Search results for query: *

  1. muleskinner

    Copy / Paste Amp Settings Whilst Keeping Modifiers?

    Hi, Is there a way to copy/paste settings between blocks whilst maintaining the modifier states of the original? E.g - I want to copy amp settings from preset 1 to preset 2 but maintain all modifiers I have already set up on preset 2? Only way I have found to do it so far is copy X and Y...
  2. muleskinner

    Are the XL Factory Cabs Available For Mark I/II Owners

    Hi, Thread title says it all really. Is there any way us I/II owners can download the XL factory cabs (that aren't available in cab packs) for use in user cab slots? I was looking through the cab list on the wiki and presume cab numbers > 132 are XL only... cheers
  3. muleskinner

    Turning A Controller On/Off With MIDI

    Hi, I've never been that keen on the Tremolo block in the Axe but have been getting results that I like by using an LFO to modify power amp volume and tweaking various parameters (this is on Fender amps, mainly the Vibrolux). Is there a way I can turn activate/deactivate this with a MIDI...
  4. muleskinner

    Completely OT: Any gamers out there?

    Hi, Please forgive this unashamed effort to draw a bit more publicity to one of my projects. I've just released the first gameplay trailer for a retro-style videogame I've been working on with one other guy for the past year. It's a pretty idiosyncratic project that features a fat, naked guy...
  5. muleskinner

    Getting GAS for Tremolo - not happy with the Axe one

    Hi, I know tremolo isn't the most exotic effect but it's one that I like to use a lot (big CCR/John Fogerty fan) and I've always been a bit underwhelmed by the one on the Axe. Seems ridiculous for something that 'just' modulates the volume but the Axe one always seems too clinical to me or...
  6. muleskinner

    Copy/Paste Just X or Y Block Settings?

    Hi, Is it possible to copy just the X or Y settings of one block and paste onto another either on the front panel or in Axe Edit? E.g. copy X setting of Delay 2, paste to Y setting of Delay 1. cheers
  7. muleskinner

    Drive Block In Parallel Causes Phase Issues

    Hi, I've finally figured out why I can't get the bass tone I'm after. I need a drive block running in parallel with a clean tone. The 'mix' knob on the drive block doesn't work as (as has been discussed) it filters the signal removing a lot of the low end which is hopeless for bass. I...
  8. muleskinner

    Just For A Laugh - Some Stupid Videogame Music Made With Axe FX

    This is the theme song for my latest game Floppy Frog by my company BitBull Ltd. I just thought I'd post this here for a laugh seeing as I used the Axe FX for all the guitar parts and as it's so processed the effects hide my sloppy playing! I normally play quite rootsy kind of stuff. I...
  9. muleskinner

    Converting Ownhammer IRs to UltraRes With Cab Lab

    Hi, I have the 121 and 212 IR packs from OwnHammer which I understand I can convert to UltraRes format using CabLab (which I also have). Can someone please point me in the direction of the best way of doing this? I presume I use the 48k samples and NOT the ones in the 'truncated' folder...
  10. muleskinner

    Why Won't The Axe FX Keep My Beer Cold?

    Like this!
  11. muleskinner

    FX Loop - Am I going Nuts

    Hi, I never used to have any issues with the FX Loop but now I just can't get the darned thing to work! I'm routing through an external compressor - I know I have everything routed correctly as I can see the gain reduction LEDs on the compressor flashing and I can see the input 2 (L) LEDs...
  12. muleskinner

    Simulating Amp FX Loop - Turning Preamp Simulation Off?

    Hi, Please feel free to tell me if I've completely got the wrong end of the stick here but as I always understood it most real amp fx loops and inbuilt fx (reverb, trem etc) are positioned between the preamp and poweramp stages. There doesn't seem to be a way to emulate this in the Axe...
  13. muleskinner

    How Do I Back Up User Cabs Without Axe Manage?

    Er... just spent a while capturing a bunch of IRs and am now slightly worried I don't appear to be able to back them up. I normally use Axe Manage in AE1.0 for this but I've just realised it only seems to 'see' user cab slots 1-50? cheers
  14. muleskinner

    Drive Block Mix Parameter - True Bypass?

    Hi, I'm attempting (so far unsuccessfully) to get a convincing emulation of my Malekko B:Assmaster (Maestro Brass Master clone) in the Axe. Part of the reason I'm not managing it seems to be the 'mix' parameter on the drive block. When set to 0% and the level right up it still seems be be...
  15. muleskinner

    Sync to MIDI Clock

    I see after some searching that the Axe can't act as a MIDI clock source, is there any way to get it to slave to an external MIDI clock? Bit disappointed to find this functionality not there (and if it is there I'm buggered if I can find it)!
  16. muleskinner

    Putting Stuff On Top Of The Axe..

    ...is it OK? I don't mean like pints of beer, I mean other rack units. Bit worried about it overheating. The piece of gear I need to place on top of it covers about 50% of the Axe's surface. cheers
  17. muleskinner

    FW10 - What's Changed In The Rotary Block?

    Hi, Seen a few comments mentioning this has been improved but no mention of it in the release notes. Just wondered what's been done... cheers
  18. muleskinner

    Regarding Drive, Master And Level Now On Amp Select Page

    ThankyouThankyouThankyouThankyouThankyouThankyouThankyouThankyouThankyouThankyouThankyou :D
  19. muleskinner

    Quick Control Knobs Still Control Manual Controls When Inputting Text

    Hi, I mentioned this a while ago in another thread but thought I'd re-post in the official bugs section as this one keeps screwing me up! If you have the quick control knobs assigned to 'manual control' modifiers they're still active when on the 'save' screen. This means if you use them to...
  20. muleskinner

    MIDI Thru Crashes Axe

    Hi, I have an FCB foot controller hooked up via MIDI to the Axe and the FCB Uno editing s/w. I'm using an Emagic MT4 MIDI interface which is old but usually extremely reliable and robust. My setup is... PC -> MT4 -> FCB MIDI in FCB MIDI out -> Axe Axe MIDI Thru -> MT4 -> PC...
  21. muleskinner

    Manual Knobs Un-useable After Update

    Hi, 9.0 sounds fantastic but... ...after spending several hours over the past week getting a config that I like with the manual control knobs they now no longer work! It's like there is this massive lag on them and sometimes they just appear to do things of their own accord or not respond...
  22. muleskinner

    Something Simple - But I Can't Figure Out How To Do it...

    Hi, I wonder if anyone can figure out a solution to this for me... I want to have two cab blocks running in parallel and to be able to blend between them with one knob. Ideally a knob that can be assigned to one of the manual controls. I don't want to mix two cabs in one block as I...
  23. muleskinner

    Assigning Quick Control Knobs as Modifiers - Does This Work?

    Hi, So... I'm trying to use this as described in the manual using fw 9b. I want to assign the amp's drive and level controls to quick control knobs C and D. When I assign the drive control to 'Manual C' it just seems to drop to zero even while I'm still on the edit page and without...
  24. muleskinner

    One thing that seems unnecessarily hard on the Axe...

    ...is the (non) ability to copy parameters from one block of the same type to the other. I find myself wanting to do this all the time, either when creating true stereo setups or when I have a preset saved in a global block of DRV1 for instance and I want that setting in DRV2. You can do it...
  25. muleskinner

    Is Axe Edit OK just for uploading IRs with FW9b...

    ...or should I leave well alone?
  26. muleskinner

    Browsing IRs - an idea

    OK, this may be a dumb idea but I'm gonna fire it out there anyway. The only thing I find frustrating about the Axe is the process of browsing IRs. It makes such a fundamental difference to one's tone yet there seem to be no real 'logical' way of doing it. I tend to use the WIKI for...
  27. muleskinner

    Lo-Fi - One Unique Amp Captured

    OK - for those who like a bit of lo-fi! IRs of my Tin_Tone 'Bluebird' amp, one of a kind made from a biscuit tin by Jon Free. I have a matching guitar as well :D Recorded with open and closed back, on and off-axis. Mojave MA200 mic. Download...
  28. muleskinner

    About Re-Setting The Amp Block

    Hi, When updating to new firmware we are often told to 'reset the amp block' to return parameters to their defaults. I just tried this and, sure enough, everything resets to default parameters with the exception of certain things such as drive and tonestack controls (though the bright cap...
  29. muleskinner

    Mono/Stereo Routing Question

    Hi, OK, this may be dumb but I've been playing around with some of the stereo FX and just want to check I've got something right... If I want a stereo effect before an amp or drive block (phaser, rotary speaker, say phaser for the sake of argument) and want to preserve the stereo field I...
  30. muleskinner

    Some New Bass Cabs For You...

    Hi, Selection of a few bass cab IRs I did. Some of these are actually the DI of my Ampeg SVT-350T at various EQ settings I used a lot. The rest are taken from some pieces of software that shall remain nameless. Personally I particularly like the 'oakdale' though YMMV of course. Hope...
  31. muleskinner

    HELP Firmware Update Appear To Have Frozen - What Should I Do?

    Er... this doesn't look good. Just tried to update firmware using Axe-Edit on Mac. Everything seemed to go OK but the front panel seems to have frozen at the end of the 'verifying' process. Should I just turn it off? I don't want to screw anything up... cheers
Back
Top Bottom