Search results for query: *

  • Users: tas9195
  • Content: Threads
  • Order by date
  1. tas9195

    Getting rid of AXE FX II

    So I bought this thinking I would use it quite a bit, then life happened and it just sits now. I have had no luck trying to sell it. I also have the MFC and mission exp pedal. Where should I look to sell it. There is very little play time on and no gigs.
  2. tas9195

    recording with axe fx?

    Question on how to route my setup for correct recording. I have the Axe II mark II running thru the matrix gt1000fx, I have a focusrite scarlett solo and will run that into reaper for recording. I also have 2 tannoy 5 " studio monitors. I want to be able to record and still hear what I am...
  3. tas9195

    help routing new setup

    So I bought a scarlett solo interface for some recording and learning to reamp. I have been running my axe II through my monitors(tannoy), because my 212 cabinet sucks ass until I can get a new one. I am going to hook up the scarlett in my setup. how do I route it so that I can still use the...
  4. tas9195

    Wonky sound with new Q FW and monitors

    There are a few things. The first being I don't get enough time to tweak around and grab ahold of this thing. So when problems come about I get lost. Second when I updated the quantum FW I am getting a wonky kind of sound or like there is a wah envelope filter or something on and it is on all...
  5. tas9195

    Studio monitor set up?

    I just got some Tannoy reveal monitors and thought I read on how to set them up with the axe II. I have 2 TRS cables and ran them the way I thought but I am getting alot of excess noise out of the left monitor, can someone give a quick description of how to run them they are powered so I would...
  6. tas9195

    Cab building experience anyone?

    I am about to embark on building my own 212 cab using V30s. I do woodworking so that is not a problem just don't have experience with building for proper air space and such that you need for speakers I am just basically going off of dimensions for the ENGL 212. There are detail stuff I am not...
  7. tas9195

    MFC 101 and SP1 setup woes (done use Chris--KKMmusic video)

    So I attempted to set up my SP1 with the MFC like in the video I want to do the volume when button is inactive and wah when activated. after hitting edit and setup I paged over to XP1 and set it up like he said and then went to page over to XP 2 and there wasn't that option is the first problem...
  8. tas9195

    MFC question/issue with video

    Just a strange thing I ran across in initially setting up the MFC. Could be a simple setup issue but want to be sure. https://www.youtube.com/watch?v=RoR28NNwFmc
  9. tas9195

    No signal into Reaper

    A while back I got the trial version of reaper just to see if I would like it. I had it set up where I could record the axe with just the USB from axe to pc. It has been a while since I messed with it but I did like so I bought the actual version. Now I tried to open Reaper and try to record...
  10. tas9195

    8 or 16 ohm?

    I am going to be replacing the speakers in my 212 cab. Not too hip on the ohms and which direction to go. Does it matter? I am using the Axe II Mk II, MFC 101, Matrix 1000 into a 212. I am getting 2 celestion V30s
  11. tas9195

    TRS cables?

    Hey guys I just purchased the MFC MkIII finally and a SP1 from mission. I need 2 TRS cables to hook up the way I want any suggestions without paying an arm and a leg. I found Mogami cables that look pretty good but a 3 ft cable is 50 bucks x 2 = 100.00 is that worth it or is there a better...
  12. tas9195

    Request

    I have been trying to get close to Billy duffys big guitar sound with the phaser effect he uses on alot of his stuff and can't seem to nail it. Mainly for firewoman. wild hearted son and some of the other big rock songs they had and maybe the rhythym from sanctuary that is a little less gain...
  13. tas9195

    Would love this clean tone. Jack Thammarat doing EJ

    IF there is a tone matching guru who can match this clean tone that Jack Thammarat is using on this Eric Johnson song I would be indebted to you forever. My set up right now isn't condusive to me getting a good match plus my matching skills aren't up to par...
  14. tas9195

    Engl 212 dimensions questions

    any Engl 212 owners or anyone knowing the answer can help me. I am planning on recreating the Engl 212 cab and want to know if the dimensions listed on their site in the inner dimensions or outer dimensions. CABINETS[uid]=81&iPhoneBypass=1
  15. tas9195

    set up with bugera head?

    Ok so I am bailing some gear to get the matrix power amp and have a potential buyer for my current power amp. It will be a little gap between selling this and getting the matrix. I have a bugera head that I can use in the mean time. what would I need to do to use the axe with the head unit as...
  16. tas9195

    TM for Billy Duffy help

    Ok so I found a patch this is pretty close but not quite there can it lacks a little punch. I take that patch and put a TM block in there and get it closer. I have only attempted to do one from scratch based on info on the internet with very little success.
  17. tas9195

    8 ohm or 16 ohm speakers

    I am in the process of building my own cab(212). I do woodworking so I thought I would give it a shot as it would be cheaper than buying one. I am going to base it off of the ENGL 212 cab. Just to see how well I could pull it off. I plan on using Celestion vintage 30s. I currently am using the...
  18. tas9195

    Guitar stems file problem

    ok so I found a site that apparently has a bunch of guitar stems and wanted to share them here. I downloaded a couple last night and unzipped them and it wouldn't open but the extension just says file and nothing else and get an error every time I try to open it no matter what I use. Any want to...
  19. tas9195

    Volume pedal with Axe

    I am wanting to add a volume pedal to my rig and not sure where to insert it in the chain. I have the steve vai little alligator right now. My volume knob absolutely sucks when it comes to lowering the volume to play quieter and for swells. So where would I put it. Also if I wanted to add my wah...
  20. tas9195

    Lacking umphhh in power?

    It seems like my sound lacks punch even with presets from others that I heard a clip from where it sounded 10 times better. The overall sound isn't bad it just sometimes sounds like it is being choked and can't get its full potential out, especially when chugging on power chords or the open E...
  21. tas9195

    MFC 101 Label template

    Ok I need someones help, I have created a template for the MFC 101 so that I can create some custom labels for when I finally get it. So far it has turned out pretty good. The only problem being is I don't have mine yet and so I don't know the physical size of the labels. Can someone who has any...
  22. tas9195

    Tease me please me Scorps TM 1st attempt

    Hey guys this is my first attempt at a TM. So go easy on me. I picked one that wasn't too difficult. I think it isn't too bad. I don't have a way to record a sample right now. Hope you guys try it and if someone can post a sample of it I would appreciate it. Anyone no how to quickly set up my pc...
  23. tas9195

    programming presets to midi board (midi mate)

    I have setup my midi mate to the axe fx and it changes the presets in order 1,2,3, etc.... but I can't figure out how to tell it to use button 1 to change to say preset 110 and I would like to use say button 2 to switch to scene 2 of that same preset. I looks like from what I read in the manual...
  24. tas9195

    Axe edit 1.9 issue installing patches HELP

    Need some help with installing syx files I downloaded from here and the axe change site. I figured out how to get them loaded. At least I thought I did. I had the patch loaded in real time which was cool. (I am new at this by the way) I saw it was loaded because it showed the name on the axe...
  25. tas9195

    Finally got one!

    Well I joined here a little over 2 years ago thinking I would get one soon and then happened the nasty word LAYOFFS. Then came my second child. Well now tomorrow my axe fx will finally be here. I can say I officially belong to the community. Look forward to learning and sharing on here.
Back
Top Bottom