Search results for query: *

  • Users: hole
  • Order by date
  1. H

    FM3 Firmware Version 8.00 beta 1

    Any news on firmware 9? :D
  2. H

    Development with the next firmware

    Wait. they're gonna make it sound EVEN BETTER?
  3. H

    FM3 GAP/SEAMLESS SWITCHING

    magic (But doesn't every block basically have 4 (or whatever number) channels? Even if you don't use the channel, it's still there)
  4. H

    Problem with a used FM3

    As long as it's a solid fit that does not 'wobble' that does not seem problematic to me (and even if it wobbles: if's its stationary that shouldnt be an issue either)
  5. H

    Gapless switching, clean to edge to high gain using an expression pedal

    that is some tasty sounds ! Will certainly download and use it.
  6. H

    Wireless system for FM3

    I have Boss Wl60, Line 6 G30 and G90 and never had any issues with any of those units
  7. H

    Independent volumes for in ear monitor

    I would not recommend running in-ears without some kind of limiter on the signal.
  8. H

    Poll: How many people use screen protectors?

    I have the factory screen protector and on top of that the CEBA thingie.. Absolutely no need to have it like that, but i'm too lazy to change it :D
  9. H

    pitch shift to Eb

    this sounds like me when getting my Digitech Drop...was about to return it.....and they I realised I goofed up! :D
  10. H

    FM3 guitar plays through "phones" but not XLR Output into monitors

    Please post a picture of your grid/layout. Obviously, something is wrong here, but without context, kinda hard to diagnose
  11. H

    Please work on the User Interface

    I say we remove all buttons and encoders and replace those with a joystick. Im sure it will be a joy to navigate all the additional menu's that will be required.
  12. H

    Betas and Austin Buddy Live

    But seriously: you can always roll back a FW update. On the other hand: if it sounds good now, why update?
  13. H

    Betas and Austin Buddy Live

    yes
  14. H

    Distortion/drive pedal question

    As an alternative to using the 'mix' or 'dry level', you could run the drive parallel and use the Level control to control the ratio of dry/overdriven signal you get (in this scenario, keep mix at 100% for the drive block)
  15. H

    Wish Add "switches combination functions" Pressing 1+2 or 2+3

    +1 having more options is always good
  16. H

    FM3 Firmware Version 5.03

    I don't think that a discussion about hardware performance or formfactor belongs in a Fw thread?
  17. H

    How are you using the FM3 Live?

    Same as Chris 1 Bread and Butter preset with 4 main scenes (clean to mean) and one or two 'specialty' presets for specific songs that need 'that special certain sound' I used to be that guy that would have song specific patches, and trying to copy the exact tone for each song we played, but I...
  18. H

    Univibe, Octafuzz, and Fender vibes

    I've got nothing. Love it.
  19. H

    Question about FM3-FC6 setup

    +1 to that
  20. H

    Question about FM3-FC6 setup

    On the fm3 in Layout view the two right most encoders can be used to change layout/view (from memory..not at my unit atm)
  21. H

    Anyone using the FC12?

    ^^you're not using 3 available switches then? (on the FM3) I am using a Morningstar MC6 with the FM3 and couldn't be happier. Perfect footprint, amazing functionality and ease of use.
  22. H

    Blocks in (factory) preset not responding to Midi?

    Solved. Although only one drive, it was drive 2...and I've only got drive 1 in my midi setup . As expected...very obvious. Thanks for the suggestions guys! Much Appreciated @chris: Yes midi is set up properly and was working perfectly in other presets. I think I just haad a brainfart!
  23. H

    Blocks in (factory) preset not responding to Midi?

    It's probably something very obvious, but i'm scratching my head here. (Normally, I'm pretty good at figuring this stuff out, but this time, nothing...) On factory preset "AUSTIN BUDDY'S XTCS FM3" (according to the wiki it's 124, but apparently, I've moved it on my unit), the effect blocks do...
  24. H

    FM3 The Plexi 100 is killer.

    I reported this post to the Admins for the creamy tone and ridiculously tastefull playing. how DARE you.
  25. H

    FM3 Firmware Version 5.03

    We have happiness that is linked to rabies, you guys have pets (particularly cats and dogs) falling from the sky when it is raining...who's the weird one here? :p (to be honest: 'it's raining cats and dogs' has a dutch equivalent which would translate to "it's raining pipe stems"...perhaps it's...
  26. H

    FM3 with AX8 style switching

    If you are familiar with Midi in general, then the MC8 is not difficult to set up. The editor is very user friendly. BTW, you could think about replacing the tuner on the board with another pedal (or leave it off to save weight). I find the one in the FM3 works great (I switch it on and off...
  27. H

    FM3 with AX8 style switching

    I'm not Chris, but I can highly recommend the MC6 or MC8 I have an MC6 myself, and it does everything I need it to (and I am not even use all the features, like FM3 integration). I have it setup in an "OMG-9" like setup. https://forum.fractalaudio.com/threads/my-omc9-setup.172031/ I like the...
  28. H

    Possible to use Midi to switch layouts?

    No. I have requested that as a feature https://forum.fractalaudio.com/threads/midi-change-layout-view.169731/
  29. H

    Rate my guitar preset sound?

    Flying Spaghetti Monster? r'Amen?!
  30. H

    Fractal Audio customer service

    This type of service should be normal (for a product of less a month old), but it isn't. Good to know that Fractal cares about their customers (like we already didn't know from the steady stream of updates and long-running support for the older models)! I have a sImiliar experience with G66...
  31. H

    v4.01 preset sounds/feels different in v5.03

    #31 is my go to factory preset! Sounds awesome in 5.03 flavour
  32. H

    Sophisticated thread about Globally turning off all Cabs in the FM3.

    Yes. If it sounds good to him, all is good. BUT, I think we can all agree that, generally speaking, turning off Cab sim for high gain sounds (when using FRFR or studio monitors) does the opposite of creating a desirable sound. So, I can understand the comments of people suggesting that either...
  33. H

    Which FRFR? Is it worth it?

    I have been running an active Matrix Q12 for more years than I can remember. I like it very much (also for keyboard and emergency bass amp)
  34. H

    Anyone using a Trainwreck as their Marshall?

    Factory Patch "Wreckers' is one of my fav patches. I use those as the basis for all my sounds.
  35. H

    Do FM9 presets work with FM3?

    So what you are actually saying it's NOT a typical FAS forum response?:D (BTW: I agree: very detailed and helpful. Even I understood it!)
  36. H

    FM3 Gen 2?

    If you want to hold out for 'the latest and greatest' you will never be able to buy anything.
  37. H

    FM3 Firmware Version 5.03 beta 4

    This sounds so awesome. I'm gonna try the bitcrusher for sure!
  38. H

    FM3 Firmware Version 5.03 beta 2

    Can someone give me a practical example where "scene ignore" would come in handy. Trying to wrap my head around that one and it's not clicking for me. (To be clear: not saying this isn't a good feature to have, just that i'm too stupid to understand how to use it)
  39. H

    Preset Project Done

    Are you releasing the bank files to the general public @Tonedeaf?
  40. H

    My "OMC9" setup

    I think you can set up an FM3 button to do two things, one with 'tap' and one with 'hold'. Same as I did with the presets and looper button (right most button). Not sure if 3 functions on one button can be done. Haven't messed around with it because it suits my needs. Same for FM3 integration...
  41. H

    Help setting up Morningstar MC6/FM3 for scenes...

    I have a topic where I describe my FM3/MC6 setup. It might help you. https://forum.fractalaudio.com/threads/my-omc9-setup.172031/#post-2075878 Also, the recent update to the MC6 firmware enables more integration between FM3 and MC6 (dynamically getting scene names from the FM3). check out the...
  42. H

    FM3 PEDAL PLATES (TEMPLE AUDIO)

    ^^ this. works perfectly and is rock solid
  43. H

    Enhanced Morningstar Fractal Integration

    It should be possible. In the new firmware for the MC you can retrieve the scene /preset names with a button press. That's just th MC6 sending /receiving some (i suspect) Sysex message to the FM3. There is no reason why that could not be just a command that is send out when you change banks on...
  44. H

    Enhanced Morningstar Fractal Integration

    I have the same thing going on: https://forum.fractalaudio.com/threads/my-omc9-setup.172031/
  45. H

    Travel speaker for FM3?

    I like my Nux Mighty Air. It can take the FM3's input with the correct adapters too. It also can act as a bluetooth speaker, which is is nice. (I know it has built in modelling and you are not looking for that, but don't discount it just because of that. The sound quality is really quite good...
  46. H

    FM3/Morningstar MC6 MIDI In

    Thanks for the heads up on the update. I'll check it out!
  47. H

    FM3 My Sharona

    Did not know that but that is an absolutely fantastic piece of trivia!
  48. H

    References to "Preset doesn't sound like Promo-Video" topics?

    I second that. I'm done with auditioning hundreds of IR's. I just go with either TV Mix 7 or 2 and i'm happy.
  49. H

    FM3 My Sharona

    @yek Thanks! It was studio recorded. All tracked together (and later guitars were doubled) @maxx77 Yes only bass. Our guitarplayer is very attached to his 2 amp setup....(and I must say, it does sound FAT!)...Perhaps one day I can convince him that modelling is easier (on his back and in a...
  50. H

    FM3 My Sharona

    My band did a demo recording the other day. All bass recorded directly into the mixing desk with the FM3.
  51. H

    How do i change the placement of the effects on the FC6?

    You can edit the appropriate layout/view in FM3 edit
  52. H

    Favourite Amp models

    Corncob M50 for clean to mean!
  53. H

    Pop punk bass suggestions

    I just wanted to confirm that the sterling basses are fantastic. I prefer my Ray35 above my Bongo 5 My bass patches are all SVT based with a 1x15/4x10 IR. I add a dark glass drive for more snarl.
  54. H

    Scene block level

    That's what I thought. I wanted to confirm. Thanks guys!
  55. H

    Scene block level

    I don't have the unit with me so I can't test this. If I adjust the blocklevel (for example: the amp block level) in scene 1, does this change the blocklevel in scene 2, if this has the same amp channel? Or can I have seperate levels for the block in different scenes (without using any...
  56. H

    My "OMC9" setup

    @voes does
  57. H

    FM3 Future Updates and Support?

    IF support would stop right now (which it won't) we'd still have an amazing piece of useful equipment. The FM3 as it is now is the best I've ever had the pleasure of playing with.
  58. H

    Slipknot SPIT IT OUT humaniser effect in intro

    There is factory preset that is called Poltergeist Pig that does something similar. Give that a look
  59. H

    Help! Noise issue with new FM3

    😂
  60. H

    Help! Noise issue with new FM3

    ^^Less amplification of the interference. The interference is the same , but not as noticable. </Annoying pedantic mode>
  61. H

    Cygnus Question .......

    Ares sounded fine to me. Cygnus does too. For me it's not night and day. It's subtle, but I'd be happy with either if no updates were to come anymore.
  62. H

    Help! Noise issue with new FM3

    If it sounds like interference. Itight be just that. Did you try it in a different room/outlet? Are you near electrical appliances? ETA. Yes..sounds like electrical interference to me. Try another outlet or room. Or moving position. This might not be an FM3 issue
  63. H

    My "OMC9" setup

    That one got me too. Besides this I must say that I really like the MC6 editor. It's pretty intuitive
  64. H

    Secure FM3 to board

    That's right..it's m3.5 not m3
  65. H

    Secure FM3 to board

    I've bolted it to my temple board. I think it's M3 screws 12mm. Works perfectly (also for the mosky dual and mission pedal. And the MC6..but I used shorter screws.for that one)
  66. H

    Would the FM3 USB power this?

    It won't power anything
  67. H

    noisy footswitch?

    Does it happen when you use the buttons for anything else besides changing presets (changing scenes, changing effect states etc).
  68. H

    Best substitute for virtual capo?

    +1 for the Drop. I have it on my board and it works flawlessly.
  69. H

    Effect switching status in scenes.

    Scene revert on
  70. H

    FM3 Cygnus Factory Preset Banks A, B, and C - Preview 2

    Does using the "all banks" overwrite bank D? (I have my own dialed in presets in the 500 range of presets)
  71. H

    Have you found “your” amp in the FM3?

    I've really been digging the Cornfed M50 (discovered that due to a post on this forum)
  72. H

    Ping pong not ponging

    Is the output set to stereo or sum L+R/Copy L->R? (in FM3 Settings, not in the patch) If not set to stereo, then you wont get the ping pong effect
  73. H

    Parameters don't show up.

    We've all been there ;D
  74. H

    FM3 Future options?

    That's FM3-edit, not FM3.
  75. H

    No signal from 1/4" output jacks...?

    Did you route the signal to out2? Volume for out2 properly set?
  76. H

    CORNFED M50 (Cornford MK50 II), what an amp model!

    I tried this amp model for the first time because of this post. You are not wrong sir!
  77. H

    HX Stomp as backup to FM3

    I'm using an old Vox Tonelab LE...which sounds surpringly good (but some presets/amp sound surprisingly bad)
  78. H

    Different sound radiations with a real cab compared to a tube amp

    I'd go a step further and say that it's not just unlikely, but physically impossible (for the same reason Rex is saying). I do believe they sound different, but it just can't be a different 'sound radiation'
  79. H

    FM3 with other midi controllers

    MC6/MC8 is very powerfull too https://forum.fractalaudio.com/threads/my-omc9-setup.172031/
  80. H

    Volume pedal

    Yes
  81. H

    Fm3 + FC6 or MC6

    I prefer the MC6 for it's smaller footprint. I don't find the programming to be extremely complicated, but yes, it does require more setup than the FC6. You cán do a lot with the MC6 that the FM6 can (but not everything): https://forum.fractalaudio.com/threads/my-omc9-setup.172031/
  82. H

    Let's see those FM3 rigs!

    @sarge are you hearing string noise still? That drove me crazy untill I figured out that I was using such low output volume om my frfr (playing at home) that the processed sound was not completely "masking" the dry sound of the strings. Turned it up a notch and all was fine.
  83. H

    Let's see those FM3 rigs!

    Really? I'm 'feeling' it just the other way around. No latency (whatsoever) for the Drop, and some on the FM3. But hey: if it works for you: great! less pedals = better!
  84. H

    Fractal Audio - Amps

    Also, people might be reluctant clicking random links. I know I'm not clicking on it :p
  85. H

    Layout help, -select which layout from external midi?

    I put "Layout select with midi " on the wishlist a whole ago
  86. H

    Let's see those FM3 rigs!

    Small update. Added a Drop pedaal.
  87. H

    Synth Bass Patch for Loverboy's Take Me To The Top

    love it
  88. H

    Expression Pedal?

    I have the EP1. It does what it needs to do and it's build like a tank. Can't comment on the other ones.
  89. H

    My "OMC9" setup

    Glad it was helpful. I tried to copy the setup post to the first one, but it is not showing the images, only links to them. I'll see if i can fix that
  90. H

    Optimizing preset for lower CPU usage

    you can only have 1 pitch block. ETA: ingenious signal path! I like it.
  91. H

    I just took a factory preset from 78% CPU to 45%

    On the FM3, yes, in FM3 edit, no.
  92. H

    My "OMC9" setup

    See 0:35 in the video. Active scene is capitalized. When you select other scene, it will be capitalized, and the former active scene is returned to lower case.
  93. H

    My "OMC9" setup

    My setup: I have the FM1 receiving midi on channel 1 and the MC6 on channel 2. You may choose other channels, but be sure that they are two seperate channels, to prevent problems. The Control Changes # I am using are arbitrary too, you can choose other ones. Set these up on the FM3 under...
  94. H

    My "OMC9" setup

    I can, and I will. However, not every setting can be written in the configuration files. Write up is coming. working on it!
  95. H

    MIDI Question - two CC's sending a PC?

    If you setup the devices correctly, they can each receive midi info on seperate channels without problems. This is exactly why you have 16 midi channels available. To be able to 'talk to' different devices if you need to. To be clear: Setup the FM3 to RECEIVE midi on channel 1 and SEND out midi...
  96. H

    My "OMC9" setup

    FM3 is sending midi to the MC6, and the MC6 is sending midi to the FM3. Basically, I'm using the FM3 to change banks on the MC6 and using the MC6 to change presets/scenes/effects on the FM3. Additionally, there is some "internal switching" on the MC6, where pressing a footswitch will toggle some...
  97. H

    MIDI Question - two CC's sending a PC?

    are you sure you are not hitting 2 switches at the same time? Per default, hitting d+e or e+f together will call a preset on the second page of the bank you are in on the MC6 Also, do you have midi through enabled and are both devices on same midi channel? if so, that could cause unwanted...
  98. H

    In Praise of Dirty Shirley

    Which factory cab do you guys recommend?
  99. H

    My "OMC9" setup

    Thanks Yek, should be fixed now
  100. H

    Morningstar MC8 layout help with FM3

    Dont want to hijack this thread, but for anyone interested, I've made a seperate post about my setup here.
Back
Top Bottom