• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. oldstar1975

    Axe-Fx Firmware Release Version 18.00 Public Beta

    Has anyone digged into new compressors? How they are?
  2. oldstar1975

    TOP 5 ROCK/METAL AMPS (free patches)

    Really impressed by 1959 preset! One question - that's the use to place the drive block after amp+cab? Sounds great though
  3. oldstar1975

    Fell in love with Treble Booster!

    Really love this drive! Mix - 75, master 7, drive 2-3, tone to noon - and almost every amp starts shining! Jus a little bit high end brilliance without loosing the low end of the amps! Love it!
  4. oldstar1975

    Axe-Fx III 16.00 Beta 12 "Cygnus" Firmware - Public Release Candidate

    can someone tell me - what will be the difference between beta 12 and official release? Just fixing final minor bugs or some amps algorithms will be changed too? Thanks!
  5. oldstar1975

    Axe-Fx III 16.00 Beta 12 "Cygnus" Firmware - Public Release Candidate

    Hi! One question - if I will install last beta, should I retweak all the presets again on the official FW?
  6. oldstar1975

    Axe-Fx III 16.00 Beta 5 "Cygnus" Firmware - Public Beta #2

    Just in case - after installing beta 5 should I reset all the amps. or It's ok only to listen the correct levels and overall sound, and the new biases will install automatically?
  7. oldstar1975

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    Great sound! Share preset please?
  8. oldstar1975

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    Just tried new firmware on my Matrix amplification! Wow! I've never get this real amp feeling before, amazing changes! But found one possible bug - I can't set the "preset" tempo, as before, unit always gets tempo from midi source. May be I forgot the right way to do it..
  9. oldstar1975

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    May be I doing something wrong, but when I switch to another amp and back BMT resets to noon...
  10. oldstar1975

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    wiki - As an user you don't need to do anything, UNLESS the firmware release notes instruct otherwise.
  11. oldstar1975

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    About resetting the amps... I have at least 500 presets, some commercial packs and my own presets. Each one have more than 1 amp, usually 5-6. In general - 2500-3000 amps to reset? Is it really necessary?
  12. oldstar1975

    Cygnus Beta - first impressions

    FFFFFF5555555!!!
  13. oldstar1975

    Cygnus Beta - first impressions

    F5, F5, F5, F5!!!!
  14. oldstar1975

    Cygnus Beta - first impressions

    Yes, It's Friday!!!
  15. oldstar1975

    Axe-Fx III Firmware Release Version 15.00

    Thanks! Just discovered! Solved!
  16. oldstar1975

    Axe-Fx III Firmware Release Version 15.00

    Axe edit have some bugs on the new FW. Am I the only one who have them?
  17. oldstar1975

    AFIII Presets Axe-FX III AustinBuddy's 1400+ Naked Amps TonePack - Cygnus 17.02+ Bank 1 Partial Update now available, Bank 2 coming in early 2022

    I like updated bank very much! Something really changed, spent two hours on Marshalls, happy! Thank you!! Wait for the next banks!
  18. oldstar1975

    AFIII Presets Axe-FX III AustinBuddy 1000+ LIVEGOLD TonePack for Cygnus fw17.01+ Update Now Available!

    yes, I can do it. Actually - am I the only one who wants feels some lake of high reqs?
  19. oldstar1975

    AFIII Presets Axe-FX III AustinBuddy 1000+ LIVEGOLD TonePack for Cygnus fw17.01+ Update Now Available!

    Hi! I'm listening the pack via studio monitors Alesis M1Active, and almost at all presets I want to raise up a little 4HZ to get the sound more open. I using in ear monitors on stage at regular volume. not braincrushing, and I'm afraid that the sound will be dark a little, what are you thinking...
  20. oldstar1975

    Mesa Recto BADLANDER

    Share the preset if you win please! I'll try too, the sound really impressed me!
  21. oldstar1975

    Mesa Recto BADLANDER

    amazing sound!
  22. oldstar1975

    Axe-Fx III Firmware Release Version 14.01

    Hello to everyone! Which cabs will fit the best for the new Archean amps? Clean especially...
  23. oldstar1975

    Axe-Fx III Firmware Release Version 12.08

    Yes, I already discovered it. It started only on 12.08. But in the another preset the same trouble fixed only by deleting one of the Cab blocks (one of the AustinBuddy's 1000+ presets).
  24. oldstar1975

    Axe-Fx III Firmware Release Version 12.08

    If click like this happens during the show, It would be serious problem for my soundman. I'm playing more than 10 years on Axes, and I'm pretty sure - it is a bug. Update - I can fix the problem in every particular preset there the click appears. In one case (on the screenshot) I sat the...
  25. oldstar1975

    Axe-Fx III Firmware Release Version 12.08

    Can you check this one? https://www.dropbox.com/s/sz390yicdfwgxpg/click 2.m4a?dl=0 Now it is really loud pop click, Im sure it is a bug.
  26. oldstar1975

    Axe-Fx III Firmware Release Version 12.08

    I've changed more then 300 scenes that day, but only one preset had that high click. I never heard it before. If it normal - ok then.
  27. oldstar1975

    Axe-Fx III Firmware Release Version 12.08

    Possible bug! Then I changing scenes on the front panel some presets clicking! File included. https://www.dropbox.com/s/iveskhpcxxpf2ih/click%20soumd.m4a?dl=0 (don't know how to attach the file directly)
  28. oldstar1975

    Axe-Fx III Firmware Release Version 12.08 Public Beta

    Just found the bug, but don't know - is it current version bug, or general. My Axe connected to iMac via USB and then I switch on the Axe, iMac changing the sound device to it, but after that all the processes stucked - Garage Band, YouTube - all the application not working. Only one thing helps...
  29. oldstar1975

    How to record guitar with backing track at the same time?

    yes, that's the way... But such powerful tool as Axe III definitely must do it much easier, as I think
  30. oldstar1975

    How to record guitar with backing track at the same time?

    Just tried, but I can't put the youtube sound to the Logic, USB input block does nothing, no any sound from it. Its strange, cause I can hear the youtube sound via Axe, and it going to output 1.
  31. oldstar1975

    How to record guitar with backing track at the same time?

    yes, you right. But for example - making a stream or video using QuickTime Player, it can use the Axe sound. But only a guitar, not drums for example.
  32. oldstar1975

    How to record guitar with backing track at the same time?

    Hi everyone! I'm jamming with youtube backing tracks, is it possible to record the whole session - guitar AND backing track? Right now I have only guitar recorded. Thanks!
  33. oldstar1975

    Axe-Fx III Firmware Release Version 12.07

    Then I selecting the studio compressor on default settings (Auto Attack/Release on) I must set the master level about 10 to compensate volume drop, is it ok? Sounds damn good!
  34. oldstar1975

    Can I use FC and midi PC and CC at the same time?

    For all who interested - new setup works well!
  35. oldstar1975

    Wish : Scene Volume Incr/Decr controls

    Yes, I want this option too!
  36. oldstar1975

    Post Your FC-12 and FC-6 Pedalboards Here

    Guys, how do you fixing the FC inside the pedalboard box? Removing factory screws for example?
  37. oldstar1975

    Can I use FC and midi PC and CC at the same time?

    Then I played on AXE II, my MFC was connected via Ethernet, and AXE was connected to keyboard sequencer via midi also. I had a tempo, PC, CC from the keys, and at the same time i was able to send the PC and CC from MFC. It was very good setup. Does someone use the FC and AXE III same way now? Is...
  38. oldstar1975

    Axe-Fx III Firmware Version 6.04

    I thought that the choice between the preset and global tempo is exactly for that situation - sequencer tempo is global, and the preset - local inside the preset for some needs.
  39. oldstar1975

    Axe-Fx III Firmware Version 6.04

    I can't set the tempo to "preset". No matter that I sat - "preset" or "global", the actual tempo is always from midi sequencer.
  40. oldstar1975

    Axe-Fx III Firmware Version 6.01

    No, I have non beta version. Will wait for update!
  41. oldstar1975

    Axe-Fx III Firmware Version 6.01

    Then I tried to do it I got only Controller menu
  42. oldstar1975

    Axe-Fx III Firmware Version 6.01

    I can't add parameters to Performance pages via my Mac Book. Nothing happens. Waiting for the Axe Edit update :(
  43. oldstar1975

    AFIII Presets Axe-FX III AustinBuddy's 1400+ Naked Amps TonePack - Cygnus 17.02+ Bank 1 Partial Update now available, Bank 2 coming in early 2022

    InEar monitoring, FRFR. And I'm listening on soundcheck to the sound from PA.
  44. oldstar1975

    AFIII Presets Axe-FX III AustinBuddy's 1400+ Naked Amps TonePack - Cygnus 17.02+ Bank 1 Partial Update now available, Bank 2 coming in early 2022

    Hi to everyone! Usually I tweak more High Freqs in my presets than I hear in Naked Amps, I know I must listen them on high volume, but in particular my band conditions my soundman agrees with me - for our live setup Naked Amps mostly a little darker than needed. Is there some universal way...
  45. oldstar1975

    AFIII Presets Axe-FX III AustinBuddy's 1400+ Naked Amps TonePack - Cygnus 17.02+ Bank 1 Partial Update now available, Bank 2 coming in early 2022

    Hi! After update I discovered that some presets, all Rectos for example, has a lot of gain now, definitely too much, causing low frequencies feedback even on low volumes. That I'm missing?
  46. oldstar1975

    Shout Out to " Burgs " ..... " Vox in Blocks Preset " is GOLD !!!!!

    Perfect preset, just tried, and all the scenes are good! Thanks!
  47. oldstar1975

    Axe-Fx III Firmware Version 3.02 Public Beta

    Thanks for the Tuner!!
  48. oldstar1975

    Implemented Tuner on Multiple (ALL) Inputs

    I asked about it before too!
  49. oldstar1975

    Axe-Fx III Firmware Version 2.03

    Thank you! You find the bug so fast, incredible!
  50. oldstar1975

    Axe-Fx III Firmware Version 2.03

    I have a bug. Then I selecting one of my presets by the front panel, the unit getting frozen. Only reboot helps. I have two presets which always stucking the Axe. upd. Moved back to 2.02, everything is all right now.
  51. oldstar1975

    Axe-Fx III Firmware Version 2.03

    yes. of cause, please forgive me for my bad English. I rebooted and replugged all the devices, and problem stayed the same. Then I closed browser on Mac and rebooted again, problem solved. I hope it was youtube page with background video.. mottling more ideas
  52. oldstar1975

    Axe-Fx III Firmware Version 2.03

    My MacBook Pro didn't working right after upgrade to 2.03. USB level -7 db, no sound at all. First 10 minutes there was no problems, after that sound disappeared. Then I choose internal dynamics I hear the sound normally, then switching back to Axe - silent.
  53. oldstar1975

    AFIII Presets Axe-FX III AustinBuddy's 1400+ Naked Amps TonePack - Cygnus 17.02+ Bank 1 Partial Update now available, Bank 2 coming in early 2022

    Hi! That about new firmware with new Speaker Compliance parameter? Will the pack be updated? Should we set it to 50 percent?
  54. oldstar1975

    global input 2 not syncing - bug?

    Just discovered that I can't link all the input2 block across all the presets via Global Bloc function. Then I set it to "global 1" for example, after touching some buttons in one linked preset there is nothing changing in the another.
  55. oldstar1975

    Axe-Fx III Firmware 1.19 Public Beta

    may be I doing something wrong, but I feel the same latency as before...
  56. oldstar1975

    Fixed Can't copy amp channel from one preset to another

    Thank you, will check tomorrow before the gig!
  57. oldstar1975

    AXE III cab managing

    Thank you very much, I understood the ideas!
  58. oldstar1975

    AXE III cab managing

    Hello! I want to ask - how do you guys managing cabs in Axe III? I mean that there are a lot of them, and if I will use the Axe Edit in the Cab Block it takes a lot of time to check for example 20-30 impulses, I must do the same clicks time after time.. I can use front panel and list the cabs...
  59. oldstar1975

    Fixed Can't copy amp channel from one preset to another

    No, it is still not working correctly.
  60. oldstar1975

    Fixed Can't copy amp channel from one preset to another

    When I trying to copy to clipboard channel B of amp block for example, switch to different preset and paste to channel B, all another channels of destination amp block replacing by wrong settings, Bassman mostly.
  61. oldstar1975

    Axe-Fx III Noise

    I decided to use inputs 1 and 2, and use two cables in two guitars for the repetitions to cut the noise. On the stage I just roll of the volume of the guitar and switch to another.
  62. oldstar1975

    Axe-Fx III Noise

    Thank you. I'm configuration the setup to use two wireless systems, so I need to use at least two inputs in the grid. nd I hear that input 23 sound with wireless receiver better then 1. Is it possible? Which way to connect wireless is the best? And I must keep in mind, that then I play wired to...
  63. oldstar1975

    Axe-Fx III Noise

    next question - I see the noticeable difference between inputs. Input 1 have less noise, Input 3 is a little more, and input 2 MUCH more. I must set the threshold about -35 to cut it. No cables, just cell amp and empty input jacks. Is it normal?
  64. oldstar1975

    Wish To have the "all" option in the tuner source menu.

    I have two guitars plugged in input 1 and 2, it would be good to tune them then I need without changing input source in tuner!
  65. oldstar1975

    Axe-Fx III Noise

    Hi to everyone! I want to ask you - How noisy your unit is? I mean that I usually setting threshold for middle to hi gain amps about noon in the input block, but in the previous Axe XL+ it was noticeable not so high, I sat the input gate about -60-70 db. Actually it sound normal, gate not...
  66. oldstar1975

    New Product Announcement! MFC-EDIT

    which mode you are using on MFC? "None", not "Axe fx"?
  67. oldstar1975

    Axe-Fx III USB Firmware Version 1.06

    Update. Didn't installed the driver (there is no driver for mac, isn't it?) Axe Edit, Fractal Bot work well, but only till I launch Logic. They can't work together.
  68. oldstar1975

    New Product Announcement! MFC-EDIT

    First of all - thanks for the scenes grouping, it works fin now. About initial IA states - I've studied the manual at page 22, understood the conception, but then I setting the buttons on the PRESETS and EX DEVS page to green and sent the result to MFC nothing happens, buttons still black. May...
  69. oldstar1975

    New Product Announcement! MFC-EDIT

    Thanks, I will try!
  70. oldstar1975

    New Product Announcement! MFC-EDIT

    MFC-Edit. Actually may be I;m stupid, but still don't understand how I can make drive switch led green if it used in the preset. I can't switch it of by only one tap, cause it sends the @on@command first, then off...
  71. oldstar1975

    New Product Announcement! MFC-EDIT

    may I ask you to give me the link to manual about it?
  72. oldstar1975

    Tremolo in tempo. Solved!

    I've read the manual :) You can synchronize various LFOs together by setting their RATE knobs fully counterclockwise to “LFO1 SYNC” and then syncing the LFO1 Controller to the Tempo just did it and set the tempo of LFO to 1/16 for my tremolo. And started it by envelope.
  73. oldstar1975

    Tremolo in tempo. Solved!

    Problem solved!
  74. oldstar1975

    Tremolo in tempo. Solved!

    Yes. I did. Take a look: From Cliff: Set the Rate to LFO1 SYNC. Then attach a modifier to LFO1 Type(Run). can someone edit this patch adding the suggested settings ? Explanation: Try this go to the trem block, turn the rate all the way down (this will change it to LFO sync -this will not show up...
  75. oldstar1975

    Tremolo in tempo. Solved!

    Hi to everyone! How I can set tremolo to the tempo right? At AXE II there was LFO controller which did it perfectly, but in III it have been changed and now I stuck in it... Any ideas? Thanks!
  76. oldstar1975

    Axe-Fx III USB Firmware Version 1.06

    my brand new Axe III don't connecting to Fractal Bot and Axe Edit III. but works normally with ma iMac (with Logic, etc). That's the problem? Help please!
  77. oldstar1975

    New Product Announcement! MFC-EDIT

    just bought. and have some questions. I using it in general midi mode, if I have the preset with delay and chorus, is it possible to load the preset with green lights on "chorus" and "delay" switches? And if i have 5 stitches for scenes 1-5, how I can make them green only then I stay in this...
  78. oldstar1975

    Using two guitars for live show

    Yes, I used the same method with Axe II. But in this case I need to change input source in amp from sum L-R to Left or right only. In other case there will be some lack of gain.
  79. oldstar1975

    Using two guitars for live show

    what if I use both guitars during all the show. different tuning for example? 50/50 percent? How I can use them one by one without unplugging cables?
  80. oldstar1975

    Using two guitars for live show

    two questions about it. 1. In this setup one guitar must be muted to not interference to the main guitar? Or I can play on guitar 1 on the preset created for guitar one only? 2. If I need change guitar cause the brocken string for example and play farther - how I can do it without changing the...
  81. oldstar1975

    Using two guitars for live show

    Hi! I looking for simple way to use 2 guitars with Axe III (not at the same time) during the live show. I have two wireless systems, for both guitars. And I don't want to switch off the body packs, pull off the jacks and so on.. How do you guys doing it? Thanks!
  82. oldstar1975

    Looper and scenes managing

    Hi to everyone! I trying to find the right solution to use looper live with MFC. I have one preset with looper block at the end of the chain, and several scenes which I want switch during the playing. The problem is - then I in the looper mode, my default scenes +/- IA switches not working. I...
  83. oldstar1975

    MFC and Axe III

    ok, thanks!
  84. oldstar1975

    MFC and Axe III

    I want to ask - do the Fractal has the plans to realise normal (not midi) connection between MFC-101 and Axe III?
Top Bottom