Search results for query: *

  1. Kruegmeister

    Waitlist Email

    Yes I got it, just sayin that I had to "look" for the problem & not use a noise gate to even hear it... its overblown. Got it.
  2. Kruegmeister

    Waitlist Email

    I Don't agree with the guy your talking about either. Not sure which chips they are short on??? Would be curious to know if its the SharcDSP or other items??? As far as the QC the PowerSupply "Noise" is only an issue if you "Only Plug in Guitar & Headphones" & 2 "are too stupid to set a NoiseGate"
  3. Kruegmeister

    KLON Drive Settings

    Between Fractals right now. When I get my FM9 I'll A/B vs my Klon KTR Here's the settings I had, from someone's YouTube Channel
  4. Kruegmeister

    How does the the FM3 take pedals?

    Sorry I do not know anything about the Fishman Generally speaking a High Impedance input will not have ill effects on most things. The switchable impedance just makes it so it can emulate the load a fuzz would have on your guitar for instance.
  5. Kruegmeister

    How does the the FM3 take pedals?

    Yes, but a Wah or Fuzz Does Not, impedance is low & interacts with the Guitar Pickups... so I was really making the Point that he would want them out Front ideally to get an authentic Fuzz or Wah Loading of the Pickups... I never really noticed a difference personally, but also rarely use...
  6. Kruegmeister

    Waitlist Email

    No nothing yet...
  7. Kruegmeister

    Differences from AX8 (Ares? Quantum?) to FM9/Axe FX 3.

    The Difference is"Pentium" Intel couldn't trademark 486, so we got Pentium, Celeron... etc. 4.0 vs 16.0 its all progress, but now that there is names (Cygnus, Ares)... well now it Blooms & has feel, Chugs... etc... back when we only had 11.2 upgrade to 12.0 it wasn't "Game Changing" or "Night &...
  8. Kruegmeister

    Waitlist Email

    Joined 7am today 8/28
  9. Kruegmeister

    improvements on the pitch block/virtual capo latency over the FM3?

    Cannot Quote for some reason... I really hope this gets done. The FM3 has the same pending answer from Fractal for a looooong time. This is the reason my FC6 got replaced with a HXEffects... I waitlisted for a FM9 cause I'd like the added horsepower, but I'd like to not have the HXFX in the mix...
  10. Kruegmeister

    FM9 FAQ

    Is the VirtualCapo Equal to the AxeIII or to the FM3?
  11. Kruegmeister

    How does the the FM3 take pedals?

    FM3 does not have the Input Impedance Switching Circuit. Having your Wah & Fuzz out front would be proper as Fuzz & Wah usually have impedance that would load your guitar pickups authentically, but the Volume Pedal 1st may negate that effect...??? Also the Fuzz would not Load your Pickups unless...
  12. Kruegmeister

    Fatigue with the "I am hitting the CPU limits" on the FM3 talk???

    Nope, I'd pay more for an FC-12 with an AxeFXIII built in. Just want it all in one unit. I simply do not want a Rack Unit with a Rack Stand. I want the better Capo Block too. Here is my Solve Currently HXFX instead of FC6 Gives me the Poly Capo, running a mix of Scenes & MidiCC Stomps. FM3...
  13. Kruegmeister

    Is little to no feedback just the way it is with modelers?

    For me FRFR made the Feedback not correct & over-responsive in the HighEnd area of Feedback. This Trip Around for me with Modeling I found the Friedman ASC-10 which is not perfectly Flat... I get much better Feedback with the ASC-10
  14. Kruegmeister

    FM3 + HX Effects

    No I'm not... totally forgot about that, forgot I had some from when I ran my AxeFXII into a 5150 I'll have to shorten those up & try that as there is some noise when the loop is active. Thanks for the tip
  15. Kruegmeister

    FM3 + HX Effects

    I have the HXFX in the Out2 In2 Loop of the FM3. There is some slight additional Noise when this is Active, so I use my Mission SP1 to Bypass that Out2 In2 Loop to keep things more Quiet & Save A/D Conversions when Not Necessary. The HXFX makes a great Controller for the FM3. I run FOH giggin &...
  16. Kruegmeister

    FM3 + HX Effects

    So I did this. It works great & Frees up CPU as I use the PolyCapo from the HXFX which is better than the Currrent FM3 Virtual Capo (Not ported from AxeFX3 yet) I use the Switch on my Mission Wah Pedal to bypass the Out2/In2 Loop to minimize AtoD conversions when in Standard Tuning So I can...
  17. Kruegmeister

    Best budget FRFR for FM3

    Much of this is Subjective & varies by "Taste" as you can see from these 2 Opinions & my opinion is My Friedman ASC-10 is vastly superior to the QSC K10 & K12, RCF NX-12SMA that I still have, just relegated the QSCs to my Bass Player & Drummer for Vocal Monitors. I found FRFR to be terrible for...
  18. Kruegmeister

    FM3 + HX Effects

    I currently have an HX Stomp in my Out2/In2 Loop. I also have a FC6. Main purpose for me is the PolyCapo is way better than the FM3s Virtual Capo. But another added benefit is you can free up some CPU % Thanks to this thread I wonder if HXFX would be a better way to go for myself. I really like...
  19. Kruegmeister

    FM3 vs AXE-FX III-Main Differences?

    More than just CPU difference, it does not work as good. (Different Algorithm) They are working on fixing both issues, but the AxeFX III capo is allegedly excellent. For Cleans the FM3 one isn't good enough to be usable & the reason for the HXStomp in my FM3 Loop currently.
  20. Kruegmeister

    FM3 vs AXE-FX III-Main Differences?

    Virtual Capo in FM3 is vastly different than the AxeFX III
  21. Kruegmeister

    Multiple Presets For Multiple Guitars?? Yes or No?

    Filter or PEQ. Channel A for Strat, Channel B for Les Paul. Or Same idea but Bypassed for Les Paul on for Strat. AustinBuddy uses the Filter in many of his presets & scene 1-4 is for LesPaul & 5-8 for Strats.
  22. Kruegmeister

    FM3 CPU Performance Dismistified

    & Yet I hit 80ish% with something like this... what am I doing wrong... I feel am always choosing my Compromise which is an additional reason why my HX Stomp is in the Out2/In2 Loop for PolyCapo Duties.... outside of being better than the VirtualCapo & yes my Reverb is on Economy... CPU is not...
  23. Kruegmeister

    Fm3/Hx stomp/mc8

    Mono 1/4 inch cables. Use Output 2/ Input2 Put a Out2 & In2 in your FM3 preset. Bypassing In2 Block bypasses the HX Stomp I run Midi from my FM3 to the Stomp, I have a Midi Block at the Middle Top to normally select my Patch 99, but I also have Control Switches (CS1-CS6) to toggle individual...
  24. Kruegmeister

    HX Stomp as backup to FM3

    I am doing exactly this. Using the HX Stomp to Complement my FM3, it sits in the Out2->In2 Loop & I use it for its Virtual Capo mainly. My HX Stomp Preset 99 is Virtual Capo -> Pitch Shifter -> Klon -> SD-1 That one gets loaded for all of my FM3 patches. But I also have the HX Stomp loaded with...
  25. Kruegmeister

    First week with FM3 - What I hear on Youtube is just not true

    I still have my Rocktron Voodoo Valve Online... haven't fired it up in years tho...
  26. Kruegmeister

    Virtual Capo Parameters

    Line 6 has Fastest, Fast, Stable X-Stable On the Stomp or Helix I would usually use the Fast for Distorted & Stable for Cleans, you're basically trading Latency for Better. Glad to hear the Axe III is better than them all, especially if the New Pitch Block is incoming for the FM3. I would...
  27. Kruegmeister

    Any word on the FM3 getting the Axe III's Pitch Block?

    The FM3 one is good if using distortion, but Clean or Edge of Breakup it gets warbly or kinda chorus-ish, fine if you want Chorus and/or mask with some Chorus... the AxeFX III is allegedly much better, but I have no personal experience there. The Line6 one is much better all around which is why...
  28. Kruegmeister

    Virtual Capo Parameters

    I do not think you have used the Line6 Helix or Stomp "Virtual Capo" not the Pitch Shifter, or not since 3.0 or used it wrong??? It is much better than the FM3's Capo, I think that is a Consensus -or- Perhaps you have an AxeFX III & are assuming that the AxeFX III & FM3 have the Same Capo, which...
  29. Kruegmeister

    Steve Vai and FM3

    See even Steve Vai has to use a WhammyDT to downtune cause he needs that new & improved Virtual Capo from the AxeFX III :)
  30. Kruegmeister

    Any word on the FM3 getting the Axe III's Pitch Block?

    Come on... it'll fit :)
  31. Kruegmeister

    How do you dial tones for live use?

    I used to run my Roland V-Kit thru my Keyboard 4 Channel Amp I had for a while running Bass & Drums really loud. Now I Jam with a Backing Track on Youtube really loud thru my 2 ASC-10s & my RCF FRFR Monitor, then I run thru my different Presets & Level stuff out. I also started with the Austin...
  32. Kruegmeister

    Any word on the FM3 getting the Axe III's Pitch Block?

    So you're saying we think people would rather spend $2500 on a AxeFX III Rack + FC6 when they prefer All in the Floor @ $2500???
  33. Kruegmeister

    Any word on the FM3 getting the Axe III's Pitch Block?

    I have a FM3+FC6 $1500 + a HX Stomp for a useable Capo & to free up DSP $600, so I am already at $2100 If people are Buying an AxeFX III + FC6 at that Price then YES, they will. Like I said the Helix Floor Outsells the Helix Rack, there is obviously a Preference for having it all in One Unit. I...
  34. Kruegmeister

    Any word on the FM3 getting the Axe III's Pitch Block?

    & when we had a thread asking for a more powerful floor unit we were also unrealistic... Many prefer Not having a Rack Unit. Helix Floor Outsells the Helix Rack by a wide margin. FM8+ with 8 switches & AxeIII Horsepower, yes please
  35. Kruegmeister

    Virtual Capo Parameters

    Yeah, Switching Live sometimes there is no time for Multiple Guitars with Different Tunings. Who did you Build Fighter Jets for? My Company Does a lot of Work for Lockheed Martin (Especially Fort Worth) & Northrop Grumman
  36. Kruegmeister

    Virtual Capo Parameters

    I've got the FM3, so Capo is worse, distorted it's not bad... I think I'll be sticking with my HX Stomp in the Loop... does allow flexibility to free DSP having the Capo on the Stomp, I can bypass the loop for the 70% of the Songs. Plus it gives me a built in Emergency Backup Rig. The Poly Capo...
  37. Kruegmeister

    Recommend IR's please

    I love the Yorks as well. So everyone is aware there are some York Audio IRs in your AxeIII or FM3 already. Fractal gives "Too Much" which can cause option paralysis sometimes... I have a couple Leon Todd ones loaded, York DXVB, Friedman which gives V30, M25 & Blends. The Bogner pack is Money...
  38. Kruegmeister

    Virtual Capo Parameters

    You have AxeFX III or FM3? Because the Virtual Capos are not equal between the 2 devices
  39. Kruegmeister

    Virtual Capo Parameters

    Yeah the Crowd usually will not know the difference. Unless they're a fellow Musician... I remember talking to the Wife about my Bass player Rocking out a B Note when we were supposed to be on Bb, She was like, um sure... didn't notice...
  40. Kruegmeister

    Any word on the FM3 getting the Axe III's Pitch Block?

    My Capo Fix + Backup Rig (Not that I'm expecting a failure)
  41. Kruegmeister

    Any word on the FM3 getting the Axe III's Pitch Block?

    Capo on the HX Stomp uses 50% of the DSP. I use a HX Stomp now in my FM3 Loop, but sounding like that may need to be permanent for DSP needs. HX Stomp Emergency Backup Patches are Capo, 1 Drive, Amp & 1024 IR... it gets tight The Helix I'd put the Capo in the upper Path with Drives, Wah, Chorus...
  42. Kruegmeister

    Virtual Capo Parameters

    I hope thats not true??? I heard the Axe III was supposed to be really great. The Line 6 one is best I've used, including Solo Work, maybe that is gonna have to stay in my FM3 Loop........
  43. Kruegmeister

    Virtual Capo Parameters

    Distorted or Flanged or Chorused Clean you may not hear artifacts, but they are there on Clean or Edge pf Breakup. When the Axe III Capo gets ported hopefully it will get better. Right now I use a HX Stomp in my FM3 Loop cause the FM3 Capo just will not cut it.
  44. Kruegmeister

    FM3 Firmware Version 3.03 beta 1

    The only reason I'd like it sooner than later is I am switching my Rig from my Helix Floor to FM3+FC6+HXStomp. But the FM3 is what I'm using mainly for Amp & Cab. So since I'll be balancing preset Levels mid-practice next practice it would be quite convenient to do it post Cygnus... I realize I...
  45. Kruegmeister

    Let's see those FM3 rigs!

    Does the Modeled KoT not compare to the real KoT? Running Updated Drives Mod,es in 3.03 Beta1?
  46. Kruegmeister

    Let's see those FM3 rigs!

    RedPlate is the BluesMachine (not the 66 version), it has a Fender Clean Channel that goes from Black to Brown to Tweed & the Drive Channel is Dumblish from what I read. Quite Flexible for everything south of Really Heavy Stuff. I intend to profile it whenever I get a Quad Cortex, I Ordered very...
  47. Kruegmeister

    Let's see those FM3 rigs!

    FM3 Round 2 Using HX Stomp for Poly Capo & to "Expand my DSP Power" Took some Setup but works Great using Amp Switch Next to the Stomp for Pitch -1 or -2 Using Toe Switch on Mission SP-1 to Enable Input2 Enabling the HX Stomp Loop Using CS1 thru CS6 to Send Midi Messages to HX Stomp to Toggle...
  48. Kruegmeister

    FM3 Firmware Version 3.03 beta 1

    I wanna say yes to the Pitch Block Sounding Better. But I also noticed my Old Saved presets from my Previous FM3 when loaded had some detune that maybe I did not notice before??? Anyways, before I thought the FM3 Capo was Garbage, this time around & running 3.03 beta 1 I do not hate it anymore...
  49. Kruegmeister

    FM3 Firmware Version 3.03 beta 1

    RIght, Come on you're only playin 1 note at a time... it's not like you need to form Chords or Remembering Scales/Solos... LOL But a good Bass Player IS a Luxury. I've known mine for 46 Years & we've been in Bands together for 26 Years.
  50. Kruegmeister

    AXE lll same problems?

    This might be partially true... but not all... simple Hello World program could be bug free, as could a program that does a simple task. Where this is mostly true, Consider Python where you import many other libraries or C+ where you include other libraries/chunks of code written by others with...
  51. Kruegmeister

    MAX CPU usage live??

    I have many Presets that high cause I'm using the Capo in every preset. 1 thing to remember is FM3 Edit Software raises the usage. So Live you should be slightly lower & Safe.
  52. Kruegmeister

    Gearslutz changed it’s name!?

    America is to PC Now... Germany, Japan, Iraq??? You may attack now, we're to busy on a Juice Cleanse to fight for our freedom...
  53. Kruegmeister

    CS1 Remember State thru Scene Changes

    In case others are looking for a solution. Maintained Switches, I used an Amp Switcher, see the Top of my FC6. HQRP was $17 I set that to External 3 & tied it to Pitch Block with limits of -1 & -2 So if my Mission SP-1 Toe Switch is On I am either Down 1/2 Step or Down a Full Step. This will...
  54. Kruegmeister

    Wish Better Pitch Block.

    Yes but that one is closed so we cannot +1 +1 This is way more important that Cygnus. Look at the "Lets see those FM3 Rigs" thread, a lot of Digitech Drops in this Rigs... Allegedly the Detection has been figured out which was "The Hard Part"... Do it, Do it... :0
  55. Kruegmeister

    FM3 Firmware Version 3.03 beta 1

    If Cygnus made AxeFXIII go from 15.0X to 16.0 then I would gather that FM3 should be 4.00 Beta Cygnus meets 3.03??? I want the Pitch Block more than Cygnus!!! Cygnus there are those that can "Hear or Feel" a difference. The Pitch Block as is makes the FM3 unusable if you need the Capo Function...
  56. Kruegmeister

    CS1 Remember State thru Scene Changes

    Yes, Control Switch wasn't changing Channel, so I made the FC6 Footswitch an Effect Increment that changes the Scene, forgot that change. This does not Stick thru Scene Changes. The Maintained Switch on my SP-1 Expression Pedal keeps the Pitch Block ON or OFF thru Scene Changes, so just need a...
  57. Kruegmeister

    CS1 Remember State thru Scene Changes

    I'm sorry I meant I have it changing the Channel, I'll have to grab a screenshot tomorrow. It changes the Channel just like I want it to & works on any Preset I put the Pitch Block in, just doesn't "Stick" if I change a Scene, stays if I come back to that Scene, but I want it to "Win" the...
  58. Kruegmeister

    Can Someone Convert this Cars by Gary Numan Synth Patch for FM3 CPU Overload

    Thanks, I'll give it a shot tomorrow
  59. Kruegmeister

    CS1 Remember State thru Scene Changes

    Not working tho... maybe related to below? Control Switches apparently can switch Blocks, I have it Incrementing +1 with Limits from A to B But you gave me an idea, maybe I can have it Decrement the Pitch Value from -1 to -2 with the Limits at -1 & -2, will try.
  60. Kruegmeister

    CS1 Remember State thru Scene Changes

    I've RTFM & seem to be having trouble getting this to work... I have CS1 switching my PitchBlock from SceneA to SceneB 1/2 Step & Full Step. I want it to stay at SceneB if selected when I change Scenes, but it will not. I tried the setting CS per Scene to Last & this is not what I want or not...
  61. Kruegmeister

    Can Someone Convert this Cars by Gary Numan Synth Patch for FM3 CPU Overload

    Can someone please streamline this patch down to fit in the FM3, I wrote my own Cars by Gary Numan from what I could understand/align using FracTool, but straight up convert overloads the FM3 CPU. Thanks in Advance. https://forum.fractalaudio.com/attachments/cars-syx.67236/ Also if anyone has...
  62. Kruegmeister

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    Was there a write up anywhere on why this Firmware Update would be vastly better differen than say Quantum, Ares, etc... What were the Major Changes?
  63. Kruegmeister

    Wish Hands-Free Parameter Editing Using Foot Switches & Expression

    Playing Live and/or Setting up New Presets & after Some Modeling updates this is a big plus
  64. Kruegmeister

    Satch's book, a thought on amp in the room. A short story.

    I can maybe give some better input after I try my Friedman ASC-10 at next Practice. But for me I left my Axe II behind when I realized I was luggin a Half Stack + Modeler + Foot Controller to get the Feel of a guitar singing to where it feels like its playing itself. For me FRFR just never got...
  65. Kruegmeister

    If you play metal don’t buy the Helix

    Yes your experience seems odd. Perhaps you were on an old Firmware? As the new one defaults Cabs to have a Low & High Cut now I think? Or maybe the FM3 does that? I forget... Anyways, I've extensively used an AxeFX II in the Past & recently bought an FM3 & a Helix Floor. I sold the FM3 mainly...
  66. Kruegmeister

    Anyone have an electric car?

    Agree to disagree then I suppose.
  67. Kruegmeister

    Anyone have an electric car?

    F150 & Corvette top the list & Tesla has 4 on the list. In the Top 10 "Made in America" doesn't mean the Profits aren't going to Italy (Chrysler/Fiat) Japan, etc... but you are right to a point, that they aren't better or worse compared to a Trax made mostly in Mexico with Profits staying in the...
  68. Kruegmeister

    Anyone have an electric car?

    Don't own a fractal anymore. Fact is Tesla Makes 4 of the Most American cars, they've just been held off the list for the past 10 years for whatever reason. The rest I'll just let you have.
  69. Kruegmeister

    Anyone have an electric car?

    This is a necessity for everyone else's electrics to make it as a truly feasible option beyond just getting to work. It needs to be fast charging too as stopping for a 1/2 hour is not what you want on a long trip, making it even longer. SuperChargers I believe we're @20 minutes, but I believe...
  70. Kruegmeister

    Anyone have an electric car?

    So this one is OK with you, but not a Tesla? Last time it was the "Cost to Charge" in your area... Wouldn't that same cost apply to the Audi? Again, no offense but it seems you have an quite obvious bias for something you;ve never owned... That would be like me saying Kemper Sucks, tho I've only...
  71. Kruegmeister

    Anyone have an electric car?

    No no nerve struck. Just a lot of your information is incredibly incorrect& no offense seems incredibly biased, should have put more LOLs after my statements... LOL with an LOL to my LOL Michigan is by far one of the coldest states with the worst available winters. Electic is very feasible...
  72. Kruegmeister

    Anyone have an electric car?

    Yes, I bought for he 2.3 0-60 & AutoPilot / Full Sel Driving & also like the looks & it's an American Car Company to boot. I have 3 cars that get 12 MPG, 1 that gets 9 MPG & the New Vette as well @ 15MPG So not saving the environment here...
  73. Kruegmeister

    Anyone have an electric car?

    I live in Michigan, my Tesla Model S is great here. But cold weather is why Range is important. Mine being a 2018 P100D gets 315 miles. GM, Ford, Porsche, VW have not figured this out yet, typically delivering 250 or less. New Model S in 2021 starts @412 miles with a 500+ Plaid version When its...
  74. Kruegmeister

    FM3 Virtual Capo 3.0, is this the best the CPU is ever gonna allow?

    For me its that Clean Fender Sound or Marshall JTM45 sound where you can here the Shrill it introduces. What you played sounded good, but High Gain Diezel/Chug or Chorused patches seemed alrightish to me. Edge of Breakup Fender or Marshall Tones were not. My "fake Acoustic" patch it was really...
  75. Kruegmeister

    FM3 Virtual Capo 3.0, is this the best the CPU is ever gonna allow?

    Did they say if it would be possible to improve? Would make a difference for me in my equipment choice path if I knew it was coming up... Not knowing I have to choose like its never going to happen...
  76. Kruegmeister

    FM3 Virtual Capo 3.0, is this the best the CPU is ever gonna allow?

    The Virtual Capo I know is inferior to the AxeFX III one & I've read the other threads. Would like to know if the 3.0 version is going to be the best the FM3 is going to be allowed to do? I'd be OK with a High Quality switch in the block that will only work in minimalistic patch. But right now...
  77. Kruegmeister

    Presets MASTER THREAD - AustinBuddy 1000+ LIVEGOLD TonePack for Cygnus X2

    I just tried the Atomica & SRV ones made available on AxeChange. Your presets are so very close to the Shiva Patch I made that worked well for me Live in Band Context. Going to try those 2 Friday & see how they work "Live" b4 buying. I saw some mention a lower price than I see on the site, am I...
  78. Kruegmeister

    Where's the X-Load?

    Sorry, US
  79. Kruegmeister

    Where's the X-Load?

    I was just about to list mine, used twice. Ended up going FM3 for small gigs. PM if your interested
  80. Kruegmeister

    FM3: My Life Has Been a Lie

    Me too. I was like the OP wanting to use a Fender Clean. When I was on the AxeFX II all my cleans were Fender based. After getting my FM3 last week. I dialed up Band Commander, a Fender Deluxe & Tweed, AC20 Deluxe (not Fender), some Marhsall Amps for Dirty along with HBE & VH4. Took the FM3 to...
  81. Kruegmeister

    Preferring the FM3 these days

    Can you tell me what SD170 / 212 cab setup is more specifically? I also just ordered an FM3 & I am thinking I will use the FM3 for the Smaller Stage Gigs (When we can Gig again)
  82. Kruegmeister

    ExAxeFX2 user that switched to Tube/Analog bought FM3. Have some Questions

    Sorry long setup to Questions which are at the end. I left the Modeling world a number of years back, I was quite good at editing paches, but couldn't gel with FRFR. I also didn't want to lug an Amp to make the AxeFX II work for me, just didn't make sense to me... I went Full on Analog "aside...
  83. Kruegmeister

    X-LOAD LB-2 Reactive Load Box now available

    Never tried Reverb. I've always had good luck selling on eBay. I research going rates and only do Buy It Now listings (No Make Offer option, brings out the Cheap A$$es) Why do you say that, do things go for a higher price on Reverb?
  84. Kruegmeister

    X-LOAD LB-2 Reactive Load Box now available

    I'm not really after that much attenuation. I'm looking for Live Gigging and Being able to Turn up my Masters a bit more to get the Tubes Going. Right now I am at 2.5(8:30) for Master 1 and 3(9:00) for Master 2 - That's so low it's hard to do a slight volume bump cause it's so sensitive down...
  85. Kruegmeister

    X-LOAD LB-2 Reactive Load Box now available

    So what did you think? How is it as an Attenuator? Master Volume were where before and after?
  86. Kruegmeister

    X-LOAD LB-2 Reactive Load Box now available

    So if its soaking 1/2 of my wattage 3dB doesn't sound like a whole lot of attenuation??? I mean with a rock concert being in the 120 range??? Granted just getting my masters past 9:00 is probably gonna help either way.
  87. Kruegmeister

    X-LOAD LB-2 Reactive Load Box now available

    Nope, just ordered mine. I left the Modeler world. Couldn't gel with FRFR. Tried QSC10, the RCF everyone likes. So I bought a Half Stack and thought I'm luggin all this stuff to get that amp in the back feeling back... so then i went all analog besides my Belle Epoch and Strymon Flint...
  88. Kruegmeister

    Jumped from FW9 to Quantum 2.0 need advice.

    This is for my Singer/Rhythm Guitarists Rig (My old Axe II) We've been floating at 9.0 for quite some time now & decided it was time to upgrade. So is Quantum 2.0 essentially FW21? -or- Is it a total departure from the old way? Would we better off upgrading to 19 instead? We obviously do not...
  89. Kruegmeister

    Had my Axefx2 for a year and....

    One word: Live... and not continue to be undead.
  90. Kruegmeister

    tips for cutting through live mix direct/FOH?

    If you have good sound in your FRFR and not FOH then Something is Wrong. The CLR is supposed to be Flat I believe... The Whole Idea of FRFR is to have what you hear on Stage match what is coming out of FOH which should start with a Flat EQ Are you using Out1 for FOH and Out2 for FRFR? If so...
  91. Kruegmeister

    I just accidentally briefly plugged the usb cable into the MIDI port

    These will stop you from plugging into the Ethercon Ports. Amazon.com: Neutrik NE8MC-B Ethercon RJ45 Cable Housing Black: Computers & Accessories This one is in Stock http://www.amazon.com/Neutrik-NE8MC-B-Ethercon-Cable-Housing/dp/B002BEWKR4/ref=pd_cp_pc_0 You can also leave a short Ethernet...
  92. Kruegmeister

    I just accidentally briefly plugged the usb cable into the MIDI port

    I did this some time ago in a hurry in our "mood lit" practice room and my Axe worked fine for a few months and eventually died. So that may be the bad news. The good news is Fractal support was awesome and repaired it at quite a reasonable cost. If you are worried about it dying at a gig then I...
  93. Kruegmeister

    from 10.x to 12.02 impressions

    The encoder thing is common when they use say a 50 count encoder with 50 mechanical detent positions. If there is a detent that is close to the edge you will get 2 clicks and the next will yield 0... I've seen it on industrial HMIs as well. Dear Manufacturers, here is the right way. Use a...
  94. Kruegmeister

    $9,000 a metre USB cable.....

    Yeah but there's more definition in the Pick Attack! (Pick Pocket that is)
  95. Kruegmeister

    Need advice about FRFR vs (Power amp + Cab)

    Some people will not gel with FRFR, no matter how much you spend. I had the RCF NX-12SMA which is highly regarded. In a search for better Feedback when needed, I bought a Diezel D-Moll Half Stack and it was so much better than FRFR for me. Many people use the 4 Cable Method with an Amp. Granted...
  96. Kruegmeister

    Gibson Auto-tuner...I want one!!

    It's not about being too lazy to tune, it's about being able to go from standard to Drop C in seconds, my Dark Fire does it in 10 seconds or less.
  97. Kruegmeister

    Something Cool I've Been Working On

    Only if you use a New Cab UltraRes Cab.
  98. Kruegmeister

    First gig with the Axe, and it sounded terrible

    High Frequency. Analog FX, 2" Tape, etc. usually squash the High End. A digital delay will be clearer (or less warm) than an analog delay. So, I would say when someone says it sounds digital it has too much high frequency. This loss of High Fidelity is usually thought of as warmth. It can be...
  99. Kruegmeister

    Axe2 Emulator for AxeEdit "Offline Mode"

    Not sure if this is possible, but if an AxeFX II Emulator could be made to talk to AxeEdit 3.0, this could allow "Offline Mode" If AxeEdit is operating Client/Server, it would seem like something that could be done...???...
  100. Kruegmeister

    How many here are gluten-free or organic vegan for their guitar?

    I'm a Gluten for a bunch Beers and a few Shots too. Rock Star Style!
Back
Top Bottom