Search results for query: *

  1. Spoons

    AX8 Rig Nearing Completion

    I'm done with the AX8 rig. Here it is connected to the GR-55 so I can run my Synth guitar through it too. My little rehearsal corner.
  2. Spoons

    AX8 Not Showing Up As A Sound Device??

    Chris, Since I can't go direct from the AX8 digitally I've just chosen to go analog through my sound board to the computer which works good enough for the comparison purposes I'm usually needing. If I absolutely need to go digitally, I'll either just wire it in to my Axe-Fx II or transfer the...
  3. Spoons

    AX8 Not Showing Up As A Sound Device??

    I just found that in the manual. I guess I should have read every word of the manual and not made assumptions. I guess I'm forced to run it through my Axe-Fx II or just move patches over to record there. :(
  4. Spoons

    AX8 Not Showing Up As A Sound Device??

    I didn't realize that. Total bummer. So there's no method of direct recording using the AX8?
  5. Spoons

    AX8 Not Showing Up As A Sound Device??

    My Axe-Fx II is identified as Line (Axe-Fx II Audio) device in Sonar X3 Producer but I can't find the AX8 in the audio devices anywhere on my computer. The AX8 is definitely communicating with the computer, I use AX8-Edit routinely. What have I missed? Can someone help? P.S. I'm using Sonar...
  6. Spoons

    AX8 Rig Nearing Completion

    If you're considering making an angled pedal board, make positively sure that the angle of the pedal board combined with the angle of the heal-down position of volume/expression pedals don't exceed the total flex of your own foot. The angle I used for this pedal board plus the angle of the...
  7. Spoons

    AX8 Rig Nearing Completion

    Depending on the velcro you choose to use, there shouldn't be any reason to take the feet off the AX8, most velcro will attach without a problem. The fabric I'm using on the board is double sided and neoprene filled making it a soft cushioned surface, you can see the dents the AX8 feet make in...
  8. Spoons

    AX8 Rig Nearing Completion

    Here is the PDF document with the drawings. http://www.srwspoon.com/PedalBoardComplete.pdf
  9. Spoons

    AX8 Rig Nearing Completion

    I use four strips of 2" wide velcro hook with pressure sensitive adhesive on the back, cut to length, peel the paper off and stick it on. so it doesn't interfere with the rubber feet or screws.
  10. Spoons

    AX8 Rig Nearing Completion

    This is not the finished product yet, it's still quite ugly right now but here are the photos I promised, I'l try and remember to attach the PDF drawings sometime on Monday. Those staples are really visible when the light is reflecting directly off of them, under normal lighting, they completely...
  11. Spoons

    Show Us Your AX8 Rig! (post your pics)

    The new AX8 guitar rig is coming along nicely; 31 pounds of absolute awesomeness! I still have to apply the texture on the exposed wood surfaces that are currently primed black. Under the components is a layer of fabric glued and stapled to the wood that acts like velcro loop and I apply...
  12. Spoons

    Something wicked this way comes...

    Here is what I'm going to be using for my weekly gigs that don't require any stage sound. https://forum.fractalaudio.com/threads/ax8-rig-nearing-completion.136527/
  13. Spoons

    Something wicked this way comes...

    Just saw your question. I work in a manufacturing plant. I'm the Manufacturing Engineer, Product Designer, CAD Drafter, Quality Control, Web Designer, Machine Programmer, IT Department, and that's all before lunchtime. :) We use the router in the wood shop for making custom products that we...
  14. Spoons

    AX8 Rig Nearing Completion

    Blaggers, Check out this full size Axe-Fx II rig I designed and built. https://forum.fractalaudio.com/threads/something-wicked-this-way-comes.75171/page-3#post-1097941 http://www.srwspoon.com/Evolution/EvolutionCabinet.html
  15. Spoons

    AX8 Rig Nearing Completion

    Added an additional photo above. I'll include a drawing with mm too. Since you're and engineer would you like a solid model; if so, check to see what formats your CAD software will accept. Cables are custom built from Best-Tronics Mfg. Inc. https://btpa.com/ The cables for thewireless and...
  16. Spoons

    AX8 Rig Nearing Completion

    Do you prefer standard fractional inches, decimal inches, or do you need it in metric?
  17. Spoons

    AX8 Rig Nearing Completion

    Tomorrow afternoon I'm taking everything off of it to put the final coats of texture on it, I can get some photos then. I do have CAD drawings in my office, would you like me to link a PDF document here for you to see?
  18. Spoons

    AX8 Rig Nearing Completion

    The new AX8 guitar rig is coming along nicely; 31 pounds of absolute awesomeness! TOP VIEW SIDE VIEW NICE FIT IN THE GATOR GKPE-61-TSA CASE
  19. Spoons

    Wish Axe Edit Software - All Versions for All Models

    I guess I should have used that fancy yellow "Wish" prefix for this post. Live and learn.
  20. Spoons

    Wish Add Engl Special Edition amp

    I almost purchased one of these Engl Special Edition beast heads a while ago gasping at the amount of money I'd have to spend, then I looked at the Engl Special Edition Preamp and choked at the amount of money I'd have to spend then I'd still have to add more money to finish it out. I need a LOT...
  21. Spoons

    Wish Add Engl Special Edition amp

    Which particular part of the amp, with 6 basic sounds and 24 switchable sound, 4 channels: Clean, Crunch, Lead 1, Lead 2, each in modern or classic mode, mega-low punch, it's loaded with lots of options that change the tone, it could turn out to be a pile of different amp models in the Axe-Fx...
  22. Spoons

    Wish Axe Edit Software - All Versions for All Models

    I have an Axe-Fx II (hundreds of presets developed over the years) and an AX8 new the end of 2018. Fractal Audio should develop and include in all the current and future Axe Edit software the ability to convert a patch from one hardware version (AX8 or Axe-Fx) to another on the fly with a...
  23. Spoons

    AX8-EDIT Bug

    Running Windows 7 Professional, Service Pack 1.
  24. Spoons

    AX8-EDIT Bug

    ERROR SOLVED! (At least the error I've been getting) I just figured out that the error I've been getting is due to the fact that I had both my Axe-Fx II and the AX8 turned on while using AX8-Edit. I've confirmed multiple times that this error ONLY exists under that condition. To the people...
  25. Spoons

    AX8-EDIT Bug

    The message is... Communication time-out. AX8-Edit was unable to complete the following communication request: Block Library Query: effect_get_all_params
  26. Spoons

    AX8-EDIT Bug

    I haven't found a place to post comments about AX8-EDIT so I'm putting this here. Every time I try to save an amp into the blocks library the software comes up with an error message and stops to function after that. I've been using this feature in AXE-EDIT for many years, it was working the...
  27. Spoons

    How to use two footswitches at the same time?

    Yup I know you were sorta joking; but seriously, I think you're blowing this all out of proportion. If you're just jamming then create yourself a couple of different patches in one bank just for jamming that have a variety of effects that you usually use in them and do the pedal board tap dance...
  28. Spoons

    Something wicked this way comes...

    I understand. I'm still using this for big shows, I just got the AX8 for the routine weeks usages. The AX8 is GREAT for a light package with all the bells and whistles I use for the weekly stuff. THere are photos of the insite using the webpage link in my post above. Thanks
  29. Spoons

    Something wicked this way comes...

    I finally made a web page showing the entire process. http://www.srwspoon.com/Evolution/EvolutionCabinet.html Lot of photos, good, bad, blurry, scaled badly, but it's all there.
  30. Spoons

    How to use two footswitches at the same time?

    I do this literally all the time with my MFC-101 / Axe-Fx II rig and right now I'm choosing to only doing it in the AX8 with two external toe switches built into the Mission Engineering SP-1 Pedals. This works GREAT for one touch lead that does a bunch of stuff on one patch or turning on and...
  31. Spoons

    New Fractal AX8 Owner!

    I've been using the Axe-Fx Ultra and the Axe-Fx II for many, many years and I'm having no problem with the transition to the AX8. This is a weight down size for my multiple weekly small space usage, I still use the big rig for other things. AX8 Edit is GREAT!!! Get it and use it!!
  32. Spoons

    Recommendations for Pedalboard for My new AX8 + 2 Pedals

    I'm looking for recommendations for a pedalboard to mount my new AX8 with two Mission Engineering Pedals on. Any photos of such a pedal board in use with an AX8 would be nice to see. Thanks Spoons
  33. Spoons

    Using Fractal Software On New 2-in-1 Laptop Computers?

    Hi everyone, it's been a long while since I've been on here. I have a questions... I am seriously thinking about getting a 2-in-1 laptop computer similar to this one; I plan on immediately using this computer for Axe-Edit, MFC-Edit, Fractal-Bot, and down the road likely using it for AX8-Edit...
  34. Spoons

    Using Fractal Software On New 2-in-1 Laptop Computers?

    Hi everyone, it's been a long while since I've been on here. I have a questions... I am seriously thinking about getting a 2-in-1 laptop computer similar to this one; I plan on immediately using this computer for Axe-Edit, MFC-Edit, Fractal-Bot, and down the road likely using it for AX8-Edit...
    • Spoons
    • Thread
    • 2-in-1 axe-edit fractal-bot mfc-edit software
    • Replies: 0
    • Forum: MFC-Edit
  35. Spoons

    Show us your MFC setups! (post your pics)

    Please put that setup on a bathroom scale and tell me how much it weighs! Make sure you have the cover on it when you weigh it. Thanks
  36. Spoons

    Show us your MFC setups! (post your pics)

    That's a really nice and clean setup!! What carrying case you are using???
  37. Spoons

    Something wicked this way comes...

    Thanks; it's solid, it looks good, and it sounds great! I ended up with a Meas Black Shadow and a Celestion Vintage 30 in the cabinet. I still have to make the IR's and tone matches for it so the mains get the same sound but it's pretty close right now. Yes I did; with all the stuff I have...
  38. Spoons

    Something wicked this way comes...

    That's a pretty darn slick little unit!!! I like how you have the controls pointing up for easier access. Great job!!!
  39. Spoons

    Something wicked this way comes...

    It's been a long time coming, but my Evolution rig is 100% complete! I’m currently working with a distributor in the Chicago area to get it available to interested consumers and final MSRP has not yet been set but it will likely be steep for this high quality cabinet. There will likely be two...
  40. Spoons

    FX8 Update

    Interesting rig and a job well done!!! I've actually been actively thinking about getting something along these lines for my small venue combo amp rig. Now there's a new game in town to look at and compare.
  41. Spoons

    Best-Tronics now offering cables specifically designed for Fractal Audio Products

    Retail location, do they even have a retail location? I was at the assembly plant.
  42. Spoons

    Post Your Rig!

    My new Evolution rig is complete!
  43. Spoons

    Best-Tronics now offering cables specifically designed for Fractal Audio Products

    Yesterday (September 2, 2014) I spent nearly two hours at Best-Tronics in Tinley Park, Illinois. The place is everything it claims to be - and much, much more! The people are very professional and easy to work with. It was worth every minute of the 6 hours driving time to and from my home in...
  44. Spoons

    Wish MODIFY UP & DOWN INSTANT FUNCTION

    That solved the issue. I must have blown right past that page a couple of times when I did my PDF document searches. THANKS!!!!!!!!
  45. Spoons

    Wish MODIFY UP & DOWN INSTANT FUNCTION

    I am using the Axe-Fx II. Currently I use my MFC-101 in the Axe-Fx Mode with 5 presets. CONDITION: I am on Preset #003 (Bank 1) and I want to go to Preset #024 (Bank 5). What I need to do to accomplish this task is to press the UP switch four times and then press the switch associated...
  46. Spoons

    Bug? Tuner Bug In MFC-101 - Firmware 3.05 [SOLVED]

    Reloaded the firmware, and it works fine now. Must have glitched when I loaded it the first time.
  47. Spoons

    Bug? Tuner Bug In MFC-101 - Firmware 3.05 [SOLVED]

    I loaded the firmware for the MFC-101 Mark III and now when I press the tuner button on the MFC-101 I get the message "Waiting for tuner..." on the MFC-101. The Axe-Fx II does display the tuner.
  48. Spoons

    Axe-Fx II fw14 Released!

    Can anyone identify what the TAF_Shadow_MIX released in Firmware 14.00 is? I can't seem to find specific information about this IR from The Amp Factory as to what the "mix" is, what speakers, what mics, or what the mic placement was?
  49. Spoons

    Question about the TAF_Shadow_MIX

    Can anyone identify what the TAF_Shadow_MIX released in Firmware 14.00 is? I can't seem to find specific information about this IR from The Amp Factory as to what the "mix" is, what speakers, what mics, or what the mic placement was?
  50. Spoons

    Am I the only one who doesn't use Axe Edit?

    I use both Axe Edit and front panel controls about equally, I don't really favor either method. If I'm building new presets, I have a tendency to lean a bit more towards Axe Edit; however, when I tweak I have a tendency to lean a bit more towards using front panel controls.
  51. Spoons

    FASLINK™ Adapters are here!

    Hi everyone, Please clarify a couple of things for me... Does a FASLINK connection do ABSOLUTELY EVERYTHING that an Ethernet connection does? YES or NO If yes; does the FASLINK do it at ALL the same speed? If no; what are the things you cannot do with the FASLINK? Thanks Spoons
  52. Spoons

    Wish Official MFC Expansion Module

    This is still probably something I wouldn't use, but that didn't stop me from thinking about idea on how to accomplish it. :) Maybe to accomplish this idea it could be as simple as connecting any midi controller you like to the MFC-101 via the MIDI In/Out ports on the MFC-101 while the MFC-101...
  53. Spoons

    Axe-Fx II Firmware 15.00 Public Beta

    With all due respect for personal opinions; something needs to be cleared up. There are some that don't realize how Fractal Audio defines Beta; here let me quote the comment that began this entire thread that sums it up quite nicely.... There is a reason that Beta is called Beta.
  54. Spoons

    Axe-Fx II Firmware 15.00 Public Beta

    Programming is part of my livelihood; I don't think a lack of understanding of what Beta means is fair to say of others, some just choose not to be Beta testers. Honestly; these days, I simply don't have the time for another backup, loading Beta firmware, testing everything on all 20 of my...
  55. Spoons

    Axe-Fx II Firmware 15.00 Public Beta

    I'll probably wait until it is no longer Beta.
  56. Spoons

    My new Axe-Fx + MFC-101 Rig!

    Thanks Honestly that depends on what I'm doing. For my regular weekly gig, I usually try to limit it to 2 guitars which would normally me no more than 10 patches to deal with unless there was a song that actually required something way outside my normal patch setup. I have 5 basic patches for...
  57. Spoons

    My new Axe-Fx + MFC-101 Rig!

    I use the FV-500H it has a fully functioning Expression Pedal output; there is absolutely no functional reason to get the stereo "L" version.
  58. Spoons

    My new Axe-Fx + MFC-101 Rig!

    BOSS Switches Left-to-Right Volume boost only Amp Boost for gain channels or Saturation Boost for clean channels. Lead for all channels (includes a separate Volume Boost, EQ shift, Deay, sometimes an added drive) Tap Tempo BOSS Pedals Left-to-Right Special (controls things like tempo in...
  59. Spoons

    My new Axe-Fx + MFC-101 Rig!

    Ok, here are the weights of my pedal board: 35.5# Pedal Board 23.5# Gator Case 1.5# Cable 60.5# Total
  60. Spoons

    My new Axe-Fx + MFC-101 Rig!

    I honestly don't know; I'll have to put it on a scale sometime and let you know. I'll post it here when I get it done.
  61. Spoons

    Show us your MFC setups! (post your pics)

    http://swww.srwspoon.com/image/Photo1.JPG http://www.srwspoon.com/image/PedalBoardCase.jpg A few people have asked about the dimensions of this my pedal board setup so here you go. Here is a link to a drawing of the pedal board. http://www.srwspoon.com/files/PedalBoard.pdf You...
  62. Spoons

    My new Axe-Fx + MFC-101 Rig!

    http://swww.srwspoon.com/image/Photo1.JPG http://www.srwspoon.com/image/PedalBoardCase.jpg A few people have asked about the dimensions of this my pedal board setup so here you go. Here is a link to a drawing of the pedal board. http://www.srwspoon.com/files/PedalBoard.pdf You should know...
  63. Spoons

    My new Axe-Fx + MFC-101 Rig!

    Now I've got to figure out what I want to do with my Axe-Fx Ultra. Maybe I'll sell it and get a new Carvin bass?
  64. Spoons

    My new Axe-Fx + MFC-101 Rig!

    Hey!! It's been a while.
  65. Spoons

    My new Axe-Fx + MFC-101 Rig!

    It is absolutely AMAZING what can be done with one single channel in the Axe-Fx II when you use expand the MFC-101 to its full potential!!! http://swww.srwspoon.com/image/Photo1.JPG http://www.srwspoon.com/image/PedalBoardCase.jpg It's a Gator Case GKPE-61-TSA 61-Key ATA Keyboard Case with...
  66. Spoons

    Show us your MFC setups! (post your pics)

    It is absolutely AMAZING what can be done with one single channel in the Axe-Fx II when you use expand the MFC-101 to its full potential!!! http://swww.srwspoon.com/image/Photo1.JPG The complements are rolling in with my new rig; I'm well pleased! :) P.S. iPhone photos can't do justice to...
  67. Spoons

    My new AMAZING custom pedal board !!!

    SWEET!!!
  68. Spoons

    Label choices

    I can certainly vouch for GIGWRX!!! http://swww.srwspoon.com/image/Photo1.JPG http://www.srwspoon.com/image/Photo3.jpg Gigwrx did a GREAT Job with my custom labels!!!! iPhone photos don't do it justice.
  69. Spoons

    Show us your MFC setups! (post your pics)

    I have a new case for my pedal board! http://www.srwspoon.com/image/PedalBoardCase.jpg It's a Gator Case GKPE-61-TSA 61-Key ATA Keyboard Case with TSA Latches. It's not cheap; but it is WELL built, has rollers like a suite case and everything fits perfectly!
  70. Spoons

    MFC-101 MKIII randomly not controlling Axe-Fx II

    David, Based on what you wrote, I suspect one of two things; First: Did you try to have more than one switch assigned to the same task of switching the same thing. By what you wrote, that was the impression I got. Check the MIDI CC values on both the Axe-Fx and the MFC-101 and see if...
  71. Spoons

    MFC-101 MKIII randomly not controlling Axe-Fx II

    Firmware 3.03 solved all the issues. I guess I shouldn't have paid any attention to the "This version brings full compatibility with Axe-Fx II XL" note under the firmware update.
  72. Spoons

    MFC-101 MKIII randomly not controlling Axe-Fx II

    shasha, Fixed that bad quote in my original comment. It should have read... "This version brings full compatibility with Axe-Fx II XL" Oops. ;)
  73. Spoons

    Wish Official MFC Expansion Module

    I don't know if you all are using the MFC-101 to it's full capabilities, but here's what it might look like if you were. I simply have no use for an expanded module this setup does more than I can ever imaging using in one spot, but that's just me. http://swww.srwspoon.com/image/Photo1.JPG...
  74. Spoons

    MFC-101 MKIII randomly not controlling Axe-Fx II

    Ticket created.
  75. Spoons

    MFC-101 MKIII randomly not controlling Axe-Fx II

    Axe-Fx II - Firmware 14.02 (just installed this past weekend) MFC-101 - Firmware 3.02 (installed 2-19-2014 - obtained from Matt) My MFC-101 Mk III is randomly not controlling the Axe-Fx II properly. I'm using the Axe-Fx mode, pretty much right out of the box with all the possible external...
  76. Spoons

    MFC-101 MKIII randomly not controlling Axe-Fx II - Firmware 14.02

    Moved this to the MFC-101 Bugs thread.
  77. Spoons

    MFC-101 MKIII randomly not controlling Axe-Fx II - Firmware 14.02

    I just now noticed that the current MFC-101 Firmware is 3.03, I'm on 3.02 Even though the notes for the update only says "This version brings full compatibility with Axe-Fx II XL" I'll load that this evening and see if that takes care of the problem.
  78. Spoons

    MFC-101 MKIII randomly not controlling Axe-Fx II - Firmware 14.02

    My MFC-101 Mk III is randomly not controlling the Axe-Fx II properly. I'm using the Axe-Fx mode, pretty much right out of the box with all the possible external switches and pedals. What happens is I press a switch to turn on an effect, the light does not go on and the effect does not engage...
  79. Spoons

    Show us your MFC setups! (post your pics)

    I love it when a plan comes together!!! http://swww.srwspoon.com/image/Photo1.JPG http://www.srwspoon.com/image/Photo3.jpg Gigwrx did a GREAT Job with the custom labels!!!! iPhone photos don't do it justice.
  80. Spoons

    New Gigwrx Single Image Sets!!!!

    I love it when a plan comes together!!! http://swww.srwspoon.com/image/Photo1.JPG http://www.srwspoon.com/image/Photo3.jpg Gigwrx did a GREAT Job!!!! iPhone photos don't do it justice.
  81. Spoons

    New Gigwrx Single Image Sets!!!!

    I am not going to take credit for the composition of the photo, that belongs to someone else. As I said before; "Personally I saw many similar flag photos online and I chose to get my flag out and take my own photo for my label set (it took me a couple of hours and about 100 shots to get it...
  82. Spoons

    New Gigwrx Single Image Sets!!!!

    This is a good point. Personally I saw many similar flag photos online and I chose to get my flag out and take my own photo for my label set (it took me a couple of hours and about 100 shots to get it like the one I liked the best - yea, a little OCD about it - ;) ). What people need to know...
  83. Spoons

    New Gigwrx Single Image Sets!!!!

    Written permission sent. Spoons
  84. Spoons

    Show us your MFC setups! (post your pics)

    Can't wait to put them on and show them off!!! Thanks a million for being patient with me so I could get it the way I wanted it!!
  85. Spoons

    Show us your MFC setups! (post your pics)

    This is my set up. Eventually no cords will be seen. http://swww.srwspoon.com/image/PedalBoard2.JPG This is the labels that I'm ordering this weekend. http://www.srwspoon.com/image/MFC-101-With-Labels.jpg The other 8 labels are still being designed.
  86. Spoons

    The real programming and layout finally begins.

    Here is a mock-up of my custom designed GIGWRX magnetic labels. http://www.srwspoon.com/image/MFC-101-With-Labels.jpg
  87. Spoons

    Something interesting about my new Axe-Fx II

    I noticed something this weekend about my new Axe-Fx II that I was thoroughly impressed with; you really have to go way, Way, WAY out of your way to make a sound that I would actually consider "bad" and that is true using any amp sim with any speaker sim. Sure there are huge differences between...
  88. Spoons

    Show us your MFC setups! (post your pics)

    I've got to have many channels in this old rig… …to accomplish the same things that I can now do with one channel and the setup below. I guess I'm a pedalboard nerd and damn proud of it. ;) P.S. That is the initial layout, you won't see any wires whatsoever when it's all done.
  89. Spoons

    The real programming and layout finally begins.

    I guess I resemble that remark, sobeit. I've got to have many channels in this rig… …to accomplish the same things that I can now do with one channel and the setup below. So I guess I'm a pedalboard nerd and damn proud of it. ;)
  90. Spoons

    The real programming and layout finally begins.

    When it's done you won't see any of the cables or connectors at all.
  91. Spoons

    The real programming and layout finally begins.

    Oh I completely forgot to say that the little post-it notes on the MFC-101 will be replaced with a set of GIGWORKS Custom Magnetic Labels.
  92. Spoons

    The real programming and layout finally begins.

    Yes, it will be an all-in-one portable rig with a cover; the bottom board is representative of the one that will be used in the final assembly, it's all designed on a CAD just finalizing the final details. I like these pedals, I've been using these kinds of pedals in front of amps for years...
  93. Spoons

    The real programming and layout finally begins.

    The special pedal controls things like Pan/Trem/Rotary tempos. I switched out the special switch and put in a tempo switch. http://swww.srwspoon.com/image/PedalBoard.JPG I like this setup MUCH better.
  94. Spoons

    The real programming and layout finally begins.

    The 4 switches in the front are my rapid access switches, the things I use very routinely.
  95. Spoons

    How do I get the Axe-Fx II to work properly with Sonar X1?

    I got both the WYHIWYG and the dry guitar recorded. Here is where I got hung up on reamping... The only choices I had in the "INPUT 1 LEFT SELECT" were FRONT and REAR; however, when I changed MAIN INPUT SOURCE to USB I could reamp. Thanks for all the help, you got me what I needed to get...
  96. Spoons

    The real programming and layout finally begins.

    http://swww.srwspoon.com/image/MFC-101_Board_Begins.JPG
  97. Spoons

    How do I get the Axe-Fx II to work properly with Sonar X1?

    A to the T, I'll give that all a try sometime this week. THANK YOU!!!!!!!!!! Spoons
  98. Spoons

    How do I get the Axe-Fx II to work properly with Sonar X1?

    I've been using Cakewalk/Sonar for years but I've never ever connected an external device like the Axe-Fx for recording or reamping; I am completely LOST!!! I have my Axe-Fx II connected to the computer via a standard USB device cable and it works just fine with Axe-Edit. I read through pages...
  99. Spoons

    Something wicked this way comes...

    Sorry you feel that way.
  100. Spoons

    Something wicked this way comes...

    If your wondering, it's STILL not done yet. The brackets that I have been waiting for weeks to get finally arrived yesterday afternoon and the only thing I had time to do was to make sure they fit properly, they did. Now I have absolutely no time until the latter part of next week to do...
Back
Top Bottom