Search results for query: *

  1. Morphosis

    Axe-Fx III Firmware Release Version 15.01

    FW 15.01: Adjusting the BASS and MID controls in the amp block (e.g. Brit 800, but also on many other amp models) causes crackling and plop noises. (Adjusting directly on the device, no Axe-Edit connected...) Is this a bug or due to the design?
  2. Morphosis

    FM3 not connecting to iMac anymore (USB)

    On device: Home -> Setup -> Utilities -> reset Page ... from there ... Is the device listed by the device manager? did core Audio list FM3, when connected?
  3. Morphosis

    Fixed FC Controller Pedal did not work under MIDI/Remote configuration

    FM3 FW 1.06 FC6 FW 1.11 FC Controller Pedal did not work under MIDI/Remote configuration. Example: MID/Remote -> Other: Output1Volume = FC1 Pedal 1 - DID NOT WORK MID/Remote -> Other: Output1Volume = Pedal 1 (Exp/Sw Tip) - DID WORK Pedal is calibrated for the FC Pedal connection. FC 1 Pedal...
  4. Morphosis

    Fixed Bypass switch in FM3 Edit for Delay1 and Delay2 did not work correctly (no function)

    Yep, 1.06. But this, as said, an Editor issue on version 1.01.10 Can anybody confirm?
  5. Morphosis

    Fixed Bypass switch in FM3 Edit for Delay1 and Delay2 did not work correctly (no function)

    Bypass switch in FM3 Edit for Delay1 and Delay2 did not work correctly (no function). For other blocks it works. Latest FW on FM3 and Edit. No Modifier attached. Double Clock on Block in the Matrix still works, just the button in Edit (In the Block Edit...) did not.
  6. Morphosis

    Not a Bug FW 1.05 scene revert ON no function, reacts like Scene revert OFF

    MIDI / FM3/FC6/12 footswitches translate scene revert settings. FM3 edit & ABCDE encoders for scene / view / layout select not (makes sense for programming a preset).
  7. Morphosis

    Not a Bug FW 1.05 scene revert ON no function, reacts like Scene revert OFF

    Thanks Yek! You`re right. Works fine and make sense, when programming ... my fault .. ;(
  8. Morphosis

    Not a Bug FW 1.05 scene revert ON no function, reacts like Scene revert OFF

    double checked it: system Reset, brand new test preset: happens on the device itself with switches or Encoder A (change scenes), same with FM3 Edit (latest version). Scene revert ON did not work as designed (=scene revert Off). No FC added...
  9. Morphosis

    Not a Bug FW 1.05 scene revert ON no function, reacts like Scene revert OFF

    As title says: FW 1.05 scene revert ON no function, reacts like Scene revert OFF
  10. Morphosis

    Axe-Edit III 1.06.02

    @Michael Pickens Bug with the MIDI Block: When editing parameters per scene, switching the scene in Axe-Edit did not reflect changes in the MIDI Block. With 1.06.01 it does. You always have to click another Block and than back to the MIDI Block, to refressh the data window of the selected scene.
  11. Morphosis

    Fixed FM3 FW 1.04 affects ASIO, kills DAWs that use ASIO like Reaper

    On my System, it works fine with FW1.04
  12. Morphosis

    USB A Port Future Expansion

    1. Nice to have, redundant to cable 2. Nice to have, entlarge to FW upload?! 3. Entlarge User Cabs 4. playback/recording/sample library for the looper (make it adult :) )
  13. Morphosis

    SPDIF Drop Out Issues

    Works like a charm with my RME UCX
  14. Morphosis

    AX8 bug? I/O OUT 2 ( FX Send) ECHO: INPUT 1 result in different output levels left&right.

    Me too ... behaviour does not make sense IMO ..
  15. Morphosis

    AX8 bug? I/O OUT 2 ( FX Send) ECHO: INPUT 1 result in different output levels left&right.

    Did not affect anything. I assume, those settings just affecting signals coming from the grid... It can`t be adressed in the I/O config. I tried every single parameter ... I`ve also tried that, did`nt affect the unbalanced left/right situation.
  16. Morphosis

    AX8 bug? I/O OUT 2 ( FX Send) ECHO: INPUT 1 result in different output levels left&right.

    Because the wish & bug area is obviously closed, I post here: Following G66 customer support case: AX8 | FW 10.1 | Reset System Parameters. Then: I/O -> Audio -> OUT 2 ( FX Send) ECHO: INPUT 1 The setting leads to different output levels at OUT2 Left and Right. Is this a bug or "by design" ...
  17. Morphosis

    Axe-Fest Europe?

    I`m sure @oson00 & @funkstation777 as Main organisators will chime in to answer all your questions :) The german Axe-fest has a totally other charackter, than the FractalAudio driven Axe-Fest (like in Boston this weekend). It`s a weekend from users to users ... A stay together, workshops...
  18. Morphosis

    WISH: Scene Levels of OUT1/2/3/4 Blocks available for FC-X

    Scene Levels of the Output1 & 2 are available via Setup -> MIDI/Remote -> Other -> Output 1/2 Volume Increment/Decrement. Via MIDI CC# the Scene Levels on the Output Blocks 1 & 2 are available, but not with the FC-6/12. I wish therefore a functionality like the FC-X Switch type: Utility -> Amp...
  19. Morphosis

    Axe-Fx III Amp Channel Changing on its own

    1) Share Preset 2) Confirm the issue with NO Midi device or Axe Edit connected 3) If it just happen, when the Rocktron is attached, i assume it`s sending unknown commands
  20. Morphosis

    Axe-Fx III Firmware Version 1.13 Beta

    It`s simply a slight Pitch Detune. Use Pitch Block Detune (few Cents...) left and right slightly and pan to your liking.
  21. Morphosis

    TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

    Not possible due to MFC Firmware limitations.
  22. Morphosis

    TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

    Not possible, the firmware of the MFC had to be rewritten Thanks
  23. Morphosis

    Using FX8 as a basic MIDI controller for III

    Every FX8 Scene can (but must´nt) send an PC# and an CC# (with ON/OFF value). This let you remote 128 Program Changes and all 8 Scenes. Furthermore you can assign up to 2 MIDI Footswitch Blocks per FX8 Preset, you can f.ex. assign as IA Switches. Theoretically 2 MIDI footswitch Blocks * X/Y = 4...
  24. Morphosis

    Continuous airy hiss on headphones

    Record the Headphones output and let us hear
  25. Morphosis

    Cab IR - 48 or 96kHz

    Depends on your settings: Axe-Edit: Browser -> IR Processing Mode / IR Output Format ...
  26. Morphosis

    Implemented Assign Vol Incr and Vol Decr to external switch

    +1 ... Searching for the MIDI/Remote CC# entries for OUT1/2 Vol. Increase and OUT 1/2 Vol. Decrease was my first thought when installing FW1.12. Unfortunately nothing was found. Hopefully such a control function may not only reserved for the FASLINK II protocol ;)
  27. Morphosis

    Having problems with FW1.12

    Edited last post
  28. Morphosis

    Having problems with FW1.12

    Me too, because now, Axe flips back to Preset 000 (001 Disply Ofset) ... there is definitive something not working as intended. @FractalAudio should take a second look into this. i get weird results, using remapping feature, either on PC ON and PC OFF. i send PC# different than 000 or 001, but...
  29. Morphosis

    Having problems with FW1.12

    My fault, you`re right: Checked it: PC#18 -> 18 / SC2 PC#19 -> 18/ SC3 If using remapping for such a case = ON, you have to set "Ignore redundant PC#" to OFF. Than it works
  30. Morphosis

    Having problems with FW1.12

    I`ve made it for the MFC-101 as generic MIDI controller and because the RJM (and any other) is also used as generic MIDI controller, you should be able to transmit the content and the thoughts behind to other controllers as well ...
  31. Morphosis

    Having problems with FW1.12

    I would`nt do assumptions regarding feature sets of future products. The MFC-101 has the double press feature (globally and/or per preset)... Don`t have the RJM, but if the RJM can handle Presets with PC#=OFF (no PC# is send) and also can send CC# per Preset, than you should be able doing all...
  32. Morphosis

    Wish Independence for the AES/SPDIF IN/OUTs

    All physical analog IN/OUTs have dedicated IN/OUT Blocks. Why not the AES/SPDIF digital ones also? They should be handled equally as the analog ones. It seems, we have 16 digital lanes (8in / 8outs). Any chances to increase those lanes to 20 (10in/ 10out) and have two more Blocks: [IN D]igital...
  33. Morphosis

    Having problems with FW1.12

    meh, ... Remapping is cool, if you have a MIDI controller with just PC# to remap PC# to certain Scene. That`s the "workaround" tool. If you have controllers like the MFC, RjM Masterminds and all the others, you can program CC#`s, scene changes and PC# changes should be programmed `clean` within...
  34. Morphosis

    TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

    Can`t verify, have an MKI. The Firmwares got their own files for MKI/II and MKIII. If the data will be identical adressed i can`t say... try it and let us know :)
  35. Morphosis

    *Solved* Help - MFC and III - Axe keep jumping back to startup preset when selecting with MFC

    Yep, you are sending one or more unwanted and unknown PC# from the MFC to the Axe. Check PC# OFF in all 17 IA Switches (pOF). GLOBAL PC# = LAST? Check, if Gobla PC# is set and if, turn it OFF
  36. Morphosis

    TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

    No reconfiguration of the values needed, when changing an IA Switch from a BYPASS SWITCH to an CHANNEL A/B SWITCH, as i wrote... (127 would adress Channel D, but i believe mostly you will use intuitive A and B ...) MFC-101 XP1-4 (Expression Pedal) connections & configurations are the same like...
  37. Morphosis

    TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

    TUTORIAL UPDATE: https://www.cabir.eu/de/content/13-mfc101-for-axefx3 On the last page you will find for download: MFC-101 Original/MKII default configuration.syx and matching Axe-Fx III Systemdata.syx in a ZIP file. You can install both on your devices with Axe-fx Fractal-Bot and you are...
  38. Morphosis

    Wish IN/OUT Block bypass behaviour should support FX LOOP trails

    OK, the manual describes in fact ONLY a seriell FX-Loop: Engage and Bypasse loop with the INPUT Block I`m confused with the Mixer block. For what? Don`t get it... :oops: ok, let`s think loud... If a parallel FX Loop (and trails from ext. FX) is needed, set the OUT/IN blocks in parallel w/o...
  39. Morphosis

    Axe-Fx III with MFC-101 (basic setting)

    I go the "Use MFC Presets as Scenes Switches" route in my MFC-101 for the Axe-Fx III tutorial. That way, i switch Presets also with BANK UP/DOWN, can have up to 8 Scene Switches and on Top additional 17 IA switches, which stay in sync with the Axe III...
  40. Morphosis

    Axe-Fx III with MFC-101 (basic setting)

    Why not just config the TUNER -> CONFIG -> BYPASS = OUTPUT? This mutes the Tuner, no need for a extra "mute Scene". As long you change scenes with MFC IA Switches, you will loose synchronisity for all other MFC IA Switches controlling FX Bypass States or Fx Channels (Switch keeps its LED...
  41. Morphosis

    flickering scrolling bar in SETUP: MIDI/Remote -> PC Mapping tab

    Makes me crazy ... and seems to be the only flickering scrolling bar from all tabs in Axe III
  42. Morphosis

    Possible to limit # of scenes accessible per patch?

    Limit remote Scene Access is to be adressed on the remote control unit. Need just a Toogle between two scenes? Set Switch to TOGGLE CC# = Scene Select OFF value: 0 (selects scene 1) ON value: 1 (selects scene 2)
  43. Morphosis

    MFC-101 as a general midi controller with Axe-Fx II or Axe-Fx III

    I`ve written a in-depth Master Tutorial for MFC-101 programming for the Axe.Fx III. 12 sites PDF you`ll find here: https://www.cabir.eu/de/content/13-mfc101-for-axefx3 Way too much work, but maybe some of you guys get a better understanding of the MFC-101 and MIDI :) Showcase: Don`t forget...
  44. Morphosis

    Axe-Fx III with MFC-101 (basic setting)

    I`ve written a in-depth Master Tutorial for MFC-101 programming for the Axe.Fx III. 12 sites PDF you`ll find here: https://www.cabir.eu/de/content/13-mfc101-for-axefx3 Way too much work, but maybe some of you guys get a better understanding of the MFC-101 and MIDI :) Showcase: Don`t forget...
  45. Morphosis

    TUTORIAL: In depth MFC-101 programming guide for the Axe-Fx III

    Don`t forget to turn the english subtitles on in the youtube video :) In this tutorial you will find step-by-step instructions in 5 steps on how to configure the MFC-101 so that you can control the following functions of the Axe-Fx III and always keep track of current switching states. You`ll...
  46. Morphosis

    Axe-Fx III with MFC-101 (basic setting)

    I`m actually writing a (english) Step by Step Tutorial ... - Preset Changes - Scene Changes - FX Bypass Switching - FX Channel Switching (no, there is no delay between pressing buttons and execution on the Axe, the two Handys i used for video just get out of Video sync...) ...all with MFC...
  47. Morphosis

    Singing through the Axe-Fx III using a dynamic mic... Problems?

    Hardware thing: you definitve need an external Mic Preamp, the Axe did not have built in.
  48. Morphosis

    Wish IN/OUT Block bypass behaviour should support FX LOOP trails

    Thanks Cliff! IF this will work, just placing IN and OUT in just a seriell routing, than maybe something is wrong described in the User manual:
  49. Morphosis

    Wish IN/OUT Block bypass behaviour should support FX LOOP trails

    Yes, but it would interrupt the signal path also at the Blocks grid out. So, the block would have to be set in parallel, also the IN Block, because it discards the grids input (from the manual), if it`s ON (=physical Input ON). OK, that`s the workaround. But, hmm ... not the sexiest solution ...
  50. Morphosis

    No consistent behaviour Push Value = Layout Menu

    But why should`nt i can return to the previous page by pressing EXIT? Would make it more flexible and would suppport the logical user interface structure, IMO. EXIT = leave the page and return to from where i entered the actual menu. Should work gobally with this behaviour, no?! The PUSH Value...
  51. Morphosis

    Wish IN/OUT Block bypass behaviour should support FX LOOP trails

    OUT Blocks bypass state are fixed to: Physical OUT = MUTE Block Grid Out = MUTE IN Blocks bypass state are fixed to: Physical IN = MUTE Block Grid IN = THRU This behaviour does NOT support time based Effects in the FX Loop to let their Delay or Reverb trails "ringing out", when bypassing the...
  52. Morphosis

    No consistent behaviour Push Value = Layout Menu

    Inconsistent User guidance behaviour: Axe-Fx III FW1.10: push value = layout, no leaving via Exit possible If you Enter the layout menu from HOME via a) Push C Encoder [LAYOUT], you can exit and return to Home via EXIT button b) Push ENTER button, you can exit and return to Home via EXIT...
  53. Morphosis

    BUG: Ignore Redundant PC = ON does not work

    Ignore PC Redundant = ON did NOT ignore redundant PC Change Commands: Example in the Video: Preset 001 saved with default SCENE3. When i send now PC 001 & SCENE Command value for Scene 1, the Axe III seems to reload the same Preset (instead of ignoring the command) and secondly change the...
  54. Morphosis

    GLOBAL OUTPUT SWITCH?!

    Can anybody tell me, what this is? What it makes? Footswitch -> Global -> Output [Post]. you can select this entry in FX-Edit, but never get rid of it, if selected (NONE is greyed out) I can`t find this paramter to select in the Hardware, is it there anhywhere? What does this switch? Can`t...
  55. Morphosis

    Bug? AX8 FW Q9.04 Bug: Crazy Global settings when hitting Footswitches 1-8

    No, I can call up the faulty entries repeatedly, even after restarting the unit
  56. Morphosis

    Bug? AX8 FW Q9.04 Bug: Crazy Global settings when hitting Footswitches 1-8

    Reverb Mix = OD808, ähh no ... Analog mono :D Spillover = 4000 Hz :eek: Funny, but buggy ...at least, this should`nt happen ... Is it just me, or can someone else confirm?
  57. Morphosis

    cabIR.eu Happy Easter Sale 30%

    I wish you and your families a Happy Easter! Markus from www.cabIR.eu :)
  58. Morphosis

    Older ir's do they need to be updated?

    Well, ... https://www.cabir.eu/en/18-marshall
  59. Morphosis

    Axe-Fx III Wish List

    The concept of out Blocks has already realized your wish
  60. Morphosis

    5153 RED - Chugga Chugga with a cheapo LP?

    Actually, I wanted to try something.... but somehow I had fallen in love with the Chugga Chugga Chugga.... 5153 RED - stock settings Epi LP Classic 57+ HB Drop D What would you change / tweak ???
  61. Morphosis

    Will we see improvements/new tech regarding speaker cabinets?

    As long as you are loved ... yes.
  62. Morphosis

    Will we see improvements/new tech regarding speaker cabinets?

    I`ve done tests years ago with different signals ...
  63. Morphosis

    Will we see improvements/new tech regarding speaker cabinets?

    accurateness on the low end will be better.
  64. Morphosis

    Will we see improvements/new tech regarding speaker cabinets?

    In my measurements I achieved the same results as Cliff. As long as the speaker is driven within its specifications, the result remains virtually identical visually, differences from IRs that are not audible except for the loudness with which they have been captured. Comparing recordings of...
  65. Morphosis

    Axe-Fx III Wish List

    Freely Copy S/PDIF | AES/EBU in outs to analog IN-4 OUT 1-4
  66. Morphosis

    Bug? MFC freeze in SET Mode, when global WRAP=OFF

    ... and you stepped thru the last Song in the Set ... confirmed on MFC-101 MKI and MKIII
  67. Morphosis

    Very early in the morning last week. Waiting for the shuttle to the airport.

    From powering on to end of booting - a sip of coffee ;) Great first impressions of the new GUI navigation! Looks great! Also the direct switches to TUNER, LAYOUT, CONTROLLERS are back thru encoder push knobs from the "RECALL MENU". Promising ...
  68. Morphosis

    Presenting... The Axe-Fx III

    In my understanding: YES: The dedicated four IN & OUT Blocks, freely routable in the grid make the FX Loop Block obsolete. Much more felxibility, in comparison to the fixed IN / OUT Blocks of the Axe II. Great evolution of the concept :)
  69. Morphosis

    Favorite New Feature?

    4 Channels Free dedicated IN / OUT Blocks SCENE Names doubled processor power Matrix 6X14 zoomed out overview colored block labels for faster identification in the grid
  70. Morphosis

    Presenting... The Axe-Fx III

    It takes a load off my mind. Perfect!
  71. Morphosis

    Presenting... The Axe-Fx III

    Are my prayers heard that the 5 encoders are rasterized below the display, as with the FX8, to enable targeted parameter value? The encoders on the AX8 are not rasterized (which is completely incomprehensible to me), which means that targeted control of a parameter value is often "pain in the...
  72. Morphosis

    Presenting... The Axe-Fx III

    Cliff, the old MFC protocoll was MIDI based: Switching on/off a Axe-Fx IA send`s actually the correspondent CC#. By setting up block bypasses in the CTRL MIDI Menu to the same CC#, a let`s say DRIVE1 bypass MFC Axe-Fx IA could also result in a on/off switch off a filter block behind the Amp (to...
  73. Morphosis

    SPDIF or AES as external FX Loop?

    PLEASE! It would be glorious, if the digital IN/OUTs could be freely assignable to (at least) one of the IN / OUT Blocks!
  74. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    ??? It`s said, that the front input cancels the rear input refering the two instrument inputs?!?!?!?!
  75. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    Please NOT, we all remember the nightmare unstable offline Axe-Edit from the Standard/Ultra times .... i prefer the Editor as remote control for the hardware as is ...
  76. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    4 cabs simoultanesly - lot`s of processor power ... can a created mix be exported to a new User slot?
  77. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    Only for the Instrument inputs: No, the front cancels the rear
  78. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    Yup, and the fourth path is for the singers effects, when performing purple rain ;)
  79. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    4 Independent Stereo routes, but only 2 amp Blocks, so i would say: maximal 2 guys, as it is possible with the Axe II
  80. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    monitor equalization / correction
  81. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    from the site: "Our celebrated Tone Matching block is also improved, now with the impressive ability to clone the tone of an amp or recording in UltraRes™." Allright, dual FFT in Ultra-Res (instead high-res). Fine. But what means "clone the tone of an amp"? Get we in non-linearity measurement...
  82. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    Again, did i get it right? X/Y is now "channel A,B,C,D"? And gapless & seamless? This is frickin` awesome! The more i read, the more i analyze pictures, also of the GUI, the more i realize, that the Axe III is all new and far more, than i ever expect it could be .... As much a step up, as it was...
  83. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    THIS IS WHAT WE ARE WAITNG FOR YEARS! GREAT :)
  84. Morphosis

    Presenting... The Axe-Fx III

    Awesome! when daisy chained, will the displays be capable to disply different content, or will they show be up to four times redundant informations?
  85. Morphosis

    Presenting... The Axe-Fx III

    Awesome :)
  86. Morphosis

    Presenting... The Axe-Fx III

    Well 6 & 12 against 17 on the MFC101. Will the new FC6 & FC12 be daisy chainable? FC6+FC12 = FC18 or FC12+FC12 = FC24?
  87. Morphosis

    So What's New on the III? ...(Axe-Fx II vs III)

    Are the 5 encoders below the display rasterized as on the FX8? I never understand why the encoders on the AX8 are not, difficult to setup a specific parameter value... What`s stellar are the new IN & OUT Blocks! More flexibility and no more workaround via "delay Out 1 to Out2" in the global I/O...
  88. Morphosis

    FW9.04 factory preset "Still Blue" in the mix

    Sounds great, Tony! Proud, that these MB-LOSTAR_SHADOW IR`s are actually your favourites! Thanks!
  89. Morphosis

    Flying In A Blue Dream

    AxeCellent! :):):)
  90. Morphosis

    [Video] Edge of explosion tone

    The rotary sound is just beautiful! Great! And for the lead ... well ... crazy spitty and i`m really wondering, that you get those feedbacks just from living room volume, wow .... It screams!
  91. Morphosis

    cabIR.eu USA-COMBOS: 5 new IR libraries from the 60ie to date

    Wow! Well, i think i have to try it the MB-LOSTAR libraries with the MKIV for myself, sounds interesting! Thanks for the tip! Always love to hear, when you guys get easly and fast great results out of the stuff! That`s the intention behind ... thanks!
  92. Morphosis

    cabIR.eu CORE 4 TONE starter pack

    Wow! Great EV12L comparison of the CU-THIELE vs. MM-RP112 libraries! Thanks so much @Smittefar, sounds great!
  93. Morphosis

    cabIR.eu CORE 4 TONE starter pack

    Hi Niko, Of the musical styles you mentioned, I would also rather agree with @Smittefar, but if I think "Country", then I would find the FE-TWEED library again very exciting - they sound very lively and "tweedish", at Knopfler i tend to the the Vibrolux libraries, whereas the 65` Vibrolux...
  94. Morphosis

    cabIR.eu CORE 4 TONE starter pack

    :) Well, sometimes i`m wondering, people spent their hard earned money and don`t even try, what they bought, ... on the other hand .. there`s still a cheap Behringer analog amp sim box, i shoted cheaply just for fun and out of curiosity and also even treid it till to date ... *grmpf ...
  95. Morphosis

    cabIR.eu USA-COMBOS: 5 new IR libraries from the 60ie to date

    Well, i´m very happy with the results, but i´m totally biased for sure ... but Hubi seems also got some new love for the Fenders, as he wrote here: https://forum.fractalaudio.com/threads/cabir-eu-usa-combos-5-new-ir-libraries-from-the-60ie-to-date.133832/#post-1582503 So, ... hopefully you too...
  96. Morphosis

    cabIR.eu USA-COMBOS: 5 new IR libraries from the 60ie to date

    :) Very glad, you like it and get easily some nice sounds out of them! Thanks for the kind words and your support! Thank you too, and hopefully, you also like them, as many others do, from what i heard so far from different places :) And just to the record: Tomorrow ends the 50% OFF...
Back
Top Bottom