Search results for query: *

  1. kavevester

    Atomic's Tonocracy 2.0 now free

    I guess you use a DAW for this or stand alone version but what about live? Expression pedals ect.? What can I use it fore?
  2. kavevester

    Blocks

    Presets yes - bought from all you mentioned thanks
  3. kavevester

    Blocks

    Where can I get lovely blocks to download?
  4. kavevester

    Windy effect. To go in "She's so heavy/I want you" with Beatles

    ok thanks. I'll try it
  5. kavevester

    Windy effect. To go in "She's so heavy/I want you" with Beatles

    In 2012 there was a Chef's wind effect which I cannot download to theAxe III. Anybody has a stedy blowing of the wind kind of effect? Think that would go fine in the end of Beatles "She's so heavy/I want you"
  6. kavevester

    Wish FS ring light color change

    Still make no sense now its possible to have two effects on one push button off cause it should indicate if the second is active or not
  7. kavevester

    Cannot delete preset

    I think I have had this problem before but cannot remember the fix.. Cannot delete either in Preset handling in Edit or the front of the Axe (III)
  8. kavevester

    Block Library Exchange?

    Anybody have link to good block exchange? They are here and there but no really bigger collection.
  9. kavevester

    Global performance controls

    Ahhhhhhh..., in that way.. Thank's - would also have been rather confusing :-)
  10. kavevester

    Global performance controls

    It says in the user's manual "One of the Performance Control pages is “Global” meaning that the 10 parameters you place there remain the same even as you change presets. The values of these controls change — for instance, if you place AMP 1/TREBLE, you will see the Treble setting change from...
  11. kavevester

    Dyna cabs

    So there will be added many more from Fractal? It's just some said that it was easier now there wasn't that many so I thought that the groups of 1x10 2x12 4x12 etc. now were covering all the, or many, variables that could exists within 1x10 2x12 4x12 leaving us with fewer cabs. The legacy list...
  12. kavevester

    Dyna cabs

  13. kavevester

    Dyna cabs

    So where do the Dyna then come from? There are about 50... Will this list be extended from Fractal then? I know it's smarter due to the mic position is easier to handle like this but is that it or also the recording (IR) is different?
  14. kavevester

    Dyna cabs

    Ohh yes seems better with fewer caps but what happend with all the legazy caps? They are not inDyna! What am I missing here?? Fewer due to mic placement etc but still there is a lot from legazy not mentioned in Dyna.. Why is that?
  15. kavevester

    The Mother of All Effects Blocks Thread (Multi-Model Edition)

    Much better.
  16. kavevester

    Blocks exchange

    It's nice with sharing presets but mostly I'm looking for other users block settings so I don't have to copy FX blocks into my preset. Anybody knows of a blocks library (in here or on the web)? Easier to scroll through them trying to find new amp/cap tones. It's here the tone is mainly...
  17. kavevester

    Ignore scene change

    I want it to ignore when switching scene in relation to on/off but not the individual settings for that particular scene. So when I manual switch the drive on in scene 2 it has to, of cause, take the settings from scene 2 but just dont want the on/off to follow scene or last state..
  18. kavevester

    Scene ignore

    When using scene ignore I think there is an error. I want it to ignore when switching scene in relation to on/off but not the individual settings for that particular scene. So when I manual switch the drive on in scene 2 it has to, of cause, take the settings from scene 2 but just dont want the...
  19. kavevester

    Ignore scene change

    Ha ha never noticed that little button there.. Thank's and yes that will do the job :-)
  20. kavevester

    Ignore scene change

    Using scenes I sometimes want a block to stay in the state it is in despite change of scene is the opposite. Can I do this? Could be the reverb should stay on when changing from scn 2 to 3 although scn 3 init is off.
  21. kavevester

    Wish Selecting amps/cabs

    Also in Axe discussion by mistake... Still spending tooooo much time investigating amps and caps now there are so many. (and thanks' for that) Could the Axe Edit maybe have some kind of profiler (inspiration - see file attached) where all the amps are stacked in order related to chosen...
  22. kavevester

    Selecting amps/caps

    Still spending tooooo much time investigating amps and caps now there are so many. (and thanks' for that) Could the Axe Edit maybe have some kind of profiler (inspiration - see file attached) where all the amps are stacked in order related to chosen selectable feature you would like to filter...
  23. kavevester

    Volume profile

    Thank's - that worked :-)
  24. kavevester

    Volume profile

    If I want a volume profile (Exp controlled) which goes 70% hi on the first 5% Exp movement it's impossible to setup using Start/Mid/End/Slope. Would be better to draw the profile. Can this be done in another way? I dont need the full range of the vol but still want to shut it completely down...
  25. kavevester

    Use of Control Switches

    Its just that I can set the state of these SW under controllers but why not just have the settings done in the AMP block turning them to what ever? What is the matrix for under CS per scene?
  26. kavevester

    Use of Control Switches

    Still dont get it. If I set my Input Boost to "on" when in scene 1 and "off" in scene 2 just by selecting this when switching between the two scenes it still keeps this setting when switching between the two scenes - so what is the different?
  27. kavevester

    Use of Control Switches

    Why set the state of ex. Boost or Bright Switch using per scene instead of just setting them when in the actual scene?
  28. kavevester

    Why are all the factory presets so bass heavy??

    Have the same issue and thought it was the guitars which I have changed picks on (LP 35 black beauty, Fender Master built and Suhr Standard). But then again I wrongly strive for to much treble so in the middle of getting used to less treble. But yes it seems as if I have to use both treble and...
  29. kavevester

    Delay spillover

    How to make the spillover working when the goto preset do not have preset block? Didn't think was necessary now it was trail from last preset..
  30. kavevester

    FC-12 second effect light change

    Yes it was to see one color for default, one for 1st effect and 1 for second effect. Guess this is not possible
  31. kavevester

    FC-12 second effect light change

    How do I set a third light when using 2 effects on the same switch 1= no effect active ex blue 2= first effect active ex red 3= second effect active ex green Can this be done and where to find users manual for the Axe Edit??????????
  32. kavevester

    Difference in vol (same scene and blocks)

    I have a preset where I have copied scene 1 to all. Copied block to all. Went through all params and could not see any difference in params still there is a little difference in level scene 1 to level scene 2. Can anybody find this error. Might be a Axe Edit error when doing all this copying...
  33. kavevester

    Rush Tom Sawyer intro preset

    Did you attach the AXEII preset? Cannot see it
  34. kavevester

    Rush Tom Sawyer intro preset

    Anybody come across this? Had it earlier for the Axe II but now have Axe III.. It's the synth part in the intro
  35. kavevester

    Different layouts on different presets

    Thank's a lot. Get studying
  36. kavevester

    Different layouts on different presets

    Really tried here and cant make different layouts on my FC-12 for different presets. Preset 1 contains a phaser and no pitch (make layout accordingly - ex layout 1 pre-made) Preset 2 contains a trem-pan and pitch (make layout accordingly - ex layout 2 pre-made) but no no If I have chosen...
  37. kavevester

    Global scales

    In setup/global scales I setup 1 semi when A is played but only works when I play Ab.. Anybody? Check in learn on in Pitch and it shows A so not out of tune. It's all half tone down. Another thing - how do I setup different interval for A1 A2 (A2 - the octave higher, should be another interval...
  38. kavevester

    Move factory caps to user section

    How do I move some of the factory caps to user section. Also is it possible to remove caps from the factory 1/2? They take up space and have to filter to the ones I like so might as well delete the others
  39. kavevester

    Where are the caps?

    When I pick caps from the block a list of U.XX.XX comes up. When I try to find them under manage caps its emty. What is the logic here?
  40. kavevester

    Mix on delay/reverb

    Ok thanks'. Gave a lot of knowledge on how this work..
  41. kavevester

    Audition factory caps

    How do I do that? Tried from within Axe edit now all 3 factory packages are installed and tried to open directory where the fulI update are stored but nothing works. I can audition caps on my drive (not installed and bought as single cap files) but not the factory caps. Makes it a lot easier...
  42. kavevester

    Mix on delay/reverb

    Struggling with the balance of these two. Delay I can control to my liking but not the reverb .. When I bring the mix up the dry signal fades to much instead of keeping its tension. Of cause its a aspect ration (the mix) but how to keep the dry fully intact and with pedal just adding the reverb...
  43. kavevester

    Digital mono delay block hiss sound

    Here is the sound. Checked taht no signal in the chain and output is below red. Can you hear it now?
  44. kavevester

    Digital mono delay block hiss sound

    Its in the delay trail and a part of the sound. Not background
  45. kavevester

    Digital mono delay block hiss sound

    Know its a little hot but still it doesn't do it with other delay types so there the systematics..
  46. kavevester

    Digital mono delay block hiss sound

    Axe III. Try this preset and hear the hiss sound from the delay block. It is only present using the digital mono effect. Change to digital and it goes away. Think its a bug in the Axe.
  47. kavevester

    FracPad III

    UI (user interface?) Do you think the user interface is better than the Axe Edit? Can you clearly select controls on iPad and which size iPad?
  48. kavevester

    FracPad III

    (Know there is a lot about this in different threads but didn't have the energy to read it all) Bought FracPad III and installed the Midi (yamaha) bluetooth interface. Tra la la everythings good but - Using my iPad mini I cant see s... When using iPhone is it the same layout? Can I use the...
  49. kavevester

    Exchange of blocks

    Hey. Anybody know where I can find block exchange? (like preset exchange) I like to tweak on block level and got some from G66 https://www.g66.eu/en/experience/videos-of-the-week But is there a place where lots of users share their block library?
  50. kavevester

    Alternatives to Atomic (passive in stead)

    Anybody have a super alternative to active Atomic CLR's? They are breaking my back carrying up and down and in and out. Therefore I want the best in passive speakers suitable for the Matrix Elements FRFR amplifier. What is cutting edge here?
  51. kavevester

    Slashes lick in live and let die

    Anybody figured out how to adjust the pitch shifter to sound like that? (the little part 1:46) Its a multi tone pitch shift something..
  52. kavevester

    Modifiers dos not work on separate channels

    Ok ... I wish....
  53. kavevester

    Modifiers dos not work on separate channels

    Ok I just realized something. When playing on channel A Ok that makes sense but not operational sense. I would of cause like to have one modifier window for channel A and another maybe for channel B. Is there a reason for it and can it be changed or is it just the way it is ? As of now I...
  54. kavevester

    Dark sounding presets

    Many stock presets sounds dark from the start. Know it depends on guitar but still. Others also hear that? Is it due to passive tone control settings? Feel like I have to drive the treble way up before it gets ok and bright on. Play on Fender with humbuckers on. Some please check if it sounds...
  55. kavevester

    Modifiers dos not work on separate channels

    I cannot get this to work. For the sake of the test I made scene 1/2/3/4 = channel A/B/C/D. Adding the modifier to Drive (Amp block) and setting in the modifier window scene 1(channel 1) to channel A and do so for the rest 2/3/4 - B/C/D. Scene 4 (channel D) is another Amp by the way but...
  56. kavevester

    Modifiers dos not work on separate channels

    Ok I'll check later.
  57. kavevester

    Amp characteristics lookup

    Ok thank you all.. I thought it would be like that but yes keep it small and don't look at all the Amps every time.. But at least Fractal could do a little bit of differentiation in the lo/mid/hi gain area.. But yes again I'll get much better at this doing it on my own one by one. (d... it :) )
  58. kavevester

    Modifiers dos not work on separate channels

    I have 2 amp blocks in two scenes on 2 channels. 1 on scene 1 (channel A) and one on scene 2 (channel B) I set modifiers on scene 1(channel A) - master vol/trim/overdrv. to ext. pedal 1. On the modifier page I set the channel to A. (so modifiers only active when channel A is selected/scene 1...
  59. kavevester

    Amp characteristics lookup

    What I have really wished for is some kind of graduation of the Amp block related to its characteristic. It takes a long time getting to know all amps and what they sounds like. I know about the Wikipedia list of all the amps, - still hard to remember the different sounding of them and I know...
  60. kavevester

    Modifiers and channels

    Ok there, - got it. Thank's :-)
  61. kavevester

    Wish Modifiers and channels

    Please stop the Axe from copying modifiers on one channel to another even when using to Amp blocks. I use modifier on Amp 1 for raising distortion. When switching to channel B - selecting Amp 2 (clean) the modifiers are still there from Amp 1.
  62. kavevester

    Modifiers and channels

    Is there another way to disable the modifiers I have set up for channel A Amp1 block not being also being active when switching to channel B Amp 2. The modifiers has nothing to do with that Amp block but still copies the modifiers from channel A (the font here is driving me crazy - bold, cursiv etc)
  63. kavevester

    Yek's presets for cover songs [updated: Oct 11 2023]

    In order to have the sound intended which blocks/controls do you people use? What I mean is that the guitars I use should be tweaked in relation to pick output, eq. or whatever.. What do you use to do this?
  64. kavevester

    Announcing Axe-Fx III Mark II

    That was quick I got the feeling of having the "old one" (MK1) .. Damn it's a irritating feeling but I do know the cure :) :) And who in gods name uses 1024 presets???
  65. kavevester

    Fremen Pink Floyd package

    Thank you all. I guess it's my fender (HHH setup) which gives me the darker sound. I'll test with my Suhr (dismantled at the moment) when its up playing again. It's the only thing (besides the speakers) that is a part of this. And the check of weather it is setup (the presets) correctly, as...
  66. kavevester

    Fremen Pink Floyd package

    I have team viewer and we were ready to go Fremen some days ago but we missed it. I just wanted to know that no one else had this issue and therefore me myself,,, maybe. I am using Neuman KH 120A speakers and or Beyer DT 1990 pro with a reasonable freq. response so I guess it's ok. I did send...
  67. kavevester

    Fremen Pink Floyd package

    Anybody tried this package of different PF presets? I downloaded it but it presets seems very dark and trying to find out why. I have tried Fremen before on Axe FXll with a similar result.. There is EQ everywhere and just thinking if I go ahead (already tried) tweaking here and there and...
  68. kavevester

    Relative tuner setting

    Yes if I want to play along some song it might be off pitch and therefore relative tune to that. Just easier if the scale on the screen also could be calibrated to this new "A" :) Would be quite easy to do.
  69. kavevester

    Relative tuner setting

    More than once a day I tune to some songs that is some what of pitch in relation to A (440hz). I dont own the Axe3, yet, but is it possible to "set" the tuner to tune with an offset? Otherwise it could be a nice feature to have button that sets the meter to this new offset still showing 12...
  70. kavevester

    Modeling on/off impact

    Thanks chris
  71. kavevester

    I'm asking for help

    1. Set input value in I/O menu so that the red light on the front panel of the Axe goes red more than often when you play the guitar hard. 2. Might be that the guitar you are playing on have some , sorry , shitty pick-ups for heavy. Not hot enough (not output enough - typically single coils, use...
  72. kavevester

    Modeling on/off impact

    If I don't use a cap block should the cabinet modeling in global menu be off or what impact dos it have if not? Same question for amp block and modeling on/off. Why have this in the global menu? Thinking if I use amp block amp modeling is set on and if I use cab block cab modeling is set to...
  73. kavevester

    Mike Rutherford/Genesis sound

    Ok ill try them
  74. kavevester

    IR for the bridge pickup

    Good question. Haven't try actually .. Sorry for the long time it took to answer :-)
  75. kavevester

    IR for the bridge pickup

    Have this fine Suhr standard custom with a humbucker in the bridge position. The other two are single coils. The different switching from the bridge to the single are to great meaning that the treble from the bridge is to high and glaslike. I have scrolled through all the IR's of Axe and also...
  76. kavevester

    Mike Rutherford/Genesis sound

    I'm starting Genesis Revind band and this is from scratch so first of all I need to (as guitar player) to get close to Mike's sound. Is there any basics I need to know before fine tuning the FX's? Is he playing with both clean combined with chrunch sounds (2 amps) or what is his ideal setup? Dos...
  77. kavevester

    Save pitch settings

    Yes thought about that but have to change a lot when having new ideas to setup of the presets. Know I can do a lot with the global block linking but it seems as if getting something here you have to leave something there right!? :) And yes of cause the 3rd (minor/major and the same with the...
  78. kavevester

    Save pitch settings

    Yeah I know but used all my preset space (also need IA's) so just short of preset buttons. And I'll have to do that every time I have a new key so hoping for a easy way and a more logical one. Know the vol+ and vol- actually saves the setting after sending one of those CC's (dont know why...
  79. kavevester

    Save pitch settings

    Is there a way to actually store the learned key in the pitch (custom shift)? Meaning when I teach the pitch in a preset I want the key to be saved, on the fly, to have the same key when returning to that preset… I did it some time ago by having FS-6 switch 1 set to vol+ and switch 2 to vol- so...
  80. kavevester

    Levels

    Ok thanks..
  81. kavevester

    3 stages of volume

    Yes right about the scenes but dont use them cause I need to control these levels fast in different songs (different compression, gain, instruments etc.) Hmm I know others can live with what is so I just a little nerdy about this issue. Used to use the output level + and - with two FS-6...
  82. kavevester

    Auto initiate switch status

    Ok try a little more with CC#52. Yes it is type "hardware" but do not "remember"/read the switch output of the FS-6 when switching preset.. Hmm it actually works now with sending the CC#52 and dont know why it didnt yesterday but who cares.. Thanks :)
  83. kavevester

    3 stages of volume

    I have setup 2 boss FS-6 switches to add increase of volume in 3 stages by using NULL filters. Filter 1 on = vol 1 Filter 2 on = vol 2 Filter 1+2 on = vol 3 Is there a more simple way to do this (not using the boost hence I cannot control the level on this) now that I'm using two filter blocks...
  84. kavevester

    Auto initiate switch status

    Ohh yeah forgot to say that FS-6 is connected to MFC-101 Switch 1 input and switch is sending CC# 52 to the Axe. But how can the external controller control the Filter bypass on/off?
  85. kavevester

    Auto initiate switch status

    I have these Boss FS-6 to enable NULL filter (for volume purposes) and they are set (on the switch) to latch so I can see status on the switch - red led light. But when I change preset I would like to trigger the selected preset with the status of the switch - so if it is on the status should...
  86. kavevester

    Turn both delay and pitch on

    Ok thanks Bakerman. I do not use scenes but yes could go that way.. Thanks
  87. kavevester

    Turn both delay and pitch on

    at the same time. How is that done. Want to have the delay be active when pitch is active and from the same button
  88. kavevester

    Levels

    Ok
  89. kavevester

    FX send noice

    Sorry for not answering but got rid of the Mesa...
  90. kavevester

    Mute the output

    How has the best way of muting the output to total silence. Want to use switch on the MFC101 to do this. The bypass only, well bypass effects but no silence..
  91. kavevester

    FX send noice

    I try to setup a preset that goes to the two Atomic caps for the wet FX signal and the dry via a FX send to a Triaxis -> power amp -> 2*12 speaker. (nothing on the FX return on the Axe) So the FX loop block is placed in the start of the chain just taking the input signal directly to the FX...
  92. kavevester

    Levels

    Should the level knob on the Axe (front panel) act as a master volume just as master v on the amp block? Did a gig where the P.A. front man said I had to turn the output of the Axe waaaay down like "quater to" position. I just think it did something to my sound and the boost level where...
  93. kavevester

    Redbox XLR output to Axe input

    Little confused about the redbox (Huges and Kettner Grandmeister deluxe). If I want to send this signal to the Axe I must make a cable turning the balanced into un-balanced right? Then put into instrument in or FX return right? If I use instrument in is the same but cannot swap the block...
  94. kavevester

    Wet Dry Wet layout

    I've falling in love with a Hughes & Kettner Amp deluxe 40 but still depended on my Axe/2*Atomic active wedges. Now a have the possibility to test this wet/dry/wet setup. So is it like this? : The two atomics runs the normal output of the Axe left/right. Then I will feed the tube amp with send...
  95. kavevester

    IR trouble? Forget all the commercial IRs... !!!

    I have also bought a s... load of IR's and very few are worth the money. 99 percent is strange sounding (dark/hissy etc.). Please share these IR's you have made... :)
  96. kavevester

    Wet/dry/wet setup

    Searhed a little on this issue but didn't find much so dos anyone have experience with such a setup. I've falling in love with a Hughes & Kettner Amp deluxe 40 but still depended on my Axe/2*Atomic active wedges. Now a have the possibility to test this wet/dry/wet setup. So is it like this...
  97. kavevester

    Midi from Axe to Triaxis

    Guess not. D... :) And then again.... Midi is connected from the Axe midi out to Triaxis midi in.. As I wrote when changing preset on the MFC the Triaxis do change preset so some midi message must be sended from the Axe right? So it's just strange when changing either in Axe Edit or on the...
  98. kavevester

    Midi from Axe to Triaxis

    Now and then I enjoy the sound of a classic piece of pre-amp, the Triaxis :-) Plugging from midi out on the Axe to midi in on the Triaxis both on channel 1 and nothing happens when spinning the Axe preset select knob, nothing happens when changing preset in Axe edit but it works fine selecting...
  99. kavevester

    Intro to "Hear about it later" with Van Halen

    Such as nice chorus/flanger tremmolo kind of clean guitar in the start and + gain through out the rest. Anybody have something close to this?
  100. kavevester

    3 vol levels

    Yes actually I also thought about making one my self. 5 preset buttons (5 vols) 1 + and 1 - (autosave) to on the fly changing 1 of the 5 vol presets... Maybe we have a good idea here and also very secret one :) :)
Back
Top Bottom