Search results for query: *

  1. J

    Embedded hardware power amp

    Is there any plan to make a Axe-FX III with an integrated SS power amp (like the Kemper)? So....3U instead of 4U in a rack.
  2. J

    Axe-Fx II soundcard USB output

    Hello, Another problem regarding my current setup. I'm using OUT2 as monitoring output (i.e. those outputs are connected to a pair of atomic passive wedges). OUT1 goes FOH. Problem is now that I'm trying to expand my sounds using VST instruments running on a laptop connected to Axe-FX via USB...
  3. J

    Midi Thru + External device sync (LF+) + Midi guitar

    Hi there, This is the setup I'm currently running with: 1) Axe-FX II Mark II, and LF+12+ controller connected via a 7pin midi cable 2) MacOS + Mainstage connected to the Midi through Axe-fx II port using a simple midi-to-usb cable (more on that later) 3) Tripleplay on my guitar. This is just...
  4. J

    Bug? [Bug] Axe-Edit + Midi beat clock

    Hi there, Maybe it's not a bug, it's a feature, but it's there. When noodling at home with my Axe (to create patches, tune sounds, etc) I find easier to bounce from one preset to another using my LF+12+ which is connected via MIDI to the Axe-Fx II. Problem is that with this new feature from...
  5. J

    AXE-FX DI Farting?

    Hi all, I'm recording some guitar tracks for an album of a friend of mine, and as usual I'm tracking both DI and wet signal in order to re-amp later if necessary. My input monitor is "tickling the reds" as per instructions. All was great up to the moment I decided to re-amp. I listened back to...
  6. J

    Wish VU Meters on Axe-Edit

    Hi all, It would be great to have the fantastic VU meters shown on the AXE panel on the Axe-Edit interface, this way one could do preset leveling with the axe-fx meters without having to step toward the axe while in the studio or while tweaking from axe-edit. Thanks!
  7. J

    Mesa Boogie 2x12 C90 Open Back resonant frequency

    Hello, Any suggestion on how to setup the LF and HF resonance (freq, Q, amount) for a 2x12 Open Back with C90 speakers? I'm using some IRs and it's a bit difficult dialing it by ear :-) Thanks J
  8. J

    2x12 IR recipe using redwires Halfback Mesa boogie IRs

    Anyone made something out of the 2x12 clean IRs from RedWirez? I'd like to have some reference points for cab lab!! Thanks :D
  9. J

    The Forgotten Prisoners - The Passage

    Some may remember I posted a promo video for my band first album. We just released the first single and I would like to share it with you. All guitars and basses were recorded with AXE-FXII on FW 14.00 Enjoy
  10. J

    2x12 IR recipe using redwires Halfback Mesa boogie IRs

    Has anyone made some mixIr2/Cablab recipe for the above IRs? Specifically, Halfback Bottom - C90s Halfback Bottom - EV12Ls Halfback Top Closed - C90s Halfback Top Closed - EV12Ls Halfback Top Open - C90s Halfback Top Open - EV12Ls :D:D:D:D:D
  11. J

    John petrucci straight in P.A.

    Hello, I recently went to a dream theater concert here in Italy.Amazing show. I've noticed two things: the cabs behind John were fake, not mic'ed. So he is going straight to P.A.. His tone also comes out from his metal footstands which are MESA custom monitors - to obtain feedback, he had...
  12. J

    The Forgotten Prisoners - 1st studio album!

    Hello there, My band, TFP, is about to release its first studio album. We prepared a promotional video at this URL: All guitars and bass have been recorded using Axe-Fx II on FW 14.00 8) Like our page on Facebook and share if you wish :-) https://www.facebook.com/TheForgottenPrisoners...
  13. J

    Left column too short!

    Hello, Does anybody else have a little problem in reading IR names in the left columns? I'm working with the RedWirez BigBox series and I always get the IR name cut. Also, neither the window nor the column are resizable so I end up forgetting which IR i put in the slot :numbness: Next...
  14. J

    Check for phase cancellation

    Hello, Maybe I've got some problems with a high gain patch. it sounds good, but every now and then I hear something not right in the low end. So I've made some screenshots with izotope EQ to check what's wrong. I'm on fw 18.07 now. It's a live high-gain patch with a recto2 modern, single...
  15. J

    Low cut freq in TONE amp page

    Hello, just a quick question. I used to put a filter block cutting below 700hz for high-gain input (or a TS9 boost). I've studied the amp manual and it seems that the Low cut freq in the tone page of the amp block is roughly the same thing (i.e. cutting lows before preamp input). But I feel...
  16. J

    Help with my Recto Tone!!!!

    Please, I need help regarding the current FW 18.01! I reset ALL Axe-fx II to factory defaults just to be sure (I had 14.00 before! yikes!). In the attached soundcloud clip, I play some basic rhythm. I like very much the sound. BUT, when i switch to some single note lead, as in the clip, the...
  17. J

    Stereo Ultra-res VS Mono + Small delay

    Hello there, A configuration advice request. What's the point in running a stereo ultrares CAB if I could run one mono ultrares + a small (9ms) delay block after the CAB? What are the pros and cons of the two solutions? I'm trying to build my patches as less CPU-costly as possible...
  18. J

    Load another AMP at runtime with sysexes

    Hello, While i'm waiting for firmware 18 i'm writing down some ideas I've come up with for my patches. I've stumbled upon this wiki page MIDI SysEx - Axe-Fx II Wiki Well, from what I found for the AXEFX I, it was possibile to change the amp type in the amp block at runtype with a sysex...
  19. J

    CAB Hi and Low cut vs PEQ shelving

    Hello, I have a question regarding the difference between placing a low-cut and hi-cut in the cab block, to replicate the actual response of a cabinet, vs placing a PEQ after the CAB block. I've read through all the forum and wiki, but i'm not quite sure which one to use. I'm aware of the...
  20. J

    Midi clock OUT

    Hello, I'm trying to use my axe-fx 2 as a midi clock source for my whole band. I'm the only guy that can do the tap tempo, so.... But i'm noticing that the axe-fx seems not to "write" the clock out on the midi out/thru port. I've tried setting midi thru on but no results. Can you help...
  21. J

    So, about to record bass guitars...

    Hello! We're about to record the bass linea for our first album and we're going to blend di tones from an avalon 737 and from axe fx . My bassist loves the gallien krueger that chancellor from tool uses, can you point me to the one amp SIM that resembles it the most? Thanks!! Sent from my...
  22. J

    Mic preamp in fx loop for recording

    Hello, We are about to record our first album and we're going to do both the guitars and basses with the axe 2! So i will be using ultra res and probably multiband comp block as for fremen presets. I was wondering though: i have an UAD la610 that we will be using for vocals. To complete a...
  23. J

    Rectifier sound test

    Please give me an opinion on this sound. I'm still struggling with finding my perfect rhythm sound and I love the recto stuff for crunch. I play the same riff with a recto orange channel in modern, then in vintage mode. I find myself more satisfied with the vintage mode sound. Maybe too much gain?
  24. J

    Mesa Boogie Road King channel 1

    Hello, Which amp preset should be used to emulate the Road King channel 1 on CLEAN mode? I had the v2 version and, on channel 1, it has the Lonestar clean channel built in. The closest I've come up with is the USA CLEAN but it's the mark IV clean. Thanks
  25. J

    Clarification on Axe-FX II -> Matrix Gt poweramp connection

    Hello, After having ordered from vafamsound my custom axe panel, I'm almost ready to go FRFR (output1) + power amp. I will connect my Matrix power amp in my rack to the Axe-FX FX-loop (output 2) sockets. I have some spare Lyric HG (stereo cables) with G&H connectors, really high quality...
  26. J

    Presence settings and Hi-cut on recto

    Hello, A quick question regarding the presence knob: is the range on axe-edit matched with the real amp? I found some information, I think on the wiki, telling me that presence = 0 on the real recto is presence = noon on axe-fx. What about the high-cut? is it the same? Thanks j
  27. J

    Tone matching minus CAB

    hello there, While I'm pretty amused with the tone matching sounds I can achieve with USB input, I was wondering...Is it currently possible to use them live in a cabinet and not in a PA? I try to elaborate: When you tonematch a sound, you can export it to a CAB IR. Knowing an approximate...
  28. J

    Slowly raise volume when preset is engaged

    Hello all! I'm enjoying my axe-fx 2 11fw! Really nice and open :-) I'm almost done creating my presets, but I have a particular need for a solo preset i was dialing in. It's a preset when the first note should get in with a WAH sound and its volume should come in slowly. Normally I would...
  29. J

    Liquid Foot Editor under linux with WINE Howto!

    Hello all, This is my first post - I am a linux enthusiast since 1995, so when I bought my new LF+ I was worried when I saw that its editor didn't work under linux. So I made some research and discovered that the USB chipset is based on FTDI usb-to-serial bus. Then with some work I had the...
  30. J

    Switching to Liquid foot 12+

    Hello, I'm sorry to say this controller doesn't do for me. I have a rack rig with an eclipse, a d-two as multi-effects units and some other pedal stuff, a rack wah and a dmc system mix plus. The lack of an editor, no triggers between external switches and IA switches...No IA available but...
  31. J

    Wish MFC-101 Open source firmware! :-)

    Is there any chance for us to have the MFC-101 with an OS firmware with some kind of license limitation (i.e. no distribution etc, uploading the custom firmware voids the warranty etc) so that we could develop our personal customization for MFC-101 features? It should not contain any proprietary...
  32. J

    MFC-101 without Axe-Fx led status

    Hello all! I recently bought my new MFC-101 and I started programming to use with a big rack with, amongst the other things, an eclipse and a d-two. I did not buy the axe-fx because I already had a Mesa boogie road king and didn't want to sell it. Actually, I'd like the IA switches to show...
Back
Top Bottom