Search results for query: *

  • Users: AXBX
  • Content: Threads
  • Order by date
  1. A

    Level Drop in ULTRA

    Dear Forum, The input level drops significantly during the ringing out of the guitar at a certain point. I first thought, it could be a gate, but the sound is still there, just with a lower level.... It sounds like a leap of around 3dB I would say not being continuously.. How to fix?? You can...
  2. A

    Passive / Active Acoustic Mic into AXE III

    How to set up a mic´ed acoustic guitar with the AXE III, no mixer involved. I prefer condensers, but would take the dynamic route either, in case. Plus, I sing into a second mic. The whole thing should be recorded digitally with the USB interface options
  3. A

    Signal Characteristics

    Dear Forum, I heard you can´t use the XLR from a DI Box into the AXES INs ?? THX BX
  4. A

    Vai 2023 Setup

    Dear Forum, These insights for a hybrid live rig are cool : Now How is the signal chain run in detail? Is it 4CM or Instrument input at the AXE III? Main aspect is how to achieve a 0 Latency Setup with the synergys. Is that possible at all here? I guess you need a 100% Wet Signal if using...
  5. A

    3 mono Signals on OUTs: 1Dry, 2no Cab, 3Full preset Sound

    Dear Forum, my intention is to print those 3 mono streams into a DAW. How to setup on the ULTRA? THX
  6. A

    0 latency monitoring an additional external line signal

    If you run a additional line signal (mic preamp) into the AXEIII: Can you monitor and record this particular additional input with 0 latency AND record guitar tracks with the dry DI path? This way you could do a vocal plus guitar tracks recording. I see this as the only chance to do this at the...
  7. A

    USB Audio Center

    Ein Mikrocontroller mit 16 Kernen und 500 MHz bietet 16 Kanäle mit makellosem USB-Audio (8 Eingänge, 8 Ausgänge), so dass das Axe-Fx III zum Mittelpunkt deines Musik-Arbeitsplatzes wird. Die audiophilen Signalpfad-Komponenten und -Konverter bieten eine bessere Audio-Performance als die meisten...
  8. A

    AXE ULTRA - FOH / FRFR EQ-Setup

    Dear Commnity, I would like to EQ one of the Outputs with a PEQ. At the moment OUT1 is able to be EQed with the Routing shown in the attachment. How to let the PEQ after FXL Block affect OUT 2 instead of OUT 1. OUT1 should be let untouched for the FOH connections THX Best BX
  9. A

    OUT2 - PEQ

    Dear Community, for a show setup I would like to EQ my monitor cab on OUT2 (OUT1 runs to the FOH). Can I implement a dedicated PEQ to OUT2 only, leaving OUT1 untouched? THX Best BX
  10. A

    Distortion with parameter pedal

    Dear Community, which block works good for adding distortion with a expression pedal. The key is not to add volume, only distortion keeping the same volume level THX BX
  11. A

    Re-Amping with AXE Ultra

    Dear Axers, Regarding a proper workflow for Re-Amping with the AXE Ultra, I think of a setup like this: a) Recording: RME Fireface(Instruments in) > AXE Ultra (Line IN?) b) Re Amping: same way? Thx
  12. A

    Pre-amping

    Dear Community, What Blocks would you use for a kind of analog preamp feel inside the AXE Ultra. I tested a bit with the Exotic BB Pre-Amp. I play a ´69 strat (no HBs). She can get a bit more of sweet driveness in advance. THX Cheers Tim
  13. A

    Re-Amping with AXE Ultra

    Dear Community, I would like to use the AXE Ultra for Monitoring while striping the direct guitar signal into the DAW for later sound design. As far as I know, it is important to have an eye on the right instrument impedance (guitar out signal) vs a line signal (happens after a DI Box). What...
  14. A

    Re-amping and Hi Z

    Guys, what is important here to know about feeding back the dry Signal from the DAW. When does the Axe ULTRA need a Hi Z and when is it possible to use the Line Signal. Is there some issues feeding back the Line Signal from the DAW in that respect. I am not sure if Input one is Hi Z...
  15. A

    Mikable valve driven Cabs

    Mikable valve driven FRFR Cabs What about a 2 way valve driven monitor, that can be mic´d. Are there any out there? I am looking for a solution where I can play my E guits and acoustics through one amp. The Clue: The main box must have a frequency response due to a guitar cab (close miking...
  16. A

    Atomic FRFR frequency charts

    Hey Guys, Not sure, but can´t find them in the manual. How does the frequency chart of the main speakers look like and where sits the crossover freq for the tweeter? I´d love to offer miking the cabs as an additional option, IF the main box at least behaves (without the tweeter) as regular...
  17. A

    Low Cut

    Hey Guys, is the 1st Band shelving in the OUT1/2 sections in the AXE ULTRA a low cut or a bell? THX Best Tim
  18. A

    Matching DI and Atomic Sound with Master Parametric EQ in Out2?

    Dear Tweakers, how to in the best way solve the different sound of DI and Atomic FRFRs using one patch? In my setup it is necessary to approximate or in best case match the studio designed patches for physical OUT1 and OUT2. I would think of micing the Atomic FRFRs to offer my Sound to the...
  19. A

    Independent Valve Amp Monitoring and FOH Signal

    Dear Community, Can I use the Axe FX in output 1 for PA (with cab emulation) and the other output 2 for Instrument In into a Valve Amp using raw distortion effects (without cab emulation) etc? I am looking for a good live setup here using a regular analogue valve amp for my monitoring...
  20. A

    Micing atomic reactors with Tweeter

    Dear Community, how would you mic the active atomic reactors regarding the tweeter. Does the box have a normal guitar amp characteristic without using the tweeter? I like to use it a bit on heavy sounds and acoustical for sure. Thanks for your help Best regards Tim
  21. A

    Amp Control with footswitch jack

    Dear Community There are lots of Analogue amps out there without MIDI, but having a footswitch jack for channel switching. Is it possible to handle that with the MFC 101? As far as I read the manual it at least has two switch jacks. I would love having the opportunity using the raw analogue...
  22. A

    EQing the Atomic Reactor FRs

    Dear Axe Community, when tweaking the Output sound of the Axe in the EQ Section (effect chain or Output Section). Would you see a difference in tweaking the sound inside the Axe running for dialing in the Atomics characteristics compared to eq-ing the sound inside a regular analog tube amp...
  23. A

    Acoustic Guitars

    Dear Axer´s, soundwise I would not think that acoutic guitars work with those cabinets for my ears. What am I doing wrong? I feel that after a while the sound with the g66 Atomic Cabs becomes harsher with my steel string running through the axes out on atomic´s wedges, changing the sonic...
  24. A

    Acoustic Intentions - Axe Ultra with atomic active monitors

    Hi, when using the axe with my acoustic guits I have the feel that amp simulation is being used somewhere. You hear that typical twang which makes the sound a bit sounding like playing into a can. When I run the Ac guitar through an Mbox into standard studio speakers the sound is proper. As far...
  25. A

    Tweaking the Tubes out of it!

    Dear Axe Users, Which Settings would you choose to dial a bit in terms of getting more tube and saturation effect in distorted patches? Where do you think is it possible to get most out of the AXE ULTRA here. Maybe its some basic settings, but I feel that I have a bit of the digital world...
  26. A

    Atomic amps versus DI Sound

    Hi Guys, I have programmed a lot on my studio speakers, when it came to live playing through the powered atomic Wedges, the sound was different lots of basses and the chorus was quite a bit out of phase kind of sound. What would you suggest to get them sound as equal as possible to the DI...
  27. A

    Fender Strat Input Level Axe FX Ultra

    Hi Folks, Today I dived into setting up the Axe FX ULTRA. When I plugged in my Strat I had to bring up the input volume knob to the highest possible setting to get a bit of the red Led. Does anyone have experience with those strat levels. Input stage seems a bit low... Thanks very much...
  28. A

    Axe Fx Global Stomp Box Assign

    Dear Colleagues, is it possible to assign a controller globally to a specific parameter. For Example: I want to change the drive on/off with with my FCB1010 in stomp box mode, so do I have to assign the controller within every single Preset which contains the drive parameter? Best regrads TIm
  29. A

    S/PDIF out - low level for recording ULTRA-DIGI002-Logic Pro

    Dear Axe Users, for a while I was experimenting tonight on recording the Axe FX Ultra digitally via a DIGI002 into Logic Pro. The incoming recording level in Logic seems pretty low. So - 1) I tried increasing the digital output level via the Axe´s output 1/2 knobs. This does not work, the...
Back
Top Bottom