Search results for query: *

  1. C

    Neal Schon GoT

    It's not about being jeolous, pissed, envious or anything like that. NS is a virtuoso musician. No one on the planet plays like NS. There's no doubt that tone is as much in the hands as anything, but a 2x4 with strings, pickups, and knobs is still gonna sound like sh!t - don't care who you...
  2. C

    Low and High Cut For Live Performance

    Low cut 70hz, 12db slope. High cut 6500hz, 12db slope Our engineer puts a PEQ on my guitar and cuts the lows some. At 70hz, my IEMs sound full though and it doesn't really bother FOH
  3. C

    Neal Schon GoT

    In the rig rundown video that Cooper did, he had (2) 5153 half stacks (mic'ed) on stage and his pedal board. The first pedal on his board was a Boss 4 knob compressor with the first and last knobs dimed IIRC I doubt this preset truly represents his live tone completely. But, there are some...
  4. C

    5153 50w Blue Presence

    Thanks for the replies I updated to 23.05 from an earlier revision. I was previously at the revision where the triode algorithm had been updated (loved this update). When I moved to 23.05 my tones changed (some characteristics I like, and some I don't). Pot tapers and bias points changed with...
  5. C

    5153 50w Blue Presence

    I use the 5153 50w Blue model as my main amp. I have been setting the presence knob at around 2.04 since I built the preset (that matches the factory 5153 preset using the same cabs). What equivalent setting would that be with updated presence taper pot? Just looking for a rough idea because if...
  6. C

    SOLVED: Huge 'HISS' at switch-on...

    This makes 3 times an inexplicable noise has taken over a unit since 23/Betas began. The others were remedied with a power cycle IIRC. Hope it's not a bug
  7. C

    Talk me out of (or into) buying a Suhr Guitar

    To the OP; ask the question, "how many folks have experienced dead frets on a Suhr Modern". While I don't think it's a widespread problem, it's prevalent enough to give me pause Play before you buy
  8. C

    Axe-Fx III Firmware 23.02 Release

    Update completed - no issues whatsoever. Some part of this update tidied things up nicely. I made very minor adjustments in BMT and added a touch of gain on some scenes. Dam, it sounds good! Gold Plate reverb is my new favorite
  9. C

    First show with Dyna Cab - Bust

    Thanks for your sage advice The rep was from there to help set the pin spacing for the right depth of field on the arrays. I'm not a sound engineer, but that's my best explanation. The system was dialed in using our normal pre-show sound track. It sounded really good. The drum sound, snare...
  10. C

    First show with Dyna Cab - Bust

    A quote that sticks out the most for me is the same one I hear from our engineer all the time, "it needs to sound good in your IEMs first." That's why I dial tones using my stage gear - IEMs, No 1 axe, guitar wireless, and headphone output from my IEM transmitter. I also use the Axe headphone...
  11. C

    First show with Dyna Cab - Bust

    Thanks for all the replies. I'm not exactly sure what the engineer did but the net affect was the guitar laying down in the mix. I'll find out what he did when I take my rig there to dial. We've been using JBL line arrays for a couple years (2 or 4 per side). These new ones (6 per side) are...
  12. C

    First show with Dyna Cab - Bust

    The engineer has a PEQ set for my guitar. It cuts some low end and boosts 2k range so I sit well in the mix. This also leaves my IEM signal unchanged so I have the sound I like in my ears. Not sure what all he tried but it ended up pulling me down. He knows what he's doing We have FOH scenes...
  13. C

    First show with Dyna Cab - Bust

    ****
  14. C

    First show with Dyna Cab - Bust

    The audience loved us. It's 80's rock -Journey, Styx, Loverboy, Jovi, etc - what's not to like :) Our engineer pulled me down in the mix except for solos. I heard several comments like, "great show but I couldn't hear you as well tonight". Credit our engineer.
  15. C

    First show with Dyna Cab - Bust

    I didn't hear it in my IEMs at home. I use Shure SE846 buds and I trust them. But, when I got home and had time to dissect things and knew it was there, I could hear it. I think it was there with my previous legacy IRs but it didn't "appear" with those. I DON'T think it's a bug, it's me and...
  16. C

    First show with Dyna Cab - Bust

    Well, as the title says my first show with Dyna Cab was not good. Back to the drawing board (5153 amp model and 5153 cab using Dynamic 2 and Ribbon). Our new JBL line array speakers are really, really good. Unforgiving. It's difficult to describe what it sounded like, but there was a high...
  17. C

    JUSTIN DERRICO (P!nk & The Voice) Fractal Axe-Fx III Tone Tour

    I've struggled with the idea of getting my tone to sit perfectly in the mix. In the end, if it sounds thin and 2khz dominant, I'll play that way. If it sounds harmonically rich, full, and huge - I'll play that way. I keep my tones balanced and full, but not necessarily FOH perfect. I let our...
  18. C

    JUSTIN DERRICO (P!nk & The Voice) Fractal Axe-Fx III Tone Tour

    Love the pick attack on the Shiva Lead model tone. It's chunky. Bet it feels great and makes those really fast runs sound glorious.
  19. C

    Bug? Reverb Block Low Cut Slope Not Functioning

    On the Low Cut subject, is the Low Cut in the Amp Block Input EQ and the Preamp tab Low Cut supposed to be mirrored? Noticed this on the 5153 50 Watt Blue model
  20. C

    Suhr Modern - Dead spots

    Reverb.com purchase
  21. C

    Suhr Modern - Dead spots

    I'm considering picking up a used Suhr Modern with a bolt on neck. I've been interested in one for a long time, but I've been a bit concerned about buying the perfect guitar only to find it has dead notes due to resonance issues or whatever. How prevalent are they in this model? Buying used...
  22. C

    Early Van Halen

    Great tone and playing! For the life of me I can't figure out how folks get the factory presets to sound so good.
  23. C

    AFIII yet another live song...

    Beautiful!! Took me back
  24. C

    Bell-like overtones/noise after lowering action

    Floating trem? Are you pushing on it with the heel of your hand and causing the strings to be slightly lower >>> buzz city. Just a thought
  25. C

    What's Wrong with my Setup?

    I, too, have the same issue with every preset I've ever tried. None of them sound even remotely good, but I always use my SE846 IEM buds to monitor. They're the only thing I ever use as my band is silent stage sans drum kit. So, I've tried to acclimate to them. Our FOH engineer always tells...
  26. C

    EBMM Majesty owners/ guitar tech

    my bad, the EBMM only has 2 pivot posts. Was confused thinking of the PRS system with 6 pivot posts
  27. C

    EBMM Majesty owners/ guitar tech

    My experience has been with JP15s - same trem system Sent one back to EBMM for the same tuning instability you describe. They replaced a lot of parts, including the entire neck. It was better but not good enough to play with on stage. I ended up sending it down the road. I still have a BFR...
  28. C

    Setting low cut high cut ... where to start from ...

    I set my low cuts around 90 hz and hi cut is at 9000hz in the Cab block preamp tab. I favor bright tones and mainly use the 5153's Some other things that come into play from my experience. There are hi/lo cut parameters scattered throughout the blocks in my kitchen sink preset. It's the...
  29. C

    Sizzle

    What frequency range does "ssssssizzle" typically reside in?
  30. C

    Axe-Fx III Firmware Version 20.03 Release

    It's been said before in this thread - this update has been fantastic for tones!! I use primarily use 5153's and they all sound freakin' amazing. Before this update, I used several parms to get weight, kind of an under-thump if you will, in my single note lines especially in the higher...
  31. C

    Def Leppard On Jimmy Kimmel - Off Air Peformance

    Watched a DF concert on Axs Tv this past weekend. The show was originally aired in 2020 so it was recorded some time before that - they sounded great
  32. C

    AFIII Bad Boys Whitesnake.

    Nothing short of BADASS!!
  33. C

    Def Leppard On Jimmy Kimmel - Off Air Peformance

    Phil's tone lacks punch - not good to my ear. I've heard way better Axe tones on this forum. His Sustainer thing doesn't sound natural at all either but that doesn't have anything to do with the Axe Viv's tone is good. Sounds pretty right Overall, it sounds like a board mix - those never...
  34. C

    Axe-Fx III Firmware Release Version 19.08

    Wow, pretty significant change and improvement to my ear (5153s). I've been struggling trying to strike a balance with the bass/depth/lo cuts and not end up with high notes sounding thin. This update really improved things
  35. C

    AFIII Blue on Black

    Very nice!
  36. C

    AFIII Gary Moore Solo/Improv fingerstyle mode + preset inside

    Dam, that's so good. I think Gary would approve
  37. C

    WTF just happened to my FC12???

    Mine FC12 did it yesterday for the first time in a long while. I have a button assigned to the tuner and I was tuning. My foot inadvertently lingered on/over the button for a few seconds and it froze in the "on" state. Unplugged the XLR for a reboot and it was fine. This is the same scenario...
  38. C

    FM3 Who’s Crying Now…

    Great tone, feel, and touch. Very well done
  39. C

    Octave Divider in the Pitch Block

    I'm trying to get the sound of the guitar in the opening phrase of Rock and Roll Fantasy by Bad Company. Sounds like an Octave pedal so I'm using the Octave Divider in the Pitch Block. It's pretty close, but my problem is that when I pick a note harder/softer, the octave pitch seems to stay...
  40. C

    AFIII No More Tears Solo

    Hi Mark, great rendition of that solo! Question; at the end of the solo I see you depress a push/pull knob - what's that doing? Onboard preamp?
  41. C

    Axe-Fx III Firmware Release Version 19.06

    Significant change in tones for the better. 19.06 sounds more alive with clearer highs and tighter bottom. Major improvement over 19.05 to my ear. I mainly use 5153 and Boogie amp models
  42. C

    WTF just happened to my FC12???

    I've had a similar thing happen with my FC12. For me, it seemed to happen when my foot would linger too long on the button. That particular button or a couple buttons around it wouldn't function. Unplugging the FC xlr cable would reboot and restore things. I haven't had this problem in long time
  43. C

    5150 build.

    Fret work looks AMAZING!
  44. C

    19.05 not working out

    Going from 16.xx to 19.05 trashed my kitchen sink preset. I've spent weeks trying to get it back and luckily I've had no shows to play. After revamping my preset signal chain order, auditioning dozens of IRs, hi cuts, lo cuts, speaker impedance curve tweaks, playing till my ears are wrecked...
  45. C

    Infinite Journey tribute band: fx3

    Looks like the guitar is a PRS with a sustainer?
  46. C

    Texture

    Saturation in the Cab block preamp tab helped. Thanks for the tip in one your videos Leon Todd!
  47. C

    Texture

    I have a .wav audio file from Studio One that's zipped. It becomes more apparent with a little volume. I'll post the preset later
  48. C

    Texture

    I'm hearing something in the distortion on 19.05 that I don't recall noticing before. There's a grainy texture in the distortion sounds. It seems to be most prevalent in the highs and is most noticeable with the brighter IRs. It doesn't sound natural and I haven't been able to control it with...
  49. C

    Sounds boxy

    It may be that not everyone is using your actual power amp and cabinet. It's tough to offer opinions without the same set up. I've found that sometimes increasing highs doesn't work as well as decreasing lows to get a better balance in the tone
  50. C

    5150 build.

    Those fret ends are thing of beauty!
  51. C

    AFIII Pink Floyd - Dave Gilmour - Another Brick in the Wall Part 2 Solo Cover

    So good! The bends in that solo are tough to get right. You did them superbly and the tone is the icing on the cake
  52. C

    Using a metal pick made my III sound way better

    Metal picks sound bright and eat strings. I used stone picks for a time - bright but don't chew up the strings as bad
  53. C

    AFIII So I Heard You Like The Blues

    Very tasty, indeed! Tone and playing are outstanding. Love the way you switch back and forth seamlessly between major and minor blues scales
  54. C

    AFIII Bryan Adams- Run to You (w/ Freqout)

    Quick rundown on the amp model and FX, please? I'd like to try and build a scene for this - but I've had no luck with downloading presets. Is this recording using the USB lightning adapter? Sounds righteous! Thanks in advance
  55. C

    High pitch playing artifacts

    Something I've noticed in my tones as well as others recorded tones, mainly higher gain stuff (my goto amp is 5153 100w Blue) The subtle noises that we make while playing, like the sound of fingers moving to different positions, pick chirps, etc - they're all part of playing and for me add to...
  56. C

    Hammer on loudness

    Technique is just as important as gear set up to me. The hammer impacting the string on the fretboard is the first part of it, but the pull off/release of the string helps to sound the next note in the sequence.
  57. C

    Axe FX sounds better after a few minutes?

    I've noticed that as well. I've always thought it was just my ear adjusting though. I use IEM buds anytime I play
  58. C

    Anyone put a Dimarzio Super Distortion in a Les Paul?

    I thought it was a SD Distortion
  59. C

    IIC++ in Cygnus

    Loaded 16.02. Double clicked the negative feedback parm - it went to 3.5 from 10. Adjusted some EQ setting and there it is! My bottom end is there in all its glory! It's fat, well defined, and rude. Awesome This firmware really is absolutely fantastic. The top end is just beautiful with...
  60. C

    IIC++ in Cygnus

    yes, ice cream is a 1:1 adder of bottom end at my age
  61. C

    IIC++ in Cygnus

    I loaded 16.01 this past weekend. I've got most of the scenes in my kitchen sink preset working nicely. There's a new texture to the distortion (I play mostly high gain on the 5153's). Overall the update is fantastic especially in the highs (to my ear) My main solo scene uses the IIC++...
  62. C

    KZ ZS10 suggestions

    My ZS10's are NOT the Pro's I really like the AS12's. They're a little heavier but with the right foams they stay put well. Great bass response and balanced highs to my ear
  63. C

    KZ ZS10 suggestions

    I have the ZS10's and noticed a little emphasis on upper mids - still they sound great. I just got a pair of AS12's - they're noticeably better than the 10's and seem more balanced to my ear They are both WAY better than the Shure 425s I used before
  64. C

    Is there a "best IEM" for Fractal?

    The KZ ZS10's are fantastic for me. The KZ ZS12's are even better and only cost $75. I've been using IEM's for a little over a year. They require some time to acclimate to the sound. I still prefer wedges etc, but IEMs make things so much easier at a show. My band is silent stage sans...
  65. C

    Drinking alcohol while creating a preset?

    I swore off tweaking or building tones when I'm drinking. They never sound as good as I remember!
  66. C

    NGD: Charvel USA Select DK24 HSS Autumn Glow

    I ended up buying a 2nd JP15 from Willcutt. When I got it, tuning stability was fantastic even after changing to 9's and resetting some things. I noticed something with it though - the tuning machines were set TIGHT. On my first string change with it I decided to loosen the tension on them...
  67. C

    NGD: Charvel USA Select DK24 HSS Autumn Glow

    Congrats, nice looking axe! How's the tuning stability?
  68. C

    How do you rate Axe-Fx 3 effects vs Eventide and other high end stuff?

    I have an Eclipse. I used one preset from it in the FX loop of all of my tube amp rigs for the past 14 years. One problem with it was load time for preset changes - in a live situation, it was too slow. I have a TC G-Force that handled all changes in presets for delays, reverbs, etc. while...
  69. C

    Question about yellow circles on parameters

    It's a great manual. In my original post I asked what the function was called so I could find it in the manual. Leon's video helps a lot!
  70. C

    Question about yellow circles on parameters

    I saw a video posted where the user had the graphic EQ sliders automated to move when higher notes were played. What is this function called? I can find it in the user manual if I know what it's called.
  71. C

    What's the current consensus on body wood's effect on electric guitar tone?

    I've bought (2) JP15's in the last 6 months - both brand new. They are identical in build specs with the only differences being total weight and "BFR" version. The BFR version is about 1 pound lighter (7.1# to 8.0#) than the standard production guitar. I was also told the BFR used hand...
  72. C

    Installed the Latest USB Driver. Now I cannot connect to the AXE from AXE edit

    Same - reinstalled new driver
  73. C

    JP15 Tuning Stability

    Sorry you're having problems with tuning, it's frustrating. When I received mine, I immediately changed to a 9 -42 string set. I adjusted the truss rod, reset the claw, and adjusted bridge for a nice low action (no buzz). I leveled the bridge setting it parallel and flush to the body surface...
  74. C

    Tremolo Tension: The Secret to a Great Strat

    This point is spot on and easily illustrated. Tune a floating bridge system to pitch. Now, significantly raise the saddles on the bridge and change nothing else. Re-tune the guitar to pitch. Now look at the bridge and you'll see that it's lifted in the back. To re-level you'll need more...
  75. C

    JP15 Tuning Stability

    Update on JP15; I ended up sending it back to the factory under warranty for the tuning problems. They agreed something wasn't right and replaced a lot parts trying to find the problem. Ultimately, they fixed it. My JP15 is now rock solid! It plays and sounds fantastic and tuning stability...
  76. C

    New Suhr has "dead" notes :(

    It's inexcusable to me that a high end, very expensive instrument would leave the manufacturer with this kind of defect. It should be part of their final inspection criteria. This is especially true on a custom order instrument that the buyer can't play before buying it
  77. C

    JP15 Tuning Stability

    I'm still fighting tuning issues, although not as bad as they were initially. I was hoping to bring this thread back to the top and ask any JP15/6 owners about their setup. String gage, number of springs (configuration too), bridge plate float (level, back end up, back end down), tuning...
  78. C

    JP15 Tuning Stability

    I'll give it a try
  79. C

    JP15 Tuning Stability

    My G goes flat after a finger bend and a down flick on the bar brings it back. Pushing on the string behind the nut does nothing - only a bounce on the bar resets it. The things that have helped the most are going to (2) springs in a V pattern and using the Eric Johnson tuning sequence - G D...
  80. C

    JP15 Tuning Stability

    Agree on posts moving. The EBMM posts don't lock It came with 10's and (3) springs and that was terrible with 9's. EBMM told me to use (2) in a "V" pattern for 9's. That helped quite a bit. So far, lube has helped some but has been short lived. I have 2 Soloists (one is a newer custom...
  81. C

    JP15 Tuning Stability

    Thanks to all for responses. It has locking tuners and with the piezo locking saddles are a no go I've worked on the nut, lightly cleaning it up with 800 grit paper and lubing per EBMM recommendation. I made a short video at their request to show how it was going out of tune on a one-step G...
  82. C

    JP15 Tuning Stability

    I just bought a brand new JP15 - build date is Aug 26, 2020. I switched to 9's and re set-up the guitar the day it arrived. Neck relief is 0.005" ish and the claw is reset to level the bridge perfectly (I did this with a dial indicator) and the pivot posts are level. The guitar plays...
  83. C

    EBMM JP6 Connection Options

    I just picked up a used EBMM JP6 BFR. I'm looking for advice on setting it up with the AFIII. I use a wireless system for guitar, so I only have one mono cable to work with. Is there a way to get both the piezo and magnetic pups to work correctly? I can create a scene for the right tone...
  84. C

    New Suhr has "dead" notes :(

    I've had (2) guitars over the years with dead spots. One was late 80's Hamer double cutaway. It had a 'hog neck, 'hog body with a carved quilt maple cap. It was dead as a mackerel at the 12th fret on the G string. I had bought it used, but contacted Hamer anyway. They said to send it back...
  85. C

    Pitch block or Digitech

    Question; can the virtual capo be used to create drop D tuning and just drop the low E string a full step? If so, could I assign it to a button on the FC12?
  86. C

    Playing iTunes and your guitar through the Axe-Fx III at the same time

    thanks for the help - worked like a charm! This forum is one of the best parts of owning the A3!
  87. C

    Playing iTunes and your guitar through the Axe-Fx III at the same time

    I'm love to set up my system to play YouTube videos through my monitors/USB. I've looked through the user manual and it's not clear how to do this - I haven't been able to find System Preferences. Is it accessed through Axe Edit? I have Windows 10 on my pc. Any guidance is appreciated
  88. C

    Stuttering (JVM OD1 Orange)

    I own a JVM410HJS. I haven't powered it up since I got the A3. One of the first things I did after getting the A3 was an A/B comparison. Yup, the Axe sounds nearly identical - actually better in ways because there's so much more sculpting control The best part of the HJS now is how it looks...
  89. C

    Tone vs Output Level

    I adjusted my IEM mix levels to get everything balanced after switching to +4db. I'm going to change my presets to be more overtly bright and reduce the bass as well. I'm also going to try an experiment; turn my FRFR's volume control way down and crank my OUT 1. That should tell me...
  90. C

    Tone vs Output Level

    We use IEMs in the band (semi-silent stage with acoustic drums only). The tone changes in that volume (sound pressure) controlled environment, too
  91. C

    Tone vs Output Level

    Question for the gurus on this forum; I've been rehearsing with my band lately and trying to work things out with FOH (A3 newb). Coming from playing at home using my FRFR's, I had my tones pretty well tweaked with a nice balance of highs, mids, and bottom end (I'm an 80's player for...
  92. C

    Virtual Rehearsal Software

    Anyone have any experience with setting up a virtual band practice? I would think latency could be a real problem but one of the guys in my band wants to give it a try. As I understand it, there are several apps/softwares available. More than anything, we're just trying to find a way to make...
  93. C

    Axe Fx III with Eventide Eclipse

    I have an Eclipse in my Marshall rig rack, too. My favorite preset is 444 Chorus/Delay/Verb with light tweaks and mix set at ~30%. For me, it was "on" all the time as the basis for my ideal 80's tone. I haven't been able to get close to that sound with the A3. Honestly, I've been determined...
  94. C

    My tone is too perfect?

    I've only been playing the A3 for a few months. After learning the system and getting it close to "my" tone, I couldn't help but think the same thing - its almost too good. I just didn't breath like a tube amp does and it was too crisp around the edges. It didn't bloom on an open G chord, ya...
  95. C

    IEM best practices

    I took the advice of several people who posted in this thread and bought a pair KZ AS10, 5 driver earbuds from Amazon. They were only $60. Tried them at rehearsal and A/B tested them against my Shure 425 buds. WOW!! What a difference! I think I'm on my way now Thanks for the great...
  96. C

    IEM best practices

    Great thread! I started using IEMs about 6 months ago and I'm still struggling to find the feel. My band has top notch digital gear and I use an Ipad to control my own mix. I've been told the same thing I read above - "get what you need to do your job". I my view, there is NO musical...
  97. C

    Graphic Frequency Display

    Thanks! Honestly, it's just replacing the Marshall logo that's been behind me for years!
  98. C

    Graphic Frequency Display

    I've seen what looks like a graphic frequency display on a couple of Youtube videos. Is it a full screen "bouncing" bar graph of the output? Can anyone tell me how to access it?
  99. C

    Axe-Fx III Firmware Release Version 12.03

    Anyone played the Brit Brown model with FW 12.03? It's my favorite amp block and can't imagine how it could get any better. But, a more explosive pick attack esp on pinch harmonics would be epic
  100. C

    FC-12 not responding.. help!

    No hold functions on these buttons - block bypass programmed on them. The odd thing is that it's 2 specific buttons and all others work just fine. The other buttons do scene changes. I can play shows with it as long as it doesn't progress to other buttons.
Back
Top Bottom