Search results for query: *

  1. brokenvail

    FM9 Firmware Version 7.00

    So for this FW nothing is needed to be done to my presets for them to be updated but on FM3 I need to manual save each preset again?
  2. brokenvail

    FM9 Firmware Version 7.00 public beta (1)

    If using kill dry is ingain still active?
  3. brokenvail

    Couple questions

    I use one preset for all my guitars. I let their difference be what they are
  4. brokenvail

    FM9 Firmware Version 4.00 public beta 1

    Hmmm
  5. brokenvail

    FM9 Firmware Version 4.00 public beta 1

    But what changed on the iii orginally that then go brought down to the Fm’s?
  6. brokenvail

    FM9 Firmware Version 4.00 public beta 1

    Bump for my comment above. An anyone tell me about the new reverb mix strategy?
  7. brokenvail

    FM9 Firmware Version 4.00 public beta 1

    What is the new reverb mix strategy?
  8. brokenvail

    First time with FM9 out in a rehearsal... mono?

    You can set the output to sum. You could have phase cancelation depending on how you set up your patch. Ironically enough on my FM3 I sum to mono when needed but on my FM9 due to denser effects I just use my left side only of my stereo patch. It works just fine for me
  9. brokenvail

    How do you guys deals with different guitars?

    I make 0 changes between guitars. Most of my friends think I am nuts since we have so many preset slots to make different presets for each guitar. I just let the difference be what they are. I juggle through 10 guitars. Different wood styles. Both F and G scales. I have singles, buckers and p90...
  10. brokenvail

    Swapping preset locations from front panel?

    Can we swap preset locations via front panel? I know in edit we can just drag and drop and they swap. Wonder if it can be done via front panel
  11. brokenvail

    Parameter batch set?

    Does FM9 edit have Parameter batch set? I only seen it mentioned for Fm3 edit
  12. brokenvail

    FS Kemper stage, Mission Kemper Exp + case

    Bump
  13. brokenvail

    FM9 Case?

    Here is the Sc2311. Have almost two inches in the bottom gap
  14. brokenvail

    FS Kemper stage, Mission Kemper Exp + case

    Bump
  15. brokenvail

    FM9 Case?

    On par with the 365 is saying a lot! I have a 365 and love it. I tried to have my bass player buy this bag because it seemed cool when I looked into it. I bet a lot of guys will buy one now that you posted this.
  16. brokenvail

    FM9 with Gear by Ceba Shields\protectors

    You sell those? How much?
  17. brokenvail

    Is OMG9 the most efficient layout?

    When using FM3/FC6 together I modified the OMG layout. On FM3 I always have my lead scene on far left button and tap/ tunner on far right. Center button I have set to toggle between scene and preset mode and hold for Effects mode. I live mostly in scene mode. I have 6 scenes on fc6 and bottom...
  18. brokenvail

    FM9 Case?

    My buddy bought this case for exactly this reason. To roll it through air ports while on tour
  19. brokenvail

    FM9 Case?

    I had thought of getting the 24 and putting ev2 in main pocket with it but ended up ordering the SKB sc2311. I own a few of the sc2111 (I have also owned the gator variant) and it is just impossible to beat the protection for the price
  20. brokenvail

    FM9 Case?

    It is the Helix rolling case by gator
  21. brokenvail

    1 week with Fm9...might stick with Fm3

    There is a sound difference if you were using low res reverbs and std res ir in the 3 then make everything max res on the 9. That is where I found the difference. Is that difference alone worth it? Possible not. I am keeping my 3 for places where stage is small or I need to back a little lighter...
  22. brokenvail

    FM9 sounds different than FM3?

    Use your own. Without changing things to hi res. You prob know your preset best.
  23. brokenvail

    FM9 sounds different than FM3?

    I loaded up my FM3 patch. Switched everything to heighest Rez/ density and I def heard a difference that way.
  24. brokenvail

    FM9 Case?

    I went to buy one and they have no more. lol have the sc2111 and want this one
  25. brokenvail

    FS Kemper stage, Mission Kemper Exp + case

    Selling as a set. Kemper stage. Green Kemper Mission SP1 expression pedal. SKB hybrid bag/ case (Very sturdy, great protection.) $1600 shipped to lower 48 states.
  26. brokenvail

    Delay Time bug?

    Right
  27. brokenvail

    Can you import FM3 Presets

    Reason why plex delay seems to take up more CPU is because the reverb now has its own core (as does delay). They basically take up no additional CPU
  28. brokenvail

    Issue with Delay block when importing FM3 presets

    Just loaded my FM3 patch to my 9 and that delay parameter was messed up. I pulled up my 3 for a side by side and that parameters was not there at all (I am not on latest Fw). I bet that is the issue
  29. brokenvail

    FM9 Case?

    Do the bags have any tag inside or anything else? I think we all guest them bag for Metro 20 was the right bag and would work but fireproof bag almost looks like the nano + bag
  30. brokenvail

    FM9 travel cases?

    El Padrino bought the Helix gator case with wheels. That seems like a nice option
  31. brokenvail

    FM9 Case?

    My buddy bought the gator case made for the helix with the wheels. Case is a bit big but he said some foam will fix that. He is very happy
  32. brokenvail

    FM9 Case?

    How tight is the fit? Looks super snug (almost too snug)
  33. brokenvail

    Loose IEC port?

    WTH
  34. brokenvail

    FM9 Case?

    Killer
  35. brokenvail

    Waitlist Email

    Def don’t do that. Warranty are non transferable. An order purchased under that guy will only Jones a war roto him
  36. brokenvail

    Waitlist Email

    Just try it. The email says the track but in the passed nothing stopped someone from using someone else invite
  37. brokenvail

    Waitlist Email

    Fractal does not take actual orders for out of stock items. Yes there was a time that the Ax8 could be bought without a wait. Eventually it would go out of stock and if it was out of stock a while they would start a list again. It would eventually be back in stock with no list. This cycle...
  38. brokenvail

    Waitlist Email

    When there is a waitlist for a product that gets discontinued those ppl are rolled to the top of the list of the product that replaced it
  39. brokenvail

    Studio Slip for FM9

    My buddy keeps an ev2 in the top pouch
  40. brokenvail

    Studio Slip for FM9

    No it was not in front of me. I have owned their product before so I know what I am looking at when I see it. Mono stuff is also designed for use with cars, subways ect but I am sure you know that already
  41. brokenvail

    Studio Slip for FM9

    Yes Mono discontinued both the Kontroller and 365. As soon as I saw the Studio Slip I thought it looks too thin. I am using an SKB SC2111 very inexpensive. A bit bigger than FM9 and super sturdy
  42. brokenvail

    Studio Slip for FM9

    Is there enough padding to not worry about the ev being up there
  43. brokenvail

    FM9 Full Res IRs possible at some point?

    Curious what FAS says. Although everything you said is right the FM9 uses the cores different. For example delay and verb each have their own core
  44. brokenvail

    I love my AX8 Dumble... why can't I get the FM3 to duplicate???

    I did not get the FM in the ball park of what I wanted until I added my hi/ lo cuts and loaded up my preferred IR. Those first two steps were crucial
  45. brokenvail

    Pitch block octave up?

    Yes this. Why in the world did I not think of chromatic? SMH thx
  46. brokenvail

    Pitch block octave up?

    Where? How?
  47. brokenvail

    Pitch block octave up?

    Yes I know but do we have an octave up or any other one of the options in the pitch block to do an octave up?
  48. brokenvail

    Pitch block octave up?

    Does the pic the block have an octave up options? I use the down all time
  49. brokenvail

    Only one pitch block...Very Disappointed

    Do you use multiple pitch blocks at once? Fm hss For channels AX8 only had 2
  50. brokenvail

    Retrieve history of preset modification

    No
  51. brokenvail

    Second Guessing Fm9 Order

    No it is literally the same. Not sure how you have been around but I have been for over a decade. It seems to happen with every launch products launch and someone just bought the previous version like 18 days prior. It is very unfortunate. It is one of the reasons forums always have people...
  52. brokenvail

    Second Guessing Fm9 Order

    There is always buyers remorse with every product launch
  53. brokenvail

    Second Guessing Fm9 Order

    I have a Fm/FC combo. I bought them together because my brain said no way the fm alone is enough foot switch wise. Although I mostly use them together I figured out a ways to do so much with just the fm3 that I am like damn if I get the 9 I lose my more compact alternate set up 🤦🏻‍♂️
  54. brokenvail

    Biggest struggle-dialing patches

    The KZ’s have a switch in back that kicks in a low cut. Clears up mudd
  55. brokenvail

    Fulfillment Friday?

    The fact that Fractal took a different approach and announced a product that they were basically ready to start shipping is very cool. To think that in less than 2 weeks of announcing ppl will have it is awesome. They did say there was a limited amount for this first round but more coming. As...
  56. brokenvail

    Fulfillment Friday?

    Unless they live very close first those first shipments will start delivering anywhere between Tuesday and Friday next week
  57. brokenvail

    Toggle From Presets to Scenes with External Footswitch

    Yes
  58. brokenvail

    FM9 Case?

    Skb sc2110
  59. brokenvail

    Announcing the New FM9 Amp Modeler/FX Processor

    Do you own a QC? It is very much in infancy stage. The cpu optimization for its effects was way off and they don’t even have things like a volume block. They fix some optimization but still no volume block. If they keep tweaking and refining it will really kill one day but that day is not today
  60. brokenvail

    Stereo Cab Panned or Centered?

    I use two IR’s but it is same cab with two different mics and I run them centered. I have my verbs and delays in stereo after the cab block
  61. brokenvail

    FM3 / FC6 / FC12 Gigbags?

    For FM+ FC+ Ev not mounted to a pedal board nothing beats this bag for the money SKB 1SKB-SC2111 21 x 11 x 3 Inches Controller Soft Case
  62. brokenvail

    If a used FM 3 has the headphone jack can I assume it's also has the Cygnus OS?

    Any FM3 can have the latest FW
  63. brokenvail

    How do you get your clean

    Although I use one amp for everything I find that if you use different amps but keep the same IR it feels less abrupt/ unmusical
  64. brokenvail

    Chromebook for FM3 and Axe3?

    I use a net book got running editors
  65. brokenvail

    My FM3 rig (+ presets)

    Lol I like mine that way too
  66. brokenvail

    layouts issue

    Wonder if the layout change is connected to the hold feature and OP is not releasing switch fast enough?
  67. brokenvail

    Tucana amp

    I have not tried it but the Triptik has been my number 1 for years
  68. brokenvail

    FM3 with and without FC6

    You confirmed an idea I have been having with your second layout. I will do a modified version of it!
  69. brokenvail

    Boss FV-500H expression pedal issues

    To me that is a lot of dead space. But if it doesn’t bother you then stay with it. I too loved the size and how it felt under my feet. The EV1 is about the same size
  70. brokenvail

    Boss FV-500H expression pedal issues

    What AJ said is right. With that said those pedals have a decent amount of dead travel to them. When fractal launched the EV pedals I ditched my boss pedal
  71. brokenvail

    " Global Performance Controls " ...... not working "globally " ..... (?)

    Prayed for global blocks since Ax8!
  72. brokenvail

    Scary moment at gig last night with the FM3...

    Had you engaged a block or channel that maybe you had not at other points on the evening
  73. brokenvail

    FM3 with and without FC6

    I have a lay out set up for when I use FM alone with a dual aux switch and a modified OMG9 for when I use FC6. My FM default power up layout is my OMG but a simple twist of a knob puts me in my other stand alone layout
  74. brokenvail

    Clean model hit with drive vs OD channels

    Funny because I hate the helix drives lol. Def whatever works best for the user is their best practice
  75. brokenvail

    Drive Block vs. Input Drive

    Here you go https://wiki.fractalaudio.com/wiki/index.php?title=Amp_block#INPUT_BOOST_.2B_BOOST_TYPE_.2B_BOOST_LEVEL
  76. brokenvail

    Drive Block vs. Input Drive

    I think OP is talking about the built in boost in the amps that have a few models to choose from
  77. brokenvail

    R Ratio Values?

    Anyone know how I can figure out what ratio to use to get a .8th if I set tap to 8th? If I must I will gladly invert it and set tap to .8 if getting the ratio to give me an 8th is easier to figure out.
  78. brokenvail

    Using a filter blk to sculpt ambient MTD?

    This is a super long shot but back in 2017 I ripped someone settings from the MTD block with a filter behind it. They used this for ambient delays and swells. It worked killer on my Ax8. I have spent a long time combing through very old threads trying to find it with no luck. Any where here...
  79. brokenvail

    Multi-Delay Input Diffusion Demo

    Hey @philipacamaniac did you ever recreating this on the FM3? I tried to DM you but system said I couldn’t
  80. brokenvail

    Clean model hit with drive vs OD channels

    In the past I have used models of OD channels (triptek) with not a tone of gain then used Od/ drives to get more gain/ textures ect. Recently I have found that if I use Triptek clean and hit it with a Dist model I get a fatter tone. Any one else using clean models and hitting it with drive vs...
  81. brokenvail

    Like a Glove

    I have a Kontroller bag as well as the 365. When I use the fm stand alone with ev2 and 2 button aux switch I use the 365. When using FM + FC + Ev2 I use https://reverb.com/item/3488211-skb-1skb-sc2111?utm_source=rev-ios-app&utm_medium=ios-share&utm_campaign=listing&utm_content=3488211
  82. brokenvail

    Per preset changes not showing up when I take the fm3 fc 6 to practice

    Are you using the OMG set up/ layout?
  83. brokenvail

    Now everyone has Cygnus, do you think you should still reduce cab block hi's from 20,000 to 6,000-8,500

    I always hi/low cut
  84. brokenvail

    True Story

    More than likely this is the case
  85. brokenvail

    True Story

    I know you are not asking for opinions but I think the singer should speak up. They will hurt their voice
  86. brokenvail

    FM3 Firmware Version 4.00

    Did you come from any of the betas? If so did you do reset parm and soft reset amps?
  87. brokenvail

    Shorter FASLINK cables

    Hmm good question. Currently when using FM/FC6/Ev2 I run the ev between the FM and FC
  88. brokenvail

    Kemper new iOS/iPad app, do you think fractal will be next?

    I feel like Fas, Kemper, L6 and QC are not worried about boss (though I have heard it is a cool unit)
  89. brokenvail

    Kemper new iOS/iPad app, do you think fractal will be next?

    I think Fract pad is great. The blue tooth stuff with dongles was iffy but using a cable always rocked. To this point FAS and L6 have seemed to have had no interest in iOS editores. Kemper has started something interesting by doing an IOS editor. I believe the QC is supposed to have an iOS...
  90. brokenvail

    Kemper new iOS/iPad app, do you think fractal will be next?

    I use a cheap 2 in 1 from Walmart for my various editors
  91. brokenvail

    Kemper new iOS/iPad app, do you think fractal will be next?

    For all these years fractal has avoided making an iOS app. Kemper having built a blue tooth module into that stage for later use was smart. They seems to think way a head and just get to stuff when they can.
  92. brokenvail

    FM3 Footswitchs

    Do you also use external footswitchs? I have Each switch toggle between 2 scenes. Hold on two buttons get me scene 7 and 8. I have an un assigned hold. I can use. I use an external switching to tap tempo/tuner and give me a different view with effects IA’s
  93. brokenvail

    Travel bag to hold FM3 and 13” laptop?

    It is a fantastic choice!!! Hope you got a good price. I bought one for my brother and one for my self a few years back. Due to size the sellers lost their butt on the shipping cost.
  94. brokenvail

    Travel bag to hold FM3 and 13” laptop?

    Mono 365 bag if you can find one
  95. brokenvail

    Cygnus is the holy grail

    I have been around FAS since 2010. Their is always big praise around the big FW changes. FAS has been sounding great for for a long long time. I have not had a time in all these years that I was not happy with my tone. As I result I don’t get super pumped any more for FW updates to the modeling...
  96. brokenvail

    Do drive blocks need to be refreshed?

    Amp blocks have to be refreshed after Fw updates. Now that drive blocks are in line with big brother do they need to be refreshed too?
  97. brokenvail

    Controlling volume jumps when boosting amp with a drive pedal

    I usually run level on drive blocks low. Then again I want the extra gain and color/ texture not more volume. If I want more volume I use the drive block to give me the extra volume I want
  98. brokenvail

    How do YOU clean up a high-gain amp?

    I would do what you do. Drive down add compression. Another option to try is lowing input gain in amp
  99. brokenvail

    Anyone have a tip to stop my Mosky Stand in switch from switching to tuner after tap tempoing?

    Are you using a TRS cable? Did you set it up correctly in the switches menus?
  100. brokenvail

    FM3 + External Dual Footswitch = OMG 5?

    I only use one preset so I use the FM switching to acces all 8 scenes. Each button toggles between two scenes (Fm responds well to quick dbl taps when I need say the send scene on switch 2 when I am currently on switch 1) and two buttons have a scene programmed to the button hold function. I use...
Back
Top Bottom