Search results for query: *

  1. M

    Matrix customer service

    It was a pleasure serving you Mike. Best regards Matt
  2. M

    To stick with Matrix or not

    Good evening. With the amps shipping direct from Ventura CA I think it would be worth contacting the office on the following phone number copied and pasted from the MatrixAmplification site. Or, send me your cell and we shall be happy to call you. Many thanks Matt ..." Now Shipping Direct From...
  3. M

    Matrix gt800, parallel vs bridge mode

    The parallel mode sends input A into both sides of the amp. You would still use both level controls the adjust each output, allowing you to balance levels between cabs/speakers with different sensitivities. Hope this helps. Cheers Matt
  4. M

    MATRIX AMPS SERVICE IS GOLD

    We think that customers deserve a great level of service both before making their purchase and just as importantly, afterwards. I shall be on vacation for a while and will be away from a reliable internet connection. To make sure you have a point of contact for any of your queries whilst I...
  5. M

    MATRIX NL12 (Neo Light) Unboxing Review Video (SOLOAWEEK)

    My apologies for the inbox sir, More space is available now My best regards Matt
  6. M

    Any Matrix users in the Tampa, FL area???

    For studio use the 2u is definitely the best choice. We built is specifically for that application to keep the fan noise as low as physically possible. Best regards Matt
  7. M

    NL12 Neolight ( 17lb ) are in stock ready for shipping

    Hi there. If you are already on the 1x12 and 2x12 mailing list you will be receiving the information before anyone else on the release date for the 2x12. My best regards Matt
  8. M

    Waaaoo do you see the NL12 by Matrix

    Two NL12 is parallel will present a 4 ohm load. Provided your head is happy with 4 ohms then you will be fine :) - and very loud whilst still able to lift both cabs in one hand. My best regards Matt
  9. M

    NL12 Neolight ( 17lb ) are in stock ready for shipping

    The NL12 Neolight ( 17lb ) are in stock ready for shipping. Tom Quayle shot a quick video before he flew out to the Dweezilla Camp where he used a pair of NL12's More info available at: NL12 Neolight Cab :: Matrix My best regards Matt
  10. M

    The new MATRIX GT800FX. THE amp for THE Axe-Fx

    If you are playing just one cab the GT800FX will plenty of power, however there are more differences between the GT800FX and GT1000FX than the power rating. Please have a look at the video from Pete Thorn below to hear both working. I look forward to hearing from you if you have any questions...
  11. M

    should I sell my mackie hd 1221?

    Does anyone near you have any of the kit that you are interested in trying together ? As Rex says, they only person that can know if you will be happy with a given setup is yourself. I suggest finding a way to try whichever combination appeals to you and see if it makes you happy. Best regards Matt
  12. M

    The new MATRIX GT800FX. THE amp for THE Axe-Fx

    Hi there, Sorry you are having a problem with your amp. Please email me at matt@matrixamplification.com and we will get you up and running. Can you please confirm which speakers you are running on the outputs and whether you are playing stereo / mono etc. I look forward to hearing from...
  13. M

    Waaaoo do you see the NL12 by Matrix

    We will soon be shipping the lightweight guitar cabs. More information available at Products :: Matrix Best regards Matt
  14. M

    CFR/Q12 users in NW UK ?

    My apologies Phil, it fills up pretty quick these days :) I have cleared some room now. If it is ever full you are welcome to send me an email at matt@matrixamplification.com I look forward to hearing from you. My best regards Matt
  15. M

    Matrix considering 2x12 Vertical FR cab, nice!!!

    I look forward to sharing information soon. I think its going to make you smile. My best regards Matt
  16. M

    Matrix GT1000 vs. Valve amp Peavey 50 50 classic

    Hi there, You are welcome to contact me on matt@matrixamplification.com and I shall do my best to help you. My best regards Matt
  17. M

    Matrix Q12 or CFR12

    Hi there, Whilst I can not give out customers details I am sure the good folk on this forum will be able to suggest someone that could be of use to you. My best regards Matt
  18. M

    Matrix Q12 or CFR12

    Hi there, The are both £480 excluding VAT and duties. Best regards Matt
  19. M

    Matrix Q12 or CFR12

    Hi there, The CFR12 wedge and the Q12 passive cab are the same price. Please see the following page for prices: Products :: Matrix Hope this helps Best regards Matt
  20. M

    Matrix Q12 or CFR12

    Hi there, We are glad that you are enjoying the setup. Best regards Matt
  21. M

    Matrix considering 2x12 Vertical FR cab, nice!!!

    Hi there, I thank you for your patience. You have not missed any updates that have been sent out. We are still working on the 2x12 vertical. We are making sure that peoples patience will be rewarded with the quality of the 2x12 that gets released. I look forward to sharing more information as...
  22. M

    Idea for Singing Guitarist Setup w/Matrix and XiTone

    Hi there, Theres a fair bit of choice for the 1u mixers. I have an ARX in a rack that works brilliantly. For a smaller gig you could throw a backing track through your mixer as well. Best regards Matt
  23. M

    Matrix CFR12

    Hi there, Please shoot me an email to matt@matrixamplification.com and I will be happy to either give you a call, or reply with a quote for you. My best regards Matt
  24. M

    New To Fractal Axe 2

    Hi there, Congratulations on your imminent purchase of the Axe 2 + MFC setup. The best rack mount power amp solution for you will depend on a few factors. Will you be stowing your Fractal and Amp solution overhead on internal and international flights = Head for 1u solution to keep as compact...
  25. M

    My Matrix GR1000Fx just died on me Matt your inbox is full

    This one has got four outputs XT4004EQ - XT 4 Channel Series Now on to a more serious answer. I believe the question asking for two outputs per channel would be to run two cabs per side, if the first cab you are going to does not happen to have a link out. You could achieve the same thing...
  26. M

    MATRIX AMPS SERVICE IS GOLD

    I have been known to partake of the occasional mug of Java :)
  27. M

    Why Matrix?

    Sometimes its good to share :)
  28. M

    My Matrix GR1000Fx just died on me Matt your inbox is full

    Hi there, My apologies for the delayed reply. I am clearing more space in the inbox now. If when pressing the power button on there are no internal lights the fuse is normally the best place to look first. Glad you are up and running again. Best regards Matt
  29. M

    not going to get any sleep

    On the way back from work you might want to pop into a pharmacy and pick something up for sore fingers :) Best regards Matt
  30. M

    MATRIX AMPS SERVICE IS GOLD

    I promise that I am not a robot. I just enjoy helping where I can. My best regards Matt
  31. M

    Why Matrix?

    Hi there, We do like the Speakon connectors, no chance of them being pulled out. Best regards Matt
  32. M

    Best neutral power amp choices

    Hi there, I am sorry that we are not going to be able to make that show. If you email me at (matt@matrixamplification.com) I will be happy to call you back and help you in any way I can. I look forward to hearing from you. My best regards Matt
  33. M

    Best neutral power amp choices

    Hi there, Please let me know where you live and I shall do my best to help if you decide that you would like to try the Matrix. My best regards Matt
  34. M

    Matrix GT1500FXBD 2U?

    Hi there, Thanks for your interest. We do not have a release date for the GT1500FX 2U as yet. If you would like to email me at matt@matrixamplification.com I will make sure that you are kept up to date with the developments of the 2u. I look forward to hearing from you. My best regards Matt
  35. M

    GT1000FX Signal and Protect LED's, what are they really?

    Hi there, There is an explanation of the signal lights over at the FAQ , to which I have listed the link below. Please do email me with your phone number so that we may go through it together. I look forward to hearing from you. My best regards Matt FAQ URL = F.A.Q. :: Matrix...
  36. M

    Matrix GT1000FX 2U review

    Glad you are liking it. I will pass your thoughts on Andy, who is the man responsible for all of our creations. My best regards Matt
  37. M

    Spent the day at Matrix Amps!

    We will be sharing release information as soon as possible. I thank you in advance for your patience and hope that you will find it is rewarded with the quality of the speaker :) My best regards Matt
  38. M

    Connectiong Axe Fx II-MatrixGT1000FX- MatrixQ12 (eventually FOH)

    Hi Cello, I saw your email and replied to it this morning before I saw your post online. I shall copy the reply here just in case you read the forum before your mail later. Please let us know if you have any questions. My best regards Matt "... The Q12 is a single speaker loaded with one...
  39. M

    Spent the day at Matrix Amps!

    The horizontal 2x12 was at approx 25kg earlier in the R&D cycle. More details will be confirmed shortly. My best regards Matt
  40. M

    Matrix plus trad cab and pass clr?

    Hi there, You could even run FRFR from output 1 into channel A of the Matrix, then into an FRFR passive cab and output 2 to channel B feeding a guitar cab. This way you get to use both channels of the GT1000FX :) Best regards Matt
  41. M

    So a question for you guys using the Matrix GT1000FX into a real cab

    Hi there, I am sorry that your knob is not centered. We do soak test and visually inspect every amp in the production facility as part of the build process. We have even designed the packaging to try and ensure that all of our creations get to our customers hands in the same condition that we...
  42. M

    May we please have your input on trim / handle preferences ?

    Thanks for your feedback. It is really appreciated. My best regards Matt
  43. M

    My matrix GT800fx flashed and died...

    Hi Joe, Sorry you are experiencing an issue with your amp. Please forward me your phone number to Matt@matrixamplification.com and I shall call you back. I look forward to talking with you. My best regards Matt
  44. M

    May we please have your input on trim / handle preferences ?

    This cab has been created as mono, with speakers that Andy is having built for Matrix within Europe. ( His relationships established over 30 years within the pro audio industry have enabled us to have something truly special created ) My best regards Matt
  45. M

    So I took the plunge today an ordered a Matrix GT1000FX 1 U

    Hi there, We are really pleased that you are enjoying it. My best regards Matt
  46. M

    May we please have your input on trim / handle preferences ?

    Hi there, We have moved factory and are continuing with R&D. We would like your input on which trim and handle preferences you would prefer to see on a 2x12 horizontal FRFR cab. Trim choice examples Handle choice options We look forward to your thoughts. My best regards Matt
  47. M

    Matrix considering 2x12 Vertical FR cab, nice!!!

    Hi there, We are still working on the vertical 2x12 at the moment and will be updating you with our progress. We would rather wait and make sure it is perfect before we share it with the world, in the meantime we would like your feedback on the horizontal 2x12. There are a few questions I...
  48. M

    So I took the plunge today an ordered a Matrix GT1000FX 1 U

    Hi there, We do have a trial period in place to ensure that you are perfectly happy with your purchase. We look forward to hearing your feedback and seeing a photo of your setup when you get a chance to take one. My best regards Matt
  49. M

    A question about Passive FRFR Cab, Matrix, Atomic or others.

    Hi there, Would you like the 2x12 because you play in stereo ? I look forward to hearing from you. My best regards Matt
  50. M

    Matrix GT1000 - Output level questions and clarity

    Hi there, Were you running a mono signal in to channel A, with the switch set to bridged and using the central bridged output to the 16ohm mono input of your cab ? In which case you would have up to 650 watts available ( the sum of the outputs into an 8 ohm load ), to play into your 40 watt...
  51. M

    New Matrix Q12s, Foreshadowing?

    Hi there, These are the Q12's and these are the CFR12's Hope that helps. Best regards Matt
  52. M

    New Matrix Q12s, Foreshadowing?

    Hi there, Glad you are enjoying the Q12's :) I shall pass your thanks onto Pam and Andy. My best regards Matt
  53. M

    Matrix Q12 and Vocals

    Your welcome :) The GT1600FX is a GT1000FX with more power, which we created for bassists wanting to power large cabs. Let me know if you have any questions and I shall do my best to help. Best regards Matt
  54. M

    Matrix Q12 and Vocals

    We have very positive feedback from bands who have put their vocals through the Q12's I expect that you will only need the GT1000FX to power a pair, unless you had a need for the GT1600FX to power something else with greater power demands. I hope this helps. Please let me know if you have any...
  55. M

    Matrix Stuff!

    Hi there, There is a comparison video of the GT1000FX and the GT800FX here: Hope that helps. My best regards Matt
  56. M

    Matrix Support

    Hi Tamerz, We have completed the move to the new factory. You will have the RMA number today. I thankyou for your patience and apologise for the delay caused by our move. My best regards Matt
  57. M

    'Almost' Full Range System

    That looks great. Good work Mike. Best regards Matt
  58. M

    Matrix Q12 on the way, need advice!

    Hi there, There is not a huge difference in power output between the GT800FX and the GT1000FX when you compare the outputs into an 8 ohm load, ( 350 watts vs 260 watts ), both of which can be turned down so as not to disturb the neighbours. I look forward to hearing your thoughts when the Q12...
  59. M

    Anybody Know when the Matrix 2x12 is coming Out?

    Hi there, We have not sent an update as yet, so you have not missed any information. We will not release it until we are sure it is going to put a huge smile on people ears. I thank you for your patience, which I think you are going to find was worth your while. My best regards Matt
  60. M

    Anybody Know when the Matrix 2x12 is coming Out?

    Hi there, If you have not already had a chance to do to, please sign up on the list below: 2x12 FRFR Pre-Release Info And we will share information with you as soon as it is available. My best regards Matt
  61. M

    Matrix Power Amp - Stupid Question...

    Hi Joe, I would suggest setting your patches for the loudest method you would use the amp. Crank the Matrix, set the output on the FAS to give you the max power you would ever want to use in the loudest of your gigs. Then either dial back the FAS, or wind down the attenuation pot on the Matrix...
  62. M

    PowerAmp suggestion for the Axe-Fx II..

    There are international touring artists using the Axe + GT1000FX to power traditional cabs. Most of them are using the GT1000, in 1u form to keep the rack space as dense as possible. Please let me know if you have any questions, via pm or email and I shall do my best to answer them for you...
  63. M

    Not enjoying Matrix....Mesa 20/20?

    Hi there, This should be perfect for you. GT1600FX 2u Rackmount Amplifier :: Matrix Please let me know if you have any questions. My best regards Matt
  64. M

    Not enjoying Matrix....Mesa 20/20?

    Hi there, Yes, all of the Matrix range are class AB MOSFET, even the XT7000MF 7000 watt one we use for large bass arrays. Steve Stevens has been using 2 x GT1000FX for over a year. He AB'd it against the V800 and thought it sounded better. The fact it weighs less and takes less space was also...
  65. M

    Matrix Q12a is out

    Hi Chayadem, We have not planned to release an active version of the CFR12 as yet. We do have the active version of the Q12 available and are working on the R&D for the 2x12's. Please let me know if you have any questions. My best regards Matt
  66. M

    Matrix 10002U and speaker cabs

    Your welcome :)
  67. M

    Matrix 10002U and speaker cabs

    Hi Gary, You can run just one cab, ( in stereo mode or mono mode, or bridged if your cab has a high enough power rating ) If you a using channel A or B you will need to stay at 4 ohms or above, You can use mismatched loads on the channels. ie 4 ohms on channel A and 16 ohms on channel B will...
  68. M

    small power amps

    Hi Chris, Please let me know if you have any questions on the GM50. I will be happy to help you. My best regards Matt
  69. M

    Anybody Know when the Matrix 2x12 is coming Out?

    Hi there, We had been asked to create a lightweight guitar cab. This is not FRFR. Details for the guitar cab will follow shortly. However, there is a picture of the FRFR Slant Top 2x12 version we are working on over on facebook http://www.facebook.com/MatrixAmplification My best regards Matt
  70. M

    Anybody Know when the Matrix 2x12 is coming Out?

    Hi all, The list for the 13kg 2x12's is here : 2x12 Pre-Release Info I look forward to sharing more information with you. In the meantime please do feel free to join the list the receive the information in your email box as soon as it is available. My best regards Matt
  71. M

    Matrix GT1000/Q12 vs Atomic CLR Active Cab Comparison

    I was at the Axe Fest 2012, around October from memory. We had no Q12's there, they had not been released at the time. Best regards Matt
  72. M

    Atomic Active Cab vs. Matrix Q12a

    Hi there, It is the same driver used in both, though the internal volume of the Q12 is slightly higher than the volume within the CFR12. Best regards Matt
  73. M

    Matrix GT1000/Q12 vs Atomic CLR Active Cab Comparison

    Hi JLP. The first ten hours will do a lot more than the next ten. If you play some music through the Q12 it will open up very nicely, plus you get the benefit of listening to some good music. Best regards Matt
  74. M

    Replacing fans in a Matrix GT800FX

    Hi there, I am sorry the noise is a little too high for you. The fans in the GT800FX and GT1000FX 1u are 38mm You may be able to fit a 40mm fan in, but expect that you might have to do a little filing of the fan chassis. Alternatively, if you would rather upgrade to the GT1000FX 2u send me an...
  75. M

    Matrix GT800FX vs GT100FX for Ultra?

    Good morning, As Paul said above the GT1000FX is flat. If you bounce me a mail ( matt@matrixamplification.com ) I will send you a quote including shipping for the GT800FX and GT1000FX. I look forward to hearing from you. My best regards Matt
  76. M

    Richard Williams new rig,

    Richard Williams new rig, Axe Fx II + Matrix GT1000FX. He sent us an email which read. "I've had a few days to work with it, and I love it. The Mesa 90/90 has retired. "
  77. M

    Steve Stevens new interview

    Steve Stevens interview is up on Guitar Interactive - head on over to watch, - also includes the results of Steves AB tests between the HH V800 and the GT1000. Guitar Interactive Magazine - Issue 16: Feature - Steve Stevens Best regards Matt
  78. M

    Matrix GT1000FX......not yet convinced. Any help?

    Hi there, If you bounce your phone number to me (matt@matrixamplification.com) I shall give you a call to go through a few things. Look forward to hearing from you. My best regards Matt
  79. M

    Active Matrix Q12 or get a matrix power amp?

    Hi Gordon, Glad your enjoying it :) Best regards Matt
  80. M

    Matrix considering 2x12 Vertical FR cab, nice!!!

    The angle on the top driver serves a purpose which helps the overall sound heard out in front of the cab. We will share weight information, overall dims etc soon. My best regards Matt
  81. M

    Matrix Q12A Case

    Thanks for the heads up. Best regards Matt
  82. M

    Matrix considering 2x12 Vertical FR cab, nice!!!

    They sound great either way. The passives can be driven the the GT1000FX, which will sound the same as the actives being driven with the internal module. If you already have the GT1000FX a pair of these should let your neighbours enjoy your playing. My best regards Matt
  83. M

    Matrix considering 2x12 Vertical FR cab, nice!!!

    These will be available in active and passive form. If you would like to receive an email with the information for these as soon as it is available please signup on the list below. 2x12 FRFR Pre-Release Info I look forward to sharing more information with you. Best regards Matt
  84. M

    Matrix GT1500FX - Protect light on solid and will not go off

    Hi there, Sorry you are experiencing a problem. Please email me your phone number to matt@matrixamplification.com and I shall give you a call. ( cell or landline will both work fine ). Best regards Matt
  85. M

    Another Matrix GT1000FX Review

    I am reliably told its not the size, its what you do with it :) That rack sits on castors so we just wheel it to the van. Amps in total about 54kg so easy two man lift onto back of van if the tail lift is not working. Best regards Matt
  86. M

    Another Matrix GT1000FX Review

    Hi there, The heat generated within the GT is exhausted from the rear of the case using a single 80 mm fan. ( This larger fan running at a lower rpm is responsible for the lower noise floor than the two 38mm fans used in the 1u chassis ). You could stack ten amps on top of one another and leave...
  87. M

    Lightweight Matrix 2x12 Guitar Cab

    We will grab its bottom end in the studio shortly. Now time for ask for a little feedback - would you prefer black or silver corners ? Both shown below. Look forward to hearing from you. Best regards Matt
  88. M

    Speaker box question for you cabinet builders

    Was generally thinking that if setup time was talking longer than you wished a hybrid cable between the rack and the rcf may save you a bit of time ( less time untangling etc ). Best regards Matt
  89. M

    I need a huge favor in regards to CLR/Q12

    During that recording it was running passive. Sounds the same in active mode :) Please let me know if you have any questions. Best regards Matt
  90. M

    I need a huge favor in regards to CLR/Q12

    We are going to re-record this, but here is something for the guys that wanted to hear drop tuned A 7 string through an Axe II and Q12a. Clarky has already given some feedback on the sound in the room, ( which put a smile on my face whilst trying to capture it for you ). Best regards Matt
  91. M

    Lightweight Matrix 2x12 Guitar Cab

    We are going to re-record this, but here is something for the guys that wanted to hear drop tuned A 7 string through an Axe II and Q12a. Clarky has already given some feedback on the sound in the room, ( which put a smile on my face whilst trying to capture it for you ). Best regards Matt
  92. M

    The total cost for a Matrix GT1000FX to the USA

    We aim to please ;) Best regards Matt
  93. M

    Matrix GM50 suitable power amp for IR capture?

    Hi Richard, We are aware of artists using the GT1000FX to capture IR's. The GM50 is based on the GT1000, but with a little less power. I would expect it to work fine for you. Please let me know if you have any questions. Best regards Matt
  94. M

    Lightweight Matrix 2x12 Guitar Cab

    Hi there, I will finish tidying sound as best as possible before uploaded later tonight. Will definately hook up with Clarky in a room less condusive to standing waves and capture both the 7 string dropt tuned again, and a bass. Best regards Matt
  95. M

    The total cost for a Matrix GT1000FX to the USA

    Hi there, Please let me know if we can be of any assistance. My best regards Matt
  96. M

    Lightweight Matrix 2x12 Guitar Cab

    Hi there, Yes there are issues with FRFR 2x12. You can hear the effect on the sound by stacking 2 coax 1x12's side by side and walking across in front of them. :) In answer to somewhere to put your 4 unit rack did you see the photos from the Birmingham show this last weekend ? The rest of...
  97. M

    Lightweight Matrix 2x12 Guitar Cab

    Hi there, Please keep an eye out today. There was a lot of bass generated in the room we were recording in. That drop A was certainly reproduced :) Many thanks Matt
  98. M

    Lightweight Matrix 2x12 Guitar Cab

    We showed our new lightweight 2x12 guitar cab at the Great British Guitar show in Birmingham this weekend. The cab weighs 13kg and is loaded with 120 watts worth of driver utilising neodymium magnets. We will also be offering the cab in the same format loaded with V30's. To receive...
  99. M

    QQ

    The cab weighs 13kg and is loaded with 120 watts worth of driver utilising neodymium magnets. We will also be offering the cab in the same format loaded with V30's. More information will be available soon, and will be released on our social media sites first. Best regards Matt
  100. M

    Speaker box question for you cabinet builders

    The setup would be in a normal rack case, hence added weight which might be more of a disadvantage if you encounter stairs on load in / loud out. Just a quick thought, is it always one Nx12 ? Best regards Matt
Back
Top Bottom