Search results for query: *

  1. Tubiflex

    Ok thanks, I will try the brit pack

    Ok thanks, I will try the brit pack
  2. Tubiflex

    Hello ML, I use an Axe 2. My preferred factorycab is nr 103 4x12 Basketweave TV mix. It is not...

    Hello ML, I use an Axe 2. My preferred factorycab is nr 103 4x12 Basketweave TV mix. It is not ultrares, can you tell me if its included in one of your newer cabpack in ultrares. ? maybe the brit collection ?
  3. Tubiflex

    Factory cab 103

    Thank you ! will investigate further
  4. Tubiflex

    Factory cab 103

    Is one of my favourites - is it possible to get it in ultrares ? I hope that someone can inform me, if it is from a specific cabpack
  5. Tubiflex

    Fuzz FX blocks and ... virtual 'buffering'?

    Great tip ! now my Bender Fuzz sounds much more like the real thing - I used 90k + cap
  6. Tubiflex

    Love for the USA Lead +

    USA lead BRT + with T808 mod in front, is one of my favourites.
  7. Tubiflex

    Pink Floyd - Terminal Frost (Guitar Cover)

    Very authentic sound and great playing ! Can you please tell which drive and cab you use, together with the Bludojai lead ?
  8. Tubiflex

    Axe FX Univibe vs. Fulltone MDV...

    I think resonance is in the advanced page - it is on the axe edit . I havent got my Ultra at home so I dont remember
  9. Tubiflex

    Axe FX Univibe vs. Fulltone MDV...

    try these settings : rate 1.505Hz, depht 6.77, res 2,4%, lfo Exp, freq start 212Hz, bulb 4.02, mix 58% I use this for a Robin Trower preset
  10. Tubiflex

    Anybody using Motor Drive?

    Nice to see, you have the same preferred setting as me .30 It gives a touch of colour without being too dominant.
  11. Tubiflex

    Stock vs commercial IR

    I have been thinking about buying one of these (14,20), would you recommend one over the other ? The stock ones I use the most, are based on greenbacks.
  12. Tubiflex

    Celestion G12K-85

    I like them a lot, and use 2 X K85 in combination with 2 V30, wich supplement each other very nice. The K85 has a even freq response with more bass and dosnt sound nasal/honky like the V30 can do
  13. Tubiflex

    Axe-Fx II "Quantum" Rev 2.00 Firmware Release

    The same combination that I use, but with a tubescreamer in front
  14. Tubiflex

    clean tones

    For funky clean, try USA clean, for fat I use double verb vib. Your choise of IR ´s are ofcourse also a very important factor, in colouring and shaping your tone
  15. Tubiflex

    Anyone Using Factory Cabs 54-57?

    I don`t use them either, it would be very nice with new ones :-)
  16. Tubiflex

    Add an EQ bock with wah? How?

    Great tip ! thank you. I always think the wah needs some more mid/lowmid, this is a fine way to acchive it
  17. Tubiflex

    Anybody else a fan of Cab #60 - 4x12 FAS GB M160?

    I totally agree, they have become my favourite cabs - 102 is also great :-)
  18. Tubiflex

    Please recommend me a cab-pack

    Thanks for your replies, 13 and 8 got a lot of thumbs up, think I´m gonna try those ones :-)
  19. Tubiflex

    Please recommend me a cab-pack

    I would like to expand my number of cabs, but dont know which cab-pack to buy. The ones i like the most now are: 54 (4x12 Mills) 60,61 (4x12 Fractal v 30) 101,102,103 (4x12 Basketwave mix) 131,132 (4x12) - Maybe I need the new cab-pack 14 or 8 ?
  20. Tubiflex

    Anyone own one of these? Powered cab

    effektpedaler.dk har forhandlingen af Mission i Dk og kan skaffe den til 15.800 kr - alt for dyrt for mig !
  21. Tubiflex

    Dynaflanger - Dweezil and Frank Zappa?

    The flanger and phaserblocks are active in the other scenes than 1
  22. Tubiflex

    XFRMR MATCH

    Thanks a lot for the link :-)
  23. Tubiflex

    XFRMR MATCH

    I just checked my Ultra (fw 11) - there is no XFRMR Match parameter !!
  24. Tubiflex

    XFRMR MATCH

    Thank you. I have one in the rehearsal room, that could need a twist on some of the presets to give it a more indirect compressed sound. It is incredible that i havent discovered that parameter before, while I use it a lot here at home on my Axe2.
  25. Tubiflex

    XFRMR MATCH

    Can someone clarify if the transformer match parameter is available on the Ultra ?
  26. Tubiflex

    Technical question about Hipower and tone frequency

    Very interesting information ! I would certainly like to try your patches
  27. Tubiflex

    Psychedelic rock band FREAK - first teaser (FW17, Plexi 100W, OH pre-rola)

    I like your vintage vibe ! please share your preset
  28. Tubiflex

    computer soundcard

    Ok - thank you for answers
  29. Tubiflex

    Axe change silent presets?

    Maybe there is a vol.block attached to a controller ? try to bypass either the cab or vol block
  30. Tubiflex

    computer soundcard

    Just bought an Axe2 after many years of playing an ultra:-) I would like to know, if it is possible to use my soundcard on the computer, while having the axe connected via usb, to get the bennefits of reamping etc. or do I have to use the axe as soundcard then ?
  31. Tubiflex

    Big thanks to G66

    big thumbs up for G66, they deliver the best service !
  32. Tubiflex

    Name Your DAW!

    Cubase 5
  33. Tubiflex

    songs recorded with Axe Ultra

    I like your compositions and guitar sound - the drums and bass sound as recorded with a overhead mike. Should have been close miked and louder.
  34. Tubiflex

    FX Presets - where are they?

    Here´s the one for Axe2 http://forum.fractalaudio.com/axe-fx-ii-preset-exchange/79617-mamas-back-again-ae-3-x-mother-all-pedal-effect-emulations-thread.html
  35. Tubiflex

    FX Presets - where are they?

    I think its this one you are looking for http://forum.fractalaudio.com/ultra-std-preset-exchange/34464-mother-all-pedal-effects-emulations-thread.html
  36. Tubiflex

    phaserblock has too much high freq

    I use an Ultra, is has no tone control ! that would be super nice to have
  37. Tubiflex

    phaserblock has too much high freq

    I love the phaser effect, but dont like the extra high freg it generates. I usually set an eq after to tame the metallic highs, but that is a little more complicated when i use it after the amp in stereo. How do you compensate for the extra highs ?
  38. Tubiflex

    Pete Thorn, Perplexed- Cover

    Yes -there is lots of ways, to get the same result on the Axe :-) I like to use the eq on the drive block, to find the sweet spot on the amp.
  39. Tubiflex

    Pete Thorn, Perplexed- Cover

    Why dont you use the output level of the driveblock as the boost, and/or the possibillity to use the eq of the drive, to boost only certain freq. ?
  40. Tubiflex

    Pete Thorn, Perplexed- Cover

    It sounds great ! How do you use the filter ?
  41. Tubiflex

    Reverse delay

    Thanks to your tip Bakerman, I have managed to get pretty close to the original (close enough for me:-) by using a vol. block with envelope attached - settings: threshold -60 db, attack:52ms, release:7.35ms, gain:2.56. after a fuzz block, before amp -dly-rev. To have long sustain in certain...
  42. Tubiflex

    Reverse delay

    Ok Ill try that at my next rehearsal - god koncert :-)
  43. Tubiflex

    Reverse delay

    Thanks for helping ! How did you set the parameters for that sound ?
  44. Tubiflex

    Reverse delay

    Could be, yes, but is it possible to emulate that sound ?
  45. Tubiflex

    Reverse delay

    Have been trying to copy the reverse delay Hackett use on the solo in Ripples (starts at 4:23) https://www.youtube.com/watch?v=gJa9gEUa0To I cant find the right combination of time, x-fade time and feedback. Right now I use time 4oo ms. x-fade 50ms and 10% f.back - but It dosnt sound right...
  46. Tubiflex

    Possible to Connect Fractal II Straight into Laptop for Recording?

    How much latency, when going direct ? I use a Ultra into a M-audio PCI 24/96 soundcard, and would love to have less latency.
  47. Tubiflex

    Can I use standard presets for the ultra?

    there are lots of presets ! try this post http://forum.fractalaudio.com/ultra-std-discussion/81937-axe-fx-ultra-presets.html#post994879
  48. Tubiflex

    Need to Save Anything? Moving from Standard to Axe-Fx II

    check this thread maybe you will face the same problems ! as I dont think it is possible to save 1.gen. Axe presets in the new axe-edit for 2nd gen. units http://forum.fractalaudio.com/axe-edit-general-discussion/81148-i-need-run-2-versions-axe-edit.html
  49. Tubiflex

    Need to Save Anything? Moving from Standard to Axe-Fx II

    No , they are not compatible. I think you have to write down the settings of youre favorite presets, before you sell the standard
  50. Tubiflex

    output balance

    Not on my amps ! the only way I can control the volume is on the axe
  51. Tubiflex

    output balance

    Is there a way to balance the level of the left and right outputs globally ? One of the effect returns of my amps are louder than the other, and it would be nice to be able to balance the output globally, instead of using the outputmixer on each preset.
  52. Tubiflex

    Boss DD-20

    I have a DD-20 preset from the forum
  53. Tubiflex

    need a bass-preset for guitar

    Thanks a lot for the tip :-) I will check them out
  54. Tubiflex

    need a bass-preset for guitar

    I have been doing forum searching on this topic, and did find some useful information, but most of the relevant (old) preset attachments are invalid ! But I will continue searching :-)
  55. Tubiflex

    need a bass-preset for guitar

    Could somebody help me with a nice preset for guitar to simulate a bass sound. I had a very good preset, which I unfortunately have lost ! Have tried myself with pitch/octave - eq- bassamp - basscab, but it does not sound as good.
  56. Tubiflex

    Small tip for the wah block, the tracking parameter

    Great information ! I have been playing around with too high track settings - now it sounds real ! Thanks :-)
  57. Tubiflex

    Gig with Ultra in Graz/Austria

    Thank you for sharing - I am very impressed ! You cover a lot of ground and master so many styles - Incredible
  58. Tubiflex

    New one with Ultra

    How du you record your Ultra ? Cabsims or real cab - if cabsim which one ?
  59. Tubiflex

    New one with Ultra

    Wow, absolutely incredible playing and great composition !! What is going on from 2:30 - 3:45, are you trigging a keyboardsound ?
  60. Tubiflex

    newer IR's with Ultra

    Yeah, I will buy the vintage pack next week. It is so nice, we have the possibillity to upgrade the tone of the ultra :-)
  61. Tubiflex

    newer IR's with Ultra

    I am also interested in buying one of those ownhammer packs ,to use mostly with clean fender amp models, so any recommedations would be nice. Vintage or Modern ?
  62. Tubiflex

    Ultra on Knopfler and Gilmour.

    Thanks a lot ! This is a great preset :-)
  63. Tubiflex

    El Capistan settings?

    Lfo1 : 2.567 Hz, 25.2 %, 130.4 deg. Lfo2 : 0.958hz, 22 %, 0 deg diffusion : 15 %, time 100 % after the delay there is a peq with a - 12 db at 172.3hz, q 5.0 and -5.67db at 3757 Hz,q 2.315 followed by a tape dist with med drive. This is from Don P.´s preset , hope this is enough information
  64. Tubiflex

    Ultra on Knopfler and Gilmour.

    Have been listening more to your YT playlist, and must say again that I,m very impressed by your and the bands playing ! Great singing by the way also Would you please share the Sultans preset ? I think you nail the sound(and playing) spot on.
  65. Tubiflex

    Ultra on Knopfler and Gilmour.

    Thanks a lot for the preset Muris - very kind of you ! It sounds great on my setup also :-) ( gui - ultra - two guitar amps) I wonder why you use a stereocab, as it becomes mono shortly after, when it hits the comp in the chain ? it also has a lower resolution ! Also there is a peq in the...
  66. Tubiflex

    Ultra on Knopfler and Gilmour.

    Really nice playing ! - do you mind sharing some of your presets ? I would expecially love to try the "Shine on" settings
  67. Tubiflex

    AFX II Leslie simulation

    hi PacoCasanovas Can you please upload your Rotary preset for Standard, as I have been strugling a long time to get good results, and still not satisfied, so I would be very happy to try your version.
  68. Tubiflex

    The time has come to have G2 AMP Modeling (TM) and MIMIC (TM) in the ULTRA/STANDARD ?

    I am also very satisfied with my Ultra. ! If I have problems with flubbyness , I normally set lo cut to 150hz or higher and lower Depth and/or Master. It would be fantastic though, If FAS would make a FW update with new algorithms for effects only, like Wah, Rotary and Reverb.(wich have been...
  69. Tubiflex

    Scandinavian Axe Vikings

    Hej Peter - god ide ! Jeg har længe tænkt på at kontakte andre danskere på dette forum, for at lave en dansk Axe-fx diskussionsgruppe. Jeg har iøvrigt en Ultra og er derfor ikke helt på bølgelængde, når der bliver udvekslet problemer og erfaringer omkring Axe2. Vi har jo alligevel mange...
  70. Tubiflex

    semi wish list ...but more user cabs?

    I am sure there won´t be any more updates for the Ultra. Why don´t you download the 2 new Cab packs, there must be some goodies to give your box new life. I will check them out myself soon.
  71. Tubiflex

    Ultra - do you have a "go to" cabinet and mic

    Great thread ! Clean - 2x12 Brit Crunch - 4x12 30 w Lead - 4x12 30 w, 4x12 Cali, all with no mic
  72. Tubiflex

    AFX Compression Tips (including the new 9.02 features)

    check this out : Compressor tips - Fractal Audio Systems Wiki
  73. Tubiflex

    Acid

    Very strange and funny sounds :-) I could personally use 8:40(clean), 9:00(flange), 9:52(short). Is there a chance that you will share those presets, or give an explanation on how you tweak to get there ?
  74. Tubiflex

    Project ST - demo TS

    Great - I liked it !
  75. Tubiflex

    "Old" effects preset files?

    It must be this thread you are thinking of http://forum.fractalaudio.com/ultra-std-preset-exchange/34464-mother-all-pedal-effects-emulations-thread.html
  76. Tubiflex

    Playing Pink Floyd with my band

    Please share your " Shine on your crazy diamond" preset. I am very impressed by your sound and technince !
  77. Tubiflex

    Ultra as mic pre

    In lack of money for a real microphone preamp, I am currently using the Tube Pre sim. My settings are pretty neutral (eq noon,drive 1.30,mstr 7.01) I think the result is okay, was just interested to hear if anyone gets better results with deeper tweaking of the parameters in the Tube Pre ? I...
  78. Tubiflex

    Stereo miking/ double miking

    Have got an idea on how to stereo mike my accoustic guitar or as two independant paths. I will route 2 condensor mikes through a mixer into effect return. Then make two rows, each with a signal path like : comp-tube preamp-graphic eq-rev-out1-DAW. Could then have the possibility to make either...
  79. Tubiflex

    The Most Powerful Advanced Amp Parameter...

    I read the manual and got information from there - thank you anyway - sometimes I forget how much information there is there and in the wiki, instead of just posting on the forum :-)
  80. Tubiflex

    The Most Powerful Advanced Amp Parameter...

    Ok ! Is that freq. response affected by how hard I drive the amp or is it "just" another freq. filter ? which there are lots of allready :-)
  81. Tubiflex

    The Most Powerful Advanced Amp Parameter...

    Are thre any connection with the transformer match feature from Axe 2 and the two parameters transformer lf and transformer hf of the Ultra ?
  82. Tubiflex

    Your typical wah settings?

    Another trick is to put a parametric eq in front of the wah and boost the freq you need, with auto engage like your wah, so it only function when you use the wah.
  83. Tubiflex

    Your typical wah settings?

    Try experimenting with the freq modifier, with the curve and mid % . that can give more midrange honk
  84. Tubiflex

    advanced settings

    Have you read this tread ? I use it a lot http://forum.fractalaudio.com/ultra-std-discussion/56116-%2A%2A%2Apower-amp-settings-depth-damp-sag%2A%2A%2A.html
  85. Tubiflex

    new rec

    I play a Gibson the paul, the rhythm guitar has a swelldelay with envelope on both time on delay and volume afterwards I have changed the link thank you ! Push is a great album !
  86. Tubiflex

    new rec

    I would like to have some feedback on this nr - about halfway the guitars starts ! http://soundcloud.com/tubiflex/signs-of-life
  87. Tubiflex

    What's your go-to amps for Clean, crunch, high gain?

    Clean: Brownface, 59 Bassguy. Crunch: Plexi 1, Wrecker 1. Lead: Plexi 1, Brit 800.
  88. Tubiflex

    Tone Matches for Standand/Ultra

    Thanks a lot Songtan13, for your match of the Port City Clean - Have made some minor adjusts and it has now become my new clean sound :-)
  89. Tubiflex

    Delay Ratio question

    OK ! To have a delayspread of 10ms in a 400ms setting, I must set ratio to 97.7 or 97.3 0.977*400= 390.8 gives 9.2ms and 0.973 gives 10.8 ms Thank you for the information :-)
  90. Tubiflex

    Delay Ratio question

    I would like to know what a change in ratio equals time in ms. I use a lot of stereo delay in my presets, and it would be easier for me to use ratio to make a f.ex 10 ms. spread, instead of setting up Dual delay blocks for that. I know I just can rely on my ears to know where the spread sounds...
  91. Tubiflex

    How to swell guitar volume, not necessarily Volume Block

    In the modifier-menu at the top, there is a parameter called source, where you have to choose exp1 or exp2. Also the curve must start at 0%, end at 100%
  92. Tubiflex

    Analog Delay

    My best results in trying to get an analog delay is, setting the highcut to max 4000hz, drive 5 and to set the delay in parallel with a tape dist. afterwards to warm up the tails.
  93. Tubiflex

    Slow-attack

    After half an hour of experimenting i finally settled on : 40.9 Thres, 111.5 Att, 9.13 Rel, 4 Gain. This reminds me of an effect i used to have (Zoom multifx)
  94. Tubiflex

    Slow-attack

    Thank you Yek ! I tried your, settings but needed a quicker/dramatic effect so I use : 41.3 Threshold, 133.7 Att, 40.39 Rel, 3.37 gain and Log30. It is not perfect - but getting nearer :-)
  95. Tubiflex

    Slow-attack

    I have made a slow-attack effect by using the Gate-block in the beginning of the row(thres-34.3/att10/hold136.1/rel12.43/ratio7.34) I am getting good results but are not able to elliminate the attack totally. I am sure it is possible to make that effect by using envelope modifier - but need...
  96. Tubiflex

    Redwirez question

    I forgot to tell you that its for use as direct recording, not through PA !
  97. Tubiflex

    Have we lost Mark Day's Ultra Patches forever?

    Wow !! I am looking forward to try these out :-)
  98. Tubiflex

    Redwirez question

    For clean its Brownface and USA clean, for Distorted I use Wrecker, Brit 800 and USA lead
  99. Tubiflex

    Redwirez question

    Please give me some guidance in which two Redwires to buy. I have read a lot positive stories about these cabs and would like to experiment, but are not ready to buy the big packet yet. I need one for clean sounds, where I now mostly use my Ultra´s 4x12 25w, and one for the dist. sounds...
  100. Tubiflex

    Usercab for Acoustic ?

    You are both right, I went in the wrong direction, i´m getting much better results without. Sometimes you are not able to see the forest because of all the trees :-) (a danish saying)
Back
Top Bottom