Search results for query: *

  1. V

    Connecting two cabinets in FX Loop

    You need to be a ittle more specific if you mean the digital FX Loop or the physical Output 2 on the Axe. If you mean Digital....you won't need an FX Loop. Do simply what is shown in the picture and pan the Amps and Cabs hard Left and hard Right.
  2. V

    Audio stutter

    Does it happen without a computer connected? Tried a different PC? Reinstalled the USB Driver yet?
  3. V

    Audio stutter

    Hey there, Where's your CPU usage sitting at? Is the unit well cooled?
  4. V

    Am I being unreasonable?

    Hi guys, sorry for stepping in but I would like to take a different route on this one. What is the problem in the first place?!? You're saying you're having trouble programming the MFC and that it has something to do with the power supply. But does it? What IS this problem? Perhaps we can help...
  5. V

    Axe-Fx II & Rocktron Banshee 2 Talkbox

    Oh no. This is getting even more complicated than I hoped for. Think we will have to skype then. I'm in Germany...it's 11pm here right now. What's your time? Would it suit you if we skype tomorrow? At about 11 a.m. my time? Your from australi, right? If I'm not mistaken too badly that would be...
  6. V

    Axe-Fx II & Rocktron Banshee 2 Talkbox

    Sorry....this is going to be a bit lengthy :-D Why exactly would you want the Axe to come through the Banshee? Typically you wouldn't use it that way. Just Banshee into a Mic and the Axe as the normal Guitar-Rig. And then add effects to the banshee over the mic/Daw or FOH. Exept you want to use...
  7. V

    Axe-Fx II & Rocktron Banshee 2 Talkbox

    What a shame. I would actually try a different 9V Power adaptor first. Just for a few seconds. I would say it is the power supply Since that receives the wrong voltage directly. If that doesn't help...your Banshee itself has a problem. Good luck! I hope the cheap version is your solution :-)
  8. V

    Axe-Fx II & Rocktron Banshee 2 Talkbox

    It's a Banshee! It doesn't need amplification ;-) He also said it produces a white noise. So it has power. It is most likely the EFX Button (and send).
  9. V

    Axe-Fx II & Rocktron Banshee 2 Talkbox

    seems there's something wrong with your guitar, cable or the banshee itself. check everything without the axe. you don't even need the tube, since the banshee is a "guitar-amp" itself. TEST the following: ONLY Guitar and a Lead into the Input of the banshee. NO OTHER cable or equipment...
  10. V

    Atomic Reactor FRFR Wedge SIZES

    Hi guys, I need a little help. I currently do not have access to my Wedges but need the sizes to decide on a Case to buy. So could anyone who has his Wedges in range go about and check them for me? I found some in the manual but since there is no diagram with it I'm not sure if they are the...
  11. V

    Best way to A/B changes to presets on the fly?

    Buy a second AxeFx ;-P Sorry...couldn't resist
  12. V

    LCD Screen Problem

    I don't have lines in my display but my mkI also shows some strange display behaviour. It seems to lose it's displaying strength. I mean it kinda seems to lose it's contrast. And no...I am aware that the AxeFx dims the screen occasionally when it is under heavy cpu load but that is not what I...
  13. V

    Help

    Hard to help without details. What kind of PC? MAC? What operating system? Changed USB cable yet? (Btw...it is normal that the PC does not recognize the Axe without the driver) Try the following. Restart PC. Download the driver again Do NOT connect the Axe to the PC yet. Start dei driver...
  14. V

    Hold the line - Toto - Harmonizer Settings

    holy christ you just blew my mind with that post. I think I need to read that a couple of times over before I get the gist of it :-D
  15. V

    Hold the line - Toto - Harmonizer Settings

    Thank you very much for your help guys. I will try that out this week! You are great!
  16. V

    Hold the line - Toto - Harmonizer Settings

    Hi guys, I'm trying to build a proper Sound for my take on Hold the Line by Toto. I just lack the knowledge of music theory on how to setup the harmonizer properly. (Last part of the Solo) Could you guys help me out and perhaps teach me the theory of muisic on how to figure out the right...
  17. V

    Accidentally saved cabs to scratchpad

    Could you tell us how you did it? Just in case someone has the same problem in the future. ;-)
  18. V

    Is there an easy way to keep up on firmware updates??

    Seems like he's back :-) http://forum.fractalaudio.com/threads/sorting-out-the-high-end.117233/#post-1398890
  19. V

    Axe-Fx II "Quantum" Rev 1.00 Public Beta

    I just thought I'd Put it here just in case it might be a "bug" Gesendet von meinem HTC One M9 mit Tapatalk
  20. V

    Axe-Fx II "Quantum" Rev 1.00 Public Beta

    I almost thought it's due to the fast that Sound has priority over everything else. I think cliff himself said that somewhere. But I had some of my Patches at about 80% usage before Quantum and they were a little quicker then (fw19), so another hint that Quantum got more complex instead of...
  21. V

    Axe-Fx II "Quantum" Rev 1.00 Public Beta

    I played a gig this weekend and I found that the switching between Patches got a little slower. Not scenes. They were good. But going from one Patch to another Patch the Name of it in the mfc took a second longer to change . The sound switched quickly as normal. But the Display Name didnt...
  22. V

    Brit Floyd Presets

    Okay. Sorry mate. My biggie. Very sorry. So you could confirm the ones online are the only ones. I really thought there had been more. Thank you!!!!!! And again sorry for my mistake
  23. V

    Brit Floyd Presets

    If I'm not massively mistaken "The Wall" WAS online though. Can't find that
  24. V

    Brit Floyd Presets

    Sorry mate. Like I said...some are missing. Seems like they havecheer deleted. Where's the wall for example. That's why I asked if someone who has ALLot them might be so kind to upload them somewhere
  25. V

    Brit Floyd Presets

    It seems like some have been deleted from Axechange. Could someone post a Dropbox Link or something with the collected presets?! Would be so much apreciated!
  26. V

    copy out 1 to out 2 ? OTHER I/O Questions?

    Oh... alright. I'll check that! I thought that was some kind of Output Delay feature in case the FOH was a big amount later than the on stage monitors. Thank you! What exactly will I have to set it to?
  27. V

    copy out 1 to out 2 ? OTHER I/O Questions?

    Hi guys. I'm sorry I'm digging out this old post, but I am new to the Axe2 (converting from a Standard) I'd love to keep my setup basically the same (Output 1 to FOH and Output 2 to my Atomics) but I have a problem - I cannot seem to find the "COPY OUTPUT 1 TO OUTPUT 2" feature. Please help...
  28. V

    Waiting for Tuner Problem - MKI - Std

    Okay.....it kinda works. Thank you very much. I just don't want to have the tuner on 15. I want it on 17. But no matter what I do...I can't get it to work there. Although I set the tuner in the Axefx IO to 17 AND set button 17 to tuner on the mfc it won't work. A I am idiot? What am I doing...
  29. V

    Waiting for Tuner Problem - MKI - Std

    I have a Standard. The Realtime Sysex is set to all. I'll give your list a try tomorrow, but I feel like I have done these things a dozen times by now :-/ What's the "Standard MIDI CC" for the Tuner?
  30. V

    Waiting for Tuner Problem - MKI - Std

    Hi guys. I know this has been discussed loads of times but I just don't know what to do. The typical problem. I hit the IA16 (set to tuner in mfc setup) and the Waiting for Tuner message appears. All Realtime messages are on and all the I/O settings are setup correctly. I use a 7pin Midi...
  31. V

    MFC preset Tuner unwanted acivation help asap

    If you guys need any further info on settings etc, just ask. I have everything with me an can check what the axe or MFC are set to... And test your ideas at once. Gesendet von meinem HTC One mit Tapatalk
  32. V

    MFC preset Tuner unwanted acivation help asap

    Hi folks! I have a massive problem. I have been a standard user for about 3 years now. Used it with a voodoo lab ground control pro until I finally got a MFC two weeks ago. Everything worked fine until now. I'll be having a gig this Saturday so I really need help. Asap :-( Without any reason...
  33. V

    I don't want you to switch just yet

    OMG I'm so embarresed right now. I just didn't kno what that was so I left it at current. Time to read the manual a little better :D Thank you @jjozwia
  34. V

    I don't want you to switch just yet

    Hi guys. I'm very sorry if my folliwing question had already been answered elsewhere, but the forum and community is growing so fast I can't go through every post the search shows me. I just got m MFC MKI last weekend. So I'm totally new to it. Hooked it up to my Axe Standard and went...
  35. V

    Let's see your live Axe-FX setup

    I feel like I am the last Standard user left :D
  36. V

    cant get any feedback - jcm800

    Hi Guys.... Sorry I didn't answer earlier. Caught up in University. No time for music at all. Finally I can noodle around with my precious Axe again :D Now...I tried turning the Atomic Amp up even more...that works fine. But it just is too loud. Another problem is now that I get these...
  37. V

    cant get any feedback - jcm800

    Well thats pretts subjective :-D I think I play really loud. But don't tell my bandmates. I tell them I'm not :-P no honestly. I am loud. But even if I hold my pus right in froknt of the speaker the only thing that feedbacks is the tweeter and that's not nice at all. I tried a trick I read here...
  38. V

    cant get any feedback - jcm800

    Hi guys. I need a little help with my standard. I finally found a sound that can handle any song or sound I like. The only thing the bothers me is that I cannot get any feedback. Effects off or on does not help. The only thing that helps is my trusty boss od in front of the axe but I Don't...
  39. V

    Dann Huff Giant Sounds FW11

    Hi there! I wondered if anyone had a proper Dann Huff Sound. The only one I found works on an old firmware and I cannot open it via AxeEdit. DANN HUFF- Instructional dvd-Studio work - Guitar technique /PART 3/ Stay - YouTube (Stay) DANN HUFF- Instructional dvd-Studio work - Guitar...
  40. V

    scintillating patch trouble syncing. when does the pattern start?

    Hey Guys! My band wants to play this song too now, but I have no idea how to set the filter or multidelay. Do you have an idea on how to set it on the axe Std? A Screenshot would help! THX! I thought about assigning the filter to my expression pedal.
  41. V

    Axe Std with Rocktron All Access

    Awesome! So just the same cons my Voodoo has too :D Thank you very much! Very helpful comment! Do you have any idea why some pedals won't work? I mean....its a simple jack and a pot, right? why should there be any problems? Thank you mate!!
  42. V

    Axe Std with Rocktron All Access

    Hi guys! Has anyone made any experiences with the mentioned combination or the All Access by itself? I am currently working my Axe Std with a Voodoo Lab GCP but would like a few more buttons. Got an eye on a All Access but would like to know if there are any issues btw the Rocktron and an...
  43. V

    Entre Dos Tierras / Heroes del Silencio Patch

    Hi there!!! Could somebody send/make/share a patch for Heroes del Silencios's ENTRE DOS TIERRAS!? Or perhaps tell me what the settings for a Stereo Delay for that Song would be?! Thanks!!!! Little note: Need it for AxeFx Std.
  44. V

    Control AxeFx via Line6 FBV MkII through (CAT5) Line6 Spider Valve to (MIDI) AxeFx

    Sorry....No effect. Tried that already...should have written that!! I might have forgotten to setup something in the I/O?? Unfortunately Í am not able to tell you my settings....Axe is in my practice room and I in the university. Thank you for your first help anyway.... Can you explain what the...
  45. V

    Control AxeFx via Line6 FBV MkII through (CAT5) Line6 Spider Valve to (MIDI) AxeFx

    Hi guys. Hope you can help me. I do not have the money to get a Voodoo Lab Ground Control or MFC-101 yet. So I am forced to use my Line6 Stuff a little longer. I will be having a gig this Saturday...and I would LOVE to use my AxeFx right away (only got it this week) My idea was now to...
Back
Top Bottom