Search results for query: *

  1. Erik Hammero

    FM3 Firmware Version 7.00 beta 1

    i had the latency last night. Then shut it of and got some sleep. when starting it up again this morning I still experience a tiny bit, but it is A LOT better. Have no idea what's going on. After I loaded the firmware I did the "Refresh after new firmware" a couple of times without any...
  2. Erik Hammero

    FM3 Firmware Version 7.00 beta 1

    I have the same.
  3. Erik Hammero

    Bug? Different EQ values in Amp block GEQ AX8-Edit/AX8

    I dont know but my guess is that its the same. In that case its wrong on the AX8 and not AxeEdit.
  4. Erik Hammero

    Bug? Different EQ values in Amp block GEQ AX8-Edit/AX8

    The 8 band GEQ values in the amp block are different between AX8 and Axe Edit. Axe Edit reads 63 125 250 500 1k 2k 4k 8k and on the AX8 it reads 80 160 320 640 1250 2500 5000 10k Its only on the 8 band. The other types are ok. But I must admit that that I dont know if the error is on the AX8...
  5. Erik Hammero

    Different EQ band values on AX8 and AX8-Edit

    Posting my reply from Facebook: I did a reinstall of both Axe Edit and the AX8 plus that I took a refreshing of Axe Edit with no luck.
  6. Erik Hammero

    Different EQ band values on AX8 and AX8-Edit

    The 8 band GEQ in the amp block states different values on the Ax8 than in Axe Edit. If I want to raise for instance the 1000 band in Axe Edit the same band reads 1250 in AX8. I did a clean reinstall of both the Axe Edit and the AX8 yesterday and its still the same. All the frequensis in the 8...
  7. Erik Hammero

    Axe Fx sounding better with FracPad?

    I don't know if this is the right place for this, but I couldn't find any other place that would fit better. I have been using my Axe Fx II XL with both Axe Edit and Fracpad. Is it my imagination or does the amps and distortion pedals sound better with FracPad? The only reason I can think of if...
  8. Erik Hammero

    Define"open"

    To me it's like a thing that can't be fully explained but "I recognise it when I hear it". A thing that must be experienced to fully understand. Like when I'm out to buy a jacket. I don't know exactly what I'm after but I know when I see it. Matt's description was maybe the closest.
  9. Erik Hammero

    Why do downloaded user presets sound different on my set-up?

    Making the power amp (Matrix) work harder than it did at first when the master on it was low, as I wrote in the my post. But dont let this her into an argument about what my experience was or was not. That wont bring anything new to the table. If you mean that my experience was wrong, thats ok...
  10. Erik Hammero

    Why do downloaded user presets sound different on my set-up?

    I know what that curve do. Its more to it than just FM.
  11. Erik Hammero

    Why do downloaded user presets sound different on my set-up?

    I have a Vox AC30 Brian May Spesial Edition stored at mye place for a friend. Out of courosity I fired it up to hear what the real amp sounds like. I didn't turn it up very much. A little over speaking volume. It was punchy and glorius as F......! So I turned on my Axe FX, put on a AC30, turned...
  12. Erik Hammero

    Using Axe Fx as attenuator with tube amp

    One of my setups is running the AFX 4CM with my 100w tube head and, as always, there is this problem that it's getting to loud for home use. I discovered that if I just turn the volume of the Fx loop block down the the volume drops to whatever you want it to without messing with the input gain...
  13. Erik Hammero

    Underrated Amp Models

    I have done that to almost every amp with great results too. ☺
  14. Erik Hammero

    Do I have to reset my amp models,cab models and effects models

    I would back up everything and load the presets back in afterwards.
  15. Erik Hammero

    Do I have to reset my amp models,cab models and effects models

    Definitely do it. I had mine for three years without doing a full reset. I was selling it and did a full reset for the new owner. After everything was done I was just going through it to make sure everything was ok, and I was blown away of the difference before and after. I have now learned the...
  16. Erik Hammero

    New and free! Re-captured Carvin Legacy VL212 G12M CabPack – RNDI version

    I have played through both the Legacy 1 and 3 with various cabinets and I thought it sounded great. Then I had the opportunity to play them through a Legacy cab and that really blew me away. It is something really special about the Legacy cabinets that I haven't heard with other cabinets. So I...
  17. Erik Hammero

    Poll What FW is on your AxeFX II/XL/XL+ right now?

    Actually, my Axe Edit say FW21...
  18. Erik Hammero

    Dephase control in cab block question.

    In my experience, some IR's doesn't benefit from using the de phase while some do. Depends on the IR itself.
  19. Erik Hammero

    Pit gig in ears, no monitor, lead sounds

    I dont know if I understand you correctly but I got much better In Ear sound after I ran the monitor signal through the Axe Fx so I could use whatever effects (compressors, EQ...) I want to to make the In Ear sound better. Sorry if I'm answering on something else than you ask. :mrgreen
  20. Erik Hammero

    Touring with Axe Fx, what to bring?

    I won't be messing with any updates while I'm on the road but would it be wise to have a spare boot rom? Have read that some have gotten into some trouble with the PSU but is that a thing I also should consider, you think?
  21. Erik Hammero

    Touring with Axe Fx, what to bring?

    I'm doing a good bit of touring with my AF2 MK1 and wonder if there is something like "spare parts" I should bring? I have it in a shock rack with a power conditioner but should I bring like an extra PSU or an extra Eprom? Or? I use a cat5 cable with the MFC and will bring double of all cables...
  22. Erik Hammero

    Axe-Fx II XL with Ground Control Pro by Voodoo Lab

    ^ Just like nccarg says... I tried that with a GCP myself but wont work.
  23. Erik Hammero

    Scenes Set-Up Scenario Question

    Yes. If I understand you correct. You can assign a IA switch to control Amp X/Y and in your scene switching you just don't switch between the X/Y amp, just let it stay on for example X through all scenes.
  24. Erik Hammero

    MFC mk3 help

    Is the Axe Fx midi channel set to Omni? Of so, try to set it on midi channel 1.
  25. Erik Hammero

    Secondary PC# to IA switch

    *SOLVED* I see now that my question was "wrong". Yek is (of course) right when he say that its not possible to add another PC# to a IA switch. What I was after was actually what Moke said. I wanted to make another unit switch preset when I change preset on the Axe FX with the MFC. I added a PC#...
  26. Erik Hammero

    MFC re-map

    This was exactly what I was about to ask also! :-)
  27. Erik Hammero

    Secondary PC# to IA switch

    That sound like what I'm after. Will try it out soon. Thanks.
  28. Erik Hammero

    Secondary PC# to IA switch

    Thanks! I will try that.
  29. Erik Hammero

    Secondary PC# to IA switch

    I see. What will be the best way to control another unit together with the Axe FX with the MFC-101?
  30. Erik Hammero

    Secondary PC# to IA switch

    I cant figure out how to assign another PC# on another channel to for instance IA switch 1. What I want is that when I press IA1, preset 1 on the Axe FX is loaded on midi channel 1 and I want it to also send PC#1 on midi channel 2 to another device for preset change. I'm sure it is described...
  31. Erik Hammero

    Beyond me

    Made this for my wife to her birthday using backing track. Listen to Beyond Me by Erik Hammero #np on #SoundCloud http://soundcloud.com/erik-hammero/beyond-me
  32. Erik Hammero

    Cab block mic placement.

    When a, let's say, SM57 is engaged in the cab block where according to the speaker is it placed?
  33. Erik Hammero

    Sending In Ear signal through the Axe Fx

    Just using the OUT 2 EQ. :-)
  34. Erik Hammero

    Sending In Ear signal through the Axe Fx

    I will isolate the monitor signal from the guitar signal so it will work as two totally independent signals inside the Axe Fx. The signals wont interfere with each other. Its not the levels that is the most important thing here, its the EQ. A stomp box will most likely work but I'm running...
  35. Erik Hammero

    Sending In Ear signal through the Axe Fx

    I'm using domes. The best would have been to have a pair of high end buds with custom molding, but until then... :-)
  36. Erik Hammero

    Sending In Ear signal through the Axe Fx

    Yeah, the cost of the buds make a major difference. I will in time get buds in that price range but in the meantime I need to EQ some frequensis out and some in.
  37. Erik Hammero

    Sending In Ear signal through the Axe Fx

    No, the In Ear buds work differently than the FOH speakers. I have tried it and it just dont work. There was a post from Metallicas tech on the forum recently and he also say that the In Ear need another EQ than FOH. An EQ that works for the FOH speakers isn't the same as the small In Ear buds...
  38. Erik Hammero

    Sending In Ear signal through the Axe Fx

    Today I'm sending the whole FOH monitor signal through a small, external mixer before it gets to the my In Ear system for a bit of EQ and easy-to-reach levels. Instead I want to send everything through the Axe Fx for EQ and levels before it gets to the In Ear. Maybe I misunderstand what you are...
  39. Erik Hammero

    Sending In Ear signal through the Axe Fx

    I'm thinking about sending my monitor signal from the mixer through the Axe Fx to make use of the equalizers in it at the same time I'm using it for my guitars. Monitor signal out from the mixer to In 2 Left/Right, setting up a row just for this signal and send it out again through Out 2...
  40. Erik Hammero

    General Discussion: How do you compensate?

    Would you mind tell me a bit more on how you do that split? I would really love to be able to split it that way because when I dial in the sound for FOH it doesnt sound good in my In Ear and when I have killer sound in the In Ear it doesnt sound very good in the FOH.
  41. Erik Hammero

    Anyone successfully emulate a double tracked guitar?

    I dont have a link for you but I belive its in Bank A in the stock presets wich you can download from Fractal website.
  42. Erik Hammero

    Axe-Fx II Firmware Version 12.04 Public Beta

    I believe so. :-) But when I loaded it the whole box was deleted. Totally blank. It doesnt matter for me since my presets are pretty straght forward. Actually it was a lucky strike so I can start on scratch with this update. But if you have a ton of presets, take a BACKUP before loading. :-)
  43. Erik Hammero

    Anyone successfully emulate a double tracked guitar?

    Check out how the "Petrucci Rythm" preset is made.
  44. Erik Hammero

    laptop just died :( now the question is mac or pc? to use w/axe and for recordings

    I went from PC to Mac this year. Although I was very interested in buying a Mac in the first place, the main reason for me was that everyone around me in the music/studio business are using Macs so I saw a big + in using the same platforms/programs as them. Both for sharing and help. Been using...
  45. Erik Hammero

    Best backup solution for Axe FX?

    I went for the newest Vox Tonelab. Of course not as good as the Axe but better than the rest in my opinion. Small, easy to carry around.
  46. Erik Hammero

    Engl Powerball structure vs Engl Screamer

    Comet?? That would be a new experience for me actually. I'll check it out. :-)
  47. Erik Hammero

    FW11 'playability'

    Yeah, I found that to. I'm actually very happy to see that this have appeared to more people than me so then it cant be the placebo effect. :-)
  48. Erik Hammero

    Engl Powerball structure vs Engl Screamer

    But its actually not a big deal. There is plenty of other amps to use. I just wondered if someone knew if they are similar or not.
  49. Erik Hammero

    Engl Powerball structure vs Engl Screamer

    But if the Engl sim in the Axe is much more compressed than the Screamer seems to be, the Bright switch wont make it uncompressed? Or?
  50. Erik Hammero

    The history of Axe Fx so far.

    In the light of FW11 that I REALLY love and that I guess the forum have new users I take the liberty to bump this one so more can get into the story and see (hear) what have happened along the AxeFx road. Lots of cool stories and soundclips. :-)
  51. Erik Hammero

    Engl Powerball structure vs Engl Screamer

    Yeah, the Screamer appear to be very open so I want to recreate that in the Axe. So my guess then would be that the Engl sim in the Axe won't get me to Screamer land?
  52. Erik Hammero

    Engl Powerball structure vs Engl Screamer

    Does anybody know if the gain structure of Powerball is similar to the Engl Screamer structure or if they are totally different? Will the Powerball in the Axe get me to Screamer land with another IR? I have played the Screamer in real life but not the Powerball so I don't know how different or...
  53. Erik Hammero

    Firmware Version 10.11 Now Available

    I saw in the release notes that sine amps have been added the overdrive because it was missing in the preavious FW. Last night I noticed that the USA Rythm didn't have one either. Maybe it's not supposed to have one? Or?
  54. Erik Hammero

    Connecting an MP3 player to AxeFx

    It shouldn't be any problem to connect an MP3 player to the loop return input, so I hear music through the while I'm playing? Not damaging the input itself? Setting FXL block second in the chain and directly to output and the guitar chain under it. Very much like its done when connecting to...
  55. Erik Hammero

    Firmware Version 10.10 Now Available

    This is great! Love the things they have done with the wha's! My only hope is that the Morley Bad Horsie is coming sometime in the future. :-)
  56. Erik Hammero

    Axe fx 2 Scenes with Roland FC200 Pedal

    So here it is. Hope it make sence to you. :-) SETTING UP ROLAND FC-300 (FC-200) WITH SCENES IN AXE FX II. I guess there are several ways of using the FC-300 for scenes but this is the way I do it. I’m always using the CC# that is standard the AXE FX II when programming the midiboards. I’m only...
  57. Erik Hammero

    Setting up axe fx 2 with roland FC-300 midi foot controller?????

    Check the state of auto engage and the bypass state in the volume and wah block and see if there is anything there.
  58. Erik Hammero

    Setting up axe fx 2 with roland FC-300 midi foot controller?????

    Set the board in Standard Mode and you should be good to go. The UP/DOWN pedals increases/deacreases by ten and use the numbered pedals to select the preset.
  59. Erik Hammero

    Axe fx 2 Scenes with Roland FC200 Pedal

    I'm running a bit behind schedule here but you are not forgotten. :-)
  60. Erik Hammero

    Axe fx 2 Scenes with Roland FC200 Pedal

    Of course. I will make a step by step for you in a few days when I get the time. :-)
  61. Erik Hammero

    Setting up axe fx 2 with roland FC-300 midi foot controller?????

    I'm using FC-300. Using pedal 1-5 for "stompboxes" and 6-10 for scene switching. Exp pedal 1 is usually wah and 2 is usually attached to a volume block with the toe up switch for engaging filter block for clean volume boost. Maybe I can help you out if you haven't already made it work?
  62. Erik Hammero

    Axe fx 2 Scenes with Roland FC200 Pedal

    Yes, its possible. I'm using the FC-300. AFAIK the only difference between the 200 and the 300 are the expression pedals.
  63. Erik Hammero

    Sound delay when changing Amps X/Y

    Ok. I thought I have seen it somewhere that it will be so. I just wanted it confirmed. Thank you. :-)
  64. Erik Hammero

    Sound delay when changing Amps X/Y

    I saw something in the 10.05 release notes that the delay that occure when changing amps X/Y was fixed, but its still present right? Have I missed something or is it just the way it have to be? It don't occure when I'm changing between Amp block 1 and 2 in the same preset though. (Switching...
  65. Erik Hammero

    Mark V Amp Match - All Channels & Modes

    Had trouble opening it but when you confirmed it was still active I tried harder and finally got it right. :-)
  66. Erik Hammero

    Mark V Amp Match - All Channels & Modes

    Do someone still have these?
  67. Erik Hammero

    Das Metal/Dizzy

    Do I understand correctely that with the Mimic the Das Metal have no relevance or have I misunderstood something. Its not that its "allowed" to be here, I just wonder. :-)
  68. Erik Hammero

    Das Metal/Dizzy

    Maybe its just me but what would. Be the difference between Das Metal and Dizzy? Checked the Wiki and I cant see an obvious difference...
  69. Erik Hammero

    OS X Driver Issue

    What could the issues be? The reason I ask is that my 2 weeks old Mac mini have "crashed" three times already with no obvious reason. It worked perfect before I installed the Fractal drivers. Using RME Fireface 400, Logic Pro 9 and the most recent version of OS. I cant say that its related to...
  70. Erik Hammero

    Can I carry AXE 2 in cabin bag in Airline ??

    I just did it 5 minutes ago. :-)
  71. Erik Hammero

    High gain with PAF?

    Several players uses PUs with lower output because they feel they can push the amp harder and therefor get more of the sweet spot some amps are giving. And that will actually be even more the case now that the AFX are very similar to how actual amps behave. :-)
  72. Erik Hammero

    Axe-Fx Norge

    Trondheim calling! :-)
  73. Erik Hammero

    The history of Axe Fx so far.

    That was a lot of fun to read. :-)
  74. Erik Hammero

    EBMM JP6 Piezo presets/IRs

    I guess there are several users here that have a EBMM JP6 with Piezo and I wonder what patch do you feel does the best acoustic sound? I have tried the ones on Axechange but whats your opinion?
  75. Erik Hammero

    Scenes and downloaded presets

    Yes, thats what I thought too. :-)
  76. Erik Hammero

    Scenes and downloaded presets

    But is it possible to download the preset, store it and then copy the blocks into the preset with scenes? Hope I made myself understood. :-)
  77. Erik Hammero

    New Presets for V9 on Support Page

    Maybe its just me but isn't the pitchshifter, chorus, phaser and flanger blocks in the presets of the new amps very "Steve Vai"? Because those blocks sound so f......g great!! :-) Together with the new amps they are real killers!!! :-)
  78. Erik Hammero

    appeal for a little calm

    Use the waiting practicing your instrument and write new beautiful songs. :-)
  79. Erik Hammero

    My AFXII lost its balls

    I know. But when you are located on an military base in the kingdom of Far Far Away anything should be worth a try. :-)
  80. Erik Hammero

    My AFXII lost its balls

    Checked input level? I/O button on the front panel? Instr in knob should be at approx 49.8% as standard. Anything less will give to low input from your instrument.
  81. Erik Hammero

    Fractalaudio Main Page back to "7"?

    The weird thing is when I use my iPhone its 7 but when I use my computer its 8. And it has nothing to do with refreshing the pages either. It doesnt bother me so I dont actually care. But its weird though. :-)
  82. Erik Hammero

    Using Roland FC-300 Cat5

    Ok. Will not do. :-)
  83. Erik Hammero

    Using Roland FC-300 Cat5

    Yeah, my thought too. But isn't Cat5 an industrial standard? A Cat5 port is a Cat5 port either way? If I connect it through the Cat5 without any external power on the FC-300 and it still lights up, then it would be ok?
  84. Erik Hammero

    Using Roland FC-300 Cat5

    I just purchased an Roland FC-300 board and discovered that this board has a Cat5 port. It should be ok to connect it to the Axe Fx through this? It doesnt have to be the MFC-101? Other boards can also be connected through that port as long as its Cat5 compatible? Right? Or?
  85. Erik Hammero

    How to make a synth block sustain forever

    Not sure if the link worked but I just posted it in AxeChange.
  86. Erik Hammero

    Kid@Drone - Sustained Drone Capture Preset plus live guitar layer

    Someone was looking for this preset. :-)
  87. Erik Hammero

    How to make a synth block sustain forever

    I found the OP. http://chrome://newtabhttp//forum.fractalaudio.com/axe-fx-ii-preset-exchange/54222-kid@drone-sustained-drone-capture-preset-plus-live-guitar-layer.html
  88. Erik Hammero

    How to make a synth block sustain forever

    I have the patch and its quite awesome. I'll post it when I get around to it.
  89. Erik Hammero

    Request Legacy Tone match

    The very best would of course been a match like the ones Floydian80 did with the Mesa Boogie Mark V. chrome://newtabhttp//forum.fractalaudio.com/axe-fx-ii-tone-match/52546-mark-v-amp-match-all-channels-modes.html That really makes a big difference, but its a hell of a job so I cant hope for...
  90. Erik Hammero

    Request Legacy Tone match

    Anyone having a Carvin Legacy to Tone Match with the Leggy? That would be great. :-)
  91. Erik Hammero

    The history of Axe Fx so far.

    10-11 months on waiting list?? WOW! :-)
  92. Erik Hammero

    URGENT - Possible SP1-R Failure!!! : ( Gig tomorrow....

    Thats very similar to a problem I had and that was a failure of the pedal itself.
  93. Erik Hammero

    The history of Axe Fx so far.

    I really enjoy these early "How I got started on Axe Fx" stories! Lets get more! Mine isn't very exiting. I just heard from a friend of mine that something called a Axe Fx was supposed to be the best. I didnt think much about it until a Std came up for sale local. I had been using Amplitube for...
  94. Erik Hammero

    The history of Axe Fx so far.

    Yeah, he is amazing!
  95. Erik Hammero

    Can I use Axe-manage to audition presets from the preset banks in V7?

    I'm usually a Hi gain amp guy but the Lo gain amps really came to life with FW7. :-)
  96. Erik Hammero

    The history of Axe Fx so far.

    This is so great to read! Part of the history. :-)
  97. Erik Hammero

    The history of Axe Fx so far.

    Thank you very much! Its really interesting to know a bit of the beginning. And yes, it would be really great if The Overlord (Cliff) could find some time to tell a little about how he experienced this and the fast growing interrest in his product. :-) Does anyone have a clue of how many Axe Fx...
  98. Erik Hammero

    The history of Axe Fx so far.

    Did the Axe Fx gt very popular and "sought after" pretty quick or was it a more normal progression to it?
Back
Top Bottom