Search results for query: *

  1. oldstar1975

    Fell in love with Treble Booster!

    Really love this drive! Mix - 75, master 7, drive 2-3, tone to noon - and almost every amp starts shining! Jus a little bit high end brilliance without loosing the low end of the amps! Love it!
  2. oldstar1975

    How to record guitar with backing track at the same time?

    Hi everyone! I'm jamming with youtube backing tracks, is it possible to record the whole session - guitar AND backing track? Right now I have only guitar recorded. Thanks!
  3. oldstar1975

    Can I use FC and midi PC and CC at the same time?

    Then I played on AXE II, my MFC was connected via Ethernet, and AXE was connected to keyboard sequencer via midi also. I had a tempo, PC, CC from the keys, and at the same time i was able to send the PC and CC from MFC. It was very good setup. Does someone use the FC and AXE III same way now? Is...
  4. oldstar1975

    global input 2 not syncing - bug?

    Just discovered that I can't link all the input2 block across all the presets via Global Bloc function. Then I set it to "global 1" for example, after touching some buttons in one linked preset there is nothing changing in the another.
  5. oldstar1975

    AXE III cab managing

    Hello! I want to ask - how do you guys managing cabs in Axe III? I mean that there are a lot of them, and if I will use the Axe Edit in the Cab Block it takes a lot of time to check for example 20-30 impulses, I must do the same clicks time after time.. I can use front panel and list the cabs...
  6. oldstar1975

    Fixed Can't copy amp channel from one preset to another

    When I trying to copy to clipboard channel B of amp block for example, switch to different preset and paste to channel B, all another channels of destination amp block replacing by wrong settings, Bassman mostly.
  7. oldstar1975

    (implemented) To have the "all" option in the tuner source menu.

    I have two guitars plugged in input 1 and 2, it would be good to tune them then I need without changing input source in tuner!
  8. oldstar1975

    Axe-Fx III Noise

    Hi to everyone! I want to ask you - How noisy your unit is? I mean that I usually setting threshold for middle to hi gain amps about noon in the input block, but in the previous Axe XL+ it was noticeable not so high, I sat the input gate about -60-70 db. Actually it sound normal, gate not...
  9. oldstar1975

    Tremolo in tempo. Solved!

    Hi to everyone! How I can set tremolo to the tempo right? At AXE II there was LFO controller which did it perfectly, but in III it have been changed and now I stuck in it... Any ideas? Thanks!
  10. oldstar1975

    Using two guitars for live show

    Hi! I looking for simple way to use 2 guitars with Axe III (not at the same time) during the live show. I have two wireless systems, for both guitars. And I don't want to switch off the body packs, pull off the jacks and so on.. How do you guys doing it? Thanks!
  11. oldstar1975

    Looper and scenes managing

    Hi to everyone! I trying to find the right solution to use looper live with MFC. I have one preset with looper block at the end of the chain, and several scenes which I want switch during the playing. The problem is - then I in the looper mode, my default scenes +/- IA switches not working. I...
  12. oldstar1975

    MFC and Axe III

    I want to ask - do the Fractal has the plans to realise normal (not midi) connection between MFC-101 and Axe III?
  13. oldstar1975

    Bug? Bogfish brown crap sound

    Just discovered that my old preset with bogfish brown amp sounds with some noise after resetting. XL+. latest firmware. sound sample - https://www.dropbox.com/s/0g5thj1n8i4kebi/bug.mp3?dl=0
  14. oldstar1975

    Fractal Bot error

    Hi! Every time I trying to backup the banks after some time I have a "message timeout", and after that sometimes the Axe frozing. Only switching off helps. Axe FX II XL 9.04 Fractal-Bot 2.9.0 Mac OS 10.11.6 Help! Update. I have 3 Axe FX II - Mark1, XL and XL+ and 3 different Macs. Of a cause...
  15. oldstar1975

    Wish copy/paste all amp's settings in Axe edit

    Every time then new firmware released, I must reselect the amp block to have new improvement, and it takes a lot of time to restore all my knobs as it was before. May be it's good idea to have "copy settings" button in Axe Edit? Of cause it must affect only for knobs positions, not the all...
  16. oldstar1975

    Bug? Axe-Edit preset manager tool bug

    Hi! Than I'm using Axe Edit preset manager tool in auto-audition mode, some ( I am not sure ) presets+cab bundles use not they own cabs, but my user cab 79, not the scratchpad. Then I am importing the bundle it saving correctly. Is it bug? XL+, all soft is latest.
  17. oldstar1975

    Can't import preset correctly

    Hi! I've bought TAF 450 Bronze preset bundle some years before. I just returned to this great pack and find them still amazing, but I have a problem - than I saving preset to my Axe, it started to sound differently, not as than I listen to it through AXE EDIT preset manage tool. May be its cause...
  18. oldstar1975

    [NOT A BUG] AX FX changes and saves wrong parameters.

    My XL plus does very strange thong - sometimes it changing the block statement in the preset and SAVES IT. The unit receiving the midi signal from the keyboard, program changes, CC etc., but even if it have the command to change something in the preset how it can save it? The firmware is the...
  19. oldstar1975

    [NOT A BUG] Unexpected bank changing

    I wrote about it already, but now I tried brand new XL+ and have this problem again. My Axe connected with keyboard's sequencer via midi, it's receiving the midi clock, PC and CC messages, everything was perfect just before I connected MFC via Cat5. Now everything is the same, but sometimes...
  20. oldstar1975

    Can't reverse phase in plugin!

    Hi to everyone! I installed Cab Lab Plugin to Logic, it works well, but the phase reverse button changes nothing! What's the problem? Thanks! update! sorry! Problem solved!
  21. oldstar1975

    Recording with impulses.

    Hi to everyone! May be its obvious, but may I ask about length of the impulse. I want to record AXE to the Logic, and I suppose that the internal impulses are too short for the quality recording, isn't it? So I will use the VST plugin with impulses, so the main question is - that the difference...
  22. oldstar1975

    Compressor Dynamics type.

    Hi to everyone! Just tried the Dynamic compressor, with positive values of Dynamic parameter. It expands the signal and it sounds pretty good with my default chrunch, but I can't understand how it works. It definitely rising the output signal, and then I reducing Master of the comp block, the...
  23. oldstar1975

    [NOT A BUG] stereo mode in mono cab

    I don't know - is it bug or no. Then I set the cab block to "ultrares stereo" mode, the stereo signal (delay etc) passing through cab without problems, but If I set the cab block to "hiUltrares" mode WITH "input select" to "stereo", the signal became mono. Firmware 3.03.
  24. oldstar1975

    Octaver can't detect the note from back inputs [NOT A BUG]

    I'm discovered that my octaver plays something completely wrong when I plug the guitars to rear inputs. When the guitar plugged to front input octaver sounds correctly. I solved the problem - I replaced the Ovtave Div by Whammy with fixed 100% pedal with octave down, in that case block detects...
  25. oldstar1975

    Two wireless guitars in one Axe (not at that same time)

    Hello everyone! I'm trying to create the scheme for my live show. Basic input facts - I playing two different guitars, both are wireless. And I need to have the ability to change the guitar at any time, no matter which preset currently loaded (my presets are changing from the sequencer)...
  26. oldstar1975

    Bug? 19.03 MFC Bug

    Hi! Today I updated my second Axe to 19.03 Beta and connected to my MFC. Usually I'm using MFC with another Axe, so I can't tell for sure was this bug before or not, but I think not. Bug - names of the presets on the screen of MFC are not valid, they are mostly the names of neibour presets, but...
  27. oldstar1975

    good reference guitars for tone matching

    Hi everyone! Where you guys finding the good reference guitars? I mean that it's very cool to have an example of live or studio recorded separate guitar track to dial my own tone.
  28. oldstar1975

    Difference between phones output and XLR.

    Hi everyone! I'm using Axe FX II several years, playing on many venues, and I want to tell one thing. The sound from phones output not so rich and full as the same sound from XLR-Main console-IE Monitor System and the same phones. It's a big difference, Everey time on soundcheck I prefer to...
  29. oldstar1975

    How I can block CC#0?

    I need an advise. I'm using MFC two years, and I only one bug did't solved - sometimes without any reasons my default bank 1 changing to bank 3, mostly it happens when I using expression pedal, but not every time. As I can see - CC#0 somehow sending from MFC. How I can block this CC forever...
  30. oldstar1975

    Fractal Bot didn't sending anything

    Today I discovered the problem - I can't pass step 2 - browse the file to send to the Axe. After clicking the button nothing happened! Any ideas?
  31. oldstar1975

    unexpected volume drop

    My bug - sometimes when I'm playing the gig, volume (and I suspect the overall gain too) drops down almost to zero. input led indicators working good, at full level, so the signal definitely ok. Volume drops at all outputs. Only way to fix it - reboot the axe. I am using sequencer to change the...
  32. oldstar1975

    midi channel

    I want to ask stupid question. Why I have the possibility to choose different midi channel, if MFC in any case sending midi messages to all midi channels? What's the point of it? If I want to use another midi device in my rig - in that case I have to check all my presets manually and set the PC...
  33. oldstar1975

    Help! My MFC sends PC to OMNY MIDI Channel!

    My MFC sends PC to OMNY MIDI Channel! Then I set Axe's midi channel to 14 for example, and MFC's midi channel to 1, MFC still sends program change messages. Presets changing. I don't understand how it possible!
  34. oldstar1975

    Bug? Undesirable Bank Changing!

    I have a problem. My Axe connected with keyboard's sequencer via midi, it's receiving the midi clock, PC and CC messages, everything was perfect just before I connected MFC via Cat5. Now everything is the same, but sometimes, in most cases when I using Expression Pedal preset changes to 318...
  35. oldstar1975

    Wah pedal bag

    I have a problem with MFC-101 and the external midi switching. MFC connected by Ethernet, and midi sequencer connected to Axe via MIDI input. All program changes going from sequencer, but if I moving Wah pedal when program change message incoming, AXE switching to the Bank C instead Bank A...
  36. oldstar1975

    Gig troubles. no sound!

    Today I played first show with Axe II. Discovered unexpected trouble - just after power on there was no sound from output 1, both input indicators was working normally but output was mute. After simple rebooting problem disappeared. This bug was two times. I am really worried about that, I am...
  37. oldstar1975

    wah on clean amp sounds distorted!

    Hi! Can't solve this problem! All levels in wah block is 0, but it sounds with light drive... Any ideas? Thanks!
  38. oldstar1975

    connect Axe Ultra with digital wireless system?

    Does anybody tried to connect guitar digital wireless system such as Line 6 Relay G90 with AXE FX ULTRA via SPDIF? Is it possible? I have heard what G90 produced with spdif out (96KHz 24 bit). very interesting....
  39. oldstar1975

    Two preamps in one fx send!

    I have an idea to use two external preamps using only one stereo fx send - return of AXE FX. General idea is to use left channel for one preamp and right for another! Is it possible?
  40. oldstar1975

    External Power Amp

    Hi! Is any use of connecting external power amp (in my case Marshall 20/20 EL84) to replace power amp simalution? Just send all signal to amp, and return it back from direct outputs to cab simulation. Is that will be better? Any thoughts?
  41. oldstar1975

    Load user's IR to Axe.

    Hi! I am new user, so be patient please! I loaded free Marshall 1960 cab from Red Wirez site. and triyed to install it to user1 slot. As I understood, I can choose only one impulse (only on position of one mic). Is it right? If so, How I can find the best position of mic? Thanks!
  42. oldstar1975

    Please help to find Ir for acoustic guitar!

    I have heard that where is a special impulse for acoustic guitar! Where I can find it? Thanks!
Back
Top Bottom