• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. m lebofsky

    Anyone only use one IR?

    Me too. Do you guys use any hi-cut / low-cut? If so , what values work for you in general?
  2. m lebofsky

    Amp in the Room?

    My comment has nothing to do with gain enhancer
  3. m lebofsky

    Most "in the room" FRFR solution

    Or Xitone solutions
  4. m lebofsky

    Most "in the room" FRFR solution

    Don't use an IR with your FRFR .... A filter to roll of the highs and some eqing to mimic a cab and your done....
  5. m lebofsky

    Amp in the Room?

    Yes. I do not disagree with anything you said, but I was wondering what Cliff's thoughts are 2 years later.
  6. m lebofsky

    Amp in the Room?

    Cliff, After two years and multiple major updates, would you have any suggestions/changes to your original post?
  7. m lebofsky

    Sad news

    Sorry....
  8. m lebofsky

    FS Axe III, FC12, Mission Engineering pedal, cases, cables.

    1) Fractal AXE III in Gator 3u soft case New: $2100 + $130 2) FC-12. New: $700 3) Mission Engineering expression pedal New: $150 4) Soft case for FC-12 and pedal New: $100 5) XLR cables for all the above (2 long for PA, 1 shorter for FC12) New: $75 Total New: $3,255 $2,600 plus shipping All...
  9. m lebofsky

    Axe-Fx III Waitlist

    Anyone waiting live near Denver, CO?
  10. m lebofsky

    Celestion F12-X200 floor wedge designs

    2 active Xitone wedges that I love.
  11. m lebofsky

    Plexi 50W 6CA7: Killer factory cabs

    Does the bright switch have different hi freq boost curves for each modeled amp? Wonder what it is for this amp model?
  12. m lebofsky

    Plexi 50W 6CA7: Killer factory cabs

    I assume you have the ideal bright switch on?
  13. m lebofsky

    New USB driver for Windows

    Yes. Windows gave me a message to unplug my USB device and replug it in to complete the process.
  14. m lebofsky

    New USB driver for Windows

    Installed fine here. Axe edit works fine. Windows 10.
  15. m lebofsky

    Plexi 50W 6CA7: Killer factory cabs

    Leon's LT TV Mix 2 for me (although not factory) ...
  16. m lebofsky

    Will we get the 50w Plexi 6CA7

    Axe III owner here, and it is my favorite amp. Playing mostly Black Crowes/Southern Rock stuff lately ...
  17. m lebofsky

    Axe-Edit III 1.06.11

    Wasn't suggesting "all", just a few :)
  18. m lebofsky

    Axe-Edit III 1.06.11

    This is leveling within a single preset, not between different presents, correct? It would be amazing to see multiple presets relative to each other ...
  19. m lebofsky

    FS Question on valuing a guitar

    Thanks
  20. m lebofsky

    Thinking about getting an acoustic.

    Love my Ovation into the Axe/FRFR, many compliments. Acoustically, average.
  21. m lebofsky

    FS Question on valuing a guitar

    I have a mint 'Gibson Custom Shop 1959 LP Reissue in the Brock Burst finish and Factory Bigsby. Manufactured in 2005. It was part of a run of 10 59's for Dave Carpenter of Guitar Sale back in 05'. What's the best way to value this guitar?
  22. m lebofsky

    Beyerdynamic DT770, DT880, DT990 Headphones with the Axe FXIII

    I purchased the DT1990 and compared them to my DT770. I am keeping the DT1990s since I can hear things in the mids that I couldn't hear on the 770s. Spent the weekend A/B ing .Much nicer headphones. Also - For those of you that don't care for the Beyer Dynamics treble spike, suggest looking at...
  23. m lebofsky

    Am I Crazy? (Implicit Reverb)

    Check your cab room level. I had a couple of presets that were unexpectedly not 0%.
  24. m lebofsky

    Beyerdynamic DT770, DT880, DT990 Headphones with the Axe FXIII

    Has anyone here directly compared the DT1990 to the DT880?
  25. m lebofsky

    DT1990 - Straight into the AXE III or do you use a headphone amp?

    DT1990 - Straight into the AXE III or do you use a headphone amp?
  26. m lebofsky

    Beyerdynamic DT770, DT880, DT990 Headphones with the Axe FXIII

    Interesting. I have the DT770 PROs (80ohm). Love them. In comparing the data you presented to https://diyaudioheaven.wordpress.com/headphones/measurements/ , the results are very similar.
  27. m lebofsky

    JTM50

    Has anyone developed a preset yet that nails it?
  28. m lebofsky

    Does storing/hanging a guitar from a wall hanger damage?

    My only concern would be sun fade (assuming windows in the room and years of sunlight).
  29. m lebofsky

    What is your favorite beer?

  30. m lebofsky

    What's your hobby?

    Motocross
  31. m lebofsky

    Typical 13 year old's bedroom setup, circa 1996

    Peavey Bandit and a Metal Zone pedal were my upbringings ...
  32. m lebofsky

    Black Crowes cover band preset

    Before the Axe and before my research I simply used the Blue channel of my Bogner XTC.
  33. m lebofsky

    Black Crowes cover band preset

    To get others' opinions and experiences.
  34. m lebofsky

    Black Crowes cover band preset

    Based on my readings about the band, I thought for sure a Silver Jubilee would be the got to amp ...
  35. m lebofsky

    Black Crowes cover band preset

    If you were to design one preset to use in a Black Crowes cover band, what would it look like? What amp block, cab, etc? I realize they used a lot of varying equipment over the years ... Thanks,
  36. m lebofsky

    Axe-Fx III Firmware Release Version 12.13

    Or make the homepage user defineable.
  37. m lebofsky

    Axe-Fx III Firmware Release Version 12.12

    +1 +2 if custom naming of the values were allowed (paul, strat, etc)
  38. m lebofsky

    Axe-Fx III Firmware Release Version 12.12

    Perfect. I didn't realize this!
  39. m lebofsky

    Axe-Fx III Firmware Release Version 12.12

    Added Input 1 Gain parameter to Setup->I/O->Input menu. This allows trimming the Input 1 gain to adjust for variations in guitar output level without having to adjust each preset. Would it be possible (in the future) for this feature to be utilized via the Global Performance Screen on the Axe?
  40. m lebofsky

    FracTool - ultimate multitool for FAS devices

    Absolutely.
  41. m lebofsky

    FracTool - ultimate multitool for FAS devices

    rebooted pc and axe twice ..... no go .....
  42. m lebofsky

    FracTool - ultimate multitool for FAS devices

    Trying to set my cab low cut across all my presets. I am getting the attached error. Any suggestions?
  43. m lebofsky

    Compressor settings

    There was a recent thread where people were comparing compressor settings and many came to agreement on the same basic settings, but for the life of me I can't find it. Anyone?
  44. m lebofsky

    Song with Princeton & Matchless amps

    OMG the vocals!!!!
  45. m lebofsky

    Input USB block

    Many great "flexibility" ideas here. My wish has been expanded upon. If we must start somewhere - It would be useful for the "Input USB block" to have a channel selection drop down rather than the current fixed 7/8 value.
  46. m lebofsky

    Input USB block

    NICE
  47. m lebofsky

    Input USB block

    It would be useful for the "Input USB block" to have a channel selection drop down rather than the current fixed 7/8 value. Yes?
  48. m lebofsky

    Experiences with Peterson Strobe Tuners

    When I used to use pedals, it was great!
  49. m lebofsky

    Favourite Amp models

    Sort of like a "What's your favorite color"? Even my favorite color changes depending on my mood ...
  50. m lebofsky

    Noise Reducer Gate - Wow!

    Others using a threshold of 0 ?
  51. m lebofsky

    Axe-Fx III Firmware Release Version 12.08 Public Beta

    Absolutely. I have requested this myself ...
  52. m lebofsky

    Drive A/B comparison

    Wondering if the amps are oversampled while the drives are not....
  53. m lebofsky

    Headphones ohms

    Beyerdynamic DT 770Pro 80 Ohm. Prefect.
  54. m lebofsky

    Describing Sounds

    BROWN NOTE
  55. m lebofsky

    Describing Sounds

    HAUNTING MIDS
  56. m lebofsky

    Help me WAH

    The discussion was centered on the wah increasing levels and various ways to tame it, which led me down the path of having the wah before the compressor.
  57. m lebofsky

    Help me WAH

    I'm surprised I don't see more people setting up their grids (or any factory presets) with the wah before the compressor. This obviously applies to more than the AX8. Discussion on this topic may be helpful ...
  58. m lebofsky

    Drive Block "Low Cut" tone control

    Perhaps a selectable "pro" mode should be implemented. No markings of any kind on any knob.
  59. m lebofsky

    Drive Block "Low Cut" tone control

    No Hz display for you!
  60. m lebofsky

    Axe-Fx III Firmware Release Version 12.07

    Agreed, but I thought that's what makeup gain switch was supposed to do (remove the need to manually apply makeup gain) ...
  61. m lebofsky

    Axe-Fx III Firmware Release Version 12.07

    I always have makeup gain ON, but I still find myself needing to have the compressor block's output level 2-6db
  62. m lebofsky

    Axe-Edit III 1.05.10

    Refresh fixed it....
  63. m lebofsky

    Axe-Edit III 1.05.10

    Doing a refresh after new FW to see if that fixes things ...
  64. m lebofsky

    Axe-Edit III 1.05.10

    Potential problema: 12.07 firmware with 1.05.10 editor = extremely slow ... FC plugged or unplugged doesn't change this.
  65. m lebofsky

    60 Quadrillion sounds in a single preset

    I think you're gong to need a bigger CPU.
  66. m lebofsky

    Mixer is not an effect block?

    Perfect. THANKS!
  67. m lebofsky

    Mixer is not an effect block?

    I would like to select channels of the mixer block via an FC switch; however, the mixer block is not listed as an effect to be chosen in Axe-Edit's FC Controllers TAP or HOLD settings.. Is this by design?
  68. m lebofsky

    Axe-Fx III - upside down

    Stranger Things. There are a lot of similarities here. Tubes/Axe = The World/The Upside Down Cliff=Axe , Eleven=The Upside Down Therefore Cliff=Eleven ??
  69. m lebofsky

    Axe-Fx III Firmware Release Version 12.05

    Looking forward to 12.06 FC updates!
  70. m lebofsky

    The Tri-Chorus sound

    The default mix for the Stereo Tri-Chorus is 100%, while every other chorus is 50%. In fact, the mix on this particular chorus acts differently ... Can any one explain?
  71. m lebofsky

    LT Presets

    Do you have these posted for the Axe III also ?
  72. m lebofsky

    Who sold a Bogner Ecstasy amp for Axe Fx II?

    Old thread, but doing it today ….
  73. m lebofsky

    FS Bogner 20th Anniversary XTC and matching 2x12 cabinet

    Located in Denver, pick-up would be ideal …. Comes with soft covers.
  74. m lebofsky

    Axe-Fx III Firmware Release Version 12.03

    Under 12.03, should the Axe pass USB out the headphone jack without a USB input block?
  75. m lebofsky

    Octave Distortion Block Sustain

    I just tried it also. Seems to let the Drive block keep driving longer rather than dying out quickly.
  76. m lebofsky

    Octave Distortion Block Sustain

    I'm on the road today/tonight. Let me know if it works! Obviously not perfect, but perhaps it will suffice for now without having to get additional blocks involved..
  77. m lebofsky

    Octave Distortion Block Sustain

    Would the Drive block's graphic EQ set to pre allow for an input boost and then lower the same block's Level to compensate? There's 12dB available ...
  78. m lebofsky

    Clavinet/Wah Up On Cripple Creek Patch Possible?

    May have found a bug. Speaker Imp curve setting shows Resistive Load, but graph is obviously from an IR not a flat line resistive load ...
  79. m lebofsky

    Wish Looper enhancements

    Dr, Another thought would be for the FC record switch to blink when it is armed, but not recording (i.e., recording threshold is set but not reached).
  80. m lebofsky

    Wish: Looper record armed (threshold set) - blink LED ring

    Looper block configured to use the threshold to start recording. It would be great if the LED ring would blink when not recording, yet armed. Once the threshold is exceeded, then recording starts and the LED ring turns solid. Great visual so you can know if you are actually recording or not.
  81. m lebofsky

    History of The Beatles Amplifiers

    Maybe I'll understand some of these references when I'm sixty-four.
  82. m lebofsky

    History of The Beatles Amplifiers

    All you need is love. And amps.
  83. m lebofsky

    Univox Super Fuzz

    Tries, but couldn't nail it. Has anyone successfully pulled this off? I'm working up a Cramps set (Poison Ivy) and she used a Univox Superfuzz ...
  84. m lebofsky

    Axe-Fx III Firmware Release Version 12.03

    Yes. Now update the firmware using Fractal-Bot. The AXE is waiting for you ….
  85. m lebofsky

    Assigning a "Solo" switch that adjusts things while remaining on the current scene

    That's what I was afraid of... I was trying to get away from having a clean solo switch, a blue solo switch and a red solo switch
  86. m lebofsky

    Assigning a "Solo" switch that adjusts things while remaining on the current scene

    FC12 Example: Layout 7 top row are presets Layout 7 bottom row are scenes: CLEAN, BLUE, RED. Each scene calls up varying channels and bypass states of amps, effects, etc of the current preset. I would like to assign a switch a latched "SOLO" switch that doesn't change the current scene, but...
  87. m lebofsky

    Axe-Fx III Firmware Release Version 12.03

    Is it just me or are harmonics popping out more?
  88. m lebofsky

    Scene select activating the "saved scene"

    FC12 Given: Layout 7 top row = presets, with one switch that gets me to Layout 8 Layout 7 bottom row= scenes Layout 8 = effect switches, with one switch that gets me back to Layout 7 Scenario: On layout 7, I select a preset, and then select a scene Then goto layout 8 and select a few effects...
  89. m lebofsky

    FC HOLD sticky function

    User error on my part. It was a momentary vs latching Reveal HOLD that was messing me up ...
  90. m lebofsky

    Preset 208 highest I can get to via bank up/down

    I ran into this yesterday. On Axe-Edit, look at your Bank+1 switch. There are a few thing to set: Wrap, Lower limit, Upper limit. For a bank size of 4, to access all 512 presets, you would need to set the upper limit to 128. 512/4=128. Your current upper limit is probably at 52. No bug ….
  91. m lebofsky

    FC HOLD sticky function

    I don't believe the Sticky Function is working as described. Can someone else verify?
Top Bottom