• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. D

    FC-6 - Setup, Tips & Tricks

    Wank killed me lol. Thank you so much for all the videos leon. Much success to you in the future.
  2. D

    Axe-Fx III Firmware Version 2.05

    I know this is kind of a long read but while Researching the Sunn Model T, I stumbled on one mans quest of modding his "generation 2" Sunn Model T. I thought might have some interesting mods ideas. There's also some history about the amp if people are interested...
  3. D

    Axe-Fx III Firmware Version 2.05

    Flawless install. Thank you Cliff and Co.
  4. D

    Some slide guitar

    Slide playing always looks easier than it is. lol. Great job Sir.
  5. D

    Waiting for FC-12

    Nothing but sincerity as far as the eye can see...
  6. D

    Axe-Fx III wait list: Let us know when you get notified...

    Looks like the list is done. You can get one for the waitlist price in the fractal store.
  7. D

    Jamming a fuzzy Band Commander with the EBMM St. Vincent

    Interesting how such drastic tone changes occur with minimal switching between the axe III and the guitar. If I'm assuming correctly by the state of the FC-12, it seems only a drive was flipped on between clean and dirty sections. Nevertheless, great demo of both products. Awesome job Mr. Carter.
  8. D

    Axe-Fx III Firmware Version 1.12

    Sorry you're having trouble. On my end the axe III downloaded and wrote in 2 different operations. Hope that helps.
  9. D

    Lots of String Noise with my Axe-Fx III

    Never hurts to try some different strings. Hope this helps.
  10. D

    TesseracT

    I thought they were using kempers now o_O http://www.aclekahney.com/kemper-sonder-profile-pack/
  11. D

    Wish Global Amp Speaker Parameters?

    While researching before I wrote the thread, I found that it has been asked for before in the Axe II wishlist few times but since the last thread is about 2 years old I figure it was worth another shot.
  12. D

    Wish Global Amp Speaker Parameters?

    I use a power amp and cab setup for the III and try to use Low Res parameters to help sync the amp sims better with my cab as per cliffs suggestions in the tech notes forum. I absolutely love the Axe III but while scrolling thru presets I need to reset these parameters over and over again and...
  13. D

    Looper in the Axe FXIII

    Loved doing some minus the bear type riffs with the half speed looper and once button on the II. Too bad its not in the III (yet ;)). Not the II or my video but just to give people an idea of the possibilities.
  14. D

    Axe FX III The New Cab Block

    Also, from the manual there is a Hidden Feature in the Cab block called Cab picker: Cab Picker – With the cab number field selected, press ENTER to show the Cab Picker. This lists all IRs in the current bank and makes it easy to scroll through the list to find what you are looking for. UltraRes...
  15. D

    All That Power

    :eek::eek::eek:!
  16. D

    Treble bleed caps - arghhh!

  17. D

    Power conditioner cables?

    http://btpa.com/FAS10-II.html
  18. D

    Using 2 guitar inputs (electric & Piezo) to 2 separate output

    Might be a little dated but hopefully helps.
  19. D

    Weird crackling sound

    Make sure your CPU usage isn't too high.
  20. D

    Joe Bonamassa Amp and Guitar Collection

    Pretty amazing collection. This must be what the storage room in Fractals new building looks like. :D
  21. D

    Harmonic transformer/ K-fuzz

    Tried messing with bit and sample rates in drive block?
  22. D

    Tuner accuracy and guitar set up

    I've heard that tuning with the neck pickup and guitar tone knob lowered helps with the jumpy nature.
  23. D

    At the Gates - Slaughter of the Soul cover, now with video. FW19 Diezel Herbert

    The tone was so close it was scary. Great job. One of my favorites.
  24. D

    Bug? Pops in cab preamp section FW 19-B3

    I hope I didn't just misread the release notes which could be the case. Cliff and Company already do so much I really would hate to waste their time.
  25. D

    Bug? Pops in cab preamp section FW 19-B3

    Thanks for all the responses guys, I dropped the preset down to just AMP and CAB which gave me about 30% CPU usage with the USB connected. Now, just scrolling back and forth with just the CAB block SAT parameter (NOT the PREAMP parameter) I still get this popping noise. Its actually enough of...
  26. D

    Bug? Pops in cab preamp section FW 19-B3

    Running an Axe fx MKI 19B3 Noticing pops when scrolling thru the PREAMP TYPE and SAT parameters within the CAB block. CPU is just below 80%. I have included a preset also. This could be user error but I thought it might be worth the post. Thanks for your time guys. *update* Does not happen...
  27. D

    Axe-Fx II Firmware 18.01 Released

    Ear Candy Cabs Buzzbomb?????? Never taught I'd see a fractal version of this cab in the Axe. Anyone know how this came about?
  28. D

    I don't say thank you enough...

    Lol, I went from a podxt to the axe ultra so I know what your talking about. Enjoy the ride man.
  29. D

    I don't say thank you enough...

    Was that all axe? Very nice.
  30. D

    How do I restart looper loop with single button press from middle of playback

    This used to be possible a few firmwares back when the ONCE feature operated like a Line 6 DL4 ONCE feature but was unfortunately altered for whatever reason. What I've been doing to get around this is setting two switches as the PLAY function but changing one of the switch types to Momentary...
  31. D

    MFC-101 Died...

    Thanks for the reply. God, i hope it's a fuse. I didn't try to open it just in case it voided some type of warranty. I just sent an email to them. Hopefully it won't have to go back.
  32. D

    MFC-101 Died...

    So, it stopped died in the middle of a gig and i can't seem to get it to start up at all. I've tried MIDI with phantom power from the Axe FX II, ethernet cable and plugging in straight the back of the unit. No results. It's probably close to 2 years old but i have never excessively damaged it in...
  33. D

    Circles

    Awesome! That acoustic tone is amazing too.
  34. D

    Looper Controls - How are you setting them up?

    Yes Sir! Not saying that the new way is bad at all, i can definitely see it's uses this way as well. I just had a few songs where i used it the old way. It was also nice if the end of the loop was slightly off, i could just keep tapping Once on the beat and it would sound fine. Still an amazing...
  35. D

    Looper Controls - How are you setting them up?

    I believe there was a section the MFC's release notes that stated that they're working on dedicated looper control mode in version 2.1 . The new looper is awesome i just hope in the future there's an option to change the Once control back to it's old behavior. I like that it reacted like a...
  36. D

    Looper Concerns

    Also, If your looper isn't picking up a certain effect, like for instance, the delay block or something. Try messing with the effects Balance control. That little trick took me like 20 mins to figure out lol.
  37. D

    Looper Concerns

    Haha, it actually does work well. The half time is awesome. I'm thinking it's just user error on my part. I was setting the "Undo" IA switch on the MFC to MOMNTRY rather than TOGGLE figuring it would be easier just to tap undo once and i would be able to stack again. TOGGLE seems to be working...
  38. D

    Looper Concerns

    Is there any way to have the "once" feature react the way it did in previous firmware? For example, if you hit "once" again it restarts the loop from the beginning. Also is anyone having issues with stacking and undoing? I can stack and undo fine once but if i try to stack again it doesn't...
  39. D

    Looper requests for Axe-FX II

    Sweet! Finally can play some minus the bear riffs :D Thank you Adam.
  40. D

    Looper requests for Axe-FX II

    Bummer. I was looking forward to this more than the tone/amp matching stuff believe it or not. But i'm sure everyone's working insanely hard at fractal right now so it's all good. Quick question, does the reworked looper have double speed as well as half speed? Sorry if this was previously...
  41. D

    Version 6.00 Preview

    Actually couldn't agree with you more. Can't wait to amp match my other guitar players Sunn model-T. If all goes well the look on his face is going to be priceless.
  42. D

    Version 6.00 Preview

    Sounds amazing! Your hard work does not go unappreciated fractal team. If the new looper stuff is on it then i vote this best firmware release ever.
  43. D

    So are there any improvements to the looper?

    http://forum.fractalaudio.com/axe-fx-ii-wish-list/46387-looper-poll-undo-stereo-5.html #43 from adam
  44. D

    Looper poll: Undo or Stereo?

    Don't let this fall off the first page! I've been really waiting for this update. Too bad it couldn't make 5.01 either but i know it's taking time because it's being done right.
  45. D

    Issues updating MCF-101 to current firmware. (stuck right now)

    No problem. Glad I could help.
  46. D

    Issues updating MCF-101 to current firmware. (stuck right now)

    Hey the same thing was happening to me using midiox with a midisport 2x2. I found this in another thread. Note on MIDI utilities: many MIDI utilities need to be configured to work "slowly" in order to perform a successful upgrade. For example, in MIDI-OX set Low Level I/O Buffers to 256 or 128...
  47. D

    Did the Axe II get new knobs?

    I believe cliff stated that they were changed because of a design issue.
  48. D

    New Looper block ??

    I always liked the DL4's version of the Half speed/Double speed feature. Wish that could be added. That being said I still can't wait for my II to come. Should be Amazing.
  49. D

    Axe-Fx II Technical Questions Thread

    Again, thanks for taking the time cliff. Quick question and sorry if it's off topic but in regards to the looper, are there any plans or is it even possible to model an 1/2 speed parameter with this feature? Thank again, can't wait to pick up the AXE II!
Top Bottom