens

    Fractal Audio DRIVE models: Pi Fuzz (based on Electro-Harmonix Big Muff Pi)

    I finally found a realistic setting for 80’s Big Muff Deluxe (one of the holy grail muffs), which I matched to a real recording. It cleans up so good with volume knob: 1-2 clean, 3-6 fuzzy overdrive, 7-10 ripping fuzz. I was actually chasing the fuzzy overdrive sound, and it turned out other...
  73. aens

    Free IR: Marshall amp with a legendary mic placement - Betcha Dyna-cab can’t do this.

    Amazing in the room sound!
  74. aens

    What Dyna-Cab Models Would You Like to See Added?

    Marshall JCM800 cab with G12T75’s is pretty much everything I use these days. Not a huge fan of the modern one, although they sound decent as well. But IT IS a totally different beast. Also: Late 60’s Marshall cab with G12-M20’s, M25’s + H30 55hz’s would be amazing. Marshall 8x10 cabinet would...
  75. aens

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    But it requires two IR’s to create phase problems ☹️
  76. aens

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    We now need a feature in cab block to add more phasing. The parameter is called ”Add phase problems” and description says ”if you want to sound like ****”.
  77. aens

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    I already posted this to another thread but: the legacy cab workflow suddenly feels so impractical now. The only reason to not use Dyna-Cab for me would be because there is not one for a particular speaker or mic I’d want to use. Has the lack of being able to move the mic vertically been...
  78. aens

    Quick Overview of Dyna-Cabs

    What a game changer! The old fashion cabinet IR method already feels so impractical, almost like it was created in the stone age. Dyna-cab just makes so much more sense in every way. Now if you feel like putting a dynamic mic dead center to the speaker is your preferred way to go, just go for it.
  79. aens

    Wish Bad Monkey OD

    FAS Monkeypox OD
  80. aens

    Axe-FX III with Real cab vs. the Real thing

    True, master at 4 the 2203/2204 really starts to open up. I’ve learned that using the Fractal models. After 4-5 your sound will just get more unfocused. I recently moved to a new rehearsal place and it’s somewhat smaller (too small for a 2203) compared to the last one. Amp is kind of new for me...
  81. aens

    Axe-FX III with Real cab vs. the Real thing

    This is exactly what happened to me last week when I was comparing my Fractal to a real amp. I thought my Matrix was somewhat on par on volume with my 2203 JMP. Matrix got to 105.5 dB (LAeq, full volume) which I thought was pretty loud, until I tried the real amp and… 2203 was at 118 dB (LAeq...
  82. aens

    Fractal user reviews TONEX Pedal

    Blegh, that's only 40 ms (HiRes). Will skip this one then :(
  83. aens

    Thanks Austin Buddy, you fu.......

    I've learned the most when researching other people's work for what it comes to guitar sounds. If you really like a particular guitar sound, try to get as close as you possibly can. You will learn a lot and find interesting things on the way. Most of the people have told me to stop fooling...
  84. aens

    Fractal user reviews TONEX Pedal

    Anyone tried the IR loader yet? What are the specs for that? Max length for IR? I’m curious about that. Considering this product for that alone. Would be amazing to have Room Ambient IR’s if longer impulses are possible.
  85. aens

    What albums calm you?

  86. aens

    -14

    IMO at -30 C you really start to feel the coldness. Even with proper winter gear. It was -10 C last night and I walked home with my jacket open wearing a t-shirt under it.
  87. aens

    FM3 for REAL Jazz

    I don’t know how to play jazz or have the slightest idea how to craft a jazz tone, but this tone defines the perfect ”jazz tone” for me. YMMV. EDIT: OMG I just noticed this guy looks exactly like me. Wtf 😂😂😂
  88. aens

    A good alternative To Matrix Amps?

    If one has only tried the budget stuff and already calls it perfect, that’s where the problem lies. People like him are trying to prove they know better and try to get away with cheap stuff. Now it works up to a certain point. Your hearing and taste should evolve along the way and you’ll use the...
  89. aens

    A good alternative To Matrix Amps?

    I know a guy who uses a Behringer class D power amp with his modeler. He argues that it's superior compared to other power amps especially at that price point as he says it's completely "neutral", "perfect sounding" and "not hyped like Matrix products". Judging from a recent A-B test he did I...
  90. aens

    Wish Fixed/Reset Tap Tempo

    Of course, but navigating through the FC to recall the current preset and getting back to my default FC view (Perform) in the middle of a song for just one parameter change is not ideal.
  91. aens

    Wish Fixed/Reset Tap Tempo

    Here’s an idea how to expand the tap tempo feature even more. There can be two ways and both would be assignable for the FC controller or FM3/9 switches. 1) reset tempo value to the one that has been saved in particular preset (I’d call it the default preset tempo) 2) assign a FC or FM switch...
  92. aens

    Do you still need 4x12 cabinets onstage??- Rosanna (TOTO) final guitar solo

    Newest iPhone microphones tend to bring the drums WAY out front. If you point your iPhone towards the drums, it’ll be all you will be hearing.
  93. aens

    What Prompted You To Buy A Fractal?

    1. Was not satisfied with my current amp, pedals and sound. That time I did not own a lot of gear and didn’t have the money or interest to try out every single piece of gear, so I was looking for a long time investment. I already tried things like Amplitube with a cheap USB device but the...
  94. aens

    How Many Amps Have You Owned, & Can You Remember Them All?

    Kustom Solo 16R combo - not bad for first amp at all. Did not own any real mics back then so I miced it up with a headset. Not sure if I sold the amp or gave it away. Marshall MG100DFX combo - was so excited to have my first Marshall. And a 100 watter, wow! Ended up hating it and still do. The...
  95. aens

    Any EBMM owners?

    Will be an EBMM owner for the very first time hopefully next week. Just bought a 2007 JP6 Mystic Dream. Patience is not my best virtue. No piezo in it, but I think I’ll survive. It’s a really nice toy but I don’t think I’ll end up using it that much.
  96. aens

    Marshall JCM 900's and 2000's - Why are these never emulated in modelers?

    That’s nothing new I’m afraid. Mikael uses AX8 for effects only. I recall no changes to guitars in their 2022 tech rider.
  97. aens

    Welcome MATT BELLAMY of MUSE to the Fractal Audio Artist Roster

    OMG!!!!!!!!
  98. aens

    BRAD WHITFORD and TOM HAMILTON of AEROSMITH : Fractal Audio Artists!

    Great news! Rolling Stones next? 😉 Also congratulations @austinbuddy! That’s huge.
  99. aens

    Lots of buzz last night…

    Humbucker or single coil pickups? How high is your FM9 CPU usage? How much gain are you using in your amp or preset? Have you tweaked your sound with full volume before show? Are you using a wireless system with your guitar? Everything okay with that (battery, radio frequency)? Active or passive...
  100. aens

    Good headphones for the FM9?

    https://valco.io/products/vmk25-wireless-anc-headphones No competition in this price range.
Back
Top Bottom