Search results for query: *

  • Users: volt
  • Order by date
  1. V

    Pink Floyd "On The Run" live performance

    Download link works. 👍
  2. V

    Line6 Relay G90 digital out possible?

    Nonetheless, looking forward to your findings. :) +1
  3. V

    FracTool - for power users only

    😅 Ah, then I misunderstood: Thought you decided to retire FracTool.
  4. V

    FracTool - for power users only

    Sad to hear, but I can only agree with unix-guy: Thanks for all the hard work!
  5. V

    Axe-Fx III Firmware Version 20.03 Release

    @rsvette12 DSP firmware (which this thread is about) does not include USB firmware. So updating the DSP firmware does not update the USB firmware. Each of these updates have to be done separately. As stated here the USB firmware update "is recommended for all Axe-Fx III units with USB versions...
  6. V

    Dimensions of the FM9

    https://www.fractalaudio.com/downloads/manuals/FM9/FM9-Owners-Manual.pdf#p126, chapter 15 "Specifications" ;)
  7. V

    JMP pre new firmware

    Since I have no A/B box I put the JMP-1 into the signal chain of the Axe-Fx in order to achieve fast switching between the original and the modelled amp using scenes. Some hours ago I had the chance to do a quick test with the guitar connected to the input of the JMP-1. Its "Master" output was...
  8. V

    JMP pre new firmware

    Another JMP-1 fan here! Initiated by @BBN 's post I grabbed my trusty JMP-1 (ECC83 tubes) to check how accurately I could replicate its sound on an Axe-Fx III running firmware 19.08. I already had a preset using the JMPre-1 OD2 model where I had recreated factory patch 004 "British Steel". Back...
  9. V

    Wish Proper Marshall JMP-1 Rig

    Yes, it has a power amp block like every amp model of the Axe. "Power Amp Modeling" can be turned off on the power amp page of the amp block (p. 12 of the Fractal Audio Blocks Guide). To my understanding this then corresponds to the pure preamp model of the JMP-1, i.e. to the real life rack...
  10. V

    New Satriani and Vai stuff out this month!

    +1
  11. V

    Poll: MK1 owners, 1024 User 2 cab slots or 32 FullRes cab slots?

    As a Mk 1 user, I couldn't try FullRes (yet). Although I cannot estimate whether I will use FullRes, I voted for it. IMHO the greater flexibility of being able to use FullRes outweighs the loss of a user cab bank in my opinion. I also think that Mk 1 and Mk 2 should (continue to) offer the same...
  12. V

    Oops I modified a factory pre-set, how do I revert?

    Unzip the downloaded file and browse the directory with the unzipped preset files using the preset manager of Axe-Edit III. From there you can pick the desired preset. I think it is also possible to drag 'n drop the preset file into the Axe-Edit III window. In either case don't forget to save...
  13. V

    Oops I modified a factory pre-set, how do I revert?

    You can download all factory preset here (section "Factory Presets").
  14. V

    Fractal-Bot 3.00.06 file selection (linux & wine)

    Importing presets in Axe-Edit III is also working again.
  15. V

    Fractal-Bot 3.00.06 file selection (linux & wine)

    Good news! Just tried Fractal-Bot 3.00.08 on Wine 6.5 and the selected firmware file is shown again in the white box next to the browse button :D OS: openSUSE Tumbleweed
  16. V

    Fractal-Bot 3.00.06 file selection (linux & wine)

    Discovered the same issue :( Due to lack of time I just went back to 3.00.05... but would be good to find a "real" solution.
  17. V

    Restore to factory

    You can download them here (section "Factory Presets").
  18. V

    F*&@#$^% Microsoft

    Yes, it is running on Wine with the constraint of a disappearing mouse cursor, but there is a workaround for that (to be found in the linked thread also).
  19. V

    FracTool - for power users only

    Can only report for Wine 5.10 running on Linux: No problem starting FracTool here; apart from that I only had the chance to play around a little and had no issues - but that was far from systematically testing ;)
  20. V

    Noob user needs help: Connected Axe FX III to PC for first time after installing Windows software...

    Did you install the Axe-FX III USB driver for Windows?
  21. V

    Closed Screenshot Axe-Fx III Screen via Axe-Edit

    Referring to h.c.e and chris I think there is no need for a screenshot function in Axe-Edit which should stick to it actual purpose imho.
  22. V

    Is arrived the time for Axe-Fx III to profile an amp?

    Well, the patent application publication already dates of November 10, 2016, so a descision might be expected "soon" ;)
  23. V

    Devin Townsend Live, starting in 45 minutes!

    It's such a pleasure to hear and watch Devin! Can't wait to see him live on tour again!
    • volt
    • Post #10
    • Forum: News
  24. V

    Shimmer Drive "Variable" clip type

    From p. 37 of the "Blocks Guide":
  25. V

    Compressor Block - Look ahead

    From p. 25 of the "Blocks Guide":
  26. V

    Where to download MFC-Edit

    +1
  27. V

    Buzz noise when connecting axe III to powerstage amp

    I think I would set the Axe-Fx to +4dBu turn the output level knob fully to zero and then carefully turn it up as long as the input of the PS gets not overdriven.
  28. V

    Buzz noise when connecting axe III to powerstage amp

    If the Powerstage should have a mono respectively an unbalanced input and you do not use a XLR-to-TS but a XLR-to-TRS cable, one line coming from the XLR output will not be connected on the Powerstage's side. I could image that this causes the buzz. So I would either try an XLR-to-TS cable or -...
  29. V

    FracTool - for power users only

    Blazing fast! Many thanks for your continuing effort!
  30. V

    MFC-Edit has Reached End of Life

    Many thanks to @bwanagary for creating, developing and maintaining this software during the last five(?) years! And a special thank you for providing Linux versions until the end ;)
  31. V

    FracTool - for power users only

    @AlGrenadine Thanks for the hint! UPX was the key: After decompressing FracTool.exe the resulting .exe works as exptected. :)
  32. V

    FracTool - for power users only

    @AlGrenadine Just as SensaiLee I am experiencing the same issue with WINE (currently version 5.x) under Linux since Fractool 3.39. Of course WINE is not the same as native Windows but the symptoms are identical to what SensaiLee described. Unfortunately I had not time to investigate more, it...
  33. V

    AFIII My new song "Sleeping Dog" - Euro Blu Modern amp

    Fantastic!
  34. V

    AES Output level too hot

    Coming from firmware 5.8 my impression was that after updating to firmware 6.x the output level generally has increased. Presets have not been edited after the update and factory presets are affected as well as presets created by myself. Power amp modelling is on. I am using an FC12 with two...
  35. V

    AES Output level too hot

    Yes, I think I have observed this, too. Will check again.
  36. V

    Axe-Fx III phasing issues?

    +1
  37. V

    Hold to scroll

    +1
  38. V

    Any interest for a free Bluetooth MIDI adapter for gen2 and 3?

    Sorry, no in depth knowledge of alsa here and unfortunately too occupied by the day job atm to dive in :(
  39. V

    Axe-Edit under Wine, do we need an ALSA setup?

    Great you got it working!
  40. V

    Axe-Edit under Wine, do we need an ALSA setup?

    @Sully Maybe one thing to make clear: You don't have to use axefx2setp.sh and AlbertA's packages. Both have the same aim but they install the necessary .hex and .rules files with different names in (partly) different locations. I would recommend to use only one method. If you opt for AlbertA's...
  41. V

    Axe-Edit under Wine, do we need an ALSA setup?

    Ok, this message appears if the file "55-fractalaudio.rules" has already been installed, probably by running axe2setup.sh before. Could you please post the content of "55-fractalaudio.rules"? You can post the output of cat /etc/udev/rules.d/55-fractalaudio.rules Please post the output of whereis...
  42. V

    Axe-Edit under Wine, do we need an ALSA setup?

    AlbertA is right: Don't (try to) install the Windows driver. This won't work on Linux and is not needed. Did you run the script (axefx2setup.sh) as root? Did you see any errors? If so please post them or pm me. Also: What version of the script do you have? For using Axe-Edit you only need the...
  43. V

    Jmpre-1 tonestack

    I get a pretty exact replication of the tone of my original JMP-1 using the formula I posted some time ago: https://forum.fractalaudio.com/threads/jmp-1-over-the-brit-pre-anyone-using.124628/#post-1482447 Don't forget that the Axe-Fx models a power amp, too, which colors the sound. So for a...
  44. V

    What is involved to program MFC101 for AXE FX III?

    Yep, did that. And what are the first three sentences about? :confused:
  45. V

    What is involved to program MFC101 for AXE FX III?

    Hm, while the thread title is about programming the MFC for the Axe-Fx III the post itself seems to be about registering MFC-Edit... if I didn't misread it.
  46. V

    What is involved to program MFC101 for AXE FX III?

    I would PM bwanagary. He is the developer of MFC-Edit.
  47. V

    Devin Townsend. Devin FRAKKIN' Townsend

    FracTool shows Axe-Fx II XL+
  48. V

    FracTool - for power users only

    Donated. Happily running FracTool on Linux using wine. Keep up the great work!
  49. V

    [Linux] USB issue when powering on unit

    Kernel 4.18 will be ready for the Axe-Fx III: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=126f7051b4daa3716d9af2851dcb55316e4c2b25 :D
  50. V

    Hardware question regarding IN and OUT 3/4

    Does anybody know if the L and R connectors of input 3 respectively 4 are connected to the same ground (without galvanic separation)? Same goes for the L an R connectors of outputs 3 and 4. Still being on the waitlist for an Axe-Fx III, so I just can't check myself ...
  51. V

    [Linux] USB issue when powering on unit

    Excellent!
  52. V

    FracTool - for power users only

    Don't want to derail the thread too much, but what exception do you get? Edit: According to AlGrenadines previous post this might have become obsolete ;)
  53. V

    FracTool - for power users only

    If I am not mistaken I am running wine 3.8 and FracTool 2.72 starts without issues. Edit: Some more info OS: openSUSE Tumbleweed 64bit Graphics card: Radeon HD7750 OpenGL: 3.0 Mesa 18.0.3 (according to the result of glxinfo | grep "OpenGL version") wine: 3.8 (just checked)
  54. V

    [Windows] USB overflow issue every time stream starts

    Appreciating your efforts very much. So even though not using Windows: Many thanks for investigating!
  55. V

    [Fixed] Linux: USB Overflows

    Awesome!
  56. V

    [Fixed] Linux: USB Overflows

    Fantastic! Thanks a lot, AlbertA!
  57. V

    [Linux] USB issue when powering on unit

    ... would have been too easy ;) Thanks for checking.
  58. V

    [Linux] USB issue when powering on unit

    @AlbertA What kernel version are you running? For kernel 4.16 there has been a fix for UAC2 get_ctl requests with a range attribute. Don't know this affects the issue and sadly don't have the time ATM to have a deeper look into it ... and no Axe-Fx III for quick test as still being on the wait...
  59. V

    archive.axefx.fr : the BIG Axe-Fx I/II/III/AX8/FX8/FM3 archive

    +1 Many thanks, AlGrenadine.
  60. V

    Is the brit pre good enough?

    Is it +/- 6 dB on the real JMP-1 or +/- 8 dB as quoted in the wiki and here? I was'nt able to find the source of the citation though.
  61. V

    Just downloaded Firefox Quantum

    Noscript is available now for FF57, too.
  62. V

    MFC-101 (first edition) and Axe Fx II XL+

    It will work. If you want to use FASlink you will need an XA-2 adapter. For more information have a look at axefxtutorials.com and the WIKI: MFC-101 and FASlink. :)
  63. V

    Line6 Relay G90 digital out possible?

    @Martin Silbernagl Very interesting information, if we knew the missing parts I surely would get a G90 and try to retrofit the digital out(s). Yes, the DIT4096 has a hardware mode... if that is the mode it is set to, I would assume no firmware support would be required. Do you address a...
  64. V

    AX FX to Onyx-Blackjack to PC - Clean tone only

    Oh yeah, for merely a second I had thought of the bypass, too, but as the effects were to hear through poweramp + cab I dropped that... Glad it works! :)
  65. V

    AX FX to Onyx-Blackjack to PC - Clean tone only

    Hm, no more ideas for the moment... if you hear the effects when connected to your poweramp + cab you should hear them through the Blackjack, too - assuming you do the connections in the same way as with the poweramp.
  66. V

    AX FX to Onyx-Blackjack to PC - Clean tone only

    You could run output 1 left and right to mic-pre 1 and 2 or do you connect output 1 right to your poweramp?
  67. V

    AX FX to Onyx-Blackjack to PC - Clean tone only

    Great you have tone. Do you hear the effects when you connect the Axe-FX to powered speakers / amp with passive speakers? I just saw you connected output 1 left and output 2 right of the Axe-FX to the inputs of the Blackjack. Why is that? For now you may try only output 1 (left and right).
  68. V

    AX FX to Onyx-Blackjack to PC - Clean tone only

    I don't know the Onyx Blackjack but the following questions came to mind: Did you set the switch above the gain knobs to "line"? Do you have a signal on the phones and/or monitor outs of the Blackjack? Did you try the Blackjack with another source than the Axe-Fx and have a signal in audacity...
  69. V

    Mark I presets question

    +1
  70. V

    Mark I presets question

    In Axe-Edit choose Tools -> Axe-Manage Presets respectively Axe-Manage Cabs. There you can mark all presets / cabs and delete them at once, I think (not in front of Axe-Edit right now).
  71. V

    FracTool Online : See AxeFx/AX8 axechange presets online

    Wow! Very, very nice!
  72. V

    AX8-Edit on Linux [Solved]

    Glad it works :)
  73. V

    AX8-Edit on Linux [Solved]

    I have no AX8, so I can just install and start AX8-Edit without really using it. I am using openSUSE Tumbleweed 64bit with Wine 2.4. For me AX8-Edit crashed right after the first start with an "Unhandled exception: page fault on read access to 0x00000000 in 32-bit code (0x00510afb)." But after...
  74. V

    Axe XL+ won't start up after firmware update

    Yes, good hint. I just assumed this prerequisite to be fulfilled :)
  75. V

    Axe XL+ won't start up after firmware update

    As TieDyedDevil I've done firmware updates from the Linux command line using amidi. No problems - you just have to set the Axe-Fx to update mode using the front panel (Utility -> Firmware).
  76. V

    [Fixed] Linux: USB Overflows

    Updated openSUSE Tumbleweed to kernel 4.10 last night and right now playing music over the Axe-Fx II since more than two hours. No buffer overflows with USB buffer size set to 64. :) Thanks again and congrats @AlbertA!
  77. V

    Line6 Relay G90 digital out possible?

    Many thanks for your effort! The pictures clear it up that refitting a digital out is not doable with acceptable time and effort (at least for me). :(
  78. V

    jmp-1 over the brit pre anyone using?

    :D
  79. V

    jmp-1 over the brit pre anyone using?

    From the thread https://forum.fractalaudio.com/threads/im-confused-about-modeling-a-jmp-1.110637: Based on the information that the tone controls of the original JMP-1 cover a range from -8dB to +8dB while the ones of the JMPre-1 model range from -12dB to +12dB, the following formula should...
  80. V

    Line6 Relay G90 digital out possible?

    Yes, I guess AES/EBU was a feature that was cancelled (see link in post #1) after the first spec sheets had already become public.
  81. V

    axe fx with wireless jack

    +1
  82. V

    Line6 Relay G90 digital out possible?

    Sadly no. I never got my hands on a G90... IMHO it's a shame that also newer systems (also from other manufacturers like Shure or Sennheiser) didn't get a digital output.
  83. V

    BOOT ROM / MKII * HELP *

    In a fail-boot scenario disconnect the Axe-Fx from power, carefully open the case and place the jumper over J26. I would recommend to ground yourself when working inside the Axe-Fx. Then reconnect power and turn the Axe-Fx on. Install the desired firmware and power off the Axe-Fx again...
  84. V

    [Fixed] Linux: USB Overflows

    The fix seems to make it into kernel 4.10: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ce38207f161513ee3d2bd3860489f07ebe65bc78 :)
  85. V

    [Fixed] Linux: USB Overflows

    Awesome!
  86. V

    [Fixed] Linux: USB Overflows

    Just glanced through the USB specs. Maybe it is because according to section 9.6.6 of the USB 2.0 spec a feedback endpoint (explicit or implicit) needs to be associated with one (or more) isochronous data endpoints to which it provides feedback service. The specs state that the association is...
  87. V

    [Fixed] Linux: USB Overflows

    Great! Thanks for investigating and creating the patch.
  88. V

    New and free! Re-captured Carvin Legacy VL212 G12M CabPack – RNDI version

    Hi PerChr, finally found a little time to try out your IRs (well, some of them). After we just got the new Legato model, I decided to start with this amp surprisingly ;). Since time was rare I just managed to experiment with the SM57 series. Using an alder body guitar with Ionizer 7 PUs I found...
  89. V

    Axe-Fx II "Quantum" Rev 4.01 Public Beta

    It may come true :)
  90. V

    Axe-Fx II "Quantum" Rev 4.01 Public Beta

    I would also vote to let go the option to choose the amp modeling version as the latest version would be considered as the most advanced / authentic one - and authenticity is the primary goal of modeling IMHO.
  91. V

    Upgrade or not.

    FracTool is also available for Mac. There is a thread where you find the download link in the first post. :)
  92. V

    Bug? MFC-101 Mk III - display freezing

    Update: It seems the issue occurs when the DOWN/DECR switch is or gets pressed down and switch 5/SETUP gets hit at the same time/a very short time later. At least I have been able to reproduce the issue two times this way and it could well be that the problem never occured while saving a preset...
  93. V

    Bug? MFC-101 Mk III - display freezing

    Thanks iaresee, a faulty cable has been my first thought, too. Therefore I already changed the cable right after the first occurence of the freeze - sorry I did not mention... after the last freeze I changed back to the previously used cable, edited and saved round about 50 presets (from the...
  94. V

    Bug? MFC-101 Mk III - display freezing

    I have an Axe-Fx II (original) and MFC-101 Mk III (firmware version 3.08). They are conncected through FASLINK using an XA-1. Don't know if it is just a coincidence, but since updating my Axe-Fx II to Quantum 4.00 I had the display of the MFC freezing two or three times. While the switches of...
  95. V

    Axe-Fx II and Linux (again)

    "Inspired" by qonsar's mishap above, I modified the script a little. In case fxload has been found in multiple locations, the script now preselects the one found at first. The user just needs to acknowledge the preselection to proceed. This way the risk of entering a wrong path to fxload should...
  96. V

    Axe-Fx II and Linux (again)

    Just to clarify: The AX8 (and FX8) don't need to (and can't) be loaded with USB firmware like it is necessary for the Axe-Fx II models. So the approach to get the Axe-Fx II working as a USB soundcard under Linux does not apply to the AX8 and FX8.
  97. V

    Axe-Fx II and Linux (again)

    I have no access to an XL/XL+, so I cannot test this. But it should work, as the driver for all Axe-Fx II variants is the same which leads me to the conclusion that the XL/XL+ uses the same USB firmware file as the Axe-Fx II. The USB firmware is the essential part to get the Axe-Fx II working as...
  98. V

    Is there an easy way to keep up on firmware updates??

    +1
  99. V

    Axe Fx II making a weird noise

    AFAIK there are no relais / mechanical switches inside the Axe-Fx II but the only moving part is the fan. If your Axe-Fx is out of warranty maybe open the lid to have a look if the fan is running properly - or to discover where else the sound has its source. Be careful when opening the Axe-Fx as...
  100. V

    Advice, if your touring/gigging, or just impatient, order a spare PS

    Hm, yes. It could be worth a try and open a support ticket, to see if FAS would sell an EPROM even if your Axe-Fx has no problem now but just to be prepared...
Back
Top Bottom