Search results for query: *

  1. 6

    Accessing Blank Preset Ranges

    Hi - I just got the MFC mk 3 with my Axe XL. I noticed there are a number of nice blank presets in the XL where I would like to build my presets. Any way to program the MFC to be able to access all the presets on the XL? Thanks!
  2. 6

    Mission SP1/Axe XL/MFC mk3 Question Volume/Wah Question

    Hi Gang - Anyone know how to use the set up the SP1 so it acts as a volume and then way when switched? I wanted to save a block by using the expression 1 to control Input Volume (in my case midi 10 and I use it pre like my volume knob on the guitar), and then external 2 to engage/disengage...
  3. 6

    AxeFx2 FOH/Atomic Help!!

    Hi Everyone - I have the Ultra and just got the AxeFx 2 and just came from a very disappointing rehearsal. I set up all my presets and tones through my twin powered Atomic Powered Wedges (tweeters set at noon) at home. When I went to the rehersal I plugged straight into FOH and the tone...
  4. 6

    Making an IA a Preset Question

    Can anyone point me to how to make an IA in my MFC-101 act exactly like one of my 5 preset switches? I followed Yek's how to (thank you!) and while when I step on the IA it switches to the preset on the Axe2 I can't get it to do the following when stepped on: 1) Show green that it is now...
  5. 6

    Liquid Foot Pro AC Adapter Question

    Can't seem to find mine at the moment. What are the specs? Is it tip negative or positive? Thanks!
  6. 6

    Initial IA States on Liquid Foot Pro

    Hi - Does anyone know how to set the initial IA states on the Liquid Foot Pro to Red/Green in 6 Button Preset mode? I designate what I want on the editor but the red/green initial IA states only show up on S7-S15 but not on S1-S6. Thanks in advance!
  7. 6

    Setting a LF Pro Preset Button as Tap Tempo?

    Hi Guys - If I'm in 6 or 12 preset button mode on my LF Pro is it possible to designate P6 (a preset button) as my tap tempo? Currently I have S16 set as that and would like to move it down. Thanks!
  8. 6

    Volume Pedal Problem

    Hey Guys - I have this recurring problem where I use my Mission expression pedal set up for volume properly calibrated into my Liquid Foot Pro and then into my AxeFx Ultra. Basically there are times when I use it an it is fine as it should to control the volume. Then, occasionally (including...
  9. 6

    AxeFx Ultra Volume Question

    Hey Guys - Silly question, but I'm experimenting with using my Axe Ultra as an effects processor only (no modeling/sims) with the 4 cable method into my amp. My volume is much lower this way than when I plug straight into the amp with my guitar. Is there something I need to tweak so I am not...
  10. 6

    Liquid Foot as a Channel Switcher?

    Can I use my Liquid Foot Pro as a switcher on my multi channel amps (Tone King Metro, Two Rock J-2 and Two Rock 10th)? If so, how do I set this up? Note that the J-2 and TK Metro are TRS cables and the Two Rock 10th is a 6 pin Midi cable. Thanks!
  11. 6

    AxeFx Ultra Question

    Hi Gang - Well I got a G-System limited and love it for the channel switching capabilities but some of the effects limitations keep me coming back to the AxeFx. Well a few questions for our knowledgeable community: My Rig: Two-Rock J-2 Two-Rock 10th Anniversary Tone King Metropolitan Liquid...
  12. 6

    4 Cable Setup, Amp Channel Switcher Question

    Hi Gang - Well I got a G-System limited and love it for the channel switching capabilities but some of the effects limitations keep me coming back to the AxeFx. Well a few questions for our knowledgeable community: My Rig: Two-Rock J-2 Two-Rock 10th Anniversary Tone King Metropolitan Liquid...
  13. 6

    How to use the AxeFx Ultra effects only (non amp/cab sim)?

    Hi - I just got Bogner Duende and Tone King Metropolitan amps and would like to use the effects (delays, choruses, compressor, etc.) of the axefx running through those amps (without the axefx amp/cab sims) and use my liquid foot pro to control and channel switch on the amp. How would I do...
  14. 6

    Midi Light on AxeFx turning off/disconnecting from LF Pro

    Got a question that I'm hoping you guys can quickly answer. Every now and then (seemingly no pattern) the "Midi In" light on the face of the AxeFx turn off and then all the value reset on the patch (no longer have volume control, etc.). I have been unplugging the 7 pin midi cable to the LF Pro...
  15. 6

    Redwirez and Getting them to work?

    Hi guys - After reading on the good press on them on this forum I decided to take the plunge and get them. I followed these directions on the Axe wiki: The Axe-fx Editor 1: Click on settings (upper left hand corner and select preset manager. 2: Select the cabs tab in the left column and hit...
  16. 6

    Setting IA Light for Wah on LF Pro when using Mission SP1-LF

    Hi - I have my Mission SP1-LF all set on my LF and AxeFx. Works awesome. Only thing is that I don't have a light that shows my if it's on or off. Any way to designate an IA switch so that when I engage the SP1-LF for the wah, the IA light on the LF Pro automatically turns on/off (green/red)...
  17. 6

    LF Pro Button Question

    Hi - After playing around with the LF Pro and the AxeFX for a few weeks I think I'm getting the hang of things and how it works (thanks everyone!). I do have a question. I've set up the LF Pro to 12 Preset/Remainder are IA switches. I set 3 of my IA switches to delays. I have each of the 3...
  18. 6

    Several Silly Questions....Thanks in Advance for your Help!

    Hey Gang - First of all thank you all for your help. I have a few questions (I thought I read about these but can't seem to find the posts now....I've read so many): 1) Is there a way I can edit the effects on the Control tab of the I/O? I know there is, I just can't seem to find the...
  19. 6

    How to make BPMs show up in the display of the LF Pro?

    Hi - I go the tap tempo to work, but unfortunately it doesn't say how many BPMs you have just tapped in. Is there a way of getting the BPMs to show up in the display of the LF Pro when you are using tap tempo? Thanks!
  20. 6

    Preset is Skipping on It's Own when used with LF Pro?

    I am setting up my LF Pro with presets now. Everything is cool when the Midi In is not engaged and I can go back and forth between patches no problem and they stay put. Except that I can't see my tuner when I'm in this mode so I need to turn "Midi In" with my 7 pin Midi cable. When I turn...
  21. 6

    Running Multiple Delays

    Hi - I run 3-4 different delays. Is there a way I can set up these to 3-4 different I/A switches so that when I tap on it it overrides the one in the patch? Also, when I step on the patch again or another delay I'd like to go to the original delay in the patch or other delay respectively so...
  22. 6

    Analog/Vintage Delay Like the Eventide Timefactor?

    Hi - I just got my Ultra today and needless to say I'm in heavy absorbing mode. On my main pedalboard I use the Eventide Timefactor and run 4 different delay ranging from a short slapback to one with longer, stronger repeats. All of the ones I use are the Vintage/Analog sounding ones. I'd...
  23. 6

    Liquid Foot Pro Case?

    Hi - Anyone found a nice, form fitting case for the LF Pro? I'm thinking about putting it in my 4U rack case along with my Ultra and don't them banging against each other. Thanks!
  24. 6

    First Time AxeFX User....Rig Setup Questions

    Hi - I'm a pedalboard and amp guy, but new to rack based effects. I'm wondering if the community here can provide some insight into these questions. For those who are going straight to the house from the AxeFx in a live situation, what (if any) amps are you using on the rack? I'm relatively...
Back
Top Bottom