Search results for query: *

  1. atomicriffmaster

    5150 Metal Clip/Patch

    Yeah the 5150 was always fizzy to me, but then again, I started to think why every record ever recorded was done with a 5150 (huge funny overstatement but kinda true). So I started testing it out in a mix and realized how much potential it has in a mix situation. Crazy how something can sound so...
  2. atomicriffmaster

    5150 Metal Clip/Patch

    Well I never use the 5150 patch at all and at this point I am beginning to wonder why . . . you can kinda do anything with it and it'll sound half decent. Just thought I'd share my findings. Clip http://dl.dropbox.com/u/39663225/Studio%20Audio%20Eng.%20III%20Final%2011-18-2011.mp3 Patch...
  3. atomicriffmaster

    Death Metal?

    Weird, I thought I changed that haha, sorry. On my patch I have the 2x12 Boutique with an e609 mic sim there.
  4. atomicriffmaster

    Teh Brootz Tonage Going on here guys

    Oh I got. Here's this just in case . . . http://forum.fractalaudio.com/ultra-std-recordings/41078-death-metal.html
  5. atomicriffmaster

    Teh Brootz Tonage Going on here guys

    Yipes, take whatever you have on your master bus and turn it down like 3-5db.
  6. atomicriffmaster

    Death Metal?

    So I got bored, and made this to have something to mix. I never usually write "death" metal type stuff but I just opened one of the Superior Drummer sample midi files and this happened. In retrospect, the Diezel amp sim is pretty dang dark but I think that's why it works so great in a mix...
  7. atomicriffmaster

    Nine Iron!!

    I don't even know how to respond to this . . . hahah.
  8. atomicriffmaster

    Axe-Fx Via 2in Tape!

    I totally see where you're coming from, especially with metal distorted guitars, because they're already pretty much square waveforms haha. From a mix standpoint though, I don't know what I would do without a compressor on a guitar master bus. And I have the real API 2500 and the Waves plugin...
  9. atomicriffmaster

    Axe-Fx Via 2in Tape!

    I used a Tom Anderson Bulldog with BKP Cold Sweats, the amp model was the Shiver LD. I also ran the Axe-Fx straight into an API 2500 so that gave it that nice leveled feel, but I bet a studio compressor block tweaked right would have much the same effect.
  10. atomicriffmaster

    Axe-Fx Via 2in Tape!

    So I had an old song in Pro Tools and was thinking about re-recording the guitars with Axe-Fx then bouncing to tape then summing back into Pro Tools. It was all well and good until I realized, "duh! I should just bounce drums and bass to tape then record guitars DIRECT to tape". Anyway, here's...
  11. atomicriffmaster

    Our new demos using Axe FX!

    Neat stuff, it's kind of like Steve Via, Lacuna Coil, and Paramore had a musical super baby or something.
  12. atomicriffmaster

    7 String Soldano Metal Patch

    Here's the guitar patch http://dl.dropbox.com/u/14827226/Axe-Fx%20Presets/Soldano%20Metal.syx And the bass patch http://dl.dropbox.com/u/14827226/Axe-Fx%20Presets/Metal%20Bass%20Rig.syx And nice, what part of Chicago? I'm from Beverly/Evergreen Park area.
  13. atomicriffmaster

    7 String Soldano Metal Patch

    So, I was testing out all the amps again after the 11.0 update and I landed on the slo100 sim, and went no further for the time being. I also decided to use the Axe for bass this time, I feel like the bass sims are VASTLY improved from the last version. Anyway, does anyone want the patch? It...
  14. atomicriffmaster

    Meshuggah DAR Amp patch attempt

    Here is what the patch looks like essentially (the filter has an envelope modifier, amps are HEAVILY tweaked, and the cab block is stereo) And here is the actual patch http://dl.dropbox.com/u/14827226/Meshuggah%20DAR.syx
  15. atomicriffmaster

    Meshuggah DAR Amp patch attempt

    I totally agree, I whipped this up on monitors, I should have definitely checked it on my headphones. The guitar is a Schecter c1+ (nothing special) with Cold Sweats in it.
  16. atomicriffmaster

    Das meshuggah Metall

    Was the sound of your patch anywhere in the posted video? Because that is straight from DAR's youtube channel . . .
  17. atomicriffmaster

    Meshuggah DAR Amp patch attempt

    Lately, more and more youtube clips of the new FBM DAR Amp have been popping up. And lately, I've been more and more obsessed with the tone it has hahah. Incidentally, I had a free afternoon today, so I figured I'd take a stab at making a similar sounding patch. Long story short, it was NOT...
  18. atomicriffmaster

    Firmware 11.0 Clip xpenno's plexi preset in a mix

    Thanks guys! I really feel (quite literally) that there is definitely a difference with this new firmware but then again, I could just of course, be crazy. Either way I cannot recommend updating enough.
  19. atomicriffmaster

    Firmware 11.0 Clip xpenno's plexi preset in a mix

    Thanks! Yeah , definitely look up xpenno's original post and check out that patch, it's awesome.
  20. atomicriffmaster

    Song from my band's upcoming EP

    The mix is pretty red bookish, and I don't mean that in a bad way I guess, it's just louder than I expected it would be. Did you personally master this?
  21. atomicriffmaster

    Firmware 11.0 Clip xpenno's plexi preset in a mix

    Xpenno, I usually never use other people's presets (not sure why, there are so many great ones on here) but I heard yours and was speechless, so I updated my firmware and loaded up the patch. Sure enough, it was kick ass, so I decided to put it in a mix for funzies (just guitar and drums)...
  22. atomicriffmaster

    8 string metal-prog tune...

    Woah, this is cool stuff! I feel like the mix is pumping a bit much though, but it's actually kind of cool in a way.
  23. atomicriffmaster

    short 5150 tone test!

    Sounds awesome!!
  24. atomicriffmaster

    Mogami Gold XLR Cables (WHAT A DIFFERENCE!)

    I finally decided to go the Balanced route and get some quality cables, I of course went with Mogami. They honestly sound different than any other cable and this time I know I'm not just crazy (well still a little haha). They sound great! I highly recommend them! (Mix is just guitar and drums)...
  25. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    Hey sorry for the super late reply, classes are killing me this quarter haha. I had a super tough time getting my head around the Axe-Fx at first, and getting a metal tone that was pleasing. The best piece of advice I could give that helped me is when setting up patches always start from scratch...
  26. atomicriffmaster

    Dude, that sounded great! Sorry I didn't respond fastest enough haha, it turned out good though.

    Dude, that sounded great! Sorry I didn't respond fastest enough haha, it turned out good though.
  27. atomicriffmaster

    grooving-prog-weird sounding tune!

    Dude, that is so cool! This has movie soundtrack written all over it!
  28. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    Thanks! For the intro, I just automated a low pass filter and for the tape scrubbing effect part I automated some down-sampling and pitch detune D-Fi plugins in Pro Tools.
  29. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    I just looked up your band, cool stuff! You guys ever play at Mojoes or Congress?
  30. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    Wow, seems there's a lot of people from Chicago here, nice! @KyleUMF I'm in drop A and I had Painkillers in my six string before I changed them to Cold Sweats, I would probably recommend the Painkillers, especially for seven strings. Or maybe even Aftermaths, I hear those are like Painkillers...
  31. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    I just added some more to this song and I bounced it as a .wav so I can keep my precious 192kHz for the time being. http://dl.dropbox.com/u/14827226/New%20Song%20Progress%20as%20of%202-9-2011%20MSTR2.wav But here's an mp3 if the other one loads too slowly (in all honesty . . . there's barely...
  32. atomicriffmaster

    7 string A tuning

    Nice! I love A tuning, are you running pro tools?
  33. atomicriffmaster

    I'm from south Chicago, in the Beverly area. But I'm actually up in Minnesota currently going to...

    I'm from south Chicago, in the Beverly area. But I'm actually up in Minnesota currently going to school there. Pretty sweet school actually, I'm going for music production and engineering/mastering http://www.ipr.edu/
  34. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    Thanks! And yeah seriously, his guitars sound absolutely devastating on Wormwood, I'd be interested to see his signal flow when he tracked.
  35. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    Yeah, I was thinking about BKP's Aftermath, but I just don't know if I'm sold on it really. I mean, I have cold sweats in my 6 string and they're okay, a little too trebley sometimes though. Are the Lundgrens sterile sounding at all?? I've heard people say that, but then again I suppose they...
  36. atomicriffmaster

    8 string djent tone for recording double tracks L/R style

    Maybe I can help. Here's what it sounds like (and this is with NO bass gtr). And I know it sounds weird, but it's two STEREO guitar tracks panned hard left and hard right, it makes the cab sims sound better. You'll see what I mean if you download the patch...
  37. atomicriffmaster

    Tight metal rhythm patch I made last night

    Oh and here's the patch, that is, if anyone cares for it. http://dl.dropbox.com/u/14827226/Punch%20It%21%207Rhythm.syx
  38. atomicriffmaster

    Tight metal rhythm patch I made last night

    Came up with a much cooler one just recently! http://forum.fractalaudio.com/threads/32939-Acacia-Strain-Djenty-guitar-tone-song-in-the-works!
  39. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    That's not sarcasm is it? Sorry, I'm a noobtron with smileys. Thanks . . . I hope hahah.
  40. atomicriffmaster

    After the Burial-ish or even Periphery tone wanted!

    Like this kind of tone? http://forum.fractalaudio.com/threads/32939-Acacia-Strain-Djenty-guitar-tone-song-in-the-works!
  41. atomicriffmaster

    Acacia Strain/Djenty guitar tone, song in the works!

    http://dl.dropbox.com/u/14827226/New%20Song%20Progress%20as%20of%202-7-2011%20MSTR2.mp3 I hate the fact that I have EMG707tws in my guitar, but it ended up providing some interesting tonage for this new song I'm working on. What do you guys think of it? Oh, and there is unfortunately no bass...
  42. atomicriffmaster

    Tight metal rhythm patch I made last night

    Here's what it sounds like . . . http://soundclick.com/share.cfm?id=9860936 It was recorded into Pro Tools via S/PDIF and only has processing from being run through a master track, the actual guitar tracks have no post processing. It's just guitar and drums. Here's the patch . . ...
  43. atomicriffmaster

    Just Joined! Made a little test clip of a patch I made.

    Based around the Diezel amp sim and a few different cabs and mics, just guitar and drums, recorded s/pdif into Pro Tools. http://soundclick.com/share.cfm?id=9860936 http://dl.dropbox.com/u/14827226/Zegel% ... ial%21.syx
Back
Top Bottom