Search results for query: *

  1. A

    FM3 Firmware Version 6.00

    Yes, worked for me anyway
  2. A

    FM3 Firmware Version 6.00

    This worked for me... Manually went in and saved the ~ 10 regular presets I use. Can now switch between these 10 back to same speed as FW5. Other presets have the lag but nothing major as don't jump to them.
  3. A

    FM3 Firmware Version 6.00

    Thanks - dumped all to PC thru Fractal bot and loaded them back in. Not actually sure it made it any faster to be honest? Maybe Also I had tried the "Update all Presets" yesterday to try and speed things up that way but it froze @ preset 349. Didn't retry again. Anyway ...sounds good
  4. A

    FM3 Firmware Version 6.00

    Wouldn't say MASSIVE, but noticeable over FW5. Not a show stopper as most commented - wouldn't usually change preset mid song. thanks
  5. A

    FM3 Firmware Version 6.00

    Have noticed this also and thought it was just me. Lag between preset changes (sound changes), scenes/channels switch faster. Axe Edit unplugged also. Great update - thanks FAS
  6. A

    Let's see those FM3 rigs!

    Hi, Temple audio Design - DUO17 (added the 4 bay patch to side, couldn't get the mini power module, not in stock for 8 weeks on Thomann) FM3 - screwed on with M3.5 * 20 Line 6 G70 Relay - stuck using temple audio medium plate Dunlop - mini - stuck using temple audio medium plate voodoo power...
  7. A

    Wah - always on when pedal not connected

    thanks very much lads. All working good without pedal.
  8. A

    Wah - always on when pedal not connected

    Hi, Looking for bit of help… I have Wah setup as Auto-engage (TRS lead, Pedal 1 o/p, Mission SP-1) on AX8 and works perfect. However - when I don’t have the pedal at some gigs, the wah is always engaged at 100%. I have changed "Ext Ctrl1 INIT VAL" to 0% but no difference, and then to 100% no...
  9. A

    Wish MIDI block

    Ability for AX8 to send CC
  10. A

    Can the Disaster Area dmc4 recall presets on AX8?

    Just ordered MC6. Looks like very good device and excellent support on any questions.
  11. A

    Another vol/wah on sample pedal question

    thanks lads
  12. A

    Another vol/wah on sample pedal question

    Hi, Quick question - think I have the answer. If I set PEDAL 1 (SP1) as global vol across all presets, then I can't use the same pedal to control vol/wah on individual presets .....using the usual MFC way - ie bypass wah/un-bypass vol block on individual presets To use vol/wah on single pedal...
  13. A

    Can AX8 stop start Reaper playback?

    Thanks all for the info – going to abandon ship on this I think. No CC send on scene make its more tricky – so need to change preset every time I want to send a PC. Hoping that the AX8 gets some more MIDI functionality in future updates. Unfortunately - the small typos/details in the...
  14. A

    Can AX8 stop start Reaper playback?

    thanks for info - checking out this option Moke. I downloaded miditranslator (using the AFX II as MIDI-USB interface to laptop for now) and the incoming part looks ok what do I set the MIDI out device to be, so that reaper can use this as an input? Any idea on what the output format should...
  15. A

    Can AX8 stop start Reaper playback?

    thanks for the info - unfortunately I don't really know a lot on the MIDI side...... I'm guessing Reaper needs CC and not PC? Page 81 of manual has this? I/O: CONTROLLERS PAGE The CTRL page of the I/O menu allows you to map PEDALS or MIDI CC# messages to various AX8 functions. CC# messages...
  16. A

    Can AX8 stop start Reaper playback?

    Oh dear :-( I took this comment to mean it would do what I wanted but I might have miss interpreted it! http://forum.fractalaudio.com/threads/ax-8-price.105021/page-14#post-1257591 lets see if Joe can work some magic!
  17. A

    Can AX8 stop start Reaper playback?

    Hi, Can the AX8 stop/start playback on Reaper? I understand AX8 its not an audio interface but thought it can do this These are the steps I use on AXE FXII & MFC to do this. Set IA switch number 8 is set to "none" on MFC so its free for Reaper function I don’t use any special MIDI mapping...
  18. A

    thanks very much for the patch

    thanks very much for the patch
    • alan11
    • Profile post
  19. A

    thank you much appreciated

    thank you much appreciated
    • alan11
    • Profile post comment
  20. A

    Coldplay - Adventure of a lifetime

    Hi, Learning guitar intro rift on Coldplays "adventure of lifetime" and trying to replicate guitar tone (presume it’s a guitar). Any ideas or pointers to the effect that seems to be used or something close on Axe FXII? Must learn rift first :-) thanks
  21. A

    Bug? possible bug 18.11 [FIXED]

    Hi, this is a screen grab from utility menu. Reloaded the firmware and did system reset also. Any ideas? thanks
  22. A

    Bug? possible bug 18.11 [FIXED]

    Hi, *possible* bug...could be just me when you go to the "Fetch backup preset" on the Utility menu, you can't scroll and pick a preset, can only hit enter. but you do have the option one the lines above "restore factory bank". presume when the new additions were added to the Utility menu...
  23. A

    Controlling Volume and Wah with the Same Pedal

    Hi, this helped me also http://forum.fractalaudio.com/mfc-discussion/41968-mission-sp1-vol-wah-same-patch.html
  24. A

    Yek's Presets for MkI/MkII (v15.03) and Blog

    thanks Yek - "I/O INSTR IN at 2%" did bother me a bit because its so low but I didn't hear a significant difference in tone and it "seemed" like it cleaned up the amps. I will go back and check....and the GEQ2 with level increase thanks
  25. A

    Yek's Presets for MkI/MkII (v15.03) and Blog

    Hi Yek, First off thanks for all the knowledge sharing! Question on the Humbucker /single coil level adjustment – adding Null filter at start. I play PRS/Gibson humbuckers and the output is very hot, I have global amp gain @ -2dB, I/O INSTR IN @ 2% and turn down input drive/trim etc on the...
  26. A

    MFC MIDI support

    Resolved!!! Win7/64bit/driver problem. Reading the fractal bot guide - it says that when you select Axe FXII it automatically identifies the ports - well mine didn’t. So even though Fractal bot working and Axe edit working the driver may not have been installed exactly correct - if that’s...
  27. A

    MFC MIDI support

    Hi Karma, attached is screen grab from MIDI -OX I pressed IA8 twice.
  28. A

    MFC MIDI support

    Thanks "Flyingmd" for the input - I will try a reset of MFC later but have few custom Vol INCR/DECR etc and they will all be lost so need to remember all I changes before I wipe it. Karma - I uninstalled reaper and put back on the old version that was working but same problem. I have older...
  29. A

    MFC MIDI support

    Hi, I use the MFC to send CC message to Reaper to start/stop playback of backing tracks. This worked perfect until I tried it this morning. Quite few things have changes since it last worked and I can't root cause the issue. The problem: Reaper no longer recognises the actual CC number -...
  30. A

    Stop/Start mp3's on laptop using MFC101

    thanks - I got Ableton Live 9 (free trial for 30days) and was able to get the MFC to stop/start a single track. Will work on combining into one single and set markers. You run out of foot switches on the MFC quickly enough mind you if you need to assign more functions. Didn't try reaper.
  31. A

    Stop/Start mp3's on laptop using MFC101

    Hi, I’m not very well up on DAW and MIDI but thinking about a 1-man setup using backing tracks. I would have mp3 backing tracks on windows laptop. Gear would be: AXE FX II, MFC101, PA, mic, guitar MFC connected to Axe FX via cat5 cable and Axe FX connected to laptop via USB. AXE FX o/p...
  32. A

    Wireless system for Axe FX II - Any recommendation?

    Line6 G90 working perfect here
  33. A

    The new amps don't show in Axe Edit

    A new version of Axe edit is on the way that will have all the latest updates and in sync with version 8
  34. A

    wah always engaged when patch first loaded

    thanks very much for the help :-P
  35. A

    wah always engaged when patch first loaded

    yep just read my 1st post ..."you said CC11 and CC12" ...was bit confusing :? Anyway got it going from what you suggested. I disconnected Axe edit and the MFC and just worked on the front panel (was getting confused in axe edit) I had both the bypass of the vol/pan block and the wah set to ext...
  36. A

    wah always engaged when patch first loaded

    thanks very much - bit of progress. Begin function on XP2 was Off, I changed it to PDL and it works fine now for the wah/vol patch (it starts on vol, wah is not engaged, well actually you can hear wah engaged for ~1 mS then it knocks off). Side effect: when I switch on the II for the first...
  37. A

    wah always engaged when patch first loaded

    Hi, I have this little issue where the wah is always engaged on a preset where I have the wah block in the chain. I'm using Mission SP1 as a vol control on 99% of my presets but there are a few presets where I use it for both vol & wah. On these patches I would like the vol to still be the...
  38. A

    Tuner Jitter

    I find more jitter also, jumping alot on low Es (standard tuning) on my guitars. I know Cliff put alot of work into the tuner for 6 .......will check the pickup/vol/tone recommendations above to see if that helps.
  39. A

    I want to print the new 6.0 owners manual but....

    I used a txt diff program (Beyond Compare) to compare the two manuals to see what was different - helped to just hightlight new sections/edits. Wouldn't really help for priniting pages though. Alan
  40. A

    wah and volume?

    Hi, this might help http://forum.fractalaudio.com/mfc-discussion/41968-mission-sp1-vol-wah-same-patch.html
  41. A

    Mission SP1-- need to step three times to engage switch

    Hi, have the exact same thing myself. 2-3 times before it kicks in. Didn't get round to debugging it - presumed it was something I have setup wrong...PC RST or reset..whatever it is called.
  42. A

    The "Main" parameter in the Output tab...

    thanks Sebastian yes I have a seperate boost IA that control both op1 and op2 together. I use the INCR/DECR to try and set the overall levels of all my patches on the fly. Was so sure it used to work - I must have routed things differently either hardware or in the axe fx grid. Alan
  43. A

    The "Main" parameter in the Output tab...

    Hi, Just wanted to check if this was normal. From the manual it says the “main parameter” in the Output tab “sets the overall level of the main mix for the selected preset” I use the INCR/DECR mapped to two IA switches to control this and it works perfect on OP1. It also works perfect on...
  44. A

    Configuring Mission SP-1 with AXE II and MFC101

    Wiki has good info and this post helped me also. http://forum.fractalaudio.com/mfc-discussion/41968-mission-sp1-vol-wah-same-patch.html
  45. A

    Mission SP1 Vol & Wah on same patch.

    thanks Bakerman - just got time to revisit this tonight. Works a treat Alan
  46. A

    Mission SP1 Vol & Wah on same patch.

    Hi, I'm trying unsuccessfully to get the Mission SP1 working correctly (well the way I’d like it to) with the Axe II & MFC101. I’m using TRS cables. Checked the Wiki and previous posts but still abit lost. The functionality I’d like… I use the pedal for vol on 90% of my patches. I...
  47. A

    Post Your Rig!

    Heres mine: output 1 direct to PA, output 2 to Matrix -> EV SX300 on stage. MFC101 & Mission SP-1
  48. A

    Mute O/P 2 only if both O/P 1 & 2 assigned same CC#?

    Yes - thanks Bakerman. I just wanted to avoid having to add effects loop block to any presets I make/edit. I'm finding some of the presets are good to go straight off without edits. Copy OUT 1 to 2 is very quick/easy and global. thanks
  49. A

    Mute O/P 2 only if both O/P 1 & 2 assigned same CC#?

    Hi, I have assigned o/p 1 and o/p 2 both to CC#11 (this is so I can control master vol on both with expression pedal). I run o/p 1 to FOH stereo and o/p 2 to matrix amp and EV SX300 for stage. Is there a way I can mute only o/p 2 with an IA switch (want to be able to hear FOH sound...
  50. A

    Axe-Fx II Firmware Version 2.00 Up

    Hi, new user here so apologies if this is a simple dumb task... I successfully updated firmware to 2.00b using Axe Edit, but how do I update the presets?. I downloaded the 3 .syx files for the 3 banks onto my PC. thanks
Back
Top Bottom