Search results for query: *

  1. reilly

    What cable for 4CM?

    www.Pedalsnake.com
  2. reilly

    X’s Journey w/ a PRS MT 15 & the FX8....

    Cool videos, I love my FX8!! It has worked with every amp I have tried/owned. I also Own the Runt 50 head and matching cab and a BE 412. I have been able to do channel switching with the Archon 100 as well with no other gear other than a Pedal Snake cable. FX8 works perfectly and will also...
  3. reilly

    Post-whatever players, what's your FX8 setup?

    This is my normal giging rig, simple but allows for a lot of tones and effects. I use a lot of delays and pitch as well as a Over Drive in front to get the gain and response i am looking for. The pc editor makes it easy to create cool sounds. Www.imbuedmusic.com
  4. reilly

    Mesa Mark IV channel switching

    Look at www.pedalsnake.com
  5. reilly

    Mesa Mark IV channel switching

    Yes one cable with a splitter on the end will do the trick (stereo to dual mono) that’s how I ran mine
  6. reilly

    Mesa Mark IV channel switching

    I ran a trs to a split Ts from the fx8 using only one control switch output, you could also use both of the control switch outputs using just a ts cable from each. you can switch between all 3 channels on the amp. I was not using my amps reverb or any simulclass switching just kept it simple...
  7. reilly

    Bandmates complaining about tone....

    I had some great tones with very little effert when I was using the Mesa Mark Iv and fx8, I used the amps Distortion with a od in front (if needed) and it sounded great. The fx8 is a great unit and the mark Iv is awesome as well, for me though I am not a fan of how the mark series sounded on the...
  8. reilly

    What type of FX8 rig are you running?

    I run my FX8 (4 cable method) into a Friedman Runt 50 and matching Friedman 2x12 cab
  9. reilly

    [Solved] FX loop issue on the JP-2C with FX8

    Don’t plug in the footswitch with the midi at the same time (says so in the manual) check your midi cc to make sure the loop is staying on
  10. reilly

    FX8 relay channel switching the 5150 IIIs with the Bestronics cable

    Pm me with an email and I will get you a few patches
  11. reilly

    FX8 relay channel switching the 5150 IIIs with the Bestronics cable

    I just checked Red channel Relay 1 set to tip R1 mode is lat Relay 2 is off Green channel Relay 1 is tip Relay 2 is both Blue channel I think its ring or sleave for relay 1
  12. reilly

    FX8 relay channel switching the 5150 IIIs with the Bestronics cable

    I don't have my EVH anymore but make sure you are using two relay blocks, I think I still have some presets on my fx8 I could email them to you. You just need to find the right combo of ring, tip sleeve between the relays
  13. reilly

    5150 100 watt gizmo question

    You don't need the amp gizmo for the evh 50w since it has midi built into the amp (I had a 50w evh for a short time and was able to get it to work with midi and the fx8) Back to the 100w can you use the stock footswitch cable? (7 pin midi) or do you need to buy the special rjm evh cable that...
  14. reilly

    5150 100 watt gizmo question

    I was about to go the mini amp gizmo route until I found out about the custom cable.
  15. reilly

    5150 100 watt gizmo question

    Yes, you use the relay ports, effects loop will always be "on" but that does not bother me, a 25 foot cable cost me $75 shipped, still much cheaper than a mini amp gizmo plus cable. I just made a bank for my Evh 5150 iii 100w and separate bank for my Mesa JP-2C, aside from the relay settings I...
  16. reilly

    5150 100 watt gizmo question

    I just got this cable and it works great with my fx8 with no need for a mini amp gizmo https://btpa.com/AS-EVH10001-XX.html
  17. reilly

    Show Us Your FX8 Rig!

    Always changing things up but I have landed on the JP-2c and the EVH 5150iii
  18. reilly

    FX8 with a Mesa Dual Rec

    I did use the 4 cable method plus channel switching and everything worked perfectly
  19. reilly

    FX8 with a Mesa Dual Rec

    I had the duel rectifier reborn and it worked fine with the fx8 mark I. No problems at all that I remember everything worked and sounded great. I have since gone back to a Mesa Mark Iv and added a Mesa JP2C (I am a Mark guy) both work great with the fx8 Mark I & Mark II
  20. reilly

    FX-8 / Mesa Mark IV Switching Questions

    I don't use any other devices, I am using a pedal snake cable 4M24 (http://www.pedalsnake.com/osCommerce/catalog/index.php?cPath=22) with the Dual TRS ends RS2 (http://www.pedalsnake.com/osCommerce/catalog/index.php?cPath=21_23) than I choose Ring, Tip or sleeve option in the FX8 editor to get...
  21. reilly

    FX-8 / Mesa Mark IV Switching Questions

    The FX8 Is an amazing unit and has really helped simplify my rig without compromise. The Mark IV R2 is very underrated, at bedroom volumes it is not the best but when you turn it up that is where it starts to shine, place an OD in front and its fantastic! The 4 available relays work with no...
  22. reilly

    FX-8 / Mesa Mark IV Switching Questions

    I run my FX8 with my mark IV, I can control all of the channel switching just fine, I don't use the spring reverb on the amp and the GEQ is always on. Having the ability to control all of the switching is fine but I really think it is overkill. The FX8 sounds great and my setup has never been...
  23. reilly

    Anyone get their invite to buy FX8?

    Got on the the list 6/9 for the Mark II just got my invite, Ordered should have it in a few days
  24. reilly

    Reproducing Petrucci's Wah

    Nice!!! I will try this tomorrow, can't wait
  25. reilly

    Show Us Your FX8 Rig!

    I just grabbed a piece of wood from home depot, cut it to size and painted it black. I used L brackets to attach the FX8 and EV1's. I removed the feet from the EV1's and mounted them to the bottom of the board. Fits perfect in the Monobag i ordered for it.. I wanted 2 EV1's so I could have wah...
  26. reilly

    Show Us Your FX8 Rig!

    My FX8 board stays he same, but I use it with a few different amp rigs!
  27. reilly

    Looper

    I am running a Mesa Mark Five 25 head and the FX8 4 cable method. If I record a loop on the clean channel and switch to the Dirty channel the recorded clip sounds like it is being played on the dirty channel instead of staying clean, what do I need to do so the part stays clean and I can...
  28. reilly

    Can I run just presets?

    I would think this is something most users would want!
  29. reilly

    Can I run just presets?

    Thanks chris
  30. reilly

    Can I run just presets?

    I would like to have the fx8 set up just like the MFC and Axefx where I hit one button and it changes everything, I don't want to use it in stomp box mode and I don't like how you have to bank or hit another button prior to hitting the scene button. is this possible? I would like to use presets...
  31. reilly

    FX8 Preset Master List

    I just noticed this post, I was looking at some of the presets and amps that they were designed on and it made me pretty happy! My FX8 gets delivered Tuesday! Thanks for sharing!
  32. reilly

    invite to buy fx8

    I got on the list July 12th and my name just came up!!! Its on the way and I'm pretty excited!
  33. reilly

    more presets?

    I always love your presets
  34. reilly

    Post Your Rig!

  35. reilly

    Axe-Fx II Firmware 18.08 Released

    I updated with no issues, after a few minutes I was able to get a killer tone with the IIC+, I think it helps to have owned a mark series amp with this one. Thanks Fractal!!!
  36. reilly

    Fan noise: Matrix GT800 vs GT1000FX 1sp?

    I have a GT1000FX 1 space and a 2 space at my studio. The single space is a little louder but it could just be that particular fan (I'm sure I could find a replacement if needed) but it isn't loud enough to really bother me. I think you will find that all the Matrix power amps are pretty quiet
  37. reilly

    Power Amp vs. Powered Monitor/Cab

    Well I have been running FRFR speakers and going direct for all my gigs for the last 1.5 years or so. I have had the QSC K10 & K12 and currently have the two of the EV ZLX-12P monitors. I Liked the EV's a little more the sounded a little more organic and less Hi-fi. Although majority of the gigs...
  38. reilly

    Suggestions for 2 space rack case for my AXE FX II......

    I had one of these redirect Small and light and portable and not to expensive, also the Gator Shallow cases work nice to but you will need a right angle power cord for the AxeFxII
  39. reilly

    Anyone used the new EV zlx-12p for a monitor

    I have two of them that I use with my Axefx II, they are affordable and sound very good. I had a QSC K12 before but it seamed a little too HiFi for guitar, the EV's seamed a little more raw. I have not had any issues with my tone when playing out and I go straight to FOH and rarely bring my...
  40. reilly

    EV-1 Expression Pedal

    I got mine in the mail today! Seems really nice and solid.
  41. reilly

    Post Your Rig!

  42. reilly

    My idea of a Fat stereo Dumble tone

    That Sounds Great!
  43. reilly

    Violin patch (+ Ensemble feature!)

    Amazing!!! Thank you!
  44. reilly

    new jp6 guitar, old axe....not getting them tones i know i can get

    I have no problem getting my JP12 to sound big through my axe, it's a tone monster.
  45. reilly

    Acceptance of axe fx from others

    Ive had more compliments (both sounds guys and musicians) running my axe rig through the FOH then i ever had with my tube amps (i have had some really nice tube rigs over the years) and I don't have to be yelled at to turn down. Stage volume and mixes couldnt be better these days plus I can...
  46. reilly

    Ellie Goulding's Lights Rock Cover (AxeFX II)

    KIller! Great Job!
  47. reilly

    New Album!

    I just released my new album, 90% of the guitars were done with the ULTRA. If you would like to take a listen feel free to visit my bands page. Last Day Left
  48. reilly

    Power Amp and Guitar Cab Or Powered FRFR PA Speaker?

    So I ended up playing 2 shows going direct and had great results as well as multiple compliments on my tone at both venues from people I don't even know, The rocktron became back ordered after i returned the lemon i got. So i had not other option on such short notice but to go direct, the sound...
  49. reilly

    Power Amp and Guitar Cab Or Powered FRFR PA Speaker?

    Well here is my update. I got An Ultra a week ago and dialed in some sounds I'm happy with (went Direct for a practice and sounded rather good), I ordered a Rocktron Velocity 300 power amp and received it yesterday, plugged it in sounded good with my Mesa cabs (one is loaded with an EVM the...
  50. reilly

    Power Amp and Guitar Cab Or Powered FRFR PA Speaker?

    I will say Im leaning towards the Matrix because of all the positive reviews or waiting for the new Fryette power amp , I'm not sure if i can get use to playing without a guitar speaker cab if i went with a powered PA speaker.
  51. reilly

    Power Amp and Guitar Cab Or Powered FRFR PA Speaker?

    Ok so i have been lurking for a long time reading all of the posts regarding the AXE-FX, I am not new to the AXE I tweak my friends settings all the time for their band but I don't own one yet (but I will very shortly). Quick background on me, I currently use a Mesa Boogie Mark IV rack...
Back
Top Bottom