Search results for query: *

  1. sigitar

    stand in switches - hold function?

    Yes, I know that. For some strange reason the hold function didn't work. I restarted the FM3 and now it works
  2. sigitar

    stand in switches - hold function?

    Can I use the hold-function with stand in (external) switches? I was able to set up my external switches, but unfortunately only the tap function. Is the hold function possible with an external switch? If so, what could I have done wrong? (Yes, actually I think I understand the stand-in switch...
  3. sigitar

    FM3 with external Looper

    So you forego the second output from FM3? (for monitor)
  4. sigitar

    FM3 with external Looper

    Is there anyone here who uses the FM3 with an external looper? I want to use my FM3 together with my Singular Sound AEROS Looper and I'm wondering how best to wire it up. In a loop (send/return) as a separate block or simply after the FM3. Both have advantages and disadvantages. If I use the...
  5. sigitar

    Pedalboard power that can feed pedals AND FM3?

    Maybe this? https://www.thomann.de/at/harley_benton_powerplant_iso_1ac_pro_modular.htm
  6. sigitar

    Looper - playback level

    yes ...i will handle it with the playback level. :)
  7. sigitar

    Looper - playback level

    I made a mistake there, of course I meant playback level Obviously it can, because mine IS louder. My ears work even though I'm older. ;-) the mix of the parallel blocks are set to 100%
  8. sigitar

    Looper - playback level

    Of course I already handled the block. I can't take a screenshot right now, but all levels are at zero. It looks the same as the picture above. However, the playback is louder. I will set the dry level lower, but shoudn‘t it be the same, when everything is set to zero? regarding the...
  9. sigitar

    Looper - playback level

    With the looper, the playback level is louder than the dry signal. What can be the reason? Or is it normal and I need to adjust the volumes? (The looper is at the end of the chain....) and when I go from record to play, a few milliseconds are missing at the intersection.... any ideas?
  10. sigitar

    Cab at the end - automatically mono?

    Please correct me, if I am wrong. To set a stereo setup to mono I just have to place the cabinet at the end of the grid. Is that correct? Or is sum/copy L/R the better solution?
  11. sigitar

    Wish section revert (like scene revert)

    but no section (!) revert
  12. sigitar

    Wish section revert (like scene revert)

    It's about the following situation: a certain song section is selected. I enable a few effects and then want to go back to the originally saved section with the push of a button. Unfortunately, that doesn't happen if I select the section again. It would be great if this were possible. It works...
  13. sigitar

    2nd press - stored song-section

    OK. I still had hope that it is possible.
  14. sigitar

    2nd press - stored song-section

    any ideas?
  15. sigitar

    2nd press - stored song-section

    That page 7 only refers to scenes. This option does not exist for sections.
  16. sigitar

    2nd press - stored song-section

    Can I set what happens when I press an already selected song section a second time? I can't find anything about it in the footswitch configurations... It's about the following situation: a certain song section is selected. I enable a few effects and then want to go back to the originally saved...
  17. sigitar

    scrolling through songs in setlist

    that would be awesome and very handy in some situations.
  18. sigitar

    scrolling through songs in setlist

    Is there a way I can use the big wheel to scroll through the songs within a setlist? Or generally another possibility to switch through the songs. Except for the +/-1 or +/-5 option. thanks
  19. sigitar

    loading songs in setlist?

    Thanks for your answer. There are always situations (especially live but also when programming) where I have to go to a completely different song (not the one that comes next in the setlist). I know the procedure you described... I was hoping there was a simpler method. Preferably with the big...
  20. sigitar

    Scene revert in the editor?

    OK. Thanks
  21. sigitar

    Scene revert in the editor?

    Hi, Where can I find "scene revert" in the editor? Can't find it neither in setup-settings nor preferences... Thanks
  22. sigitar

    loading songs in setlist?

    How can I select a song at the other end of the (long) setlist? I know there is a possibility to switch up to 10 songs, but I don't want to sacrifice a switch for it (unless there is no other way). Is there a possibility to select songs directly by turning the big knob - (like the presets) ?
  23. sigitar

    can't load an amp from library on certain channel

    Sure. I attache it. Yes, Turbo FM9. Thanks a lot!
  24. sigitar

    inc./dec. Banks (or songs) via Midi

    I don't mean the global preset order where there are only 3 banks, but the banks where presets are stored song-oriented. (or songs in setlist mode)
  25. sigitar

    can't load an amp from library on certain channel

    I know the channel name doesn't always match the model and yes, I already refreshed the library. The weird thing is that everything I've tried on channels A, B and C just doesn't work on channel D. It seems like channel D is blocked. Unfortunately, the European support cannot help me either and...
  26. sigitar

    can't load an amp from library on certain channel

    I try to load a new type in channel D of the amp block. It works on channel A, B, C - but I can not load it in channel D You can see it in the link. The Amps are changing in channel A, B, C but not in channel D. That's strange... what did I miss...
  27. sigitar

    inc./dec. Banks (or songs) via Midi

    Layout? mode? just words...you knew what I meant. ;) You can switch the banks with external footswitches, so it makes sense to do it via Midi as well. (pdl1 - pdl3 is already occupied by me) However, I've seen this is already noted in the wish list.
  28. sigitar

    can't load an amp from library on certain channel

    Hi, Suddenly I can't load amps from the library anymore. ONLY on channel 4. It works on all other three channels. Is there some lock I turned on by mistake? Or is that a bug? Thanks
  29. sigitar

    inc./dec. Banks (or songs) via Midi

    Thanks! And banks in preset-mode?
  30. sigitar

    inc./dec. Banks (or songs) via Midi

    Where I can find Bank (or Song) in- and decrement? I only find Midi CCs for presets and scenes to in- and decrement but no banks to scroll via Midi... Is it possible?
  31. sigitar

    Wish inc./dec. Setlist and Songs via Midi

    Can I switch banks via Midi? ...if it doesn't work with songs?
  32. sigitar

    FM9 with Voodoo Lab PP2+? or similar?

    Thanks! Good to know!
  33. sigitar

    FM9 with Voodoo Lab PP2+? or similar?

    Hi, Can I power the FM9 with a VoodooLab PP2+ (200-watt courtesy AC outlet for powering additional devices)? And are there other multi power supply that have a AC outlet (to power the FM9)? Thanks, Sigi
  34. sigitar

    Strymon Cloudburst

    it looks like my cloudburst has to stay on the board. 🤷‍♂️
  35. sigitar

    reduce the octa in the fuzz?

    Can someone explain to me how to reduce the octave component in the octa fuzz. (Block: octave distortion) I would like the octave to be a little more subtle and can't find a way to do it. Thanks
  36. sigitar

    Bag for FM9 AND guitar?

    I've now ordered that too. The FM9 is sufficiently fixed inside?
  37. sigitar

    Cooper Carter's FM9 Masterclass

    There is a 6 minute black screen hole. ...but then there is content. I don't know if there is something missing.
  38. sigitar

    Bag for FM9 AND guitar?

    I actually assumed that it was a robust, high-quality, well-padded bag. ….like the Kapsule from gruv gear.
  39. sigitar

    Bag for FM9 AND guitar?

    Hi, is there a bag for FM9 AND a guitar? No double guitar bag (there's too much space all around), but a guitar bag with a compartment for the FM9, where it sits firmly and securely inside.
  40. sigitar

    Cooper Carter's FM9 Masterclass

    Same here, ...but isn't all knowledge about FM9 included in the AxeFX III masterclass? At least as far as the editor is concerned? Or is there a separate master class on AxeEdit?
  41. sigitar

    experience with Taurus FRFR AC-12G?

    is there any experience with Taurus FRFR AC-12G? https://nordsound.fi/en/p/taurus-frfr-ac-12g-compact-active-speaker
  42. sigitar

    Songs/Setlist vs per-preset

    Thanks, @Greg Ferguson what I didn't understand until now (but now I do) is the fact that each song can have its own per-preset-switches. i.e. the assignments can actually be reconfigured as desired. That confused me originally...
  43. sigitar

    scene/section reappears originally saved

    I switch a scene (or song-section), change an effect with an effect ON/OFF, then go to another scene (section), and return to the previous one. The effect is still switched on, although it wasn't originally saved (it was just switched on before depending on the situation). Where can I set it so...
  44. sigitar

    Songs/Setlist vs per-preset

    I still don't get along with the songs/setlist system somehow. Is the song/setlist layout global, including the added per-preset switches? I always have a different number of song sections and would like to use the remaining free switches to turn effects on and off. i.e. I have per preset...
  45. sigitar

    Song title in large display?

    That would be great! In the truest sense of the word... Thanks
  46. sigitar

    Song title in large display?

    is it possible to show the song title in the (large) display in song/setlist mode? I want to do the song-switching via the hold function, which is not always shown on the small display
  47. sigitar

    Songs/Setlist vs per-preset

    ...see attached pic. but now I understand that "per-preset" and songs/setlist can be used at the same time
  48. sigitar

    Songs/Setlist vs per-preset

    Is the per preset function still relevant? Now that there are songs/setlists? Or am I missing something where the per-preset function has an advantage over songs/setlist (except quantity)?
  49. sigitar

    LED behaviour when toggle between channels.

    Great! Thanks!
  50. sigitar

    LED behaviour when toggle between channels.

    OK. Thanks! And that the LED always stays on when switching channels? Is that possible? The reverb is always on, only the channel changes. Or - even better - different colors for the different channels... but I think that's going too far...
  51. sigitar

    LED behaviour when toggle between channels.

    Hello everybody, I have a question regarding LED behavior: I created a layout in which, among other things, a switch toggles between channel A and channel B of the reverb - when I tap. When held, the reverb turns off. Everything works as it should, only the LED display does not react as I would...
  52. sigitar

    Switch only reacts on release! (no hold function)

    @iaresee & @chris Thanks a lot! It was the MLM-setting! 👍
  53. sigitar

    Switch only reacts on release! (no hold function)

    I'm having trouble with the bottom right switch. Now with the second device! The switch only reacts when I release it (and then only if it is within a certain time). ...and no, there is no hold function on it. If I leave my foot up for too long, nothing happens. any ideas? hardware bug? Thanks
  54. sigitar

    Announcing FM9 Turbo

    Hi, How can I distinguish an FM9 Turbo from an FM9 standard? Purely optical... Thanks
  55. sigitar

    FX8-edit manual !?

    Thanks for your reply. No, I mean move or exchange presets ... When I store a block in my library the X/Y-status is stored as well, isn't it? Is there a possibility to prevent this?
  56. sigitar

    FX8-edit manual !?

    I am a relatively new user of FX-8. I just try the FX8-Edit, but I can not find a manual !!! only the release notes...meh....this is frustrating I have so many questions.... E.g. How to exchange or move presets? thanks a lot Sigi
  57. sigitar

    Wish Rename the blocks/scenes

    or instead of the scenes: INT - REF - VER - SOL (Intro - Refrain - Verse - Solo) instead of S1 S2 S3 ... ;)
  58. sigitar

    Wish Rename the blocks/scenes

    My wish for the FX-8 (the only one!!!): it would be great to rename the blocks, or at least the scene-blocks. cheers, Sigi
  59. sigitar

    Big issue with a new FX8 (v4.00)

    yes, it was a hardware issue and I got an exchange :) thanks.... and yes, G66 are the best!!!
  60. sigitar

    Big issue with a new FX8 (v4.00)

    Fractal support refer to G66
  61. sigitar

    Big issue with a new FX8 (v4.00)

    Hi everyone, I got a new FX8 MKII with fw 4.00. I should really be happy about it, but unfortunately there is a big problem. The footswitch 1 do not work as it should... :( It seems as it would be connected with footswitch 3. When I press (or hold) the footswitch 1, footswitch 3 reacts. I've...
  62. sigitar

    Axe edit III & iPad?

    Hi there! Is Axe Edit compatible with iPad? I hope this question has not been asked. if so, I'm sorry... cheers, Sigi
  63. sigitar

    New Firmware Version 1.0 for the MFC-101 MIDI Foot Controller

    Yes, I did it! The converted-settings-LOAD didn't work. I've tried it a few times... I got the message "Preset 1 loading" > the whole time, even when the loading process is ready.
  64. sigitar

    New Firmware Version 1.0 for the MFC-101 MIDI Foot Controller

    I got that message at the end of the converted load.. and unfortunately the the converter did not his job :(
  65. sigitar

    New Firmware Version 1.0 for the MFC-101 MIDI Foot Controller

    MIDI OUT when I load INto the MFC??
  66. sigitar

    New Firmware Version 1.0 for the MFC-101 MIDI Foot Controller

    Hmmm....I don't got it working :( the MFC is updated, but the thing with the converter didn't worked. At last I got the message: "Axe FX Name Timeout" .... grmbl...
  67. sigitar

    New Firmware Version 1.0 for the MFC-101 MIDI Foot Controller

    I've tried it with the SysEx Librarian, and I came to an result, BUT when I browse it with the converter, and selected the file, I got the message "invalid file size 164, expected 54798"... what's wrong? edit: I think I got it...I must take the "record MANY"-button!! shame on me ;)
  68. sigitar

    New Firmware Version 1.0 for the MFC-101 MIDI Foot Controller

    thanks! there were no word about it in the manual! (german) does this work with axe-edit?
  69. sigitar

    New Firmware Version 1.0 for the MFC-101 MIDI Foot Controller

    Hi! I'm very agog for the "new" MFC-101 I want to resume all my settings of the MFC, before upgrading... so I made a SysEx Data Dump! But WHERE is the required file - that I need for the bulk dump converter - on my Mac?? I cant find it...
  70. sigitar

    How to assign the looper-functions with MFC-101?

    Hi! I want to remote-control the looper functions (rec, play, stop, stack, rev) with my MFC-101. I've tried it with CC#-Messages, but it didn't work. please help me :?: I'm a real Midi-Newbie!:oops thanks, sigi
  71. sigitar

    John Mayer Patch

    I'm looking for a representative John Mayer Tone with my JM-Strat. I've tried it with Spec.OD, but I do not succeed. It's always a little bit too harsh. I found a Mayer-Patch in this forum, but it doesn't work. No idea why... Do anybody have a John-Mayer-sounding Patch? or Robben Fordish? thanks!
  72. sigitar

    alternativen zu Axe Edit 0.9? Bad Checksum??

    Ich hab auch eine RME - mit der hat's nicht gefunkt. Mit Midi-Sport klappts!
  73. sigitar

    alternativen zu Axe Edit 0.9? Bad Checksum??

    Ich verwalte, editiere und tweake meine 20-30 Patches ausschließlich am AxeEdit und habe - ausser der User-Cab-Sache - kein einziges der oben beschriebenen Probleme. Vielleicht liegt's ja doch an der Peripherie? Grüße, Sigi
  74. sigitar

    Axe-Edit for Dummies

    Sorry, ich fürchte ich kann dir nicht weiterhelfen! Die aktuelle Edit-Version wirst ja haben, oder? Wenn ja dann frag doch den Jochen von G66. Der hat mir bis jetzt bei JEDEM Problem helfen können, jedenfalls bevor du im Greisenalter bist...;) Gruß, Sigi
  75. sigitar

    Axe-Edit for Dummies

    Hallo Paco! "Midiot" ist super! :D wenn du IRs lädst passiert GAR NICHTS mehr? der Ton ist weg? oder Kontakt zum Axe ist abgebrochen? lädst du denn deine IRs über den Manager? Ich kann momentan nur sagen, dass die IRs zwar beim erstmaligen laden im Manager sichbar sind, nur beim nächsten...
  76. sigitar

    Preset names in edit-mode

    First...the MFC-101 ist absolut amazing!:D It would be fine if the MFC could adopt the preset names from the AxeFX also in the Edit-Mode. (when AxeFX-Mode is on)
  77. sigitar

    Soloswitch?

    YES! That's it! Thanks again, yek!
  78. sigitar

    Soloswitch?

    Ich versteh's nicht! wenn ich mir den Boost bastle - wie oben von yek beschrieben - also via unterschiedlichen Vol-Output Einstellungen... wie programmiert man da einen unterschiedliche On/off-Status Normalerweise (also herkömmliche IA-Switches - wie chorus, tremolo usw - speichere ich ja vie...
  79. sigitar

    Soloswitch?

    Sorry, aber WIE mach ich das?:?
  80. sigitar

    Wah & Envelope Follower like XOTIC Robotalk

    Thanks ;) I've tried it with the wah-block and didn't get it!
  81. sigitar

    Soloswitch?

    ...und kann man den Button so programmieren, dass er sofort beim Preset-Umschalten ON oder OFF ist? weil, wenn nicht, dann wäre eigentlich die "Filter-Methode" zu bevorzugen, oder?
  82. sigitar

    Wah & Envelope Follower like XOTIC Robotalk

    Hi! I'm looking for funky wah-settings with envelope follower like the xotix robotalk envelope filter. could you please help me... my settings on the AxeFX are dissatisfying! btw: what about the AxeWIKI? Thanks, Sigi
  83. sigitar

    Suche gute Presets!

    Das > http://forum.fractalaudio.com/threads/25242-Yek-s-presets-recordings-10.03 hat mir sehr weitergeholfen, nicht nur gute Presets betreffend, sondern auch wie ich sie zusammenstelle! Ein bisschen tweaken ist wahrscheinlich schon nötig, aber es hält sich in Grenzen... Grüße Sigi
  84. sigitar

    kann mir jemand axe-edit erklären!?

    Hi! AxeFx "abscannen" funktioniert, indem du es als source anwählst. Somit werden alle am Axe gespeicherten Patches im Editor angezeigt. Wenn das Axe als source angewählt ist brauchst auch nur mehr "save" zu drücken und das patch ist gespeichert. am wichtigsten ist, wie gesagt, die...
  85. sigitar

    Ein- und Ausschalt-Plop

    Aber es ist doch ganz einfach: zu Beginn: ERST Einschalten DANN an die PA anschließen zum Schluß: ERST Kabeln ausstecken DANN Axe ausschalten. so machs ich - und wenn ich mal zwischendurch, das Axe ausschalten muss - was eigentlich fast nie vorkommt - sag ich's dem Techniker, dass er mich kurz...
  86. sigitar

    Ein- und Ausschalt-Plop

    Wieso willst denn mitten unterm Gig dein AXE ausschalten? dieses Problem kenn ich nicht wirklich, aber das einzige was mir dazu einfällt ist ein Lehle A/B-Schalter, mit dem du zwei verschiedene Signale zur PA schicken kannst. einen von den Signalen kannst dann ja muten
  87. sigitar

    Lightfoot Goatkeeper Effect on the AxeFX?

    Yes, thanks - that's what i'm looking for! But is it possible to create specific rhythms?
  88. sigitar

    Ein- und Ausschalt-Plop

    Ein ungeschriebenes Gesetz ist, die Lautsprecher als letztes in der Kette einschalten und als erstes beim Ausschalten! Damit werden die Lautsprecher geschont, denn es gibt bei jedem elektronischem Gerät ein Plop im Speaker.
  89. sigitar

    Lightfoot Goatkeeper Effect on the AxeFX?

    Hi! Is it possible to make a rhythmic Tremolo-Effect with the AxeFX - like the Lightfoot Goatkeeper or the Empress Tremolo? And - if yes - how? Thanks Sigi
  90. sigitar

    Ein- und Ausschalt-Plop

    Ist eigentlich normal. Immer Volume-Regler herunterfahren beim Ein- und Ausschalten! Bzw. auf standby schalten!
Back
Top Bottom