Search results for query: *

  • Users: caseygree
  • Content: Threads
  • Order by date
  1. C

    Can’t hear Axe II through studio monitors

    Here’s what I’m trying to do: Run AxeII audio through USB to Mac Run Mac USB out to Roland Quad capture for monitoring When I do this, I can hear everything through my monitors (YouTube, iTunes and even RECORDED AxeII sound) but NOT live playing for monitoring am I missing something super...
  2. C

    Question: S-PDIF recording with power amp and cab setup

    Heya, this might be a dumb question, but: - I'm running a power amp and cab setup - power amp and cab sim are OFF - I want to record loops from the AX8 to garage band When I run from the AX8 into my computer using S-PDIF, does the DAW capture cab-less audio? Like, will my cabs even factor...
  3. C

    AX8 effects only in loop - excessive noise

    howdy, For one of my setups, I use the AX8 in the effects loop of my Budda SD45. - when using regular pedals in loop of amp, it is dead quiet - as soon as I pop the AX8 in the loop of the amp, I hear a ton of 60 cycle hum. - is there any tricks for reducing this? - signal chain: guitar to...
  4. C

    FS QSC K8 - pair, mint condition

    Howdy, I have a pair of QSC K8 PA speakers for sale. These were church-owned before I got them, and have only been used as studio monitors in my possession. Perfect condition and sound great. Super light weight and they project really well. I bought them to use with my Fractal AxeFX and AX8...
  5. C

    What's the easiest way to add the same effect to every preset?

    is their one? I'm auditioning a preset pack (Naked amps), and would like to add a looper and reverb to every preset.
  6. C

    QSC K series users unite: tips, tricks, etc.

    Howdy, just bought a pair of QSC K8 (1000 watt versions). So far, I'm loving them, in part due to some tips I've already been able to glean from the forum. Thought it would be good (since many people use them) to start an owners thread for people to share their tips, tricks and any other...
  7. C

    Three amps - wet/dry/wet setup: is FX8 right for me?

    howdy, I have a JCM800, a Budda Superdrive and a Naylor Electra-verb. I'd like to run all three in a wet/dry/wet setup, likely with the Budda as the dry amp. Is this possible to route with the FX8? AX8? Or do I need a stereo power amp in there somewhere? I'd likely be using a mix of...
  8. C

    Volume "jumps" as note decays

    Howdy I'm running the Ax8 in the effects loop of a Naylor Electraverb 60. As notes decay, I'm getting a subtle, but very audible "jump" in signal. Though, the LED meter does not register it. It sounds a bit like when a noise gate is dealing with high-gain + RF interference. What I've...
  9. C

    Delay X/Y: Y has no effect

    Howdy, I'm running a stereo BBD as Delay X, and want to add an alternate delay in Y slot. But when I switch to Y, I can't get any effect (no matter what type I choose). Is this a limitation when using a stereo delay in X? Am I missing something obvious? Thanks, case
  10. C

    Naylor tone match?

    howdy I've been trying to replicate my Naylor Electraverb 38 combo amp. I've found a ton of tones I've liked in the process -- but nothing that sounds quite like it. So far I've tried - friedman BE/HBE - JCM800 models - dirty Shirley - ods hrm - Buttery - VHT Deliverance model - Splawn...
  11. C

    FX loop routing: using axe 8 effects loop AND amps effects loop

    so here's what I want to do: - run my Hughes and Kettner replex delay in the effects loop of my Axe 8 - AND then run the Axe 8 through the effects loop of my Naylor amp Here's what I've tried: - amp send to Axe In 1, Axe Out 2 (L) to Amp return - axe output 2 (R) into Replex input, output...
  12. C

    Atomic Reactor active cab: can i run a tube amp through it?

    Heya, Quick question: can I run an active atomic reactor as a traditional passive 1x12 with a tube amp safely? I want to run my Budda SuperDrive 18 through it for fun - if possible. Anyone use it like that, and if so, how does it sound? Thanks Case
  13. C

    Calling all Budda Superdrive 45/80 owners

    Howdy I'm close to pulling the trigger on an early Budda SuperDrive 45 in an attempt to find some tones I haven't quite been able to nail. Or, at least I think I can't. Before i take the plunge on my first tube amp in years, does anyone out there have a solid preset, or better yet, a...
  14. C

    FX Loop questions: running external delay pedal

    Howdy, I am absolutely in love my Hughes & Kettner Replex delay pedal. So much so, that I'm using it with the Axe FX 2 now. My question: I'm running it in the FX Loop Block (in between the amp block and cab block), and I seem to be overloading the pedal. (The pedal has an LED that lets...
  15. C

    Looper question: playback of layered loop plays out-of-time

    Howdy, quick looper question: - If I record a backing loop (loop 1) - Layer a lead line over it (loop 2) - and LEAVE it playing, it plays fine - BUT, if I stop playback, and then restart it, the layered loop (loop 2) goes all crazy and out of time. It will get progressively more weird...
  16. C

    Need opinion: KRK VXT 6 studio monitors w/Axe FX II

    Howdy, have been looking for a pair of descent studio monitors for general playback purposes for awhile and would also love a pair that work decently with the Axe FX II for jam room purposes. I go poweramp/cab now, and will continue to do that mostly I think, but would like to experiment...
  17. C

    Need opinion: KRK VXT 6 studio monitors w/Axe FX II

    Moved: Need opinion: KRK VXT 6 studio monitors w/Axe FX II Howdy, have been looking for a pair of descent studio monitors for general playback purposes for awhile and would also love a pair that work decently with the Axe FX II for jam room purposes. I go poweramp/cab now, and will...
  18. C

    ART X-15: control questions

    Howdy, Found one of these locally for cheap and had a question: will I be able to control the looper functions with this controller when it's in "effects" mode? (stomp box mode basically). Thanks, Case
  19. C

    HELP: Using Randall 4-button midi switch to control looper - is it possible?

    Howdy, I've been in Axe 2 headache land trying to get my simpler 4-button Randall midi footswitch (for my Egnater M4 preamp) to control the looper functionality. Conclusion is that it's not possible - but wanted to verify for sure. I assumed I could change the CC# of the looper to match...
  20. C

    Does Tone Match function in Axe/Power amp/Cab setup?

    So, assuming Cab sims are disabled as is recommended in power amp/cab setup, will the TM block still function? If so, are there any extra steps one has to follow to get it to sound/perform correctly? My setup is Axe FX II/VHT 2|50|2/Mesa 2x12 thanks, case
  21. C

    Other places for presets?

    Howdy, Was surprised that this forum area only dated back to March of last year. Is there a preset "archive" somewhere that I'm missing? I figured the Standard/Ultra presets would be pretty deep. thanks, Case
  22. C

    Using Boss RC2 looper in Axe Standard effects loop: setting levels/layout

    Howdy, got the Axe Standard rocking, and am now trying to get my looping capabilities added in. My signal: Guitar>>Front input>>Back output (left)>>Carvin DCM1000 input>>Carvin ouptut>>Mesa 2x12 Input 2>>RC2 output>>RC2 input>>Axe output 2 My layout is super simple...
  23. C

    Noob question about cab sims and patches

    Heya, When you bypass the global cabinet sims, does that automatically bypass all your patch/preset cabinet settings? Or are they completely unrelated settings? Thanks Case
  24. C

    Help:Connecting Axe FX Standard to older iMac, M audio Fast Track Ultra (osx 10.4.11)

    Howdy, Got Axe Edit downloaded and open. Got the new firmware downloaded. But can't get my computer to recognize the Axe FX. I'm using running midi in/out from the M Audio to midi in/out on the Axe. Is there a setting on the Axe I need to change? Feel free to give me a shout or...
  25. C

    My Standard arrives today. Where should I start?

    Hey guys, this is my 2nd of what's sure to become a host of annoying help questions about the Axe FX Standard. Anyways, it arrives today. I don't have a power amp yet, nor do I have any powered speakers. Should be getting a VHT 2/90/2 this weekend. In the meantime, what methods can I...
Back
Top Bottom