Search results for query: *

  • Users: shep
  • Content: Threads
  • Order by date
  1. S

    Axe-Fx Ultra trouble

    I've had her a loooong time. I turn it on, all is well. Within 5-10 minutes, the sound gets darker, and the energy of the amp (the drive, the heat, all the stuff that makes it sound real) fade away. It's kinda like tubes going bad, but well... If I turn it off for half an hour, it'll revive...
  2. S

    2 Guitars into 2 amps w/ L/R output

    Hi - I need to set my Ultra up to incorporate 2 guitars plugged in ( which inputs do I use?) into 2 amps/cabs 100% L, amp 1 - 100% R, amp2) each being output to a mixer (this part I get)... I saw the video here - Two Guitars, One Axe-Fx (NOT WORK SAFE) - Sevenstring.org which is what I need...
  3. S

    RC-3 hookup

    I picked up an RC-3 Looper and have a few questions about how to hook up and control it the way I hope to. I have an Ultra and a FCB1010. I hope to be able to set it up in the fx loop and have it's output go to a second powered cab, keeping it's signal separate for volume control from output 2...
  4. S

    Synth block minimoog sound

    I need to create a minimoog sound to use for the intro of Ridin The Storm Out by REO. I need to control the glide so it will play the low A at the up pedal position, and the high B at the bottom. Does anyone know if there's a patch made? I'm working w/ a FCB1010, using expression 1 and modifier...
  5. S

    Global Tempo

    Got it - sorry for the wasted post.
  6. S

    Lost midi connection

    Lost midi connection Solved I've had my FCB1010 for months. I switch back and forth still between AxeEdit, Ripworx, and controlling my Ultra directly from the board. Today I synced my patches, and reconnected to control AF from the board directly. No connectivity. Checked midi channel on Ultra...
  7. S

    PC Reset problems

    I am having a very hard time getting my levels ( and controlling their adjustments via controller) set from preset to preset. Using a FCB1010. I use the 1st expression to control verb and delay (Exp 1 using modifier external 1 controller 16), 2nd expression to control gain and level on amp (Exp...
  8. S

    Intelligent Harmony

    I've successfully used a DHP33, so I have some experience creating harmonies - both above and below the input note. There were options for setting notes above/below the played note. I'm trying to do something very simple, but have yet to figure out how. In the key of E, I simply need to play the...
  9. S

    Epi LP7 and 5150 FW11

    I replaced my Epi LP7 pickups with a DiMarzio Crunch Lab/Liquifire combo. Wrote a little lick and recorded it w/ the 5150 and Rect 1 cab, adding just a touch of Roland Dimension D post, 'cause I like it. I'm pretty happy w/ it, but would like feedback, especially on fizz, eq, etc. Thanks, Shep...
  10. S

    Volume and Delay levels FCB1010

    I'm getting along a bit better w/ my patch creations, but there's something I can't get to work right. I set up 5 different patches, each at a base level that worked well toggling between ryth/lead lpatches, whether clean or dirty. I set up a FCB1010 expression pedal to control the level (not...
  11. S

    Using FCB1010 Tap Tempo

    I FINALLY got my FCB1010 working. Stomp mode works. I can set up expression. In Global settings, I checked 'Block repetitive PC Messages' in Axe I/O. I select a preset that I have Program 08 (I like the bottom row for stomp) set for the PC redundant presses to control tap tempo from cc14. ( I...
  12. S

    FCB 1010 Uno upgrade

    I got a FCB 1010 today, and removed the eprom to install the Uno upgrade. I oriented the eprom as per the manual, and closed up the unit. Upon firing it up, it doesn't show the -1 led, it shows either a middle character '8.' or a 3rd character '8' with no dot after it.Nothing will change on the...
  13. S

    Tap tempo

    Tap tempo -1/2 solved I have the stereo delay in a patch. I have the tempo set to quarter. In modifier, I use Ext7, it's set to Pedal 1 in I/O CTRL, pedal 1 set to momentary setting. I get nothing but really long delay times, even w/ the tempo at 16th notes. Also the time on the edit page never...
  14. S

    Need tap tempo assistance on GC 2.3

    After a half hour of searching/reading reading how well the MFC-101 does this w/o setup, I decided to ask the gurus here that have a original Ground Control. I've been unable to find a way to tap in tempos - finding a controllable parameter so I can use an IA to do this. Any help is...
  15. S

    Midi Output of my Ultra

    This is odd... I can plug the midi out/in of the Ultra into my RME 9632 in/out and it syncs up to use Axe edit. I need to merge 3 outs (Roland TD-3, TD-4, and Axe-fx) into the RME in. I have a Quadra merge. I get the midi light on it to light up (powers up from input 1) from the TD-3 and 4, but...
  16. S

    Multi Amp/Track recording

    I used 2 tracks of guitar to 'reamp' a FAS Modern/Soldano/5150 blend on this clip. Finally feel like I'm getting to the 'big' guitar sound I've been after. How's it sound in your room? Happy Holidays and thanks - Shep http://dl.dropbox.com/u/1870114/Bleed%2 ... 120510.mp3
  17. S

    Recording Guitars Questions

    I'm trying to learn more about recording possibilities using my Ultra. So far I've only recorded through the amps/fx. This is kinda frustrating, as I've not gotten the tone I'm looking for, and have to replay a good take evey time. I assume that w/ the Axe input, I have no need for a reamp box...
  18. S

    Marsha HBE Rock Lead tone

    I pulled up a mix I used in a 'music minus one' live scenario and played the solo against it. Did quite a bit of tweaking for my Charvel Model 6 (this was tough to get all the crap out I didn't like), then tried to remember the solo. Not perfectly played, but I like what came out of it. The...
  19. S

    Headphone tone

    I set my AxeFx up in my studio monitors. I get it sounding as I wish. If my wife wants to watch TV or sleep, i put my cans on. The sound in cans is markedly different, never in a good way. One user said 'I get freaking amazing sounds with my headphones on'. I have 2 sets of AKG's - 141 and 271...
  20. S

    Trying to emulate this

    guitar sound. I've been 'round the bush w/ a number of amps, closest being the New Recto. But I have yet to get near this size (huge! IMO), attack, or tone. I have quite a few Redwire IR's (Basketweave, Marshall, Mesa, Orange, Tweed, Uberkab, Vox) as well trying the internals. Here's the clip -...
  21. S

    Next Version?

    I bought my Ultra in June. I have been very happy with it. Back when I was lurking, it seemed eveyone spoke of how great it was that this unit was updated so often. Other than the recent update that doesn't concern me (Controller), I've yet to experience this bliss. Any ideas when I may get to...
  22. S

    Why does it sound like this? SOLVED

    The 1st line shows a 2 amp stereo rig, and the change in chord shows a change in stereo field - it moves toward the center. 2nd and 3rd lines has a weird rattle to it (recorded at low volume direct to pc). 3rd clip is NOT pinch harmonics, just single note legato - aliasing? 4th line shows single...
  23. S

    Recording guitar and fx

    I've done some reading in the manual, and searching here. I'd like to be able to send my amp out dry from output one, and the fx only to output 2, so I can record them on a separate stereo track and mix to taste. If this isn't possible, what is my 2nd best option? Thanks - Shep
  24. S

    Feature request

    I searched to see if it's possible (and if it's possible I'm not doing it right), but can't find an answer to this question. Is it possible while saving, when the window asks what patch you want to save to - to hear the patch you're choosing to save to (especially a different patch #), ensuring...
  25. S

    It is

    here!!! - and it is everything I've hoped it would be. Sounds great (and different, going from my '86 Charvel Model 6 to my Jem). So glad I decided to jump. I have one question as far as editing is concerned... I tweaked, decided I wasn't happy, wanted to get back to the original patch - out of...
  26. S

    Making Purchase

    I'm ready to pull the trigger on a Ultra. The Yahoo site shows it in the cart, and I may choose shipping. Does this mean that the unit is absolutely, positively in stock and will be shipped out immediately? Also, is there a cutoff time for the order that would make shipping occur a day later -...
Back
Top Bottom